Difference between revisions of "BeagleBoardFedora"

From eLinux.org
Jump to: navigation, search
m (Bring the fedora wiki back from the DEAD... F13 works, (except yum can't find packages because it's eof) anywho, f15 will have armv5/7 packages so this wiki will get better..)
(Added instruction for setting up a new User.)
 
(3 intermediate revisions by 2 users not shown)
Line 5: Line 5:
 
http://fedoraproject.org/wiki/Architectures/ARM
 
http://fedoraproject.org/wiki/Architectures/ARM
  
= Fedora 13 =
+
= Fedora 19 =
  
git clone git://github.com/RobertCNelson/fedora-media-builder.git
+
An image for the BeagleBoneBlack can be found here:
cd fedora-media-builder
+
  
Install script for Beagle Bx
+
http://parasense.fedorapeople.org/
sudo ./mk_mmc.sh --mmc /dev/sdX --uboot beagle_bx --distro f13
+
  
Install script for Beagle Cx, xM A/B/C
+
Note that an 8GB sdcard is required for this image.
sudo ./mk_mmc.sh --mmc /dev/sdX --uboot beagle --distro f13
+
  
Install script for BeagleBone A2/A3
+
== Setting Up A User ==
sudo ./mk_mmc.sh --mmc /dev/sdX --uboot bone --distro f13
+
At first boot you need to use a monitor and use the graphical initial-setup.
 
+
If you don't have a monitor - mount the sdcard and edit '/etc/passwd' and remove the 'x'
Install script for Panda
+
from the the line beginning with 'root'
sudo ./mk_mmc.sh --mmc /dev/sdX --uboot panda --distro f13
+
 
+
Note, on first boot depmod -a is called early, but no usb devices or any modules work, so after login prompt first appears just hit the reset button..
+
 
+
= Fedora 15 =
+

Latest revision as of 16:57, 16 August 2013

Random hacking notes for getting Fedora 13 to kinda work with the BeagleBoard. ;)

http://fedoraproject.org/wiki/Architectures/ARM

Fedora 19

An image for the BeagleBoneBlack can be found here:

http://parasense.fedorapeople.org/

Note that an 8GB sdcard is required for this image.

Setting Up A User

At first boot you need to use a monitor and use the graphical initial-setup. If you don't have a monitor - mount the sdcard and edit '/etc/passwd' and remove the 'x' from the the line beginning with 'root'