Difference between revisions of "BeagleBoardUbuntu"

From eLinux.org
Jump to: navigation, search
m (Raring 13.04 armhf (development snapshot): missed 3..)
m (Method 1: Download a Complete Pre-Configured Image: 2015-08-17)
(119 intermediate revisions by 9 users not shown)
Line 4: Line 4:
 
[[Category: BeagleBoard]]
 
[[Category: BeagleBoard]]
 
''(For BeagleBoardAngstrom, click [[BeagleBoardAngstrom|here]].)''
 
''(For BeagleBoardAngstrom, click [[BeagleBoardAngstrom|here]].)''
 +
''(Should [[Beagleboard:Ubuntu On BeagleBone Black]] be merged into this page?)''
  
This page is about running a distribution (ARM [http://wiki.debian.org/ArmEabiPort EABI]) [http://www.ubuntu.com/ Ubuntu] at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Ubuntu distribution from the [[BeagleBoard#MMC.2FSD_boot|SD card]]. Since much of this page is generic, it has also be extended to help support devices such as the [[PandaBoard]] and [[BeagleBone]].
+
This page is about running a Linux distribution (ARM [https://wiki.debian.org/ArmEabiPort EABI]) [http://www.ubuntu.com/ Ubuntu] on the [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Ubuntu distribution from the [[BeagleBoard#MMC.2FSD_boot|SD card]]. Since much of this page is generic, it has also been extended to help support devices such as the [[PandaBoard]] and [[BeagleBone]].
  
 
* For the best experience, make sure you have an LCD/HDMI monitor attached to the BeagleBoard's HDMI port, 2 GB/4 GB/8 GB SD card, and a known good USB 2.0 hub with mouse and keyboard.
 
* For the best experience, make sure you have an LCD/HDMI monitor attached to the BeagleBoard's HDMI port, 2 GB/4 GB/8 GB SD card, and a known good USB 2.0 hub with mouse and keyboard.
Line 14: Line 15:
  
 
*Kernel related help:
 
*Kernel related help:
** [http://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
+
** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
 
** ''#beagle'': Beagle IRC on Freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
 
** ''#beagle'': Beagle IRC on Freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
** Kernel Tree's
+
** Kernel Trees
*** [https://github.com/RobertCNelson/stable-kernel/tree/v3.6.x Stable (3.2.x) branch]
+
*** [https://github.com/RobertCNelson/armv7-multiplatform/ v3.17.x kernel branch]
*** [https://github.com/RobertCNelson/stable-kernel/tree/v3.6.x Stable (3.6.x) branch]
 
 
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
 
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
  
Line 24: Line 24:
 
** ''#ubuntu-arm'': Ubuntu's ARM IRC on Freenode ([http://irclogs.ubuntu.com/ logs] -> year -> month -> day -> #ubuntu-arm.html)
 
** ''#ubuntu-arm'': Ubuntu's ARM IRC on Freenode ([http://irclogs.ubuntu.com/ logs] -> year -> month -> day -> #ubuntu-arm.html)
  
*When asking for help, please provide some debugging information:
+
*When requesting help, please provide some debugging information:
 
** U-Boot Version installed on board
 
** U-Boot Version installed on board
 
** Kernel Version: uname -a
 
** Kernel Version: uname -a
Line 33: Line 33:
  
 
Mainline U-Boot:
 
Mainline U-Boot:
* All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
+
* All older BeagleBoard (classic) Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions
 
* XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
 
* XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
 
* Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
 
* Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
Line 56: Line 56:
 
= Method 1: Download a Complete Pre-Configured Image =
 
= Method 1: Download a Complete Pre-Configured Image =
  
== Canonical/Ubuntu Images ==
+
== Demo Image ==
Support:
 
''#ubuntu-arm'': Ubuntu's ARM IRC on Freenode ([http://irclogs.ubuntu.com/ logs] -> year -> month -> day -> #ubuntu-arm.html)
 
  
Canonical only supports certain boards with images, at this moment.
+
* '''Advanced Users only''': Beagle xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform
*BeagleBoard xM -> "omap"
+
  git clone https://github.com/RobertCNelson/armv7-multiplatform.git
*PandaBoard & PandaBoard ES -> "omap4"
+
  cd armv7-multiplatform
https://wiki.ubuntu.com/ARM/OMAP
+
  git checkout origin/v4.1.x -b tmp
 
 
==Demo Image==
 
 
 
* These demonstration images contain a custom Mainline based kernel with experimental enhancements to the boards supported. They are usually updated about once a month, as new features/enhancements get added by the community. Currently, this image ships with two kernel's "x" which is for mainline omap3+ devices (BeagleBoard/PandaBoard) and the "psp" which is for specifically the BeagleBone, as much of the kernel support for this device is currently in a TI Git kernel tree on [http://arago-project.org arago-project]. The kernel is stress tested by a farm of Panda/Beagle's running 24/7 under a heavy load (building gcc trunk/mainline kernel).
 
 
 
* '''Advanced Users only''': Beagle/Panda Kernel source, used in these demo images: https://github.com/RobertCNelson/stable-kernel
 
  git clone git://github.com/RobertCNelson/stable-kernel.git
 
  cd stable-kernel
 
(Panda)
 
git checkout origin/v3.2.x -b v3.2.x
 
(Beagle/Panda ES)
 
  git checkout origin/v3.6.x -b v3.6.x
 
 
  ./build_kernel.sh
 
  ./build_kernel.sh
* '''Advanced Users only''': BeagleBone Kernel source, used in these demo images: https://github.com/RobertCNelson/linux-dev/tree/am33x-v3.2
+
* '''Advanced Users only''': BeagleBone/BeagleBone Black:  Kernel v4.1.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.1.y
  git clone git://github.com/RobertCNelson/linux-dev.git
+
  git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
  cd linux-dev
+
  cd ti-linux-kernel-dev
  git checkout origin/am33x-v3.2 -b am33x-v3.2
+
  git checkout origin/ti-linux-4.1.y -b tmp
 
  ./build_kernel.sh
 
  ./build_kernel.sh
* '''Advanced Users only''': Userspace, used in these demo images:
 
https://github.com/RobertCNelson/omap-image-builder
 
  
If the script in these demo images fail: email "bugs@rcn-ee.com" I need: terminal command, terminal log, distribution name, arch...
+
=== Ubuntu (14.04.3) ===
  
=== Quantal 12.10 armhf ===
+
Default username/password:
 +
*username: ubuntu
 +
*password: temppwd
  
 
Image Updated:
 
Image Updated:
*2012-11-29: r2
+
*2015-08-17
** Beagle/Panda ES: v3.6.8-x4 kernel
+
** Beagle/Beagle xM: v4.1.5-armv7-x2 kernel
** Panda: v3.2.34-x15 kernel (kernel bug, crashes with v3.6.x after a few hours)
+
** BeagleBone White/Black/Green: v4.1.5-ti-r10 kernel
** Bone: v.2.33-psp26 kernel (next release should be v3.7.x based)
+
** OMAP5432 uEVM: v4.1.5-ti-r10 kernel
*October 19th: r1
+
** BeagleBoard-X15: v4.1.5-ti-r10 kernel
** Beagle/Panda ES: v3.6.2-x3 kernel
+
*2015-07-08
** Panda: v3.2.32-x15 kernel (kernel bug, crashes with v3.6.x after a few hours)
+
** Beagle/Beagle xM: v4.1.1-armv7-x1 kernel
** Bone: v3.2.32-psp25 kernel
+
** BeagleBone/BeagleBone Black: v4.1.1-ti-r2 kernel
* September 27th: beta2
+
** OMAP5432 uEVM: v4.1.1-ti-r2 kernel
** Beagle/Panda: v3.2.30-x14 kernel
+
** BeagleBoard-X15: v4.1.1-ti-r2 kernel
** Bone: v3.2.30-psp23 kernel
+
*2015-06-11
* September 10th: beta1
+
** Beagle/Beagle xM: v4.1.0-rc7-armv7-x0 kernel
** Beagle/Panda: v3.2.28-x14 kernel
+
** BeagleBone/BeagleBone Black: v3.14.43-ti-r67 kernel
** Bone: v3.2.28-psp21 kernel (now with "backlight" support for CircuitCo LCD3)
+
** OMAP5432 uEVM: v3.14.43-ti-r67 kernel
 +
** BeagleBoard-X15: v3.14.43-ti-r67 kernel
  
 
Services Active:
 
Services Active:
  Note: Depending on your internal network these may work out the box
+
  Note: Depending on your internal network these may work out of the box
  Apache, Port 80: http://arm/
+
  Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
  SSH, Port 22: ssh ubuntu@arm
+
  SSH, Port 22: ssh ubuntu@arm.local (Bone: via usb) ubuntu@192.168.7.2
 
  Getty, Serial Port
 
  Getty, Serial Port
  
Default user: ubuntu pass: temppwd  
+
Default user: ubuntu pass: temppwd
  
 
Get prebuilt image:
 
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2015-08-17/elinux/ubuntu-14.04.3-console-armhf-2015-08-17.tar.xz
  
  wget http://rcn-ee.net/deb/rootfs/quantal/ubuntu-12.10-r2-minimal-armhf-2012-11-29.tar.xz
+
Verify Image with:
  mirrors (will take some time to update):
+
  md5sum ubuntu-14.04.3-console-armhf-2015-08-17.tar.xz
  wget http://ynezz.ibawizard.net/beagleboard/quantal/ubuntu-12.10-r2-minimal-armhf-2012-11-29.tar.xz
+
  2afc4a3b93e1ed1afca36aa6e5e90761 ubuntu-14.04.3-console-armhf-2015-08-17.tar.xz
  
Verify image with:  
+
Unpack Image:
  md5sum ubuntu-12.10-r2-minimal-armhf-2012-11-29.tar.xz
+
  tar xf ubuntu-14.04.3-console-armhf-2015-08-17.tar.xz
b0ee1964a3f8196f4f1a501d1d2ac83a  ubuntu-12.10-r2-minimal-armhf-2012-11-29.tar.xz
+
  cd ubuntu-14.04.3-console-armhf-2015-08-17
 
 
Unpack image:
 
tar xJf ubuntu-12.10-r2-minimal-armhf-2012-11-29.tar.xz
 
  cd ubuntu-12.10-r2-minimal-armhf-2012-11-29
 
  
 
If you don't know the location of your SD card:
 
If you don't know the location of your SD card:
 
  sudo ./setup_sdcard.sh --probe-mmc
 
  sudo ./setup_sdcard.sh --probe-mmc
  
You should see something like  
+
You should see something like:
  
 
  Are you sure? I don't see [/dev/idontknow], here is what I do see...
 
  Are you sure? I don't see [/dev/idontknow], here is what I do see...
Line 136: Line 120:
 
  fdisk -l:
 
  fdisk -l:
 
  Disk /dev/sda: 500.1 GB, 500107862016 bytes '''<- x86 Root Drive'''
 
  Disk /dev/sda: 500.1 GB, 500107862016 bytes '''<- x86 Root Drive'''
  Disk /dev/mmcblk0: 3957 MB, 3957325824 bytes '''<- MMC/SD card'''
+
  Disk /dev/sdd: 3957 MB, 3957325824 bytes '''<- MMC/SD card'''
 
   
 
   
  mount:
+
  lsblk:
  /dev/sda1 on / type ext4 (rw,errors=remount-ro,commit=0) '''<- x86 Root Partition'''
+
  NAME  MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
 +
sda      8:0    0 465.8G  0 disk
 +
├─sda1  8:1    0 446.9G  0 part / '''<- x86 Root Partition'''
 +
├─sda2  8:2    0    1K  0 part
 +
└─sda5  8:5    0  18.9G  0 part [SWAP]
 +
sdd      8:48  1  3.7G  0 disk
 +
├─sdd1  8:49  1    64M  0 part
 +
└─sdd2  8:50  1  3.6G  0 part
  
* In this example, we can see via mount, '''/dev/sda1''' is the x86 rootfs, therefore '''/dev/mmcblk0''' is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...
+
* In this example, we can see via mount, '''/dev/sda1''' is the x86 rootfs, therefore '''/dev/sdd''' is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...
  
Install image:
+
Install Image:
  
Quick install script for "board"
+
Quick install script for [board]
  sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot board
+
  sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
  
"board" options:
+
board options:
*BeagleBoard Ax/Bx - beagle_bx
+
*BeagleBoard Ax/Bx/Cx/Dx         - omap3-beagle
*BeagleBoard Cx/Dx - beagle_cx
+
*BeagleBoard xM                   - omap3-beagle-xm
*BeagleBoard xM   - beagle_xm
+
*BeagleBone White/Black/Green     - beaglebone
*BeagleBone Ax     - bone
+
*OMAP5432 uEVM                    - omap5-uevm
*PandaBoard Ax    - panda
+
*BeagleBoard-X15                  - am57xx-beagle-x15
*PandaBoard ES    - panda_es
 
  
 
So for the BeagleBoard xM:
 
So for the BeagleBoard xM:
  sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot beagle_xm
+
  sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
 
 
*Additional Options
 
** --rootfs <ext4 default>
 
** --swap_file <swap file size in MB's>
 
** --addon pico <ti pico projector>
 
** --svideo-ntsc <use ntsc over dvi for video)
 
** --svideo-pal <use pal over dvi for video)
 
 
 
You should now be able to unmount the SD card from you PC, insert into your Board, reboot and have the OS loaded.
 
 
 
For a basic '''framebuffer''' driven desktop environment: (make sure network is setup):
 
Ethernet: "sudo ifconfig -a" and "sudo dhclient usb1" or "sudo dhclient eth0"
 
Wireless: http://elinux.org/BeagleBoardUbuntu#Wifi_Networking_.28command_line.29
 
 
 
Then run:
 
/bin/bash /boot/uboot/tools/ubuntu/minimal_lxde_desktop.sh
 
 
 
Additional Expansion Options:
 
 
 
*Beagle xM with Leopard Imaging: li5m03
 
** http://shop.leopardimaging.com/product.sc?productId=17
 
Add "camera=li5m03" to uEnv.txt and run:
 
/boot/uboot/tools/pkgs/aptina-media-ctl-n-yavta.sh
 
/boot/uboot/tools/pkgs/aptina-test-capture.sh
 
  
 
Advanced: Build Image:
 
Advanced: Build Image:
  
Built with a fork of project-rootstock (ARM native mode, run directly on BeagleBoard), using a script from omap-image-builder:
+
  git clone https://github.com/RobertCNelson/omap-image-builder.git
 
 
  git clone git://github.com/RobertCNelson/omap-image-builder.git
 
 
  cd omap-image-builder
 
  cd omap-image-builder
  git checkout v2012.12-1 -b v2012.12-1
+
  git checkout v2015.08 -b tmp
touch release
 
./build_image.sh
 
  
=== Precise 12.04 armhf ===
+
Stable:
*Note: dropping after raring 2nd snapshot
 
Image Updated:
 
*2012-11-29
 
** Beagle/Panda ES: v3.6.8-x4 kernel
 
** Panda: v3.2.34-x15 kernel (kernel bug, crashes with v3.6.x after a few hours)
 
** Bone: v.2.33-psp26 kernel (next release should be v3.7.x based)
 
*October 19th: r8
 
** Beagle/Panda ES: v3.6.2-x3 kernel
 
** Panda: v3.2.32-x15 kernel (kernel bug, crashes with v3.6.x after a few hours)
 
** Bone: v3.2.32-psp25 kernel
 
*September 27th: r7
 
** Beagle/Panda: v3.2.30-x14 kernel
 
** Bone: v3.2.30-psp23 kernel
 
* September 10th: r16
 
** Beagle/Panda: v3.2.28-x14 kernel
 
** Bone: v3.2.28-psp21 kernel (now with "backlight" support for CircuitCo LCD3)
 
  
Services Active:
+
  ./RootStock-NG.sh -c rcn-ee_console_ubuntu_trusty_armhf
  Note: Depending on your internal network these may work out the box
 
Apache, Port 80: http://arm/
 
SSH, Port 22: ssh ubuntu@arm
 
Getty, Serial Port
 
  
Default user: ubuntu pass: temppwd
+
== Flasher ==
  
Get prebuilt image:
+
=== eMMC: BeagleBone Black/Green ===
  
wget http://rcn-ee.net/deb/rootfs/precise/ubuntu-12.04-r9-minimal-armhf-2012-11-29.tar.xz
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Ubuntu will now boot directly from eMMC.
  mirrors (will take some time to update):
 
wget http://ynezz.ibawizard.net/beagleboard/precise/ubuntu-12.04-r9-minimal-armhf-2012-11-29.tar.xz
 
  
Verify image with:  
+
Script for reference: (this is the script that writes to the eMMC)
  md5sum ubuntu-12.04-r9-minimal-armhf-2012-11-29.tar.xz
+
  https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
8ed60e5a86671366825f7adb1c0e7a27  ubuntu-12.04-r9-minimal-armhf-2012-11-29.tar.xz
 
  
Unpack image:
+
This script will only take about 5-6 Minutes after power on.
tar xJf ubuntu-12.04-r9-minimal-armhf-2012-11-29.tar.xz
 
cd ubuntu-12.04-r9-minimal-armhf-2012-11-29
 
  
If you don't know the location of your SD card:
+
Notes:
sudo ./setup_sdcard.sh --probe-mmc
+
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
  
You should see something like
+
User: ubuntu
 +
pass: temppwd
  
Are you sure? I Don't see [/dev/idontknow], here is what I do see...
+
Image Updated:
+
*2015-08-17
fdisk -l:
+
** BeagleBone Black/Green: v4.1.5-ti-r10 kernel
Disk /dev/sda: 500.1 GB, 500107862016 bytes '''<- x86 Root Drive'''
+
*2015-07-08
Disk /dev/mmcblk0: 3957 MB, 3957325824 bytes '''<- MMC/SD card'''
+
** BeagleBone Black/Green: v4.1.1-ti-r2 kernel
+
*2015-06-11
mount:
+
** BeagleBone Black/Green: v3.14.43-ti-r67 kernel
/dev/sda1 on / type ext4 (rw,errors=remount-ro,commit=0) '''<- x86 Root Partition'''
 
  
* In this example, we can see via mount, '''/dev/sda1''' is the x86 rootfs, therefore '''/dev/mmcblk0''' is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2015-08-17/flasher/BBB-eMMC-flasher-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz
 +
wget https://rcn-ee.com/rootfs/2015-08-17/flasher/BBB-eMMC-flasher-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.bmap
  
Install image:
+
Verify Image with:
 +
md5sum BBB-eMMC-flasher-ubuntu-14.04.3-console-armhf-2015-08-17-2gb*
 +
ae1e578f7978fb9b7826842c08534c15  BBB-eMMC-flasher-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.bmap
 +
cac8aecffa66578d2e9406e03a4cdf36  BBB-eMMC-flasher-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz
  
Quick install script for "board"
+
Linux: (bmaptool 3.2)
  sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot "board"
+
  sudo bmaptool copy --bmap BBB-eMMC-flasher-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.bmap \
 +
BBB-eMMC-flasher-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz /dev/sdX
  
"board" options:  
+
Linux: (dd)
*BeagleBoard Ax/Bx - beagle_bx
+
unxz BBB-eMMC-flasher-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz
*BeagleBoard Cx/Dx - beagle_cx
+
sudo dd if=./BBB-eMMC-flasher-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img of=/dev/sdX
*BeagleBoard xM    - beagle_xm
 
*BeagleBone Ax    - bone
 
*PandaBoard Ax    - panda
 
*PandaBoard ES    - panda_es
 
  
So for the BeagleBoard xM:
+
== raw microSD img ==
sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot beagle_xm
 
  
*Additional Options
+
=== BeagleBoard (classic) ===
** --rootfs <ext4 default>
 
** --swap_file <swap file size in MB's>
 
** --addon pico <ti pico projector>
 
** --svideo-ntsc <use ntsc over dvi for video)
 
** --svideo-pal <use pal over dvi for video)
 
  
You should now be able to unmount the SD card from you PC, insert into your board, reboot and have the OS loaded.
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
  
For a basic '''framebuffer''' driven desktop environment: (make sure network is setup):
+
User: ubuntu
Ethernet: "sudo ifconfig -a" and "sudo dhclient usb1" or "sudo dhclient eth0"
+
pass: temppwd
Wireless: http://elinux.org/BeagleBoardUbuntu#Wifi_Networking_.28command_line.29
 
  
Then run:
+
Auto partition resize:
  /bin/bash /boot/uboot/tools/ubuntu/minimal_lxde_desktop.sh
+
  cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
Additional Expansion Options:
 
 
*Beagle xM with Leopard Imaging: li5m03
 
** http://shop.leopardimaging.com/product.sc?productId=17
 
Add "camera=li5m03" to uEnv.txt and run:
 
/boot/uboot/tools/pkgs/aptina-media-ctl-n-yavta.sh
 
/boot/uboot/tools/pkgs/aptina-test-capture.sh
 
 
Advanced: Build Image:
 
 
Built with a fork of project-rootstock (ARM native mode, run directly on beagleboard), using a script from omap-image-builder:
 
 
git clone git://github.com/RobertCNelson/omap-image-builder.git
 
cd omap-image-builder
 
git checkout v2012.12-1 -b v2012.12-1
 
touch release
 
./build_image.sh
 
 
=== Raring 13.04 armhf (development snapshot) ===
 
 
Image Updated:
 
Image Updated:
*2012-11-29
+
*2015-08-17
** Beagle/Panda ES: v3.6.8-x4 kernel
+
** Beagle: v4.1.5-armv7-x2 kernel
** Panda: v3.2.34-x15 kernel (kernel bug, crashes with v3.6.x after a few hours)
+
*2015-07-08
** Bone: v3.2.33-psp26 kernel (next release should be v3.7.x based)
+
** Beagle: v4.1.1-armv7-x1 kernel
 +
*2015-06-11
 +
** Beagle: v4.1.0-rc7-armv7-x0 kernel
  
 
Get prebuilt image:
 
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bb-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz
 +
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bb-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.bmap
  
  wget http://rcn-ee.net/deb/rootfs/raring/ubuntu-raring-snapshot-minimal-2012-11-29.tar.xz
+
Verify Image with:
 +
md5sum bb-ubuntu-14.04.3-console-armhf-2015-08-17-2gb*
 +
e608a236e379ea814dd49971a293dba8 bb-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.bmap
 +
e608a236e379ea814dd49971a293dba8  bb-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz
  
Verify image with:  
+
Linux: (bmaptool 3.2)
  md5sum ubuntu-raring-snapshot-minimal-2012-11-29.tar.xz
+
  sudo bmaptool copy --bmap bb-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.bmap \
  6446224cab8dee94fee174f618096862  ubuntu-raring-snapshot-minimal-2012-11-29.tar.xz
+
  bb-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz /dev/sdX
  
Unpack image:
+
Linux: (dd)
  tar xJf ubuntu-raring-snapshot-minimal-2012-11-29.tar.xz
+
  unxz bb-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz
  cd ubuntu-raring-snapshot-minimal-2012-11-29
+
  sudo dd if=./bb-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img of=/dev/sdX
  
Then follow directions show above with the other images...
+
=== BeagleBoard xM ===
  
= Method 2: Use the NetInstall method=
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
  
You will need a 1&nbsp;GB/2&nbsp;GB SD card or greater.
+
User: ubuntu
Standard system : ~700&nbsp;MB
+
pass: temppwd
  
== Ubuntu 12.04 (Precise) ==
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
git clone git://github.com/RobertCNelson/netinstall.git
+
Image Updated:
cd netinstall
+
*2015-08-17
 +
** Beagle xM: v4.1.5-armv7-x2 kernel
 +
*2015-07-08
 +
** Beagle xM: v4.1.1-armv7-x1 kernel
 +
*2015-06-11
 +
** Beagle xM: v4.1.0-rc7-armv7-x0 kernel
  
Install script for "board"
+
Get prebuilt image:
  sudo ./mk_mmc.sh --mmc /dev/sdX --uboot "board" --distro precise-armhf
+
  wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bbxm-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz
 
+
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bbxm-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.bmap
"board" Options:  
 
*BeagleBoard Ax/Bx - beagle_bx
 
*BeagleBoard Cx    - beagle_cx
 
*BeagleBoard xMA/B/C    - beagle_xm
 
*BeagleBone Ax    - bone
 
*PandaBoard Ax - panda
 
*PandaBoard ES - panda_es
 
  
So for the BeagleBoard xM:
+
Verify Image with:
  sudo ./mk_mmc.sh --mmc /dev/sdX --uboot beagle_xm --distro precise-armhf
+
  md5sum bbxm-ubuntu-14.04.3-console-armhf-2015-08-17-2gb*
 +
a5f1bd47ce59c4456b34420f7abc72e2  bbxm-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.bmap
 +
63d5c01dd42f917d3b0c0e625a3ce81d  bbxm-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz
  
*Options:
+
Linux: (bmaptool 3.2)
**--uboot : beagle_bx, beagle, panda
+
sudo bmaptool copy --bmap bbxm-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.bmap \
**--distro : maverick, oneiric
+
bbxm-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz /dev/sdX
**--firmware : installs firmware
 
**--serial-mode : debian-installer uses Serial Port
 
  
Place SD card into BeagleBoard and boot:
+
Linux: (dd)
 +
unxz bbxm-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz
 +
sudo dd if=./bbxm-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img of=/dev/sdX
  
Configure the network:
+
=== BeagleBone White/Black/Green ===
usb0: USB net <- (usually the OTG port)
 
eth0: USB net <- (usually the smsc95xx adapter on the BeagleBoard and PandaBoard)
 
wlan0: Wifi <- Your USDB-Wi-Fi device..
 
  
Troubshooting: If boot fails..
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
*Hold the user button down to force booting from MMC
 
*Upgrade X-loader and U-boot [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
 
*Clear U-boot's Environment Variables in nand:
 
nand erase 260000 20000
 
  
NetInstall assumptions:
+
User: ubuntu
Continue with out Kernel Modules <yes>
+
pass: temppwd
Partition <Guided - use the largest continuous free space>
 
  
= Method 3: Manual Install (no automatic scripts)=
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
For this section, you can use the files from above:
+
Image Updated:
Demo Images: http://elinux.org/BeagleBoardUbuntu#Demo_Image
+
*2015-08-17
Rootstock: http://elinux.org/BeagleBoardUbuntu#Build_an_Ubuntu_root_file_system_with_RootStock
+
** BeagleBone White/Black/Green: v4.1.5-ti-r10 kernel
 +
*2015-07-08
 +
** BeagleBone White/Black/Green: v4.1.1-ti-r2 kernel
 +
*2015-06-11
 +
** BeagleBone White/Black/Green: v3.14.43-ti-r67 kernel
  
BUT it assumes you have your own kernel uImage/modules from any of the many sources..
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bone-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz
 +
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bone-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.bmap
  
== Partition SD Card ==
+
Verify Image with:
You will need a 1&nbsp;GB SD card or greater.
+
md5sum bone-ubuntu-14.04.3-console-armhf-2015-08-17-2gb*
  Standard Console System : ~286&nbsp;MB
+
  2b71ceb5cc1846ce4b7a6f4028ea15dc  bone-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.bmap
  + Desktop environment (lxde,gdm) : ~479&nbsp;MB
+
  7b24e7b9d336c3c9237ce81c0d151da5  bone-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz
  
Starting with an empty SD card and using gparted, create:
+
Linux: (bmaptool 3.2)
  50&nbsp;MiB Primary Partition, FAT16/FAT32
+
  sudo bmaptool copy --bmap bone-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.bmap \
  Rest as ext2/ext3/ext4/btrfs
+
  bone-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz /dev/sdX
  
First, blank the MMC card's partition table with parted: (/dev/sdX as an example)  
+
Linux: (dd)
  sudo parted -s /dev/sdX mklabel msdos
+
unxz bone-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz
 +
  sudo dd if=./bone-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img of=/dev/sdX
  
With fdisk: (note: GNU Fdisk doesn't work..)
+
=== OMAP5432 uEVM ===
sudo fdisk /dev/sdX << __EOF__
 
n
 
p
 
1
 
 
+64M
 
t
 
e
 
p
 
w
 
__EOF__
 
  
Make sure to set the partition boot flag
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
sudo parted --script /dev/sdX set 1 boot on
 
  
And format it as vfat:
+
User: ubuntu
sudo mkfs.vfat -F 16 /dev/sdX1 -n boot
+
pass: temppwd
  
The rootfs partition, doesn't need any special options, so just use fdisk, gparted, etc. to create and format your rootfs partition..
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
Gparted Example: http://nishanthmenon.blogspot.com/2008/08/how-to-boot-beagle.html
+
Image Updated:
 +
*2015-08-17
 +
** OMAP5432 uEVM: v4.1.5-ti-r10 kernel
 +
*2015-07-08
 +
** OMAP5432 uEVM: v4.1.1-ti-r2 kernel
 +
*2015-06-11
 +
** OMAP5432 uEVM: v3.14.43-ti-r67 kernel
  
== Boot Partition ==
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/omap5-uevm-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz
 +
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/omap5-uevm-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.bmap
  
Requirements:
+
Verify Image with:
 +
md5sum omap5-uevm-ubuntu-14.04.3-console-armhf-2015-08-17-2gb*
 +
4654bd0d7a44bfb704bf23b664f90ca3  omap5-uevm-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.bmap
 +
63e0421ce0327968742887a69fa1a085  omap5-uevm-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz
  
  Mount the fatfs partition of your SD card.
+
Linux: (bmaptool 3.2)
 +
sudo bmaptool copy --bmap omap5-uevm-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.bmap \
 +
  omap5-uevm-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz /dev/sdX
  
Mount such as: (/dev/sdX1 is the fat Boot Partition)
+
Linux: (dd)
  mkdir -p ./tmp
+
  unxz omap5-uevm-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz
  sudo mount /dev/sdX1 ./tmp
+
  sudo dd if=./omap5-uevm-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img of=/dev/sdX
  
=== MLO and U-Boot ===
+
=== BeagleBoard-X15 ===
  
==== Beagle/Beagle xM ====
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
Download and copy MLO and U-Boot from here:
 
  
First download "http://rcn-ee.net/deb/tools/beagleboard/MLO-beagleboard-v2012.10-r0" as MLO to the Boot Partition
+
User: ubuntu
Then download "http://rcn-ee.net/deb/tools/beagleboard/u-boot-beagleboard-v2012.10-r0.img" as u-boot.img to the Boot Partition
+
pass: temppwd
  
==== BeagleBone ====
+
Auto partition resize:
Download and copy MLO and U-Boot from here:
+
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
First download "http://rcn-ee.net/deb/tools/beaglebone/MLO-beaglebone-v2012.10-r1" as MLO to the Boot Partition
+
Image Updated:
Then download "http://rcn-ee.net/deb/tools/beaglebone/u-boot-beaglebone-v2012.10-r1.img" as u-boot.img to the Boot Partition
+
*2015-08-17
 +
** BeagleBoard-X15: v4.1.5-ti-r10 kernel
 +
*2015-07-08
 +
** BeagleBoard-X15: v4.1.1-ti-r2 kernel
 +
*2015-06-11
 +
** BeagleBoard-X15: v3.14.43-ti-r67 kernel
  
==== Panda/Panda ES ====
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bbx15-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz
 +
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bbx15-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.bmap
  
Download and copy MLO and U-Boot from here:
+
Verify Image with:
 +
md5sum bbx15-ubuntu-14.04.3-console-armhf-2015-08-17-2gb*
 +
e8933776189249a157286ff9ccd5cc84  bbx15-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.bmap
 +
0e4f3634134673b24bebfb5fc9e804bd  bbx15-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz
  
  First download "http://rcn-ee.net/deb/tools/pandaboard/MLO-pandaboard-v2012.10-r1" as MLO to the Boot Partition
+
Linux: (bmaptool 3.2)
  Then download "http://rcn-ee.net/deb/tools/pandaboard/u-boot-pandaboard-v2012.10-r1.img" as u-boot.img to the Boot Partition
+
  sudo bmaptool copy --bmap bbx15-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.bmap \
 +
  bbx15-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz /dev/sdX
  
=== U-Boot Boot Scripts ===
+
Linux: (dd)
The version of U-Boot installed or recommended to install uses boot scripts by default. This allows users to easily switch between multiple SD cards with different OS's with different parameters installed. Ubuntu/Debian requires a slight modification to the bootargs line vs. Angstrom, 'ro' vs 'rw'.
+
unxz bbx15-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz
 +
sudo dd if=./bbx15-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img of=/dev/sdX
  
fixrtc: (only uInitrd) Resets RTC based on last mount
+
= Method 2: Use the NetInstall method=
buddy=${buddy}: (both) Kernel Zippy1/2 Support
 
mpurate=${mpurate}: (recommended core clock)
 
  
==== boot.scr -> uEnv.txt ====
+
You will need a 1GB/2GB/4GB/8GB SD card or greater.
Newer version's of u-boot now look for a uEnv.txt file vs the older boot.scr, since most boards still use the older boot.scr here's an easy compatibility script:
+
Standard system : ~700&nbsp;MB
  
create a new file: uEnv.txt
+
Report Bugs/Issues to: https://github.com/RobertCNelson/netinstall/issues
bootenv=boot.scr
+
(anywhere else will be ignored..)
loaduimage=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}
 
mmcboot=echo Running boot.scr script from mmc ...; source ${loadaddr}
 
  
==== Beagle Bx/Cx ====
+
Download the netinstall script:
 +
git clone https://github.com/RobertCNelson/netinstall.git
 +
cd netinstall
  
create a new file: uEnv.txt
+
Currently supported Ubuntu distributions:
  console=ttyO2,115200n8
+
  --distro oneiric (11.10)
+
  --distro precise-armhf (12.04)
vram=12MB
+
  --distro quantal (12.10)
defaultdisplay=dvi
+
  --distro raring (13.04)
dvimode=1280x720MR-16@60
+
  --distro saucy (13.10)
 
optargs=console=tty0
 
 
mmcroot=/dev/mmcblk0p2 ro
 
mmcrootfstype=ext4 rootwait fixrtc
 
 
xyz_load_image=fatload mmc 0:1 0x80300000 zImage
 
xyz_load_initrd=fatload mmc 0:1 0x81600000 initrd.img; setenv initrd_size ${filesize}
 
  xyz_load_dtb=fatload mmc 0:1 0x815f0000 /dtbs/${dtb_file}
 
 
video_args=setenv video vram=${vram} omapfb.mode=${defaultdisplay}:${dvimode} omapdss.def_disp=${defaultdisplay}
 
  expansion_args=setenv expansion buddy=${buddy} buddy2=${buddy2} musb_hdrc.fifo_mode=5
 
  mmcargs=setenv bootargs console=${console} ${optargs} ${video} root=${mmcroot} rootfstype=${mmcrootfstype} ${expansion}
 
 
device_args=run video_args; run expansion_args; run mmcargs
 
 
#zImage and initrd.gz:
 
  xyz_mmcboot=run xyz_load_image; run xyz_load_initrd; echo Booting from mmc ...
 
loaduimage=run xyz_mmcboot; run device_args; bootz 0x80300000 0x81600000:${initrd_size}
 
 
#zImage only:
 
#xyz_mmcboot=run xyz_load_image; echo Booting from mmc ...
 
#loaduimage=run xyz_mmcboot; run device_args; bootz 0x80300000
 
  
==== Beagle xM ====
+
Device: <board> selection:
 +
*BeagleBoard Ax/Bx/Cx  - omap3-beagle
 +
*BeagleBoard xMA/B/C  - omap3-beagle-xm
 +
*BeagleBone Ax        - am335x-bone-serial
 +
*BeagleBone (DVI cape) - am335x-bone-video
 +
*BeagleBone Black      - am335x-boneblack
 +
*PandaBoard Ax    - omap4-panda
 +
*PandaBoard A4+    - omap4-panda-a4
 +
*PandaBoard ES    - omap4-panda-es
  
Create a new file: uEnv.txt
+
Installation script for new <board> selection: (slowly migrating all devices to this method)
  console=ttyO2,115200n8
+
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb <board> --distro <distro>
 
vram=12MB
 
defaultdisplay=dvi
 
dvimode=1280x720MR-16@60
 
 
optargs=console=tty0
 
 
mmcroot=/dev/mmcblk0p2 ro
 
mmcrootfstype=ext4 rootwait fixrtc
 
 
xyz_load_image=fatload mmc 0:1 0x80300000 zImage
 
xyz_load_initrd=fatload mmc 0:1 0x81600000 initrd.img; setenv initrd_size ${filesize}
 
xyz_load_dtb=fatload mmc 0:1 0x815f0000 /dtbs/${dtb_file}
 
 
video_args=setenv video vram=${vram} omapfb.mode=${defaultdisplay}:${dvimode} omapdss.def_disp=${defaultdisplay}
 
expansion_args=setenv expansion buddy=${buddy} buddy2=${buddy2} camera=${camera}
 
mmcargs=setenv bootargs console=${console} ${optargs} ${video} root=${mmcroot} rootfstype=${mmcrootfstype} ${expansion}
 
 
device_args=run video_args; run expansion_args; run mmcargs
 
 
#zImage and initrd.gz:
 
xyz_mmcboot=run xyz_load_image; run xyz_load_initrd; echo Booting from mmc ...
 
loaduimage=run xyz_mmcboot; run device_args; bootz 0x80300000 0x81600000:${initrd_size}
 
 
#zImage only:
 
#xyz_mmcboot=run xyz_load_image; echo Booting from mmc ...
 
#loaduimage=run xyz_mmcboot; run device_args; bootz 0x80300000
 
  
==== BeagleBone ====
+
So for the xM: with quantal:
 +
sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro quantal
  
Create a new file: uEnv.txt
+
*Other Options:
console=ttyO2,115200n8
+
**--firmware : installs firmware
+
**--serial-mode : debian-installer uses Serial Port
mmcroot=/dev/mmcblk0p2 ro
 
mmcrootfstype=ext4 rootwait fixrtc
 
 
xyz_load_image=fatload mmc 0:1 0x80300000 zImage
 
xyz_load_initrd=fatload mmc 0:1 0x81600000 initrd.img; setenv initrd_size ${filesize}
 
xyz_load_dtb=fatload mmc 0:1 0x815f0000 /dtbs/${dtb_file}
 
 
mmcargs=setenv bootargs console=${console} ${optargs} root=${mmcroot} rootfstype=${mmcrootfstype}
 
 
#zImage and initrd.gz:
 
xyz_mmcboot=run xyz_load_image; run xyz_load_initrd; echo Booting from mmc ...
 
loaduimage=run xyz_mmcboot; run mmcargs; bootz 0x80300000 0x81600000:${initrd_size}
 
 
#zImage only:
 
#xyz_mmcboot=run xyz_load_image; echo Booting from mmc ...
 
#loaduimage=run xyz_mmcboot; run mmcargs; bootz 0x80300000
 
  
==== Panda/Panda ES ====
+
Place SD card into BeagleBoard and boot:
  
Create a new file: uEnv.txt
+
Configure the network:
  console=ttyO2,115200n8
+
  usb0: USB net <- (usually the OTG port)
+
  eth0: USB net <- (usually the smsc95xx adapter on the BeagleBoard and PandaBoard)
vram=16MB
+
  wlan0: Wifi <- Your USDB-Wi-Fi device..  
defaultdisplay=dvi
 
dvimode=1280x720MR-16@60
 
 
optargs=console=tty0
 
   
 
mmcroot=/dev/mmcblk0p2 ro
 
mmcrootfstype=ext4 rootwait fixrtc
 
 
xyz_load_image=fatload mmc 0:1 0x80300000 zImage
 
xyz_load_initrd=fatload mmc 0:1 0x81600000 initrd.img; setenv initrd_size ${filesize}
 
xyz_load_dtb=fatload mmc 0:1 0x815f0000 /dtbs/${dtb_file}
 
 
video_args=setenv video vram=${vram} omapfb.mode=${defaultdisplay}:${dvimode} omapdss.def_disp=${defaultdisplay}
 
expansion_args=setenv expansion buddy=${buddy} buddy2=${buddy2}
 
mmcargs=setenv bootargs console=${console} ${optargs} ${video} root=${mmcroot} rootfstype=${mmcrootfstype} ${expansion}
 
 
device_args=run video_args; run expansion_args; run mmcargs
 
 
#zImage and initrd.gz:
 
  xyz_mmcboot=run xyz_load_image; run xyz_load_initrd; echo Booting from mmc ...
 
loaduimage=run xyz_mmcboot; run device_args; bootz 0x80300000 0x81600000:${initrd_size}
 
 
#zImage only:
 
#xyz_mmcboot=run xyz_load_image; echo Booting from mmc ...
 
#loaduimage=run xyz_mmcboot; run device_args; bootz 0x80300000
 
 
Umount the boot partition:
 
  
sudo umount ./tmp
+
See my notes for my testing procedure: https://github.com/RobertCNelson/netinstall/blob/master/test.Ubuntu
  
== RootFS Partition ==
+
Troubleshooting: If booting fails..
Root File System
+
*Hold the user button down to force booting from MMC
 +
*Upgrade X-loader and U-boot [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
 +
*Clear U-boot's Environment Variables in NAND:
 +
nand erase 260000 20000
  
Mount your SD card's larger root file system partition (assuming /dev/sdX2) and 'untar' the rootfs into it.
+
NetInstall assumptions:
 +
Assume asll <default>'s... Thanks you preseed.conf!!!
  
mkdir -p ./tmp
+
= Method 3: Manual Install (no automatic scripts)=
sudo mount /dev/sdX2 ./tmp
 
sudo tar xfp arm*-rootfs-*.tgz -C ./tmp
 
sudo umount ./tmp
 
  
== Ubuntu Bugs & Tweaks ==
+
Note, this section used to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
  
===Enable Network Access===
+
== Beagle/Beagle xM ==
 +
http://eewiki.net/display/linuxonarm/BeagleBoard
  
Modify /etc/network/interfaces
+
== BeagleBone ==
auto eth0
+
http://eewiki.net/display/linuxonarm/BeagleBone
iface eth0 inet dhcp
 
  
Manual: From the command line
+
== BeagleBone Black ==
  sudo ifconfig -a
+
  http://eewiki.net/display/linuxonarm/BeagleBone+Black
sudo dhclient ethX (or wlanX/etc..)
 
  
Additional network setup information can be found [[BeagleBoardUbuntuNetwork|HERE]].
+
== Panda/Panda ES ==
 +
http://eewiki.net/display/linuxonarm/PandaBoard
  
 
= Advanced =
 
= Advanced =
Line 606: Line 471:
 
==Install Latest Kernel Image==
 
==Install Latest Kernel Image==
  
===Script File===
+
Script:
 +
cd /opt/scripts/tools
 +
git pull
 +
 
 +
Stable:
 +
./update_kernel.sh
  
Latest Stable is: https://github.com/RobertCNelson/stable-kernel
+
Testing:
 +
./update_kernel.sh --beta-kernel
  
export DIST=oneiric  (options are lucid/maverick/natty/oneiric/precise/squeeze/wheezy)
+
Custom: (has to be on rcn-ee.net)
export ARCH=armel (options are armel/armhf (armhf only for precise))
+
  ./update_kernel.sh --kernel v3.8.13-bone69
 
Beagle/Panda
 
export BOARD=omap
 
 
BeagleBone
 
export BOARD=omap-psp
 
 
wget http://rcn-ee.net/deb/${DIST}-${ARCH}/LATEST-${BOARD}
 
  wget $(cat ./LATEST-${BOARD} | grep STABLE | awk '{print $3}')
 
/bin/bash install-me.sh
 
  
Reboot with your new uImage.
+
Reboot with your new Kernel Image.
  
 
== Upgrade X-loader and U-boot ==
 
== Upgrade X-loader and U-boot ==
Line 629: Line 490:
 
*Note: the functionality of the "X-Loader" project has been merged as u-boot spl.
 
*Note: the functionality of the "X-Loader" project has been merged as u-boot spl.
  
Compatible with old Ax, Bx, Cx, and Dx BeagleBoards
+
Compatibility with older Ax, Bx, Cx, and Dx BeagleBoards
  
Note: Sometimes on these older boards, you just have to clear out the stored U-Boot environment variables in nand to make this script work:
+
Note: Sometimes on these older boards, you just have to clear out the stored U-Boot environment variables in NAND to make this script work:
 
  nand erase 260000 20000
 
  nand erase 260000 20000
  
Or: To fully erase the NAND..
+
Or: To fully erase the entire NAND:
 
  nand erase.chip
 
  nand erase.chip
  
Requires MMC card..
+
Requires MMC card:
  
  git clone git://github.com/RobertCNelson/flasher.git
+
  git clone https://github.com/RobertCNelson/flasher.git
 
  cd flasher
 
  cd flasher
  
Line 648: Line 509:
 
  sudo ./mk_mmc.sh --mmc /dev/sdX --uboot beagle_cx
 
  sudo ./mk_mmc.sh --mmc /dev/sdX --uboot beagle_cx
  
  1: Plug Serial Cable in and Start Serial terminal program
+
  1: Plug-in a serial cable and start the serial terminal program
 
  2: Place MMC card in Beagle
 
  2: Place MMC card in Beagle
 
  3: Push and hold the user button
 
  3: Push and hold the user button
 
  4: Plug-in power
 
  4: Plug-in power
  5: Wait for U-Boot countdown to finish, and let off user button
+
  5: Wait for U-Boot countdown to finish, then release the user button
 
  6: Wait for flashing/script to end
 
  6: Wait for flashing/script to end
 
  7: Power down, remove and reformat MMC card to final OS
 
  7: Power down, remove and reformat MMC card to final OS
Line 659: Line 520:
 
  sudo ./mk_mmc.sh --probe-mmc
 
  sudo ./mk_mmc.sh --probe-mmc
  
You should see something like  
+
You should see something like:
  
 
  Are you sure? I don't see [/dev/idontknow], here is what I do see...
 
  Are you sure? I don't see [/dev/idontknow], here is what I do see...
Line 670: Line 531:
 
  /dev/sda1 on / type ext4 (rw,errors=remount-ro,commit=0) '''<- x86 Root Partition'''
 
  /dev/sda1 on / type ext4 (rw,errors=remount-ro,commit=0) '''<- x86 Root Partition'''
  
* In this example, we can see via mount, '''/dev/sda1''' is the x86 rootfs, therefore '''/dev/mmcblk0''' is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./mk_mmc.sh...
+
* In this example, we can see via mount, '''/dev/sda1''' is the x86 rootfs, therefore '''/dev/mmcblk0''' is the other drive in the system, which is the MMC/SD card that was inserted and should be used by the ./mk_mmc.sh script.
  
== SGX Video Acceleration ==
+
== SGX Drivers ==
  
=== SGX armel/armhf v3.4.x+ ===
+
=== SGX BeagleBone/BeagleBone Black ===
* Note: This is a still a work in progress, but so far all the basic sgx demos seem to work on my Beagle xM C...  Thanks to TI for the special armhf binaries!!! --[[User:RobertCNelson|RobertCNelson]] 19:48, 17 July 2012 (UTC)
 
  
* Test with: Precise/12.04 armhf demo image with v3.4.5-x1, desktop was lxde via: "sudo apt-get install lxde lxde-core lxde-icon-theme"
+
Note, these are FBDEV only, no xorg/x11/etc...
  
==== Re-Build Kernel and SGX Kernel Modules ====
+
Install sgx modules (3.14.x-ti or 4.1.x kernel):
git clone git://github.com/RobertCNelson/stable-kernel.git
+
  sudo apt-get install ti-sgx-es8-modules-`uname -r`
  cd stable-kernel
+
  sudo depmod -a `uname -r`
  git checkout origin/v3.6.x -b v3.6.x
+
  sudo update-initramfs -uk `uname -r`
  ./build_kernel.sh (and then follow the directions as the script runs...)
 
  
Build kernel
+
Build SGX userspace for 3.14.x-ti (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
  ./build_kernel.sh
+
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
 +
cd ti-linux-kernel-dev/
 +
git checkout origin/ti-linux-3.14.y -b tmp-sgx
 +
  ./sgx_create_package.sh
  
Build SGX modules
+
Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
  ./sgx_build_modules.sh
+
git clone https://github.com/RobertCNelson/bb-kernel.git
 +
cd bb-kernel/
 +
git checkout origin/am33x-v4.1 -b tmp-sgx
 +
  ./sgx_create_package.sh
  
Insert SD card, make sure to modify MMC in system.sh
+
Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install
./tools/install_image.sh
+
  sudo tar xfv GFX_5.01.01.02.tar.gz -C /
 
+
  cd /opt/gfxinstall/
Place SD card into the device and boot...
+
  sudo ./sgx-install.sh
cd /opt/sgx
 
sudo tar xf GFX_4.0*_libs.tar.gz
 
sudo ./install-sgx.sh
 
 
 
Reboot, check modules (lsmod):
 
Module                  Size  Used by
 
bufferclass_ti          5727  0
 
omaplfb                11512  0
 
pvrsrvkm              165208  2 bufferclass_ti,omaplfb
 
 
 
Blit Test:
 
ubuntu@omap:/usr/bin/armhf/es5.0$ ./sgx_blit_test
 
------------------ SGX 3D Blit test -----------------
 
----------------------- Start -----------------------
 
Call PVRSRVConnect with a valid argument:
 
  OK
 
Get number of devices from PVRSRVEnumerateDevices:
 
  OK
 
.... Reported 1 devices
 
.... Device Number  | Device Type
 
            0000    | PVRSRV_DEVICE_ID_SGX
 
Attempt to acquire device 0:
 
  OK
 
Getting SGX Client info
 
  OK
 
.... ui32ProcessID:1133
 
Display Class API: enumerate devices
 
  OK
 
PVRSRVEnumerateDeviceClass() returns 1 display device(s)
 
  OK
 
Display Class API: open device
 
  OK
 
Display Class API: Get display info
 
  OK
 
.... Name:PowerVR OMAP Linux Display Driver
 
.... MaxSwapChains:1
 
.... MaxSwapChainBuffers:1
 
.... MinSwapInterval:0
 
.... MaxSwapInterval:1
 
Display Class API: enumerate display formats
 
  OK
 
  OK
 
.... Display format 0 - Pixelformat:1
 
Display Class API: enumerate display dimensions
 
  OK
 
  OK
 
.... Display dimensions 0 - ByteStride:2560 Width:1280 Height:720
 
Attempt to create memory context for SGX:
 
  OK
 
.... Shared heap 0 - HeapID:0x7000000 DevVAddr:0x1000 Size:0x87fe000 Attr:0x2014200
 
.... Shared heap 1 - HeapID:0x7000001 DevVAddr:0xc800000 Size:0xfff000 Attr:0x2024200
 
.... Shared heap 2 - HeapID:0x7000002 DevVAddr:0xe400000 Size:0x7f000 Attr:0x2024200
 
.... Shared heap 3 - HeapID:0x7000003 DevVAddr:0xf000000 Size:0x3ff000 Attr:0x2024200
 
.... Shared heap 4 - HeapID:0x7000004 DevVAddr:0xf400000 Size:0x4ff000 Attr:0x2014200
 
.... Shared heap 5 - HeapID:0x7000005 DevVAddr:0xfc00000 Size:0x1ff000 Attr:0x2014200
 
.... Shared heap 6 - HeapID:0x7000006 DevVAddr:0xdc00000 Size:0x7ff000 Attr:0x2014200
 
.... Shared heap 7 - HeapID:0x7000007 DevVAddr:0xe800000 Size:0x7ff000 Attr:0x2014200
 
.... Shared heap 8 - HeapID:0x7000008 DevVAddr:0xd800000 Size:0x3ff000 Attr:0x2024200
 
.... Shared heap 9 - HeapID:0x7000009 DevVAddr:0x8800000 Size:0x0 Attr:0x2024200
 
.... Shared heap 10 - HeapID:0x700000a DevVAddr:0x8800000 Size:0x3fff000 Attr:0x2014200
 
Display Class API: get the system (primary) buffer
 
  OK
 
Display Class API: map display surface to SGX
 
  OK
 
Attempt to create transfer context for SGX:
 
  OK
 
Do a SRCCOPY blit to the bottom right quadrant of the display:
 
(bottom right quadrant should be red on blue background):
 
  OK
 
  OK
 
Do a SRCCOPY blit to the top left quadrant of the display:
 
(top left quadrant should be striped (r/g/b/w) on blue background):
 
  OK
 
  OK
 
Do a CUSTOMSHADER blit to the top right quadrant of the display:
 
(top right quadrant should be yellow):
 
0xb6acd000 (host) 0xf407000 (device): Device mem for custom shader program
 
0xb6acb000 (host) 0xf408000 (device): Device mem for texture
 
USE custom shader program: 0x28841001.c0000000 mov.end o0, sa0
 
  OK
 
Do a SRCCOPY blit with COLOUR DOWNSAMPLING from ARGB8888 to RGB565
 
and then present the RGB565 to the bottom right quadrant of the screen
 
  (bottom right quadrant should be a red gradient):
 
  OK
 
  OK
 
  OK
 
  OK
 
Free the off screen surfaces:
 
  OK
 
  OK
 
  OK
 
  OK
 
Destroy the transfer context:
 
  OK
 
Display Class API: unmap display surface from SGX
 
  OK
 
Destroy Device Memory Context
 
Display Class API: close the device
 
  OK
 
Release SGX Client Info:
 
  OK
 
Disconnect from services:
 
  OK
 
------------------ SGX 3D Blit test -----------------
 
------------------------ End ------------------------
 
 
 
=== SGX Legacy armel only upto v3.2.x ===
 
NOTE: this only works on BeagleBoard hardware, BeagleBone stuff is in development..
 
 
 
Requirements: stable-kernel (the Demo Images hosted on rcn-ee.net meet this requirement)
 
  https://github.com/RobertCNelson/stable-kernel
 
 
 
Note: Due to a bug (seems to only effect older Beagle Bx/Cx boards, use v3.0.8-x3 based kernels)
 
  https://github.com/RobertCNelson/stable-kernel/issues/8
 
  oneiric:
 
wget http://rcn-ee.net/deb/oneiric/v3.0.8-x3/install-me.sh
 
/bin/bash install-me.sh
 
 
 
==== SDK unPackage Script ====
 
 
 
Download the latest version of the "create_sgx_package.sh" script
 
2.6.37
 
wget https://raw.github.com/RobertCNelson/tools/master/x86/ti_omap/create_sgx_package_2.6.37.sh
 
2.6.38->3.2.x
 
wget https://raw.github.com/RobertCNelson/tools/master/x86/ti_omap/create_sgx_package_3.2.x.sh
 
 
 
Make script executable
 
chmod a+x ./create_sgx_package_*.sh
 
 
 
Run script
 
./create_sgx_package_*.sh
 
 
 
After Successfully running:
 
 
 
:~/temp$ ls
 
create_sgx_package.sh
 
GFX_X_XX_XX_XX_libs.tar.gz                      : -> Copy to Beagle (System Libs)
 
GFX_Linux_SDK.tar.gz                            : -> Copy to Beagle (DEMO's)
 
Graphics_SDK_setuplinux_X_XX_XX_XX.bin
 
SDK
 
SDK_BIN
 
 
 
==== Beagle: GFX_*_libs.tar.gz ====
 
 
 
tar xf GFX_4_00_00_01_libs.tar.gz  (extracts install-SGX.sh and run-SGX.sh)
 
./install-SGX.sh (copies necessary SGX libs and startup script)
 
./run-SGX.sh (force run the new init script, or you can just reboot...)
 
 
 
On successful install:
 
Stopping PVR
 
Starting PVR
 
Starting SGX fixup for ES2.x (or ES3.x) (or ES5.x xM)
 
 
 
Reboot for good measure (Maverick's Alpha-1 needs this....)
 
 
  sudo reboot
 
  sudo reboot
  
==== Beagle: GFX_Linux_SDK.tar.gz ====
+
Verify omaplfb & pvrsrvkm loaded
 
+
  debian@arm:~$ lsmod | grep omaplfb
tar xf GFX_Linux_SDK.tar.gz
+
  omaplfb                12065 0
cd GFX_Linux_SDK
+
  pvrsrvkm              178782 1 omaplfb
tar xf OGLES.tar.gz
 
 
 
==== Test SGX with a DEMO ====
 
 
 
cd OGLES/SDKPackage/Binaries/CommonX11/Demos/EvilSkull
 
./OGLESEvilSkull
 
 
 
==== Trouble Shooting ====
 
 
 
sudo rm /etc/powervr-esrev
 
sudo depmod -a omaplfb
 
  sudo /etc/init.d/pvr restart
 
 
 
== DSP ==
 
 
 
=== gst-dsp ===
 
 
 
The following Gstreamer elements will be installed:
 
 
 
  $ gst-inspect | grep dsp
 
  dvdspu:  dvdspu: Sub-picture Overlay
 
  dsp:  dspdummy: DSP dummy element
 
  dsp:  dspvdec: DSP video decoder
 
  dsp:  dspadec: DSP audio decoder
 
  dsp:  dsph263enc: DSP video encoder
 
  dsp:  dspmp4venc: DSP MPEG-4 video encoder
 
  dsp:  dspjpegenc: DSP video encoder
 
  dsp:  dsph264enc: DSP video encoder
 
  dsp:  dspvpp: DSP VPP filter
 
  dsp:  dspipp: DSP IPP
 
 
 
Please note that h264 encoder (dsph264enc) will not work because of missing h264venc_sn.dll64P DSP part. [http://groups.google.com/group/omapdiscuss/msg/76d928726656c5fe According to this message], it is not available due to a licensing restriction.
 
 
 
Requirements: Kernel built with: "CONFIG_TIDSPBRIDGE=m", for reference, here is what rcn-ee.net's image/deb's are configured for:
 
voodoo@beagle-xma-512mb:~$ zcat /proc/config.gz | grep TIDSP
 
  CONFIG_TIDSPBRIDGE=m
 
  CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE=0x600000
 
  # CONFIG_TIDSPBRIDGE_DEBUG is not set
 
  CONFIG_TIDSPBRIDGE_RECOVERY=y
 
# CONFIG_TIDSPBRIDGE_CACHE_LINE_CHECK is not set
 
CONFIG_TIDSPBRIDGE_WDT3=y
 
CONFIG_TIDSPBRIDGE_WDT_TIMEOUT=5
 
# CONFIG_TIDSPBRIDGE_NTFY_PWRERR is not set
 
# CONFIG_TIDSPBRIDGE_BACKTRACE is not
 
 
 
On the xM: if 3.2.x is too jerky, try 3.4.x and use the create_dsp_package.sh script, as the module changed..
 
 
 
Download the latest version of the "create_dsp_package.sh" script
 
wget https://github.com/RobertCNelson/stable-kernel/raw/master/create_dsp_package.sh
 
 
 
for 3.4.x+
 
wget https://raw.github.com/RobertCNelson/stable-kernel/v3.4.x/create_dsp_package.sh
 
 
 
Make script executable
 
chmod a+x ./create_dsp_package.sh
 
 
 
Package script:
 
./create_dsp_package.sh
 
 
 
Copy DSP_Install_libs.tar.gz to Beagle
 
 
 
Setup network...
 
 
 
Extract:
 
tar xf DSP_Install_libs.tar.gz
 
 
 
Install
 
./install-DSP.sh
 
 
 
Build gst-dsp stuff..
 
./install-gst-dsp.sh
 
 
 
Start dspbridge (or just reboot)
 
sudo /etc/init.d/dsp start
 
 
 
Test dspbridge
 
sudo dsp-test
 
 
 
Playbin:
 
sudo gst-launch playbin2 uri=file://(file)
 
 
 
Example: (using http://www.bigbuckbunny.org/index.php/download/ 854x480 mp4 )
 
Note: it seems broken in Ubuntu precise armhf...
 
 
 
sudo gst-launch playbin2 uri=file:///home/USER/big_buck_bunny_480p_surround-fix.avi
 
 
 
Screenshot: (on my xm it's a little jerky at the moment, investigating..)
 
http://rcn-ee.net/bugs/dsp/dsp_v3.2.1-x2-test.jpg
 
 
 
== Xorg omapfb Drivers ==
 
 
 
By default Ubuntu will try to use the FBDEV video driver, however for the BeagleBoard we can take advantage of a more software optimized driver (still not using the sgx video hardware) using the NEON extensions of the Cortex-A8 core.
 
 
 
cat /var/log/Xorg.0.log | grep FBDEV
 
(II) FBDEV: driver for framebuffer: fbdev
 
(II) FBDEV(0): using default device
 
(II) FBDEV(0): Creating default Display subsection in Screen section
 
(==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
 
(==) FBDEV(0): RGB weight 565
 
 
 
Login into Ubuntu and open a new terminal, xorg has to be running..
 
  
xvinfo -display :0.0
+
== Xorg Drivers ==
X-Video Extension version 2.2
 
screen #0
 
  no adaptors present
 
  
=== Drivers ===
+
Script:
 
+
  cd /opt/scripts/tools/
Note: These are built with neon optimizations: http://git.debian.org/?p=collab-maint/xf86-video-omapfb.git;a=blob;f=debian/rules;h=c2f0d5391c96c5abb60b1e691ad86bb27e0c17d8;hb=HEAD  (line 48/49)
+
  git pull
 
 
Lucid:
 
  sudo apt-get install xserver-xorg-video-omap3
 
 
 
To verify it was correctly installed, reboot and:
 
 
 
cat /var/log/Xorg.0.log | grep omapfb
 
(II) LoadModule: "omapfb"
 
(II) Loading /usr/lib/xorg/modules/drivers//omapfb_drv.so
 
(II) Module omapfb: vendor="X.Org Foundation"
 
  (II) omapfb: Driver for OMAP framebuffer (omapfb) and external LCD controllers:
 
(WW) Error opening /sys/devices/platform/omapfb/ctrl/name: No such file or directory
 
(II) omapfb(0): VideoRAM: 1800KiB (SDRAM)
 
(II) omapfb(0): Creating default Display subsection in Screen section
 
(**) omapfb(0): Depth 16, (--) framebuffer bpp 16
 
(==) omapfb(0): RGB weight 565
 
(==) omapfb(0): Default visual is TrueColor
 
(--) omapfb(0): Virtual size is 1280x720 (pitch 1280)
 
(**) omapfb(0):  Built-in mode "current"
 
(==) omapfb(0): DPI set to (96, 96)
 
(II) omapfb(0): DPMS enabled
 
(II) omapfb(0): Video plane capabilities:
 
(II) omapfb(0): Video plane supports the following image formats:
 
(II) omapfb(0): XVideo extension initialized
 
 
 
Login into Ubuntu and open a new terminal, xorg has to be running..
 
 
 
xvinfo -display :0.0
 
X-Video Extension version 2.2
 
screen #0
 
  Adaptor #0: "OMAP XV adaptor"
 
    number of ports: 1
 
    port base: 56
 
    operations supported: PutImage
 
    supported visuals:
 
      depth 16, visualID 0x21
 
    number of attributes: 1
 
    etc..
 
 
 
== Changing DVI output resolution ==
 
 
 
Ubuntu 10.10 above defaults to a resolution of 1284x768@16. This is set in the boot.cmd file in the boot partition of the SD card. To change the resolution the DVI output, edit boot.cmd accordingly then recreate the boot.scr file by:
 
 
 
mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "Ubuntu 10.10" -d ./boot.cmd ./boot.scr
 
 
 
Then reboot the BeagleBoard.
 
 
 
== S-Video ==
 
''(For configuring S-Video on Angstrom, click [[BeagleBoardAngstrom#Configuring_uEnv.txt_to_set_s-video_as_the_default_display|here]])''.
 
 
 
===Process for setting up S-Video===
 
 
 
S-video is tested to be working on 2.6.35-rc5-dl9. BeagleBoard s-video output has traditionally been enabled by "using bootargs (boot arguments) at uboot". In newer versions of the BeagleBoard, the developers have made things easier by instructing U-Boot to look for a .scr file about a dozen lines long that is called cmd.boot.scr, and then follow said parameters. In Angstrom, no boot.scr file is needed, instead, an even easier system is used, where a simple editable .txt file called uEnv.txt containing these parameters suffices (Env is for "environment"). For some reason, in the Ubuntu download files, typically there a bit of convoluted process where uEnv.txt is called up, uEnv.txt says "Go read conf.boot.scr", and cmd.boot.scr sets up the s-video.
 
 
 
To make cmd.boot.scr, create a text file named cmd.boot, then convert it into a .scr file with mkimage by running the following commands on the terminal:
 
 
 
First, you will probably need to get mkimage with apt-get. Run
 
 
 
    sudo apt-get install mkimage
 
 
 
Next, convert your cmd.boot.scr
 
 
 
    mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n 'Execute uImage' -d boot.cmd boot.scr
 
 
 
===Bootargs: make this cmd.boot to set s-video===
 
 
 
* NTSC
 
 
 
    omapfb.mode='''tv:ntsc'''
 
    omapdss.def_disp='''tv'''
 
 
 
Bootargs that has been validated.
 
 
 
    setenv bootargs 'console=tty0 console=ttyO2,115200n8 root=/dev/mmcblk0p2 rootwait ro vram=12M omapfb.mode=tv:ntsc omapdss.def_disp=tv
 
    fixrtc buddy=unknown'
 
 
 
===Screen cutoff problem===
 
 
 
NTSC resolution is supposed to be 640x480. However the edge bands around the TV screen differ from TV to TV. Output of '''fbset''' shown below:
 
 
 
    mode "720x482-30"
 
        # D: 13.500 MHz, H: 15.734 kHz, V: 29.970 Hz
 
        geometry 720 482 720 482 32
 
        timings 74074 16 58 6 31 64 6
 
        rgba 8/16,8/8,8/0,0/0
 
    endmode
 
 
 
Depending on your TV device, and what desktop you are running a certain amount of screen cutoff is likely to occur. This is called [http://en.wikipedia.org/wiki/Overscan overscan]. Typically, around 5-10% of the left and right edges of display are off the screen (using Ubuntu with xfce). This seems to be due to the fact that there is only one display resolution that is set for NTSC: <!-- I don't know about PAL--> 720 X 482. It is not possible to change this setting in the xfce4 Settings Manager like one would normally be able to do, because other options are greyed out/do not exist. Normally, even if the Settings Manager did not allow for it, a different resolution setting could be obtained by editing the xorg.conf file in /etc/X11/xorg.conf-4, or some similar place. HOWEVER there is no xorg.conf file in the Beagle version of xfce. xrandr shows the display is set to the minimum of 720x574. Adding an xorg.conf does not fix the problem, because Beagle takes its (analog) display resolution settings directly from the display driver, where 720 X 480 (720 X 574 for PAL <!-- This I gather, but I really don't know--> ) is hard coded in. 
 
 
 
An inelegant but usable workaround for the xfce desktop environment is simply to create vertical and horizontal panels that fill up the space that is cut off on the screen. This is not a complete solution, but at least it will prevent maximized windows from going off into nowhere land.
 
 
 
Truly fixing this would involve going into the display driver and reprogramming it to include additional S-video settings besides just NTSC and PAL. Specifically, to make the whole framebuffer fit on the screen you would need to adjust the overlay in the display driver, the OMAP DSS2. (Didn't test this yet. Some pointers from the driver's documentation below)
 
 
 
    /sys/devices/platform/omapdss/overlay? directory:
 
    enabled 0=off, 1=on
 
    input_size width,height (ie. the framebuffer size)
 
    manager Destination overlay manager name
 
    name
 
    output_size width,height
 
    position x,y
 
    screen_width width
 
    global_alpha  global alpha 0-255 0=transparent 255=opaque
 
 
 
== Building Kernel ==
 
 
 
https://github.com/RobertCNelson/stable-kernel
 
 
 
Download SRC
 
git clone git://github.com/RobertCNelson/stable-kernel.git
 
 
 
Build kernel
 
./build_kernel.sh
 
  
Optional building the deb file
+
BeagleBoard/PandaBoard:
  ./build_deb.sh
+
cd /opt/scripts/tools/graphics/
 +
  ./ti-omapdrm.sh
  
 +
BeagleBone/BeagleBone Black:
 +
cd /opt/scripts/tools/graphics/
 +
./ti-tilcdc.sh
  
 
= Swapfile =
 
= Swapfile =
Line 1,086: Line 585:
 
== Using a File for Swap Instead of a Partition ==
 
== Using a File for Swap Instead of a Partition ==
  
On the Bealgeboard you should expect to need a swap file given the limitation of how much RAM they have (between 256&nbsp;MB and 512&nbsp;MB). Some system programs like apt-get will only run properly when some swap space is present (due to 256&nbsp;MB not being enough RAM).
+
On the Beagleboard you should expect to require a swap file given the limitation of how little RAM is available (between 256&nbsp;MB and 512&nbsp;MB). Some system programs like apt-get will only run properly when some swap space is present (due to 256&nbsp;MB not being enough RAM).
  
Some images such as those from Linaro.org do not come with a swap partition or any swap space allocated.
+
Some images (such as those from Linaro.org) do not come with a swap partition or any swap space allocated.
  
Under Linux swap space can be either a dedicated partition or a single file. Both can be mounted as swap which the OS can access.
+
Under Linux, swap space can be either a dedicated partition or a swap file. Both can be mounted as swap which the OS can access.
  
 
=== Creating a Swapfile ===
 
=== Creating a Swapfile ===
  
The following commands will create a 1 gigabyte file, lock access to only root, format it as swap and then advertise it to the OS.
+
The following commands will create a 1 GB file, limit access only to root, format it as swap and then make it available to the OS:
  
 
  sudo mkdir -p /var/cache/swap/   
 
  sudo mkdir -p /var/cache/swap/   
Line 1,102: Line 601:
 
  sudo swapon /var/cache/swap/swapfile  
 
  sudo swapon /var/cache/swap/swapfile  
  
To ask the OS to load this swapfile on each start up, edit the /etc/fstab file to include the following additional line:
+
To tell the OS to load this swapfile on each start up, edit the /etc/fstab file to include the following additional line:
  
 
  /var/cache/swap/swapfile    none    swap    sw    0  0
 
  /var/cache/swap/swapfile    none    swap    sw    0  0
  
To verify that the swapfile is accessilble as swap to the OS, run "top" of "htop" at a console.
+
To verify that the swapfile is accessilble as swap to the OS, run "top" or "htop" at a console.
  
 
= Ubuntu Software =
 
= Ubuntu Software =
Line 1,114: Line 613:
 
=== /etc/network/interfaces ===
 
=== /etc/network/interfaces ===
  
It is possible and relatively easy to configure a Wi-Fi card from the command line.
+
It is relatively easy to configure a Wi-Fi card from the command line.
  
 
You will need to edit the /etc/network/interfaces file. There are several guides available via Google.
 
You will need to edit the /etc/network/interfaces file. There are several guides available via Google.
  
This is a particularly useful guide http://ubuntuforums.org/showthread.php?t=202834  
+
This is a particularly useful guide https://ubuntuforums.org/showthread.php?t=202834  
  
 
A sample /etc/network/interfaces file for a WPA2 encrypted access point is:
 
A sample /etc/network/interfaces file for a WPA2 encrypted access point is:
Line 1,133: Line 632:
 
  wpa-group CCMP
 
  wpa-group CCMP
 
  wpa-key-mgmt WPA-PSK
 
  wpa-key-mgmt WPA-PSK
  wpa-psk < INSERT KEY XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX>
+
  wpa-psk <INSERT KEY XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX>
  
Your Wi-Fi card will automatically load these settings on start up and give network access.
+
Your Wi-Fi card will automatically load these settings upon startup and initialize wireless network access.
  
 
== Lightweight window managers ==
 
== Lightweight window managers ==
Line 1,141: Line 640:
 
If you intend to use Ubuntu on the BeagleBoard you can install JWM or IceWM to improve performance.
 
If you intend to use Ubuntu on the BeagleBoard you can install JWM or IceWM to improve performance.
  
JWM in particular uses little RAM. On a BeagleBoard with 256&nbsp;MB, using JWM will leave about 60&nbsp;MB free to run applications in.
+
JWM in particular uses little RAM. On a BeagleBoard with 256&nbsp;MB, using JWM will leave about 60&nbsp;MB free in which to run applications.
  
 
== Web Apps ==
 
== Web Apps ==
  
 
=== Midori ===
 
=== Midori ===
Given that the BeagleBoard has fewer resources than a desktop a light-weight browser is more responsive. Midori is a light-weight browser that still supports flash, etc. It is available from the standard repositories.
+
Given that the BeagleBoard has fewer resources than a desktop a lightweight browser is more responsive. Midori is a lightweight browser that still supports flash, etc. It is available from the standard repositories:
 
http://en.wikipedia.org/wiki/Midori_%28web_browser%29
 
http://en.wikipedia.org/wiki/Midori_%28web_browser%29
  
Line 1,154: Line 653:
 
If you have a video source (webcam, IP cam, etc.) which appears as /dev/video0, etc. then you can use the Linux surveillance software "motion" to monitor the video stream and record periods of activity.
 
If you have a video source (webcam, IP cam, etc.) which appears as /dev/video0, etc. then you can use the Linux surveillance software "motion" to monitor the video stream and record periods of activity.
  
Motion is also available from the standard repositories.
+
Motion is also available from the standard repositories:
 
http://www.debian-administration.org/article/An_Introduction_to_Video_Surveillance_with_%27Motion%27
 
http://www.debian-administration.org/article/An_Introduction_to_Video_Surveillance_with_%27Motion%27
 
Using a 960x720 resolution webcam with a 15&nbsp;fps rate under the UVC driver the Rev C BeagleBoard under Xubuntu reports ~60% CPU utilisation.
 
Using a 960x720 resolution webcam with a 15&nbsp;fps rate under the UVC driver the Rev C BeagleBoard under Xubuntu reports ~60% CPU utilisation.
  
To make the BeagleBoard automatically start recording on boot do the following:
+
To make the BeagleBoard automatically start recording on boot, do the following:
  
 
* Auto Login - run "gdmsetup" from a terminal and select a user to automatically login  
 
* Auto Login - run "gdmsetup" from a terminal and select a user to automatically login  
 
* Sessions - make sure you don't save any previous X Windows sessions so that it doesn't prompt you for which one you want
 
* Sessions - make sure you don't save any previous X Windows sessions so that it doesn't prompt you for which one you want
* motion.conf - amend /etc/motion/motion.conf to the settings you want (that is, video output directory, record only video, record in MPEG-4, set frame rate, etc). Do this with "sudo medit /etc/motion/motion.conf" at a prompt.
+
* motion.conf - edit /etc/motion/motion.conf to use the settings you want (that is, video output directory, record only video, record in MPEG-4, set frame rate, etc). Do this with "sudo medit /etc/motion/motion.conf" at a prompt.
* Boot script - create a new script in /etc/rc2.d called "S65motion_client" and set permissions appropriately ("sudo chmod 777 /etc/rc2.d/S65motion_client"). Then edit the file so it has the following text in it:
+
* Boot script - create a new script in /etc/rc2.d called "S65motion_client" and set permissions appropriately ("sudo chmod 777 /etc/rc2.d/S65motion_client"). Then edit the file so it contains the following lines:
  
 
  #! /bin/sh
 
  #! /bin/sh
Line 1,170: Line 669:
 
This will now launch the motion client as root when you boot up.
 
This will now launch the motion client as root when you boot up.
  
Also note that unless your BeagleBoard can remember the time (battery backed up clock installed) the timestamps will not be correct until you update the time. If your BeagleBoard has an Internet connection this can be achieved with the ntpdate application.
+
Also note that unless your BeagleBoard can remember the time (battery backed up clock installed), the timestamps will not be correct until you update the time. If your BeagleBoard has an Internet connection this can be achieved using the ntpdate application.
  
 
== Robotics ==
 
== Robotics ==
  
 
=== ROS ===
 
=== ROS ===
Willow Garage hosts the open source Robotic Operating System (ROS). Whilst it is natively supported in Ubuntu, the official packages are only for the x86 platform. ROS can be installed from source and is generally easy to do so (although slow).
+
ROS (Robot Operating System) provides libraries and tools to help software developers create robot applications. It provides hardware abstraction, device drivers, libraries, visualizers, message-passing, package management, and more. ROS is licensed under an open source, BSD license.
  
Following the instructions from here will build and install ROS on your BeagleBoard:
+
There are currently builds of ROS for Ubuntu Trusty armhf. These builds include most but not all packages, and save a considerable amount of time compared to doing a full source-based installation:
  
http://www.ros.org/wiki/cturtle/Installation/Ubuntu/SVN
+
http://wiki.ros.org/indigo/Installation/UbuntuARM
  
You will need an Internet connection for your BeagleBoard for these scripts to work.
+
Alternatively ROS can be installed from source and is generally easy to do so (although slow).
  
 
For more information about ROS, see www.ros.org.
 
For more information about ROS, see www.ros.org.

Revision as of 07:24, 18 August 2015

(For BeagleBoardAngstrom, click here.) (Should Beagleboard:Ubuntu On BeagleBone Black be merged into this page?)

This page is about running a Linux distribution (ARM EABI) Ubuntu on the BeagleBoard. BeagleBoard will boot the (ARM EABI) Ubuntu distribution from the SD card. Since much of this page is generic, it has also been extended to help support devices such as the PandaBoard and BeagleBone.

  • For the best experience, make sure you have an LCD/HDMI monitor attached to the BeagleBoard's HDMI port, 2 GB/4 GB/8 GB SD card, and a known good USB 2.0 hub with mouse and keyboard.

Help

If you need any help:

  • Ubuntu related help:
    • #ubuntu-arm: Ubuntu's ARM IRC on Freenode (logs -> year -> month -> day -> #ubuntu-arm.html)
  • When requesting help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Required Beagle Software

Mainline U-Boot:

  • All older BeagleBoard (classic) Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Omap Serial Changes

boot.scr/boot.cmd changes:

With 2.6.35:

console=ttyS2,115200n8

With 2.6.36/37+:

console=ttyO2,115200n8

Serial console login: /etc/init/ttyO2.conf

start on stopped rc RUNLEVEL=[2345]
stop on runlevel [!2345]

respawn
exec /sbin/getty 115200 ttyO2

Method 1: Download a Complete Pre-Configured Image

Demo Image

git clone https://github.com/RobertCNelson/armv7-multiplatform.git
cd armv7-multiplatform
git checkout origin/v4.1.x -b tmp
./build_kernel.sh
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev
git checkout origin/ti-linux-4.1.y -b tmp
./build_kernel.sh

Ubuntu (14.04.3)

Default username/password:

  • username: ubuntu
  • password: temppwd

Image Updated:

  • 2015-08-17
    • Beagle/Beagle xM: v4.1.5-armv7-x2 kernel
    • BeagleBone White/Black/Green: v4.1.5-ti-r10 kernel
    • OMAP5432 uEVM: v4.1.5-ti-r10 kernel
    • BeagleBoard-X15: v4.1.5-ti-r10 kernel
  • 2015-07-08
    • Beagle/Beagle xM: v4.1.1-armv7-x1 kernel
    • BeagleBone/BeagleBone Black: v4.1.1-ti-r2 kernel
    • OMAP5432 uEVM: v4.1.1-ti-r2 kernel
    • BeagleBoard-X15: v4.1.1-ti-r2 kernel
  • 2015-06-11
    • Beagle/Beagle xM: v4.1.0-rc7-armv7-x0 kernel
    • BeagleBone/BeagleBone Black: v3.14.43-ti-r67 kernel
    • OMAP5432 uEVM: v3.14.43-ti-r67 kernel
    • BeagleBoard-X15: v3.14.43-ti-r67 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
SSH, Port 22: ssh ubuntu@arm.local (Bone: via usb) ubuntu@192.168.7.2
Getty, Serial Port

Default user: ubuntu pass: temppwd

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-08-17/elinux/ubuntu-14.04.3-console-armhf-2015-08-17.tar.xz

Verify Image with:

md5sum ubuntu-14.04.3-console-armhf-2015-08-17.tar.xz
2afc4a3b93e1ed1afca36aa6e5e90761  ubuntu-14.04.3-console-armhf-2015-08-17.tar.xz

Unpack Image:

tar xf ubuntu-14.04.3-console-armhf-2015-08-17.tar.xz
cd ubuntu-14.04.3-console-armhf-2015-08-17

If you don't know the location of your SD card:

sudo ./setup_sdcard.sh --probe-mmc

You should see something like:

Are you sure? I don't see [/dev/idontknow], here is what I do see...

fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive
Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card

lsblk:
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 465.8G  0 disk 
├─sda1   8:1    0 446.9G  0 part /  <- x86 Root Partition
├─sda2   8:2    0     1K  0 part 
└─sda5   8:5    0  18.9G  0 part [SWAP]
sdd      8:48   1   3.7G  0 disk 
├─sdd1   8:49   1    64M  0 part 
└─sdd2   8:50   1   3.6G  0 part 
  • In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm
  • BeagleBone White/Black/Green - beaglebone
  • OMAP5432 uEVM - omap5-uevm
  • BeagleBoard-X15 - am57xx-beagle-x15

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2015.08 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_ubuntu_trusty_armhf

Flasher

eMMC: BeagleBone Black/Green

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Ubuntu will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: ubuntu pass: temppwd

Image Updated:

  • 2015-08-17
    • BeagleBone Black/Green: v4.1.5-ti-r10 kernel
  • 2015-07-08
    • BeagleBone Black/Green: v4.1.1-ti-r2 kernel
  • 2015-06-11
    • BeagleBone Black/Green: v3.14.43-ti-r67 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-08-17/flasher/BBB-eMMC-flasher-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-08-17/flasher/BBB-eMMC-flasher-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.bmap

Verify Image with:

md5sum BBB-eMMC-flasher-ubuntu-14.04.3-console-armhf-2015-08-17-2gb*
ae1e578f7978fb9b7826842c08534c15  BBB-eMMC-flasher-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.bmap
cac8aecffa66578d2e9406e03a4cdf36  BBB-eMMC-flasher-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap BBB-eMMC-flasher-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.bmap \
BBB-eMMC-flasher-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz /dev/sdX

Linux: (dd)

unxz BBB-eMMC-flasher-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz
sudo dd if=./BBB-eMMC-flasher-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img of=/dev/sdX

raw microSD img

BeagleBoard (classic)

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: ubuntu pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-08-17
    • Beagle: v4.1.5-armv7-x2 kernel
  • 2015-07-08
    • Beagle: v4.1.1-armv7-x1 kernel
  • 2015-06-11
    • Beagle: v4.1.0-rc7-armv7-x0 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bb-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bb-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.bmap

Verify Image with:

md5sum bb-ubuntu-14.04.3-console-armhf-2015-08-17-2gb*
e608a236e379ea814dd49971a293dba8  bb-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.bmap
e608a236e379ea814dd49971a293dba8  bb-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap bb-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.bmap \
bb-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz /dev/sdX

Linux: (dd)

unxz bb-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz
sudo dd if=./bb-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img of=/dev/sdX

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: ubuntu pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-08-17
    • Beagle xM: v4.1.5-armv7-x2 kernel
  • 2015-07-08
    • Beagle xM: v4.1.1-armv7-x1 kernel
  • 2015-06-11
    • Beagle xM: v4.1.0-rc7-armv7-x0 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bbxm-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bbxm-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.bmap

Verify Image with:

md5sum bbxm-ubuntu-14.04.3-console-armhf-2015-08-17-2gb*
a5f1bd47ce59c4456b34420f7abc72e2  bbxm-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.bmap
63d5c01dd42f917d3b0c0e625a3ce81d  bbxm-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap bbxm-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.bmap \
bbxm-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz /dev/sdX

Linux: (dd)

unxz bbxm-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz
sudo dd if=./bbxm-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img of=/dev/sdX

BeagleBone White/Black/Green

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: ubuntu pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-08-17
    • BeagleBone White/Black/Green: v4.1.5-ti-r10 kernel
  • 2015-07-08
    • BeagleBone White/Black/Green: v4.1.1-ti-r2 kernel
  • 2015-06-11
    • BeagleBone White/Black/Green: v3.14.43-ti-r67 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bone-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bone-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.bmap

Verify Image with:

md5sum bone-ubuntu-14.04.3-console-armhf-2015-08-17-2gb*
2b71ceb5cc1846ce4b7a6f4028ea15dc  bone-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.bmap
7b24e7b9d336c3c9237ce81c0d151da5  bone-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap bone-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.bmap \
bone-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz /dev/sdX

Linux: (dd)

unxz bone-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz
sudo dd if=./bone-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img of=/dev/sdX

OMAP5432 uEVM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: ubuntu pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-08-17
    • OMAP5432 uEVM: v4.1.5-ti-r10 kernel
  • 2015-07-08
    • OMAP5432 uEVM: v4.1.1-ti-r2 kernel
  • 2015-06-11
    • OMAP5432 uEVM: v3.14.43-ti-r67 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-08-17/microsd/omap5-uevm-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/omap5-uevm-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.bmap

Verify Image with:

md5sum omap5-uevm-ubuntu-14.04.3-console-armhf-2015-08-17-2gb*
4654bd0d7a44bfb704bf23b664f90ca3  omap5-uevm-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.bmap
63e0421ce0327968742887a69fa1a085  omap5-uevm-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap omap5-uevm-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.bmap \
omap5-uevm-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz /dev/sdX

Linux: (dd)

unxz omap5-uevm-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz
sudo dd if=./omap5-uevm-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img of=/dev/sdX

BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: ubuntu pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2015-08-17
    • BeagleBoard-X15: v4.1.5-ti-r10 kernel
  • 2015-07-08
    • BeagleBoard-X15: v4.1.1-ti-r2 kernel
  • 2015-06-11
    • BeagleBoard-X15: v3.14.43-ti-r67 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bbx15-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz
wget https://rcn-ee.com/rootfs/2015-08-17/microsd/bbx15-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.bmap

Verify Image with:

md5sum bbx15-ubuntu-14.04.3-console-armhf-2015-08-17-2gb*
e8933776189249a157286ff9ccd5cc84  bbx15-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.bmap
0e4f3634134673b24bebfb5fc9e804bd  bbx15-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap bbx15-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.bmap \
bbx15-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz /dev/sdX

Linux: (dd)

unxz bbx15-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img.xz
sudo dd if=./bbx15-ubuntu-14.04.3-console-armhf-2015-08-17-2gb.img of=/dev/sdX

Method 2: Use the NetInstall method

You will need a 1GB/2GB/4GB/8GB SD card or greater.

Standard system : ~700 MB

Report Bugs/Issues to: https://github.com/RobertCNelson/netinstall/issues (anywhere else will be ignored..)

Download the netinstall script:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Currently supported Ubuntu distributions:

--distro oneiric (11.10)
--distro precise-armhf (12.04)
--distro quantal (12.10)
--distro raring (13.04)
--distro saucy (13.10)

Device: <board> selection:

*BeagleBoard Ax/Bx/Cx  - omap3-beagle
*BeagleBoard xMA/B/C   - omap3-beagle-xm
*BeagleBone Ax         - am335x-bone-serial
*BeagleBone (DVI cape) - am335x-bone-video
*BeagleBone Black      - am335x-boneblack
*PandaBoard Ax     - omap4-panda
*PandaBoard A4+    - omap4-panda-a4
*PandaBoard ES     - omap4-panda-es

Installation script for new <board> selection: (slowly migrating all devices to this method)

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb <board> --distro <distro>

So for the xM: with quantal:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro quantal
  • Other Options:
    • --firmware : installs firmware
    • --serial-mode : debian-installer uses Serial Port

Place SD card into BeagleBoard and boot:

Configure the network:

usb0: USB net <- (usually the OTG port)
eth0: USB net <- (usually the smsc95xx adapter on the BeagleBoard and PandaBoard)
wlan0: Wifi <- Your USDB-Wi-Fi device.. 

See my notes for my testing procedure: https://github.com/RobertCNelson/netinstall/blob/master/test.Ubuntu

Troubleshooting: If booting fails..

  • Hold the user button down to force booting from MMC
  • Upgrade X-loader and U-boot Upgrade X-loader and U-Boot
  • Clear U-boot's Environment Variables in NAND:
nand erase 260000 20000

NetInstall assumptions:

Assume asll <default>'s... Thanks you preseed.conf!!!

Method 3: Manual Install (no automatic scripts)

Note, this section used to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Advanced

Install Latest Kernel Image

Script:

cd /opt/scripts/tools
git pull

Stable:

./update_kernel.sh

Testing:

./update_kernel.sh --beta-kernel

Custom: (has to be on rcn-ee.net)

./update_kernel.sh --kernel v3.8.13-bone69

Reboot with your new Kernel Image.

Upgrade X-loader and U-boot

  • Note: the functionality of the "X-Loader" project has been merged as u-boot spl.

Compatibility with older Ax, Bx, Cx, and Dx BeagleBoards

Note: Sometimes on these older boards, you just have to clear out the stored U-Boot environment variables in NAND to make this script work:

nand erase 260000 20000

Or: To fully erase the entire NAND:

nand erase.chip

Requires MMC card:

git clone https://github.com/RobertCNelson/flasher.git
cd flasher

For the Beagle Ax/Bx

sudo ./mk_mmc.sh --mmc /dev/sdX --uboot beagle_bx

For the Beagle Cx/Dx

sudo ./mk_mmc.sh --mmc /dev/sdX --uboot beagle_cx
1: Plug-in a serial cable and start the serial terminal program
2: Place MMC card in Beagle
3: Push and hold the user button
4: Plug-in power
5: Wait for U-Boot countdown to finish, then release the user button
6: Wait for flashing/script to end
7: Power down, remove and reformat MMC card to final OS

If you don't know the location of your SD card:

sudo ./mk_mmc.sh --probe-mmc

You should see something like:

Are you sure? I don't see [/dev/idontknow], here is what I do see...

fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive
Disk /dev/mmcblk0: 3957 MB, 3957325824 bytes <- MMC/SD card

mount:
/dev/sda1 on / type ext4 (rw,errors=remount-ro,commit=0) <- x86 Root Partition
  • In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/mmcblk0 is the other drive in the system, which is the MMC/SD card that was inserted and should be used by the ./mk_mmc.sh script.

SGX Drivers

SGX BeagleBone/BeagleBone Black

Note, these are FBDEV only, no xorg/x11/etc...

Install sgx modules (3.14.x-ti or 4.1.x kernel):

sudo apt-get install ti-sgx-es8-modules-`uname -r`
sudo depmod -a `uname -r`
sudo update-initramfs -uk `uname -r`

Build SGX userspace for 3.14.x-ti (must be done on an x86, due to the TI 5.01.01.02 blob extractor)

git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev/
git checkout origin/ti-linux-3.14.y -b tmp-sgx
./sgx_create_package.sh

Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)

git clone https://github.com/RobertCNelson/bb-kernel.git
cd bb-kernel/
git checkout origin/am33x-v4.1 -b tmp-sgx
./sgx_create_package.sh

Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install

sudo tar xfv GFX_5.01.01.02.tar.gz -C /
cd /opt/gfxinstall/
sudo ./sgx-install.sh
sudo reboot

Verify omaplfb & pvrsrvkm loaded

debian@arm:~$ lsmod | grep omaplfb
omaplfb                12065  0 
pvrsrvkm              178782  1 omaplfb

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

Swapfile

Using a File for Swap Instead of a Partition

On the Beagleboard you should expect to require a swap file given the limitation of how little RAM is available (between 256 MB and 512 MB). Some system programs like apt-get will only run properly when some swap space is present (due to 256 MB not being enough RAM).

Some images (such as those from Linaro.org) do not come with a swap partition or any swap space allocated.

Under Linux, swap space can be either a dedicated partition or a swap file. Both can be mounted as swap which the OS can access.

Creating a Swapfile

The following commands will create a 1 GB file, limit access only to root, format it as swap and then make it available to the OS:

sudo mkdir -p /var/cache/swap/   
sudo dd if=/dev/zero of=/var/cache/swap/swapfile bs=1M count=1024
sudo chmod 0600 /var/cache/swap/swapfile 
sudo mkswap /var/cache/swap/swapfile 
sudo swapon /var/cache/swap/swapfile 

To tell the OS to load this swapfile on each start up, edit the /etc/fstab file to include the following additional line:

/var/cache/swap/swapfile    none    swap    sw    0   0

To verify that the swapfile is accessilble as swap to the OS, run "top" or "htop" at a console.

Ubuntu Software

Wi-Fi Networking (command line)

/etc/network/interfaces

It is relatively easy to configure a Wi-Fi card from the command line.

You will need to edit the /etc/network/interfaces file. There are several guides available via Google.

This is a particularly useful guide https://ubuntuforums.org/showthread.php?t=202834

A sample /etc/network/interfaces file for a WPA2 encrypted access point is:

auto lo
iface lo inet loopback
auto wlan0
iface wlan0 inet dhcp
wpa-driver wext
wpa-ssid <NAME OF AP>
wpa-ap-scan 1
wpa-proto RSN
wpa-pairwise CCMP
wpa-group CCMP
wpa-key-mgmt WPA-PSK
wpa-psk <INSERT KEY XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX>

Your Wi-Fi card will automatically load these settings upon startup and initialize wireless network access.

Lightweight window managers

If you intend to use Ubuntu on the BeagleBoard you can install JWM or IceWM to improve performance.

JWM in particular uses little RAM. On a BeagleBoard with 256 MB, using JWM will leave about 60 MB free in which to run applications.

Web Apps

Midori

Given that the BeagleBoard has fewer resources than a desktop a lightweight browser is more responsive. Midori is a lightweight browser that still supports flash, etc. It is available from the standard repositories: http://en.wikipedia.org/wiki/Midori_%28web_browser%29

Surveillance

Motion

If you have a video source (webcam, IP cam, etc.) which appears as /dev/video0, etc. then you can use the Linux surveillance software "motion" to monitor the video stream and record periods of activity.

Motion is also available from the standard repositories: http://www.debian-administration.org/article/An_Introduction_to_Video_Surveillance_with_%27Motion%27 Using a 960x720 resolution webcam with a 15 fps rate under the UVC driver the Rev C BeagleBoard under Xubuntu reports ~60% CPU utilisation.

To make the BeagleBoard automatically start recording on boot, do the following:

  • Auto Login - run "gdmsetup" from a terminal and select a user to automatically login
  • Sessions - make sure you don't save any previous X Windows sessions so that it doesn't prompt you for which one you want
  • motion.conf - edit /etc/motion/motion.conf to use the settings you want (that is, video output directory, record only video, record in MPEG-4, set frame rate, etc). Do this with "sudo medit /etc/motion/motion.conf" at a prompt.
  • Boot script - create a new script in /etc/rc2.d called "S65motion_client" and set permissions appropriately ("sudo chmod 777 /etc/rc2.d/S65motion_client"). Then edit the file so it contains the following lines:
#! /bin/sh
/usr/bin/motion -c /etc/motion/motion.conf

This will now launch the motion client as root when you boot up.

Also note that unless your BeagleBoard can remember the time (battery backed up clock installed), the timestamps will not be correct until you update the time. If your BeagleBoard has an Internet connection this can be achieved using the ntpdate application.

Robotics

ROS

ROS (Robot Operating System) provides libraries and tools to help software developers create robot applications. It provides hardware abstraction, device drivers, libraries, visualizers, message-passing, package management, and more. ROS is licensed under an open source, BSD license.

There are currently builds of ROS for Ubuntu Trusty armhf. These builds include most but not all packages, and save a considerable amount of time compared to doing a full source-based installation:

http://wiki.ros.org/indigo/Installation/UbuntuARM

Alternatively ROS can be installed from source and is generally easy to do so (although slow).

For more information about ROS, see www.ros.org.