This page is about compiling Linux Kernel for BeagleBoard manually. Manually here does mean it isn't done by any development environment (e.g. OpenEmbedded), instead you type "make uImage" at the command line and will get a recent BeagleBoard kernel.
- Attention #1: If you just want a distribution for your BeagleBoard, i.e. something that just works, stop reading here. Have a look to development environments.
- Attention #2: If you are already using OpenEmbedded (OE) and you are fine with the kernel generated by this, stop reading here.
This page is intended for people wanting to compile a recent Linux kernel for BeagleBoard manually. Maybe because they are real kernel hackers and don't want OE "overhead". Or they have issues with OE. Or ... . Again, if you are not such a person, stop reading here.
Most recent Linux kernel is available by OMAP Linux git repository, which then is heavily patched by OE. Most of these patches are grabbed from OMAP Linux mailing list, but still not applied to recent git. So OE creates a kernel by taking git kernel and then applies a lot of patches. For OE tools, this is described by OE "receipes". Looking at these recipes for BeagleBoard, grabbing the patches OE applies and then doing the stuff manually (usually done by OE automatically) gives you the same kernel OE generates.
So this page describes how to get all the pieces OE uses for kernel compilation and then patch and compile kernel manually. As this page is only for experts, some details might be missing.
- Patch management system quilt is used to apply the large number of patches to Linux kernel. See How To Survive With Many Patches for an introduction to quilt.
- An ARM cross compiler to compile kernel.
We need (OMAP) kernel sources and basic OpenEmbedded system (containing the patches and recipe). Both we get by git.
Get basic OpenEmbedded system with steps described in OpenEmbedded and Bitbake install article (ignore the "export OE_HOME" part, we only want the OE source system). As of writing in June 2009 this downloads ~100MB.
After download finished, we are only interested in the recipe and patches for BeagleBoard kernel. This can be found in recipes/linux:
There, identify the most recent (kernel) recipe. While writing this article, for BeagleBoard this was
Note: If you are unsure which might be the correct one, grep all files in recipes/linux for
This should give you one .bb file.
This .bb file is the OE recipe used by OE to patch and build the kernel. Looking into it should give us something like:
... COMPATIBLE_MACHINE = "...|beagleboard|..." ... DEFAULT_PREFERENCE_beagleboard = "1" ... SRCREV = "58cf2f1425abfd3a449f9fe985e48be2d2555022" SRC_URI = "git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git;protocol=git \ file://defconfig" SRC_URI_append = " \ file://no-empty-flash-warnings.patch;patch=1 \ file://no-cortex-deadlock.patch;patch=1 \ file://read_die_ids.patch;patch=1 \ ...
This recipes gives us 4 infos:
- This recipe is the recent one for BeagleBoard :) (DEFAULT_PREFERENCE_*)
- The git hash for OMAP kernel we have to check out (SRCREV)
- Where we get the kernel from (SRC_URI) and which kernel config file to use
- The patches which have to be applied (in which order) (SRC_URI_append)
Now, looking into the directory with the same name as the .bb recipe file (linux-omap-2.6.29/) we find
- the kernel patches listed in the .bb recipe file
- in beagleboard sub directory the kernel configuration (linux-omap-2.6.29/beagleboard/defconfig)
- First get recent OMAP Linux kernel. This is done by fetching recent OMAP Linux kernel using git. And make sure you are able to build it (e.g. cross compiler is in place etc.).
- Check out version given by above recipe (SRCREV). E.g.
git checkout 58cf2f1425abfd3a449f9fe985e48be2d2555022
- Copy patches and defconfig to kernel sources. For this, in kernel main directory create a directory patches (this is used by quilt) and copy the patches from OE directory (e.g. recipes/linux/linux-omap-2.6.29/) to it. E.g.:
cp <path_to>/openembedded/recipes/linux/linux-omap-2.6.29/* <path_to>/patches/
- Go into patches directory, there create a file series (used by quilt) and add the patch description from above recipe (The 'SRC_URI_append' and 'SRC_URI_append_beagleboard' variables). This is done by removing leading file:// and trailing ;patch=1 \ from patch list and putting this list into series file. With above example, series file should look like:
> cd patches > cat series no-empty-flash-warnings.patch no-cortex-deadlock.patch read_die_ids.patch ...
Result of this should be a patches directory containing all patches described by series file:
> ls patches ... no-cortex-deadlock.patch no-empty-flash-warnings.patch ... series ...
- Now, go back into kernel main directory. There call
quilt push -a
This should result in quilt applying all patches from patches directory in the order described by series file to OMAP Linux kernel.
- Use defconfig from e.g. linux-omap-2.6.29/beagleboard/defconfig to configure your patched kernel. If you copied above all patches with sub directories, defconfig file should be in patches/beagleboard/defconfig now. E.g.:
cp patches/beagleboard/defconfig .config make menuconfig
- Compile your kernel and modules as you are used to it. E.g.:
export PATH=$PATH:~/CodeSourcery/Sourcery_G++_Lite/bin make -j4 uImage CROSS_COMPILE=arm-none-linux-gnueabi- ...
Result should be an uImage which is the same as if it would be compiled with OE.