Difference between revisions of "BeagleBoardUbuntu"

From eLinux.org
Jump to: navigation, search
m (Manually Setup SD Card: cleanup space)
m (Method 1: Download a Complete Pre-Configured Image: 2016-01-14)
(386 intermediate revisions by 17 users not shown)
Line 3: Line 3:
 
[[Category:Development Boards]]
 
[[Category:Development Boards]]
 
[[Category: BeagleBoard]]
 
[[Category: BeagleBoard]]
This page is about running a (ARM EABI) [http://www.ubuntu.com/ Ubuntu] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Ubuntu distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]].
+
''(For BeagleBoardAngstrom, click [[BeagleBoardAngstrom|here]].)''
 +
''(Should [[Beagleboard:Ubuntu On BeagleBone Black]] be merged into this page?)''
  
Note: for the best experience, make sure you have an LCD attached to the HDMI port, 2GB/4GB/8GB SD card, and a known good usb2.0 hub with mouse and keyboard.
+
This page is about running a Linux distribution (ARM [https://wiki.debian.org/ArmEabiPort EABI]) [http://www.ubuntu.com/ Ubuntu] on the [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Ubuntu distribution from the [[BeagleBoard#MMC.2FSD_boot|SD card]]. Since much of this page is generic, it has also been extended to help support devices such as the [[PandaBoard]] and [[BeagleBone]].
 +
 
 +
* For the best experience, make sure you have an LCD/HDMI monitor attached to the BeagleBoard's HDMI port, 2 GB/4 GB/8 GB SD card, and a known good USB 2.0 hub with mouse and keyboard.
  
 
= Help =
 
= Help =
Line 12: Line 15:
  
 
*Kernel related help:
 
*Kernel related help:
** [http://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
+
** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
+
** ''#beagle'': Beagle IRC on Freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
** [https://launchpad.net/~beagleboard-kernel Launchpad Project "Beagleboard Kernel"]
+
** Kernel Trees
*** [https://code.launchpad.net/~beagleboard-kernel/+junk/2.6-stable Stable Kernel 2.6.35 src]
+
*** [https://github.com/RobertCNelson/armv7-multiplatform/ v3.17.x kernel branch]
*** [https://code.launchpad.net/~beagleboard-kernel/+junk/2.6.36-devel Development Kernel src]
+
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
** [http://elinux.org/BeagleBoardUbuntuKernel Kernel Testing Results]
 
  
 
*Ubuntu related help:
 
*Ubuntu related help:
** ''#ubuntu-arm'': Ubuntu's arm irc on freenode ([http://irclogs.ubuntu.com/ logs] -> year -> month -> day -> #ubuntu-arm.html)
+
** ''#ubuntu-arm'': Ubuntu's ARM IRC on Freenode ([http://irclogs.ubuntu.com/ logs] -> year -> month -> day -> #ubuntu-arm.html)
  
*When asking for help, please provide some debugging information:
+
*When requesting help, please provide some debugging information:
 
** U-Boot Version installed on board
 
** U-Boot Version installed on board
 
** Kernel Version: uname -a
 
** Kernel Version: uname -a
Line 30: Line 32:
 
= Required Beagle Software =  
 
= Required Beagle Software =  
  
X-loader/MLO (1.4.4ss) & U-Boot (2010.03) (Zippy1 & Zippy2 Support)
+
Mainline U-Boot:
* All Bx, C2/3/4 Boards are required to upgrade to atleast these MLO and U-Boot versions.
+
* All older BeagleBoard (classic) Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions
* XM Boards have no NAND, so u-boot.bin is always required on the first partition
+
* XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
 
* Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
 
* Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
  
= Canonical Pre-Installed Images =
+
= Omap Serial Changes =
  
Support:
+
boot.scr/boot.cmd changes:
* ''#ubuntu-arm'': Ubuntu's arm irc on freenode ([http://irclogs.ubuntu.com/ logs] -> year -> month -> day -> #ubuntu-arm.html)
 
  
== Maverick 10.10 ==
+
With 2.6.35:
 +
console=ttyS2,115200n8
  
Just follow https://wiki.ubuntu.com/ARM/OMAPMaverickInstall and make sure you're using a SD card >= 4GB.
+
With 2.6.36/37+:
 +
console=ttyO2,115200n8
  
=Demo Image=
+
Serial console login: /etc/init/ttyO2.conf
 +
start on stopped rc RUNLEVEL=[2345]
 +
stop on runlevel [!2345]
 +
 +
respawn
 +
exec /sbin/getty 115200 ttyO2
  
Note, these Demo Images contain a kernel with experimental options for the omap family...  If you'd like to use ubuntu's supported
+
= Method 1: Download a Complete Pre-Configured Image =
kernel, just read "/etc/flash-kernel.conf" and disable the rcn-ee variable.  Then install the ubuntu kernel and flash-kernel packages to overwrite.
 
  
== Maverick 10.10 ==
+
== Demo Image ==
  
Image updated Nov 10, better xM B support
+
* '''Advanced Users only''': BeagleBoard xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform
 +
git clone https://github.com/RobertCNelson/armv7-multiplatform.git
 +
cd armv7-multiplatform
 +
git checkout origin/v4.4.x -b tmp
 +
./build_kernel.sh
 +
* '''Advanced Users only''': BeagleBone/BeagleBone Black:  Kernel v4.1.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.1.y
 +
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
 +
cd ti-linux-kernel-dev
 +
git checkout origin/ti-linux-rt-4.1.y -b tmp
 +
./build_kernel.sh
  
Default user: ubuntu pass: temppwd
+
=== Ubuntu (14.04.3) ===
  
Get prebuilt image:
+
Default username/password:
 +
*username: ubuntu
 +
*password: temppwd
  
wget http://rcn-ee.net/deb/rootfs/maverick/ubuntu-10.10-r2-minimal-armel.tar.7z
+
Image Updated:
mirrors (will take some time to update):
+
*2016-01-14
wget http://ynezz.ibawizard.net/beagleboard/maverick/ubuntu-10.10-r2-minimal-armel.tar.7z
+
** BeagleBoard xM: v4.4.0-armv7-x3 kernel
wget http://vivaphp.net/beagle/maverick/ubuntu-10.10-r2-minimal-armel.tar.7z
+
** BeagleBone White/Black/Green: v4.1.15-ti-rt-r40 kernel
 +
** OMAP5432 uEVM: v4.1.15-ti-rt-r40 kernel
 +
** BeagleBoard-X15: v4.1.15-ti-rt-r40 kernel
 +
*2015-12-11
 +
** BeagleBoard xM: v4.3.2-armv7-x1 kernel
 +
** BeagleBone White/Black/Green: v4.1.13-ti-r36 kernel
 +
** OMAP5432 uEVM: v4.1.13-ti-r36 kernel
 +
** BeagleBoard-X15: v4.1.13-ti-r36 kernel
 +
*2015-11-13
 +
** BeagleBoard xM: v4.3.0-armv7-x0 kernel
 +
** BeagleBone White/Black/Green: v4.1.12-ti-r29 kernel
 +
** OMAP5432 uEVM: v4.1.12-ti-r29 kernel
 +
** BeagleBoard-X15: v4.1.12-ti-r29 kernel
  
Verify Image with:  
+
Services Active:
  md5sum ubuntu-10.10-r2-minimal-armel.tar.7z
+
  Note: Depending on your internal network these may work out of the box
6987c076236257227d71b8807cb67829  ubuntu-10.10-r2-minimal-armel.tar.7z
+
  Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
 
+
SSH, Port 22: ssh ubuntu@arm.local (Bone: via usb) ubuntu@192.168.7.2
Unpack Image:
+
Getty, Serial Port
*7za from: sudo apt-get install p7zip-full
 
 
 
7za x ubuntu-10.10-r2-minimal-armel.tar.7z
 
tar xf ubuntu-10.10-r2-minimal-armel.tar
 
cd ubuntu-10.10-r2-minimal-armel
 
 
 
Install Image:
 
 
 
Quick Install script for Beagle Bx, Cx, xM Ax, xM B
 
  ./setup_sdcard.sh --mmc /dev/sdX --uboot beagle
 
 
 
*Additional Options
 
** --rootfs <ext4 default>
 
** --swap_file <swap file size in MB's>
 
** --addon <pico>
 
 
 
You should now be able to unmount the SD card from you PC, insert into your BeagleBoard, reboot and have Ubuntu Maverick loaded.
 
 
 
Problems?
 
What you should see on first boot: http://pastebin.com/h2MFRj89
 
 
 
For a full gui install run this on your beagle (make sure network is setup):
 
setup network: "sudo ifconfig -a" and "sudo dhclient usb1 or eth0"
 
sudo aptitude install xfce4 gdm xubuntu-gdm-theme xubuntu-artwork xserver-xorg-video-omap3
 
 
 
Advanced: Build Image:
 
 
 
fixup.sh: http://rcn-ee.homeip.net:81/dl/updates/omap-image-builder/tools/fixup.sh
 
 
 
Built with rootstock trunk (ARM native mode, run directly on beagleboard):
 
sudo ./rootstock --fqdn omap --imagesize 2G --dist maverick --serial ttyS2 \
 
--login ubuntu --password temppwd \
 
--seed aptitude,btrfs-tools,i2c-tools,nano,pastebinit,uboot-envtools,uboot-mkimage,usbutils,wget,wireless-tools,wpasupplicant \
 
--script fixup.sh --components "main universe multiverse" \
 
--kernel-image http://rcn-ee.net/deb/maverick/v2.6.35.8-l7/linux-image-2.6.35.8-l7_1.0maverick_armel.deb
 
 
 
== Lucid 10.04.1 ==
 
 
 
Image Updated Nov 10, for xM B's..
 
  
 
Default user: ubuntu pass: temppwd
 
Default user: ubuntu pass: temppwd
  
 
Get prebuilt image:
 
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2016-01-14/elinux/ubuntu-14.04.3-console-armhf-2016-01-14.tar.xz
  
  wget http://rcn-ee.net/deb/rootfs/lucid/ubuntu-10.04.1-r3-minimal-armel.tar.7z
+
Verify Image with:
  mirrors (updating):
+
  sha256sum ubuntu-14.04.3-console-armhf-2016-01-14.tar.xz
  wget http://ynezz.ibawizard.net/beagleboard/lucid/ubuntu-10.04.1-r3-minimal-armel.tar.7z
+
  3f2fa9b8c95ae5f52d2f285f51de5d1d2195fddf28032b10f079c8356ade1f52 ubuntu-14.04.3-console-armhf-2016-01-14.tar.xz
  
Verify Image with:  
+
Unpack Image:
  md5sum ubuntu-10.04.1-r3-minimal-armel.tar.7z
+
  tar xf ubuntu-14.04.3-console-armhf-2016-01-14.tar.xz
  3a8e563953ba8e72304660033bd890f0  ubuntu-10.04.1-r3-minimal-armel.tar.7z
+
  cd ubuntu-14.04.3-console-armhf-2016-01-14
  
Unpack Image:
+
If you don't know the location of your SD card:
*7za from: sudo apt-get install p7zip-full
+
sudo ./setup_sdcard.sh --probe-mmc
  
7za x ubuntu-10.04.1-r3-minimal-armel.tar.7z
+
You should see something like:
tar xf ubuntu-10.04.1-r3-minimal-armel.tar
 
cd ubuntu-10.04.1-r3-minimal-armel
 
  
Install Image:
+
Are you sure? I don't see [/dev/idontknow], here is what I do see...
 +
 +
fdisk -l:
 +
Disk /dev/sda: 500.1 GB, 500107862016 bytes '''<- x86 Root Drive'''
 +
Disk /dev/sdd: 3957 MB, 3957325824 bytes '''<- MMC/SD card'''
 +
 +
lsblk:
 +
NAME  MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
 +
sda      8:0    0 465.8G  0 disk
 +
├─sda1  8:1    0 446.9G  0 part /  '''<- x86 Root Partition'''
 +
├─sda2  8:2    0    1K  0 part
 +
└─sda5  8:5    0  18.9G  0 part [SWAP]
 +
sdd      8:48  1  3.7G  0 disk
 +
├─sdd1  8:49  1    64M  0 part
 +
└─sdd2  8:50  1  3.6G  0 part
  
Quick Install script for Beagle Bx, C2/C3/C4, xM Ax, xM B
+
* In this example, we can see via mount, '''/dev/sda1''' is the x86 rootfs, therefore '''/dev/sdd''' is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...
./setup_sdcard.sh --mmc /dev/sdX --uboot beagle --swap_file 50  (YOU need atleast 50Mb for oem-config to NOT Opps)
 
  
For Serial Port Users add: (to use default user/pass ubuntu/temppwd)
+
Install Image:
--use-default-user
 
  
*Additional Options
+
Quick install script for [board]
** --rootfs <ext4 default>
+
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
** --swap_file <swap file size in MB's>
 
** --addon <pico>
 
  
Problems?:
+
board options:
What you should see on First Boot (oem-config on dvi): http://pastebin.com/5HvWgRDj
+
*BeagleBoard Ax/Bx/Cx/Dx          - omap3-beagle
 +
*BeagleBoard xM                  - omap3-beagle-xm
 +
*BeagleBone White/Black/Green    - beaglebone
 +
*OMAP5432 uEVM                    - omap5-uevm
 +
*BeagleBoard-X15                  - am57xx-beagle-x15
  
For a full gui install:  
+
So for the BeagleBoard xM:
  sudo aptitude install xfce4 gdm xubuntu-gdm-theme xubuntu-artwork xserver-xorg-video-omap3
+
  sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
  
 
Advanced: Build Image:
 
Advanced: Build Image:
  
fixup.sh: http://rcn-ee.homeip.net:81/dl/updates/omap-image-builder/tools/fixup.sh
+
git clone https://github.com/RobertCNelson/omap-image-builder.git
 +
cd omap-image-builder
 +
git checkout v2016.01 -b tmp
  
Built with rootstock trunk (ARM native mode, run directly on beagleboard):
+
Stable:
sudo ./rootstock --fqdn omap --imagesize 2G --dist lucid --serial ttyS2 \
 
--login ubuntu --password temppwd \
 
--seed aptitude,btrfs-tools,i2c-tools,nano,pastebinit,uboot-envtools,uboot-mkimage,usbutils,wget,wireless-tools,wpasupplicant \
 
--script fixup.sh --components "main universe multiverse" \
 
--kernel-image http://rcn-ee.net/deb/lucid/v2.6.35.8-l7/linux-image-2.6.35.8-l7_1.0lucid_armel.deb
 
  
= NetInstall Method =
+
./RootStock-NG.sh -c rcn-ee_console_ubuntu_trusty_armhf
  
NOTE: Lucid's NetInstall will not work with the new XM model..
+
Testing:
  
The NetInstall Method, allows you to install Ubuntu directly onto your Beagle by pre-populating a boot image that will perform the complete install.
+
./RootStock-NG.sh -c rcn-ee_console_ubuntu_xenial_armhf
  
Note: The boot arg's are stored in boot.scr which will be copied to the first partition.
+
=== Ubuntu Testing (xenial) ===
  
Recommended:
+
Image Updated:
* 2GB+ SD card
+
*2016-01-14
* USB Ethernet/Wifi
+
** BeagleBoard xM: v4.4.0-armv7-x3 kernel
 +
** BeagleBone White/Black/Green: v4.1.15-ti-rt-r40 kernel
 +
** OMAP5432 uEVM: v4.1.15-ti-rt-r40 kernel
 +
** BeagleBoard-X15: v4.1.15-ti-rt-r40 kernel
 +
*2015-12-11
 +
** BeagleBoard xM: v4.3.2-armv7-x1 kernel
 +
** BeagleBone White/Black/Green: v4.1.13-ti-r36 kernel
 +
** OMAP5432 uEVM: v4.1.13-ti-r36 kernel
 +
** BeagleBoard-X15: v4.1.13-ti-r36 kernel
 +
*2015-11-13
 +
** BeagleBoard xM: v4.3.0-armv7-x0 kernel
 +
** BeagleBone White/Black/Green: v4.1.12-ti-r29 kernel
 +
** OMAP5432 uEVM: v4.1.12-ti-r29 kernel
 +
** BeagleBoard-X15: v4.1.12-ti-r29 kernel
  
Discover SD/MMC Partition
+
Get prebuilt image:
  sudo fdisk -l
+
  wget https://rcn-ee.com/rootfs/2016-01-14/elinux/ubuntu-xenial-console-armhf-2016-01-14.tar.xz
  
Download NetInstall Omap script
+
Verify Image with:
  git clone git://github.com/RobertCNelson/netinstall-omap.git
+
  sha256sum ubuntu-xenial-console-armhf-2016-01-14.tar.xz
  cd netinstall-omap
+
  a8b5995584caf58a37e1b454724b4b4e300a21bfd72e2156f30052a104d2b035 ubuntu-xenial-console-armhf-2016-01-14.tar.xz
  ./mk_mmc.sh --mmc /dev/sdX --distro lucid --firmware
 
  
*Options:
+
Unpack image:
**--distro : lucid
+
tar xf ubuntu-xenial-console-armhf-2016-01-14.tar.xz
**--firmware : install firmware for WiFi devices
+
cd ubuntu-xenial-console-armhf-2016-01-14
**--serial-mode : force NetInstall to use Serial Port
 
  
Note: The default boot options work for most people, but if you'd like to tweak boot settings, edit these before running the script.
+
Then follow the directions shown above with the other images...
 
NetInstall boot Settings:
 
gedit ./netinstall-omap/scripts/dvi.cmd
 
gedit ./netinstall-omap/scripts/serial.cmd
 
 
Normal Boot Settings:
 
gedit ./netinstall-omap/scripts/dvi-normal-lucid.cmd
 
gedit ./netinstall-omap/scripts/serial-normal-lucid.cmd
 
  
Place SD card into Beagle and Boot
+
== Flasher ==
  
Troubshooting: If boot fails..
+
=== eMMC: BeagleBone Black/Green ===
*Hold the user button down to force booting from MMC
 
*Upgrade X-loader and U-boot [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
 
*Clear U-boot's Environment Variables in nand:
 
nand erase 260000 20000
 
  
NetInstall assumptions:
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Ubuntu will now boot directly from eMMC.
  Continue with out Kernel Modules <yes>
 
  Partition <Guided - use the largest continuous free space>
 
  
= Build an Ubuntu root file system with RootStock=
+
Script for reference: (this is the script that writes to the eMMC)
 +
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
  
== Install RootStock ==
+
This script will only take about 5-6 Minutes after power on.
  
This is based off Ubuntu's RootStock Project; [https://launchpad.net/project-rootstock RootStock] script.
+
Notes:
 +
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
  
Maverick (10.10)
+
User: ubuntu
sudo apt-get install rootstock
+
pass: temppwd
  
Lucid (10.04) (use rootstock trunk)
+
Image Updated:
sudo apt-get install rootstock (to install rootstock's dependices)
+
*2016-01-14
bzr branch lp:project-rootstock
+
** BeagleBone Black/Green: v4.1.15-ti-rt-r40 kernel
cd project-rootstock
+
*2015-12-11
 +
** BeagleBone Black/Green: v4.1.13-ti-r36 kernel
 +
*2015-11-13
 +
** BeagleBone Black/Green: v4.1.12-ti-r29 kernel
  
== RootStock ==
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2016-01-14/flasher/BBB-eMMC-flasher-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz
 +
wget https://rcn-ee.com/rootfs/2016-01-14/flasher/BBB-eMMC-flasher-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.bmap
  
=== RootStock: Useful seed Packages ===
+
Verify Image with:
 +
sha256sum BBB-eMMC-flasher-ubuntu-14.04.3-console-armhf-2016-01-14-2gb*
 +
cf6cae65a5cceb0bf777a6c9a9826c24991d1a9d9b8dfb3c9d86c980d5628982  BBB-eMMC-flasher-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.bmap
 +
2b02acd35c419b6ae9f91f5b5f99bff8ef918ac9200bea74f10e397c90d2e918  BBB-eMMC-flasher-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz
  
Useful Packages:
+
Linux: (bmaptool 3.2)
  linux-firmware,wireless-tools :wifi adapters..
+
  sudo bmaptool copy --bmap BBB-eMMC-flasher-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.bmap \
  ntpdate :sync real time clock from network
+
  BBB-eMMC-flasher-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz /dev/sdX
  
GUI's (broken bug: FIXME)
+
Linux: (dd)
  xfce4: xfce4,gdm,xubuntu-gdm-theme,xubuntu-artwork
+
  unxz BBB-eMMC-flasher-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz
 +
  sudo dd if=./BBB-eMMC-flasher-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img of=/dev/sdX
  
=== RootStock: Running ===
+
=== eMMC: BeagleBoard-X15 ===
  
Rootstock Command line:
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Ubuntu will now boot directly from eMMC.
sudo ./rootstock --fqdn <hostname> --login <rootuser> --password <rootuserpasswd> --imagesize <qemu image size> \
 
  --seed <packages> --dist <lucid/maverick> --serial <ttySx> --kernel-image <http>
 
  
Basic Maverick (10.10) Beagleboard minimal image:
+
Script for reference: (this is the script that writes to the eMMC)
  sudo ./rootstock --fqdn omap --login ubuntu --password temppwd --imagesize 2G \
+
  https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
--seed wget,nano,linux-firmware,wireless-tools,usbutils --dist maverick --serial ttyS2 \
 
--components "main universe multiverse" \
 
--kernel-image http://rcn-ee.net/deb/maverick/v2.6.35.9-l8/linux-image-2.6.35.9-l8_1.0maverick_armel.deb
 
  
Upon Completion, you should have:
+
This script will only take about 5-6 Minutes after power on.
armel-rootfs-<date>.tgz  -> Root file System, dump to ext2/3 partition of SD card
 
vmlinuz-2.6.<version>    -> Boot Image, use mkimage to create uImage and dump to the first fat16 partition of SD card
 
initrd.img-2.6.<version> -> Boot initramfs, use mkimage to create uInitrd and dump to the first fat16 partition of SD card
 
  
= Manually Setup SD Card =
+
Notes:
 +
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
  
For this section, you can use the files from above:
+
User: ubuntu
Demo Images: http://elinux.org/BeagleBoardUbuntu#Demo_Image
+
pass: temppwd
Rootstock: http://elinux.org/BeagleBoardUbuntu#Build_an_Ubuntu_root_file_system_with_RootStock
 
  
== Partition SD Card ==
+
Image Updated:
You will need a 1GB SD card or greater.
+
*2016-01-14
Standard Console System : ~286MB
+
** BeagleBoard-X15: v4.1.15-ti-rt-r40 kernel
+ Desktop environment (lxde,gdm) : ~479MB
+
*2015-12-11
 +
** BeagleBoard-X15: v4.1.13-ti-r36 kernel
 +
*2015-11-13
 +
** BeagleBoard-X15: v4.1.12-ti-r29 kernel
  
Starting with an empty SD card and using gparted, create:
+
Get prebuilt image:
  50 MiB Primary Partition, fat16/fat32
+
  wget https://rcn-ee.com/rootfs/2016-01-14/flasher/bbx15-eMMC-flasher-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz
  Rest as ext2/ext3/ext4/btrfs
+
  wget https://rcn-ee.com/rootfs/2016-01-14/flasher/bbx15-eMMC-flasher-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.bmap
  
Note: The boot partition can be hard to make bootable at times, here's a quick command line:
+
Verify Image with:
 +
sha256sum bbx15-eMMC-flasher-ubuntu-14.04.3-console-armhf-2016-01-14-2gb*
 +
9fb1dad893f59dd520b77ebb2561e774154ba150486b0c5073ff14ff238d3a04  bbx15-eMMC-flasher-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.bmap
 +
2164ad445759eb5933aafb286213e393f031dc29d67fb0c1b3d1abcdcf65c406  bbx15-eMMC-flasher-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz
  
First blank the MMC card's partition table with parted: (/dev/sdX as an example)  
+
Linux: (bmaptool 3.2)
  sudo parted -s /dev/sdX mklabel msdos
+
  sudo bmaptool copy --bmap bbx15-eMMC-flasher-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.bmap \
 +
bbx15-eMMC-flasher-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz /dev/sdX
  
Then create the new boot partition:
+
Linux: (dd)
  sudo fdisk -H 255 -S 63 /dev/sdX << MMC_END
+
unxz bbx15-eMMC-flasher-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz
n
+
  sudo dd if=./bbx15-eMMC-flasher-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img of=/dev/sdX
p
 
1
 
1
 
+64M
 
a
 
1
 
t
 
e
 
p
 
w
 
MMC_END
 
  
And format it as vfat:
+
== raw microSD img ==
sudo mkfs.vfat -F 16 $/dev/sdX1
 
  
The rootfs partition, doesn't need any special options, so just use fdisk, gparted, etc to create and format your rootfs partition..
+
=== BeagleBone White/Black/Green ===
  
Gparted Example: http://nishanthmenon.blogspot.com/2008/08/how-to-boot-beagle.html
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
  
For Reference:
+
User: ubuntu
Disk /dev/sdd: 2038 MB, 2038431744 bytes
+
pass: temppwd
255 heads, 63 sectors/track, 247 cylinders
 
Units = cylinders of 16065 * 512 = 8225280 bytes
 
Disk identifier: 0x0008e471
 
 
    Device Boot      Start        End      Blocks  Id  System
 
/dev/sdd1              1          6      48163+  6  FAT16
 
/dev/sdd2              7        247    1935832+  83  Linux
 
  
== Boot Partition ==
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
Requirements:
+
Image Updated:
 +
*2016-01-14
 +
** BeagleBone White/Black/Green: v4.1.15-ti-rt-r40 kernel
 +
*2015-12-11
 +
** BeagleBone White/Black/Green: v4.1.13-ti-r36 kernel
 +
*2015-11-13
 +
** BeagleBone White/Black/Green: v4.1.12-ti-r29 kernel
  
  sudo apt-get install uboot-mkimage
+
Get prebuilt image:
  Mount the fatfs partition of your SD card.
+
  wget https://rcn-ee.com/rootfs/2016-01-14/microsd/bone-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz
 +
  wget https://rcn-ee.com/rootfs/2016-01-14/microsd/bone-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.bmap
  
Mount such as: (/dev/sdX1 is the fat Boot Partition)
+
Verify Image with:
  mkdir -p ./tmp
+
  sha256sum bone-ubuntu-14.04.3-console-armhf-2016-01-14-2gb*
  sudo mount /dev/sdX1 ./tmp
+
4ffbb35026f3f25925d65895da4d17d69aa5133e4d2f7afcf093672073a5fa82  bone-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.bmap
 +
  991888ec1ce4fb66e6d6b3d3ab4715983f0082f67508d2bd74581dfb843e3747  bone-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz
  
=== MLO and U-Boot ===
+
Linux: (bmaptool 3.2)
 +
sudo bmaptool copy --bmap bone-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.bmap \
 +
bone-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz /dev/sdX
  
Download and copy MLO and U-Boot from here:
+
Linux: (dd)
  http://www.angstrom-distribution.org/demo/beagleboard/
+
unxz bone-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz
 +
  sudo dd if=./bone-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img of=/dev/sdX
  
First copy "MLO-beagleboard-1.44+rX+gitX-rX" as MLO to the Boot Partition
+
=== OMAP5432 uEVM ===
Then copy "u-boot-beagleboard-20XX.XX+r62+gitX-rX.bin" as u-boot.bin to the Boot Partition
 
  
=== U-Boot uImage and uInitrd ===
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
  
U-Boot needs a compatible kernel image to boot.  To do this, we are using mkimage from (uboot-mkimage) to create an image from the vmlinuz kernel file.
+
User: ubuntu
 +
pass: temppwd
  
  mkimage -A arm -O linux -T kernel -C none -a 0x80008000 -e 0x80008000 -n "Linux" -d ./vmlinuz-* ./uImage
+
Auto partition resize:
  Copy "uImage" to the Boot Partition
+
cd /opt/scripts/tools
 +
git pull
 +
  ./grow_partition.sh
 +
  sudo reboot
  
This step is Optional, but it helps with the lucid and maverick experience.
+
Image Updated:
 +
*2016-01-14
 +
** OMAP5432 uEVM: v4.1.15-ti-rt-r40 kernel
 +
*2015-12-11
 +
** OMAP5432 uEVM: v4.1.13-ti-r36 kernel
 +
*2015-11-13
 +
** OMAP5432 uEVM: v4.1.12-ti-r29 kernel
  
  mkimage -A arm -O linux -T ramdisk -C none -a 0 -e 0 -n initramfs -d ./initrd.img-* ./uInitrd
+
Get prebuilt image:
Copy "uInitrd" to the Boot Partition
+
  wget https://rcn-ee.com/rootfs/2016-01-14/microsd/omap5-uevm-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz
 +
wget https://rcn-ee.com/rootfs/2016-01-14/microsd/omap5-uevm-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.bmap
  
=== U-Boot Boot Scripts ===
+
Verify Image with:
The version of U-Boot installed or recommended to install uses boot scripts by defaultThis allows users to easily switch between multiple SD cards with different OS's with different parameters installed. Ubuntu/Debian requires a slight modification to the bootargs line vs. Angstrom, 'ro' vs 'rw'.
+
sha256sum omap5-uevm-ubuntu-14.04.3-console-armhf-2016-01-14-2gb*
 +
89759c74dd879900a7757c1abfdcf101f3ee40527c835f86d40159025ddd4d96  omap5-uevm-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.bmap
 +
  a7130cc1a143aec3f35b6869ef722fd987b8e0f3e7e51590c3a3d80e82de93f8  omap5-uevm-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz
  
fixrtc: (only uInitrd) Resets RTC based on last mount
+
Linux: (bmaptool 3.2)
  buddy=${buddy}: (both) Kernel Zippy1/2 Support
+
  sudo bmaptool copy --bmap omap5-uevm-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.bmap \
  mpurate=${mpurate}: (recommended core clock)
+
  omap5-uevm-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz /dev/sdX
  
==== Beagle Bx/Cx ====
+
Linux: (dd)
 +
unxz omap5-uevm-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz
 +
sudo dd if=./omap5-uevm-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img of=/dev/sdX
  
create a new file: boot.cmd
+
=== BeagleBoard-X15 ===
setenv dvimode 1280x720MR-16@60
 
setenv vram 12MB
 
setenv bootcmd 'mmc init; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000'
 
setenv bootargs console=ttyS2,115200n8 console=tty0 root=/dev/mmcblk0p2 rootwait ro vram=${vram} omapfb.mode=dvi:${dvimode} fixrtc buddy=${buddy} mpurate=${mpurate}
 
boot
 
  
When using optional uInitrd, create: boot.cmd
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager
setenv dvimode 1280x720MR-16@60
 
setenv vram 12MB
 
setenv bootcmd 'mmc init; fatload mmc 0:1 0x80300000 uImage; fatload mmc 0:1 0x81600000 uInitrd; bootm 0x80300000 0x81600000'
 
setenv bootargs console=ttyS2,115200n8 console=tty0 root=/dev/mmcblk0p2 rootwait ro vram=${vram} omapfb.mode=dvi:${dvimode} fixrtc buddy=${buddy} mpurate=${mpurate}
 
boot
 
  
==== Beagle xM ====
+
User: ubuntu
kernel limitation, randomly hardlocks at 1Ghz, can only run at 800Mhz till the dvs patches hit upstream..
+
pass: temppwd
  
create a new file: boot.cmd
+
Auto partition resize:
  setenv mpurate 800
+
  cd /opt/scripts/tools
  setenv dvimode 1280x720MR-16@60
+
  git pull
  setenv vram 12MB
+
  ./grow_partition.sh
setenv bootcmd 'mmc init; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000'
+
  sudo reboot
setenv bootargs console=ttyS2,115200n8 console=tty0 root=/dev/mmcblk0p2 rootwait ro vram=${vram} omapfb.mode=dvi:${dvimode} fixrtc buddy=${buddy} mpurate=${mpurate}
 
  boot
 
  
When using optional uInitrd, create: boot.cmd
+
Image Updated:
setenv mpurate 800
+
*2016-01-14
setenv dvimode 1280x720MR-16@60
+
** BeagleBoard-X15: v4.1.15-ti-rt-r40 kernel
setenv vram 12MB
+
*2015-12-11
setenv bootcmd 'mmc init; fatload mmc 0:1 0x80300000 uImage; fatload mmc 0:1 0x81600000 uInitrd; bootm 0x80300000 0x81600000'
+
** BeagleBoard-X15: v4.1.13-ti-r36 kernel
setenv bootargs console=ttyS2,115200n8 console=tty0 root=/dev/mmcblk0p2 rootwait ro vram=${vram} omapfb.mode=dvi:${dvimode} fixrtc buddy=${buddy} mpurate=${mpurate}
+
*2015-11-13
boot
+
** BeagleBoard-X15: v4.1.12-ti-r29 kernel
  
Use mkimage create to actual *.scr file for U-Boot:
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2016-01-14/microsd/bbx15-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz
 +
wget https://rcn-ee.com/rootfs/2016-01-14/microsd/bbx15-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.bmap
  
  mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "Ubuntu" -d ./boot.cmd ./boot.scr
+
Verify Image with:
  Copy "boot.scr" to the Boot Partition
+
  sha256sum bbx15-ubuntu-14.04.3-console-armhf-2016-01-14-2gb*
For "igepv2" users, rename this to "boot.ini"
+
871a6e0022f14db643c37e81ad0684bb6111e52d90a6184b29d597c4a1b0f7fb  bbx15-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.bmap
 +
  938cb6d2c5876bccf7dfa897a22d4a56a21f4ea05bff78cdde589060700ac9a2  bbx15-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz
  
Umount the Boot Partition:
+
Linux: (bmaptool 3.2)
 +
sudo bmaptool copy --bmap bbx15-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.bmap \
 +
bbx15-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz /dev/sdX
  
  sudo umount ./tmp
+
Linux: (dd)
 +
unxz bbx15-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz
 +
  sudo dd if=./bbx15-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img of=/dev/sdX
  
== RootFS Partition ==
+
= Method 2: Use the NetInstall method=
Root File System
 
  
Mount your SD card's larger root file system partition (assuming /dev/sdX2) and 'untar' the rootfs into it.
+
You will need a 1GB/2GB/4GB/8GB SD card or greater.
 +
Standard system : ~700&nbsp;MB
  
mkdir -p ./tmp
+
Report Bugs/Issues to: https://github.com/RobertCNelson/netinstall/issues
sudo mount /dev/sdX2 ./tmp
+
(anywhere else will be ignored..)
sudo tar xfp armel-rootfs-*.tgz -C ./tmp
 
sudo umount ./tmp
 
  
== Ubuntu Bugs & Tweaks ==
+
Download the netinstall script:
 +
git clone https://github.com/RobertCNelson/netinstall.git
 +
cd netinstall
  
===Enable Network Access===
+
Currently supported Ubuntu distributions:
 +
--distro oneiric (11.10)
 +
--distro precise-armhf (12.04)
 +
--distro quantal (12.10)
 +
--distro raring (13.04)
 +
--distro saucy (13.10)
  
Modify /etc/network/interfaces
+
Device: <board> selection:
  auto eth0
+
*BeagleBoard Ax/Bx/Cx  - omap3-beagle
  iface eth0 inet dhcp
+
*BeagleBoard xMA/B/C  - omap3-beagle-xm
 +
*BeagleBone Ax        - am335x-bone-serial
 +
*BeagleBone (DVI cape) - am335x-bone-video
 +
*BeagleBone Black      - am335x-boneblack
 +
*PandaBoard Ax    - omap4-panda
 +
  *PandaBoard A4+    - omap4-panda-a4
 +
  *PandaBoard ES    - omap4-panda-es
  
Manual: From the Command line
+
Installation script for new <board> selection: (slowly migrating all devices to this method)
  sudo ifconfig -a
+
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb <board> --distro <distro>
sudo dhclient ethX (or wlanX/etc..)
 
  
Additional Network Setup Information can be found [[BeagleBoardUbuntuNetwork|HERE]]
+
So for the xM: with quantal:
 +
sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro quantal
  
= Advanced =
+
*Other Options:
 +
**--firmware : installs firmware
 +
**--serial-mode : debian-installer uses Serial Port
  
==Install Latest Kernel Image==
+
Place SD card into BeagleBoard and boot:
  
===Script File===
+
Configure the network:
Note: this subsection is basically obsolete every time it's modified...
+
usb0: USB net <- (usually the OTG port)
 +
eth0: USB net <- (usually the smsc95xx adapter on the BeagleBoard and PandaBoard)
 +
wlan0: Wifi <- Your USDB-Wi-Fi device..  
  
Latest Stable is : https://code.launchpad.net/~beagleboard-kernel/+junk/2.6-stable
+
See my notes for my testing procedure: https://github.com/RobertCNelson/netinstall/blob/master/test.Ubuntu
 
 
But for example: http://rcn-ee.net/deb/lucid/v2.6.34.1-l2/
 
 
wget http://rcn-ee.net/deb/lucid/v2.6.34.1-l2/install-me.sh
 
/bin/bash install-me.sh
 
 
 
Reboot with your new uImage
 
 
 
== Upgrade X-loader and U-boot ==
 
 
 
Compatible with Bx,C2/3/4
 
 
 
Requires MMC card..
 
 
 
git clone git://github.com/RobertCNelson/flash-omap.git
 
cd flash-omap
 
./mk_mmc.sh --mmc /dev/sdX (i.e. use /dev/sdc - the entire device, not a partition)
 
 
 
1: Place MMC card in Beagle
 
2: Push/Hold User Button Down
 
3: Apply Power
 
4: After U-boot loads, Let Off User Button
 
5: Wait for Flashing to end
 
6: Power down, remove/edit boot.scr from MMC card
 
 
 
Example 4G card:
 
 
 
sudo fdisk -l
 
 
 
Disk '''/dev/sde''': 3957 MB, 3957325824 bytes
 
255 heads, 63 sectors/track, 481 cylinders
 
Units = cylinders of 16065 * 512 = 8225280 bytes
 
Sector size (logical/physical): 512 bytes / 512 bytes
 
I/O size (minimum/optimal): 512 bytes / 512 bytes
 
Disk identifier: 0x00080e99
 
 
    Device Boot      Start        End      Blocks  Id  System
 
'''/dev/sde'''1  *          1          9      72261    e  W95 FAT16 (LBA)
 
 
 
./mk_mmc.sh --mmc /dev/sde
 
 
 
Worst case, depending on what's actually in NAND, you might still have to stop and do this:
 
  
 +
Troubleshooting: If booting fails..
 +
*Hold the user button down to force booting from MMC
 +
*Upgrade X-loader and U-boot [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
 +
*Clear U-boot's Environment Variables in NAND:
 
  nand erase 260000 20000
 
  nand erase 260000 20000
reset
 
  
===Manual Run===
+
NetInstall assumptions:
mmc init
+
  Assume asll <default>'s... Thanks you preseed.conf!!!
fatload mmc 0:1 0x80200000 MLO
 
  nand unlock
 
nand ecc hw
 
nandecc hw
 
nand erase 0 80000
 
nand write 0x80200000 0 20000
 
nand write 0x80200000 20000 20000
 
nand write 0x80200000 40000 20000
 
nand write 0x80200000 60000 20000
 
 
fatload mmc 0:1 0x80300000 u-boot.bin
 
nand unlock
 
nand ecc sw
 
nandecc sw
 
nand erase 80000 160000
 
nand write 0x80300000 80000 160000
 
nand erase 260000 20000
 
reset
 
  
== SGX Video Acceleration ==
+
= Method 3: Manual Install (no automatic scripts)=
  
Requirements: 2.6-stable from launchpad or 2.6.35.3-x1+ deb's from rcn-ee.net. (the Demo Images hosted on rcn-ee.net meet this requirement)
+
Note, this section used to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
  https://code.launchpad.net/~beagleboard-kernel/+junk/2.6-stable
 
  
Note: ''An older version of these instructions was adapted for the IGEPv2 platform - if you are following this tutorial and have an IGEPv2, consider using http://wiki.jmaustin.org/wiki/IgepSGXUbuntu instead''
+
== Beagle/Beagle xM ==
 +
http://eewiki.net/display/linuxonarm/BeagleBoard
  
=== SDK unPackage Script ===
+
== BeagleBone ==
 +
http://eewiki.net/display/linuxonarm/BeagleBone
  
Download the latest version of the "create_sgx_package.sh" script
+
== BeagleBone Black ==
  wget http://rcn-ee.homeip.net:81/dl/updates/2.6-stable/create_sgx_package.sh
+
  http://eewiki.net/display/linuxonarm/BeagleBone+Black
  
Make script executable
+
== Panda/Panda ES ==
  chmod a+x ./create_sgx_package.sh
+
  http://eewiki.net/display/linuxonarm/PandaBoard
  
Run script
+
= Advanced =
./create_sgx_package.sh
 
  
After Successfully running:
+
==Install Latest Kernel Image==
 
 
:~/temp$ ls
 
create_sgx_package.sh
 
GFX_4_00_00_01_libs.tar.gz                      : -> Copy to Beagle (System Libs)
 
GFX_Linux_SDK.tar.gz                            : -> Copy to Beagle (DEMO's)
 
Graphics_SDK_setuplinux_4_00_00_01.bin
 
SDK
 
SDK_BIN
 
 
 
=== Beagle: GFX_*_libs.tar.gz ===
 
  
  tar xf GFX_4_00_00_01_libs.tar.gz  (extracts install-SGX.sh and run-SGX.sh)
+
General apt syntax for searching and installing a specific kernel:
  ./install-SGX.sh (copies necessary SGX libs and startup script)
+
  sudo apt-get update
  ./run-SGX.sh (force run the new init script, or you can just reboot...)
+
  sudo apt-cache search linux-image | grep <branch>
 
+
  sudo apt-get install linux-image-<specific version>
On Successful install:
 
Stopping PVR
 
Starting PVR
 
Starting SGX fixup for ES2.x (or ES3.x) (or ES5.x xM)
 
 
 
Reboot for good measure (Maverick's Alpha-1 needs this....)
 
 
  sudo reboot
 
  sudo reboot
  
=== Beagle: GFX_Linux_SDK.tar.gz ===
+
Latest kernel script
 +
cd /opt/scripts/tools/
 +
git pull
 +
sudo ./update_kernel.sh <OPTIONS>
  
tar xf GFX_Linux_SDK.tar.gz
+
== 3.8.x ==
cd GFX_Linux_SDK
+
This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy
  tar xf OGLES.tar.gz
+
  beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8
  
=== Test SGX with a DEMO ===
+
3.8.x BeagleBone/BeagleBone Black FULL Cape Support
 +
--bone-channel --stable
  
  cd OGLES/SDKPackage/Binaries/CommonX11/Demos/ChameleonMan
+
  3.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai
  ./OGLESChameleonMan
+
  --bone-xenomai-channel --stable
  
=== Trouble Shooting ===
+
== 4.1.x-ti ==
 +
This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled.
 +
beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.1
 +
Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.1.y
  
  sudo rm /etc/powervr-esrev
+
  4.1.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
  sudo depmod -a omaplfb
+
  --ti-channel --stable
sudo /etc/init.d/pvr restart
 
  
== DSP ==
+
4.1.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
 +
--ti-rt-channel --stable
  
This is still a major work in progress...
+
== Mainline (lts) ==
  
Here is one approach: [http://www.elinux.org/BeagleBoard_Ubuntu_%26_DSP_From_Sources BeagleBoard Ubuntu & DSP From Sources]
+
4.1.x BeagleBone/BeagleBone Black + SGX
 +
--bone-kernel --lts
  
== Xorg omapfb Drivers ==
+
4.1.x BeagleBone/BeagleBone Black + RT + SGX
 +
--bone-rt-kernel --lts
  
By default Ubuntu will try to use the FBDEV video driver, however for the beagleboard we can take advantage of a more software optimized driver (still not using the sgx video hardware) using the NEON extensions of the Cortex-A8 core.
+
== Mainline ==
 +
4.3.x BeagleBone/BeagleBone Black
 +
--bone-kernel --testing
  
cat /var/log/Xorg.0.log | grep FBDEV
+
== Debian 8: jessie ==
(II) FBDEV: driver for framebuffer: fbdev
+
  sudo apt-get install linux-image-armmp
(II) FBDEV(0): using default device
 
(II) FBDEV(0): Creating default Display subsection in Screen section
 
(==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
 
  (==) FBDEV(0): RGB weight 565
 
  
Login into Ubuntu and open a new terminal, xorg has to be running..
+
Reboot with your new Kernel Image.
  
xvinfo -display :0.0
+
== Xorg Drivers ==
X-Video Extension version 2.2
 
screen #0
 
  no adaptors present
 
  
=== Drivers ===
+
Script:
 +
cd /opt/scripts/tools/
 +
git pull
  
Note: These are built with neon optimizations: http://git.debian.org/?p=collab-maint/xf86-video-omapfb.git;a=blob;f=debian/rules;h=c2f0d5391c96c5abb60b1e691ad86bb27e0c17d8;hb=HEAD (line 48/49)
+
BeagleBoard/PandaBoard:
 +
cd /opt/scripts/tools/graphics/
 +
  ./ti-omapdrm.sh
  
Lucid:
+
BeagleBone/BeagleBone Black:
  sudo apt-get install xserver-xorg-video-omap3
+
  cd /opt/scripts/tools/graphics/
 +
./ti-tilcdc.sh
  
To verify it was correctly installed, reboot and:
+
== SGX Drivers ==
  
cat /var/log/Xorg.0.log | grep omapfb
+
=== SGX BeagleBone/BeagleBone Black ===
(II) LoadModule: "omapfb"
 
(II) Loading /usr/lib/xorg/modules/drivers//omapfb_drv.so
 
(II) Module omapfb: vendor="X.Org Foundation"
 
(II) omapfb: Driver for OMAP framebuffer (omapfb) and external LCD controllers:
 
(WW) Error opening /sys/devices/platform/omapfb/ctrl/name: No such file or directory
 
(II) omapfb(0): VideoRAM: 1800KiB (SDRAM)
 
(II) omapfb(0): Creating default Display subsection in Screen section
 
(**) omapfb(0): Depth 16, (--) framebuffer bpp 16
 
(==) omapfb(0): RGB weight 565
 
(==) omapfb(0): Default visual is TrueColor
 
(--) omapfb(0): Virtual size is 1280x720 (pitch 1280)
 
(**) omapfb(0):  Built-in mode "current"
 
(==) omapfb(0): DPI set to (96, 96)
 
(II) omapfb(0): DPMS enabled
 
(II) omapfb(0): Video plane capabilities:
 
(II) omapfb(0): Video plane supports the following image formats:
 
(II) omapfb(0): XVideo extension initialized
 
  
Login into Ubuntu and open a new terminal, xorg has to be running..
+
Note, these are FBDEV only, no xorg/x11/etc...
  
xvinfo -display :0.0
+
Install the "4.1.x" lts/bone kernel:
X-Video Extension version 2.2
+
http://elinux.org/BeagleBoardUbuntu#Mainline_.28lts.29
screen #0
 
  Adaptor #0: "OMAP XV adaptor"
 
    number of ports: 1
 
    port base: 56
 
    operations supported: PutImage
 
    supported visuals:
 
      depth 16, visualID 0x21
 
    number of attributes: 1
 
    etc..
 
  
== Changing DVI output resolution ==
+
Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
 +
git clone https://github.com/RobertCNelson/bb-kernel.git
 +
cd bb-kernel/
 +
git checkout origin/am33x-v4.1 -b tmp-sgx
 +
./sgx_create_package.sh
  
Ubuntu 10.10 above defaults to a resolution of 1284x768@16. This is set in the boot.cmd file in the boot partition of the SD card. To change the resolution the DVI output, edit boot.cmd accordingly then recreate the boot.scr file by:
+
Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install
 
+
  sudo tar xfv GFX_5.01.01.02.tar.gz -C /
  mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "Ubuntu 10.10" -d ./boot.cmd ./boot.scr
+
cd /opt/gfxinstall/
 
+
sudo ./sgx-install.sh
Then reboot the BeagleBoard
+
sudo reboot
  
== S-Video ==
+
Verify omaplfb & pvrsrvkm loaded
S-video is tested to be working on 2.6.35-rc5-dl9. S-video output can be enabled using bootargs at uboot as mentioned below.
+
debian@arm:~$ lsmod | grep omaplfb
 +
omaplfb                12065  0
 +
pvrsrvkm              178782  1 omaplfb
  
=== NTSC ===
+
== Xorg Drivers ==
  
    omapfb.mode='''tv:ntsc'''
+
Script:
    omapdss.def_disp='''tv'''
+
cd /opt/scripts/tools/
 +
git pull
  
Bootargs that has been validated.
+
BeagleBoard/PandaBoard:
 +
cd /opt/scripts/tools/graphics/
 +
./ti-omapdrm.sh
  
    setenv bootargs 'console=tty0 console=ttyS2,115200n8 root=/dev/mmcblk0p2 rootwait ro vram=12M omapfb.mode=tv:ntsc omapdss.def_disp=tv
+
BeagleBone/BeagleBone Black:
    fixrtc buddy=unknown'
+
cd /opt/scripts/tools/graphics/
 +
./ti-tilcdc.sh
  
Note that the NTSC resolution is 640x480. However the edge bands around the TV screen differ from TV to TV. Output of '''fbset''' shown below, which does not seem right.
+
= Swapfile =
  
    mode "720x482-30"
+
== Using a File for Swap Instead of a Partition ==
        # D: 13.500 MHz, H: 15.734 kHz, V: 29.970 Hz
 
        geometry 720 482 720 482 32
 
        timings 74074 16 58 6 31 64 6
 
        rgba 8/16,8/8,8/0,0/0
 
    endmode
 
  
=== PAL ===
+
On the Beagleboard you should expect to require a swap file given the limitation of how little RAM is available (between 256&nbsp;MB and 512&nbsp;MB). Some system programs like apt-get will only run properly when some swap space is present (due to 256&nbsp;MB not being enough RAM).
  
Bootargs that has been validated for PAL tv.
+
Some images (such as those from Linaro.org) do not come with a swap partition or any swap space allocated.
  
    setenv bootargs 'console=tty0 console=ttyS2,115200n8 root=/dev/mmcblk0p2 rootwait ro vram=12M omapfb.mode=tv:pal omapdss.def_disp=tv fixrtc buddy=unknown'
+
Under Linux, swap space can be either a dedicated partition or a swap file. Both can be mounted as swap which the OS can access.
  
Using these settings video output will display on the tv, however 5-10% of the left and right edges of display are off the screen (using Ubuntu 10.10 with xfce).
+
=== Creating a Swapfile ===
  
xrandr shows the display is set to the minimum of 720x574. Please update wiki if you can fix this.
+
The following commands will create a 1 GB file, limit access only to root, format it as swap and then make it available to the OS:
  
== Building Kernel ==
+
sudo mkdir -p /var/cache/swap/ 
 +
sudo dd if=/dev/zero of=/var/cache/swap/swapfile bs=1M count=1024
 +
sudo chmod 0600 /var/cache/swap/swapfile
 +
sudo mkswap /var/cache/swap/swapfile
 +
sudo swapon /var/cache/swap/swapfile
  
https://launchpad.net/~beagleboard-kernel
+
To tell the OS to load this swapfile on each start up, edit the /etc/fstab file to include the following additional line:
  
Register on launchpad.net, install bzr
+
  /var/cache/swap/swapfile    none    swap    sw    0  0
  sudo apt-get install bzr
 
  
Download SRC
+
To verify that the swapfile is accessilble as swap to the OS, run "top" or "htop" at a console.
bzr branch lp:~beagleboard-kernel/+junk/2.6-stable
 
 
 
Build Kernel
 
./build_kernel.sh
 
 
 
Optional Building Deb File
 
./build_deb.sh
 
  
 
= Ubuntu Software =
 
= Ubuntu Software =
  
== Wifi Networking (command line) ==
+
== Wi-Fi Networking (command line) ==
  
 
=== /etc/network/interfaces ===
 
=== /etc/network/interfaces ===
  
It is possible and relatively easy to configure a wifi card from the command line.
+
It is relatively easy to configure a Wi-Fi card from the command line.
  
You will need to edit the /etc/network/interfaces file. There are several guides available via Google.
+
You will need to edit the /etc/network/interfaces file. There are several guides available via Google.
  
This is a particularly useful guide http://ubuntuforums.org/showthread.php?t=202834  
+
This is a particularly useful guide https://ubuntuforums.org/showthread.php?t=202834  
  
 
A sample /etc/network/interfaces file for a WPA2 encrypted access point is:
 
A sample /etc/network/interfaces file for a WPA2 encrypted access point is:
Line 685: Line 626:
 
  wpa-group CCMP
 
  wpa-group CCMP
 
  wpa-key-mgmt WPA-PSK
 
  wpa-key-mgmt WPA-PSK
  wpa-psk < INSERT KEY XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX>
+
  wpa-psk <INSERT KEY XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX>
  
Your wifi card will automatically load these settings on start up and give network access.
+
Your Wi-Fi card will automatically load these settings upon startup and initialize wireless network access.
  
 
== Lightweight window managers ==
 
== Lightweight window managers ==
Line 693: Line 634:
 
If you intend to use Ubuntu on the BeagleBoard you can install JWM or IceWM to improve performance.
 
If you intend to use Ubuntu on the BeagleBoard you can install JWM or IceWM to improve performance.
  
JWM in particular uses little RAM. On a BeagleBoard with 256MB, using JWM will leave about 60MB free to run apps in.
+
JWM in particular uses little RAM. On a BeagleBoard with 256&nbsp;MB, using JWM will leave about 60&nbsp;MB free in which to run applications.
  
 
== Web Apps ==
 
== Web Apps ==
  
 
=== Midori ===
 
=== Midori ===
Given that the BeagleBoard has fewer resources than a desktop a light weight browser is more responsive. Midori is a light weight browser that still supports flash etc
+
Given that the BeagleBoard has fewer resources than a desktop a lightweight browser is more responsive. Midori is a lightweight browser that still supports flash, etc. It is available from the standard repositories:
It is available from the standard repositories.
 
 
http://en.wikipedia.org/wiki/Midori_%28web_browser%29
 
http://en.wikipedia.org/wiki/Midori_%28web_browser%29
  
Line 705: Line 645:
  
 
=== Motion ===
 
=== Motion ===
If you have a video source (webcam, IP cam etc) which appears as /dev/video0 etc then you can use the Linux Surveillance software "motion" to monitor the video stream and record periods of activity.
+
If you have a video source (webcam, IP cam, etc.) which appears as /dev/video0, etc. then you can use the Linux surveillance software "motion" to monitor the video stream and record periods of activity.
  
Motion is also available from the standard repositories.
+
Motion is also available from the standard repositories:
 
http://www.debian-administration.org/article/An_Introduction_to_Video_Surveillance_with_%27Motion%27
 
http://www.debian-administration.org/article/An_Introduction_to_Video_Surveillance_with_%27Motion%27
Using a 960x720 resolution webcam with 15 fps rate under the UVC driver the Rev C BeagleBoard under Xubuntu reports ~60% CPU utilisation.
+
Using a 960x720 resolution webcam with a 15&nbsp;fps rate under the UVC driver the Rev C BeagleBoard under Xubuntu reports ~60% CPU utilisation.
  
To make the BeagleBoard automatically start recording on boot do the following:
+
To make the BeagleBoard automatically start recording on boot, do the following:
  
 
* Auto Login - run "gdmsetup" from a terminal and select a user to automatically login  
 
* Auto Login - run "gdmsetup" from a terminal and select a user to automatically login  
* Sessions - make sure you don't save any previous xwindows sessions so that it doesn't prompt you for which one you want
+
* Sessions - make sure you don't save any previous X Windows sessions so that it doesn't prompt you for which one you want
* motion.conf - amend /etc/motion/motion.conf to the settings you want (ie video output directory, record only video, record in mpeg4, set frame rate etc). Do this with "sudo medit /etc/motion/motion.conf" at a prompt.
+
* motion.conf - edit /etc/motion/motion.conf to use the settings you want (that is, video output directory, record only video, record in MPEG-4, set frame rate, etc). Do this with "sudo medit /etc/motion/motion.conf" at a prompt.
* Boot script - create a new script in /etc/rc2.d called "S65motion_client" and set permissions appropriately ("sudo chmod 777 /etc/rc2.d/S65motion_client"). Then edit the file so it has the following text in it:
+
* Boot script - create a new script in /etc/rc2.d called "S65motion_client" and set permissions appropriately ("sudo chmod 777 /etc/rc2.d/S65motion_client"). Then edit the file so it contains the following lines:
  
 
  #! /bin/sh
 
  #! /bin/sh
Line 723: Line 663:
 
This will now launch the motion client as root when you boot up.
 
This will now launch the motion client as root when you boot up.
  
Also note that unless your BeagleBoard can remember the time (battery backed up clock installed) the timestamps will not be correct until you update the time. If your BeagleBoard has an Internet Connection this can be achieved with the ntpdate app.
+
Also note that unless your BeagleBoard can remember the time (battery backed up clock installed), the timestamps will not be correct until you update the time. If your BeagleBoard has an Internet connection this can be achieved using the ntpdate application.
 +
 
 +
== Robotics ==
 +
 
 +
=== ROS ===
 +
ROS (Robot Operating System) provides libraries and tools to help software developers create robot applications. It provides hardware abstraction, device drivers, libraries, visualizers, message-passing, package management, and more. ROS is licensed under an open source, BSD license.
 +
 
 +
There are currently builds of ROS for Ubuntu Trusty armhf. These builds include most but not all packages, and save a considerable amount of time compared to doing a full source-based installation:
 +
 
 +
http://wiki.ros.org/indigo/Installation/UbuntuARM
 +
 
 +
Alternatively ROS can be installed from source and is generally easy to do so (although slow).
 +
 
 +
For more information about ROS, see www.ros.org.

Revision as of 22:03, 15 January 2016

(For BeagleBoardAngstrom, click here.) (Should Beagleboard:Ubuntu On BeagleBone Black be merged into this page?)

This page is about running a Linux distribution (ARM EABI) Ubuntu on the BeagleBoard. BeagleBoard will boot the (ARM EABI) Ubuntu distribution from the SD card. Since much of this page is generic, it has also been extended to help support devices such as the PandaBoard and BeagleBone.

  • For the best experience, make sure you have an LCD/HDMI monitor attached to the BeagleBoard's HDMI port, 2 GB/4 GB/8 GB SD card, and a known good USB 2.0 hub with mouse and keyboard.

Help

If you need any help:

  • Ubuntu related help:
    • #ubuntu-arm: Ubuntu's ARM IRC on Freenode (logs -> year -> month -> day -> #ubuntu-arm.html)
  • When requesting help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Required Beagle Software

Mainline U-Boot:

  • All older BeagleBoard (classic) Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Omap Serial Changes

boot.scr/boot.cmd changes:

With 2.6.35:

console=ttyS2,115200n8

With 2.6.36/37+:

console=ttyO2,115200n8

Serial console login: /etc/init/ttyO2.conf

start on stopped rc RUNLEVEL=[2345]
stop on runlevel [!2345]

respawn
exec /sbin/getty 115200 ttyO2

Method 1: Download a Complete Pre-Configured Image

Demo Image

git clone https://github.com/RobertCNelson/armv7-multiplatform.git
cd armv7-multiplatform
git checkout origin/v4.4.x -b tmp
./build_kernel.sh
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev
git checkout origin/ti-linux-rt-4.1.y -b tmp
./build_kernel.sh

Ubuntu (14.04.3)

Default username/password:

  • username: ubuntu
  • password: temppwd

Image Updated:

  • 2016-01-14
    • BeagleBoard xM: v4.4.0-armv7-x3 kernel
    • BeagleBone White/Black/Green: v4.1.15-ti-rt-r40 kernel
    • OMAP5432 uEVM: v4.1.15-ti-rt-r40 kernel
    • BeagleBoard-X15: v4.1.15-ti-rt-r40 kernel
  • 2015-12-11
    • BeagleBoard xM: v4.3.2-armv7-x1 kernel
    • BeagleBone White/Black/Green: v4.1.13-ti-r36 kernel
    • OMAP5432 uEVM: v4.1.13-ti-r36 kernel
    • BeagleBoard-X15: v4.1.13-ti-r36 kernel
  • 2015-11-13
    • BeagleBoard xM: v4.3.0-armv7-x0 kernel
    • BeagleBone White/Black/Green: v4.1.12-ti-r29 kernel
    • OMAP5432 uEVM: v4.1.12-ti-r29 kernel
    • BeagleBoard-X15: v4.1.12-ti-r29 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
SSH, Port 22: ssh ubuntu@arm.local (Bone: via usb) ubuntu@192.168.7.2
Getty, Serial Port

Default user: ubuntu pass: temppwd

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-01-14/elinux/ubuntu-14.04.3-console-armhf-2016-01-14.tar.xz

Verify Image with:

sha256sum ubuntu-14.04.3-console-armhf-2016-01-14.tar.xz
3f2fa9b8c95ae5f52d2f285f51de5d1d2195fddf28032b10f079c8356ade1f52  ubuntu-14.04.3-console-armhf-2016-01-14.tar.xz

Unpack Image:

tar xf ubuntu-14.04.3-console-armhf-2016-01-14.tar.xz
cd ubuntu-14.04.3-console-armhf-2016-01-14

If you don't know the location of your SD card:

sudo ./setup_sdcard.sh --probe-mmc

You should see something like:

Are you sure? I don't see [/dev/idontknow], here is what I do see...

fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive
Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card

lsblk:
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 465.8G  0 disk 
├─sda1   8:1    0 446.9G  0 part /  <- x86 Root Partition
├─sda2   8:2    0     1K  0 part 
└─sda5   8:5    0  18.9G  0 part [SWAP]
sdd      8:48   1   3.7G  0 disk 
├─sdd1   8:49   1    64M  0 part 
└─sdd2   8:50   1   3.6G  0 part 
  • In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm
  • BeagleBone White/Black/Green - beaglebone
  • OMAP5432 uEVM - omap5-uevm
  • BeagleBoard-X15 - am57xx-beagle-x15

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2016.01 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_ubuntu_trusty_armhf

Testing:

./RootStock-NG.sh -c rcn-ee_console_ubuntu_xenial_armhf

Ubuntu Testing (xenial)

Image Updated:

  • 2016-01-14
    • BeagleBoard xM: v4.4.0-armv7-x3 kernel
    • BeagleBone White/Black/Green: v4.1.15-ti-rt-r40 kernel
    • OMAP5432 uEVM: v4.1.15-ti-rt-r40 kernel
    • BeagleBoard-X15: v4.1.15-ti-rt-r40 kernel
  • 2015-12-11
    • BeagleBoard xM: v4.3.2-armv7-x1 kernel
    • BeagleBone White/Black/Green: v4.1.13-ti-r36 kernel
    • OMAP5432 uEVM: v4.1.13-ti-r36 kernel
    • BeagleBoard-X15: v4.1.13-ti-r36 kernel
  • 2015-11-13
    • BeagleBoard xM: v4.3.0-armv7-x0 kernel
    • BeagleBone White/Black/Green: v4.1.12-ti-r29 kernel
    • OMAP5432 uEVM: v4.1.12-ti-r29 kernel
    • BeagleBoard-X15: v4.1.12-ti-r29 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-01-14/elinux/ubuntu-xenial-console-armhf-2016-01-14.tar.xz

Verify Image with:

sha256sum ubuntu-xenial-console-armhf-2016-01-14.tar.xz
a8b5995584caf58a37e1b454724b4b4e300a21bfd72e2156f30052a104d2b035  ubuntu-xenial-console-armhf-2016-01-14.tar.xz

Unpack image:

tar xf ubuntu-xenial-console-armhf-2016-01-14.tar.xz
cd ubuntu-xenial-console-armhf-2016-01-14

Then follow the directions shown above with the other images...

Flasher

eMMC: BeagleBone Black/Green

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Ubuntu will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: ubuntu pass: temppwd

Image Updated:

  • 2016-01-14
    • BeagleBone Black/Green: v4.1.15-ti-rt-r40 kernel
  • 2015-12-11
    • BeagleBone Black/Green: v4.1.13-ti-r36 kernel
  • 2015-11-13
    • BeagleBone Black/Green: v4.1.12-ti-r29 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-01-14/flasher/BBB-eMMC-flasher-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz
wget https://rcn-ee.com/rootfs/2016-01-14/flasher/BBB-eMMC-flasher-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.bmap

Verify Image with:

sha256sum BBB-eMMC-flasher-ubuntu-14.04.3-console-armhf-2016-01-14-2gb*
cf6cae65a5cceb0bf777a6c9a9826c24991d1a9d9b8dfb3c9d86c980d5628982  BBB-eMMC-flasher-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.bmap
2b02acd35c419b6ae9f91f5b5f99bff8ef918ac9200bea74f10e397c90d2e918  BBB-eMMC-flasher-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap BBB-eMMC-flasher-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.bmap \
BBB-eMMC-flasher-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz /dev/sdX

Linux: (dd)

unxz BBB-eMMC-flasher-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz
sudo dd if=./BBB-eMMC-flasher-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img of=/dev/sdX

eMMC: BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Ubuntu will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: ubuntu pass: temppwd

Image Updated:

  • 2016-01-14
    • BeagleBoard-X15: v4.1.15-ti-rt-r40 kernel
  • 2015-12-11
    • BeagleBoard-X15: v4.1.13-ti-r36 kernel
  • 2015-11-13
    • BeagleBoard-X15: v4.1.12-ti-r29 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-01-14/flasher/bbx15-eMMC-flasher-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz
wget https://rcn-ee.com/rootfs/2016-01-14/flasher/bbx15-eMMC-flasher-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.bmap

Verify Image with:

sha256sum bbx15-eMMC-flasher-ubuntu-14.04.3-console-armhf-2016-01-14-2gb*
9fb1dad893f59dd520b77ebb2561e774154ba150486b0c5073ff14ff238d3a04  bbx15-eMMC-flasher-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.bmap
2164ad445759eb5933aafb286213e393f031dc29d67fb0c1b3d1abcdcf65c406  bbx15-eMMC-flasher-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap bbx15-eMMC-flasher-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.bmap \
bbx15-eMMC-flasher-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz /dev/sdX

Linux: (dd)

unxz bbx15-eMMC-flasher-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz
sudo dd if=./bbx15-eMMC-flasher-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img of=/dev/sdX

raw microSD img

BeagleBone White/Black/Green

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: ubuntu pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2016-01-14
    • BeagleBone White/Black/Green: v4.1.15-ti-rt-r40 kernel
  • 2015-12-11
    • BeagleBone White/Black/Green: v4.1.13-ti-r36 kernel
  • 2015-11-13
    • BeagleBone White/Black/Green: v4.1.12-ti-r29 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-01-14/microsd/bone-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz
wget https://rcn-ee.com/rootfs/2016-01-14/microsd/bone-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.bmap

Verify Image with:

sha256sum bone-ubuntu-14.04.3-console-armhf-2016-01-14-2gb*
4ffbb35026f3f25925d65895da4d17d69aa5133e4d2f7afcf093672073a5fa82  bone-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.bmap
991888ec1ce4fb66e6d6b3d3ab4715983f0082f67508d2bd74581dfb843e3747  bone-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap bone-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.bmap \
bone-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz /dev/sdX

Linux: (dd)

unxz bone-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz
sudo dd if=./bone-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img of=/dev/sdX

OMAP5432 uEVM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: ubuntu pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2016-01-14
    • OMAP5432 uEVM: v4.1.15-ti-rt-r40 kernel
  • 2015-12-11
    • OMAP5432 uEVM: v4.1.13-ti-r36 kernel
  • 2015-11-13
    • OMAP5432 uEVM: v4.1.12-ti-r29 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-01-14/microsd/omap5-uevm-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz
wget https://rcn-ee.com/rootfs/2016-01-14/microsd/omap5-uevm-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.bmap

Verify Image with:

sha256sum omap5-uevm-ubuntu-14.04.3-console-armhf-2016-01-14-2gb*
89759c74dd879900a7757c1abfdcf101f3ee40527c835f86d40159025ddd4d96  omap5-uevm-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.bmap
a7130cc1a143aec3f35b6869ef722fd987b8e0f3e7e51590c3a3d80e82de93f8  omap5-uevm-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap omap5-uevm-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.bmap \
omap5-uevm-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz /dev/sdX

Linux: (dd)

unxz omap5-uevm-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz
sudo dd if=./omap5-uevm-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img of=/dev/sdX

BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on windows: https://wiki.ubuntu.com/Win32DiskImager

User: ubuntu pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2016-01-14
    • BeagleBoard-X15: v4.1.15-ti-rt-r40 kernel
  • 2015-12-11
    • BeagleBoard-X15: v4.1.13-ti-r36 kernel
  • 2015-11-13
    • BeagleBoard-X15: v4.1.12-ti-r29 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2016-01-14/microsd/bbx15-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz
wget https://rcn-ee.com/rootfs/2016-01-14/microsd/bbx15-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.bmap

Verify Image with:

sha256sum bbx15-ubuntu-14.04.3-console-armhf-2016-01-14-2gb*
871a6e0022f14db643c37e81ad0684bb6111e52d90a6184b29d597c4a1b0f7fb  bbx15-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.bmap
938cb6d2c5876bccf7dfa897a22d4a56a21f4ea05bff78cdde589060700ac9a2  bbx15-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz

Linux: (bmaptool 3.2)

sudo bmaptool copy --bmap bbx15-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.bmap \
bbx15-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz /dev/sdX

Linux: (dd)

unxz bbx15-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img.xz
sudo dd if=./bbx15-ubuntu-14.04.3-console-armhf-2016-01-14-2gb.img of=/dev/sdX

Method 2: Use the NetInstall method

You will need a 1GB/2GB/4GB/8GB SD card or greater.

Standard system : ~700 MB

Report Bugs/Issues to: https://github.com/RobertCNelson/netinstall/issues (anywhere else will be ignored..)

Download the netinstall script:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Currently supported Ubuntu distributions:

--distro oneiric (11.10)
--distro precise-armhf (12.04)
--distro quantal (12.10)
--distro raring (13.04)
--distro saucy (13.10)

Device: <board> selection:

*BeagleBoard Ax/Bx/Cx  - omap3-beagle
*BeagleBoard xMA/B/C   - omap3-beagle-xm
*BeagleBone Ax         - am335x-bone-serial
*BeagleBone (DVI cape) - am335x-bone-video
*BeagleBone Black      - am335x-boneblack
*PandaBoard Ax     - omap4-panda
*PandaBoard A4+    - omap4-panda-a4
*PandaBoard ES     - omap4-panda-es

Installation script for new <board> selection: (slowly migrating all devices to this method)

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb <board> --distro <distro>

So for the xM: with quantal:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro quantal
  • Other Options:
    • --firmware : installs firmware
    • --serial-mode : debian-installer uses Serial Port

Place SD card into BeagleBoard and boot:

Configure the network:

usb0: USB net <- (usually the OTG port)
eth0: USB net <- (usually the smsc95xx adapter on the BeagleBoard and PandaBoard)
wlan0: Wifi <- Your USDB-Wi-Fi device.. 

See my notes for my testing procedure: https://github.com/RobertCNelson/netinstall/blob/master/test.Ubuntu

Troubleshooting: If booting fails..

  • Hold the user button down to force booting from MMC
  • Upgrade X-loader and U-boot Upgrade X-loader and U-Boot
  • Clear U-boot's Environment Variables in NAND:
nand erase 260000 20000

NetInstall assumptions:

Assume asll <default>'s... Thanks you preseed.conf!!!

Method 3: Manual Install (no automatic scripts)

Note, this section used to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Advanced

Install Latest Kernel Image

General apt syntax for searching and installing a specific kernel:

sudo apt-get update
sudo apt-cache search linux-image | grep <branch>
sudo apt-get install linux-image-<specific version>
sudo reboot

Latest kernel script

cd /opt/scripts/tools/
git pull
sudo ./update_kernel.sh <OPTIONS>

3.8.x

This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8
3.8.x BeagleBone/BeagleBone Black FULL Cape Support
--bone-channel --stable
3.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai
--bone-xenomai-channel --stable

4.1.x-ti

This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled.

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.1
Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.1.y
4.1.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
--ti-channel --stable
4.1.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
--ti-rt-channel --stable

Mainline (lts)

4.1.x BeagleBone/BeagleBone Black + SGX
--bone-kernel --lts
4.1.x BeagleBone/BeagleBone Black + RT + SGX
--bone-rt-kernel --lts

Mainline

4.3.x BeagleBone/BeagleBone Black
--bone-kernel --testing

Debian 8: jessie

sudo apt-get install linux-image-armmp

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

Note, these are FBDEV only, no xorg/x11/etc...

Install the "4.1.x" lts/bone kernel: http://elinux.org/BeagleBoardUbuntu#Mainline_.28lts.29

Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)

git clone https://github.com/RobertCNelson/bb-kernel.git
cd bb-kernel/
git checkout origin/am33x-v4.1 -b tmp-sgx
./sgx_create_package.sh

Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install

sudo tar xfv GFX_5.01.01.02.tar.gz -C /
cd /opt/gfxinstall/
sudo ./sgx-install.sh
sudo reboot

Verify omaplfb & pvrsrvkm loaded

debian@arm:~$ lsmod | grep omaplfb
omaplfb                12065  0 
pvrsrvkm              178782  1 omaplfb

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

Swapfile

Using a File for Swap Instead of a Partition

On the Beagleboard you should expect to require a swap file given the limitation of how little RAM is available (between 256 MB and 512 MB). Some system programs like apt-get will only run properly when some swap space is present (due to 256 MB not being enough RAM).

Some images (such as those from Linaro.org) do not come with a swap partition or any swap space allocated.

Under Linux, swap space can be either a dedicated partition or a swap file. Both can be mounted as swap which the OS can access.

Creating a Swapfile

The following commands will create a 1 GB file, limit access only to root, format it as swap and then make it available to the OS:

sudo mkdir -p /var/cache/swap/   
sudo dd if=/dev/zero of=/var/cache/swap/swapfile bs=1M count=1024
sudo chmod 0600 /var/cache/swap/swapfile 
sudo mkswap /var/cache/swap/swapfile 
sudo swapon /var/cache/swap/swapfile 

To tell the OS to load this swapfile on each start up, edit the /etc/fstab file to include the following additional line:

/var/cache/swap/swapfile    none    swap    sw    0   0

To verify that the swapfile is accessilble as swap to the OS, run "top" or "htop" at a console.

Ubuntu Software

Wi-Fi Networking (command line)

/etc/network/interfaces

It is relatively easy to configure a Wi-Fi card from the command line.

You will need to edit the /etc/network/interfaces file. There are several guides available via Google.

This is a particularly useful guide https://ubuntuforums.org/showthread.php?t=202834

A sample /etc/network/interfaces file for a WPA2 encrypted access point is:

auto lo
iface lo inet loopback
auto wlan0
iface wlan0 inet dhcp
wpa-driver wext
wpa-ssid <NAME OF AP>
wpa-ap-scan 1
wpa-proto RSN
wpa-pairwise CCMP
wpa-group CCMP
wpa-key-mgmt WPA-PSK
wpa-psk <INSERT KEY XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX>

Your Wi-Fi card will automatically load these settings upon startup and initialize wireless network access.

Lightweight window managers

If you intend to use Ubuntu on the BeagleBoard you can install JWM or IceWM to improve performance.

JWM in particular uses little RAM. On a BeagleBoard with 256 MB, using JWM will leave about 60 MB free in which to run applications.

Web Apps

Midori

Given that the BeagleBoard has fewer resources than a desktop a lightweight browser is more responsive. Midori is a lightweight browser that still supports flash, etc. It is available from the standard repositories: http://en.wikipedia.org/wiki/Midori_%28web_browser%29

Surveillance

Motion

If you have a video source (webcam, IP cam, etc.) which appears as /dev/video0, etc. then you can use the Linux surveillance software "motion" to monitor the video stream and record periods of activity.

Motion is also available from the standard repositories: http://www.debian-administration.org/article/An_Introduction_to_Video_Surveillance_with_%27Motion%27 Using a 960x720 resolution webcam with a 15 fps rate under the UVC driver the Rev C BeagleBoard under Xubuntu reports ~60% CPU utilisation.

To make the BeagleBoard automatically start recording on boot, do the following:

  • Auto Login - run "gdmsetup" from a terminal and select a user to automatically login
  • Sessions - make sure you don't save any previous X Windows sessions so that it doesn't prompt you for which one you want
  • motion.conf - edit /etc/motion/motion.conf to use the settings you want (that is, video output directory, record only video, record in MPEG-4, set frame rate, etc). Do this with "sudo medit /etc/motion/motion.conf" at a prompt.
  • Boot script - create a new script in /etc/rc2.d called "S65motion_client" and set permissions appropriately ("sudo chmod 777 /etc/rc2.d/S65motion_client"). Then edit the file so it contains the following lines:
#! /bin/sh
/usr/bin/motion -c /etc/motion/motion.conf

This will now launch the motion client as root when you boot up.

Also note that unless your BeagleBoard can remember the time (battery backed up clock installed), the timestamps will not be correct until you update the time. If your BeagleBoard has an Internet connection this can be achieved using the ntpdate application.

Robotics

ROS

ROS (Robot Operating System) provides libraries and tools to help software developers create robot applications. It provides hardware abstraction, device drivers, libraries, visualizers, message-passing, package management, and more. ROS is licensed under an open source, BSD license.

There are currently builds of ROS for Ubuntu Trusty armhf. These builds include most but not all packages, and save a considerable amount of time compared to doing a full source-based installation:

http://wiki.ros.org/indigo/Installation/UbuntuARM

Alternatively ROS can be installed from source and is generally easy to do so (although slow).

For more information about ROS, see www.ros.org.