Difference between revisions of "BeagleBoardDebianWifiInstallInfo"
From eLinux.org
Geckosenator (Talk | contribs) |
m (Add link to category) |
||
| Line 1: | Line 1: | ||
| − | I have a zd1211 based wifi card. The installer did not detect it when I booted with the usb powered hub plugged into the otg port (which the card is plugged into) Instead I had to boot then plug the hub in after booted. | + | [[Category: Linux]] |
| + | [[Category: OMAP]] | ||
| + | I have a zd1211 based wifi card. The installer did not detect it when I booted with the usb powered hub plugged into the otg port (which the card is plugged into). Instead I had to boot then plug the hub in after booted. | ||
Next the installer cannot find the firmware driver. Select "Go Back" and "Execute shell" then mount a media with the firmware and copy it to /lib/firmware/`uname -r` Then exit the shell, and run the detect hardware step again.. now the wifi works and you can complete the install. | Next the installer cannot find the firmware driver. Select "Go Back" and "Execute shell" then mount a media with the firmware and copy it to /lib/firmware/`uname -r` Then exit the shell, and run the detect hardware step again.. now the wifi works and you can complete the install. | ||
Revision as of 15:01, 28 April 2009
I have a zd1211 based wifi card. The installer did not detect it when I booted with the usb powered hub plugged into the otg port (which the card is plugged into). Instead I had to boot then plug the hub in after booted.
Next the installer cannot find the firmware driver. Select "Go Back" and "Execute shell" then mount a media with the firmware and copy it to /lib/firmware/`uname -r` Then exit the shell, and run the detect hardware step again.. now the wifi works and you can complete the install.
