Difference between revisions of "BeagleBoardUbuntu"
m (→Method 1: Download a Complete Pre-Configured Image: 2016-10-06) |
m (→Method 1: Download a Complete Pre-Configured Image: 2017-04-07) |
||
(5 intermediate revisions by the same user not shown) | |||
Line 55: | Line 55: | ||
= Method 1: Download a Complete Pre-Configured Image = | = Method 1: Download a Complete Pre-Configured Image = | ||
+ | |||
== Demo Image == | == Demo Image == | ||
Line 60: | Line 61: | ||
git clone https://github.com/RobertCNelson/armv7-multiplatform.git | git clone https://github.com/RobertCNelson/armv7-multiplatform.git | ||
cd armv7-multiplatform | cd armv7-multiplatform | ||
− | git checkout origin/v4. | + | git checkout origin/v4.9.x -b tmp |
./build_kernel.sh | ./build_kernel.sh | ||
* '''Advanced Users only''': BeagleBone/BeagleBone Black: Kernel v4.4.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.4.y | * '''Advanced Users only''': BeagleBone/BeagleBone Black: Kernel v4.4.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.4.y | ||
Line 68: | Line 69: | ||
./build_kernel.sh | ./build_kernel.sh | ||
− | === Ubuntu (16.04. | + | === Ubuntu (16.04.2) === |
Default username/password: | Default username/password: | ||
Line 75: | Line 76: | ||
Image Updated: | Image Updated: | ||
− | * | + | *2017-04-07 |
− | ** BeagleBoard xM: v4. | + | ** BeagleBoard xM: v4.9.20-armv7-x4 kernel |
− | ** BeagleBone | + | ** All BeagleBone Varients: v4.4.59-ti-r96 kernel |
− | ** OMAP5432 uEVM: v4.4. | + | ** OMAP5432 uEVM: v4.4.59-ti-r96 kernel |
− | ** BeagleBoard-X15: v4.4. | + | ** BeagleBoard-X15: v4.4.59-ti-r96 kernel |
− | * | + | *2017-03-09 |
− | ** BeagleBoard xM: v4. | + | ** BeagleBoard xM: v4.9.13-armv7-x4 kernel |
− | ** BeagleBone | + | ** All BeagleBone Varients: v4.4.52-ti-r91 kernel |
− | ** OMAP5432 uEVM: v4.4. | + | ** OMAP5432 uEVM: v4.4.52-ti-r91 kernel |
− | ** BeagleBoard-X15: v4.4. | + | ** BeagleBoard-X15: v4.4.52-ti-r91 kernel |
− | * | + | *2017-01-23 |
− | ** BeagleBoard xM: v4. | + | ** BeagleBoard xM: v4.9.5-armv7-x4 kernel |
− | ** BeagleBone | + | ** All BeagleBone Varients: v4.4.43-ti-r84 kernel |
− | ** OMAP5432 uEVM: v4.4. | + | ** OMAP5432 uEVM: v4.4.43-ti-r84 kernel |
− | ** BeagleBoard-X15: v4.4. | + | ** BeagleBoard-X15: v4.4.43-ti-r84 kernel |
Services Active: | Services Active: | ||
Line 100: | Line 101: | ||
Get prebuilt image: | Get prebuilt image: | ||
− | wget https://rcn-ee.com/rootfs/ | + | wget https://rcn-ee.com/rootfs/2017-04-07/elinux/ubuntu-16.04.2-console-armhf-2017-04-07.tar.xz |
Verify Image with: | Verify Image with: | ||
− | sha256sum ubuntu-16.04. | + | sha256sum ubuntu-16.04.2-console-armhf-2017-04-07.tar.xz |
− | + | 64de5579785ee728e701827aff227c74f59e76c51772fc2427aef48a62a6cf08 ubuntu-16.04.2-console-armhf-2017-04-07.tar.xz | |
Unpack Image: | Unpack Image: | ||
− | tar xf ubuntu-16.04. | + | tar xf ubuntu-16.04.2-console-armhf-2017-04-07.tar.xz |
− | cd ubuntu-16.04. | + | cd ubuntu-16.04.2-console-armhf-2017-04-07 |
If you don't know the location of your SD card: | If you don't know the location of your SD card: | ||
Line 141: | Line 142: | ||
*BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle | *BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle | ||
*BeagleBoard xM - omap3-beagle-xm | *BeagleBoard xM - omap3-beagle-xm | ||
− | *BeagleBone | + | *All BeagleBone Varients - beaglebone |
*OMAP5432 uEVM - omap5-uevm | *OMAP5432 uEVM - omap5-uevm | ||
*BeagleBoard-X15 - am57xx-beagle-x15 | *BeagleBoard-X15 - am57xx-beagle-x15 | ||
Line 152: | Line 153: | ||
git clone https://github.com/RobertCNelson/omap-image-builder.git | git clone https://github.com/RobertCNelson/omap-image-builder.git | ||
cd omap-image-builder | cd omap-image-builder | ||
− | git checkout | + | git checkout v2017.04 -b tmp |
Stable: | Stable: | ||
Line 160: | Line 161: | ||
== Flasher == | == Flasher == | ||
− | === eMMC: BeagleBone | + | === eMMC: All BeagleBone Varients with eMMC === |
− | This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on | + | This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Ubuntu will now boot directly from eMMC. |
Script for reference: (this is the script that writes to the eMMC) | Script for reference: (this is the script that writes to the eMMC) | ||
Line 177: | Line 178: | ||
Image Updated: | Image Updated: | ||
− | * | + | *2017-04-07 |
− | ** BeagleBone | + | ** All BeagleBone Varients with eMMC: v4.4.59-ti-r96 kernel |
− | * | + | *2017-03-09 |
− | ** BeagleBone | + | ** All BeagleBone Varients with eMMC: v4.4.52-ti-r91 kernel |
− | * | + | *2017-01-23 |
− | ** BeagleBone | + | ** All BeagleBone Varients with eMMC: v4.4.43-ti-r84 kernel |
Get prebuilt image: | Get prebuilt image: | ||
− | wget https://rcn-ee.com/rootfs/ | + | wget https://rcn-ee.com/rootfs/2017-04-07/flasher/BBB-eMMC-flasher-ubuntu-16.04.2-console-armhf-2017-04-07-2gb.img.xz |
Verify Image with: | Verify Image with: | ||
− | sha256sum BBB-eMMC-flasher-ubuntu-16.04. | + | sha256sum BBB-eMMC-flasher-ubuntu-16.04.2-console-armhf-2017-04-07-2gb* |
− | + | 9797d7eb42bf28d764dbedea9658d952c4032bda2c8da6382f959ede970e9773 BBB-eMMC-flasher-ubuntu-16.04.2-console-armhf-2017-04-07-2gb.img.xz | |
Windows/Mac/Linux gui | Windows/Mac/Linux gui | ||
Line 195: | Line 196: | ||
Linux: (dd) | Linux: (dd) | ||
− | xzcat BBB-eMMC-flasher-ubuntu-16.04. | + | xzcat BBB-eMMC-flasher-ubuntu-16.04.2-console-armhf-2017-04-07-2gb.img.xz | sudo dd of=/dev/sdX |
=== eMMC: BeagleBoard-X15 === | === eMMC: BeagleBoard-X15 === | ||
− | This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on | + | This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Ubuntu will now boot directly from eMMC. |
Script for reference: (this is the script that writes to the eMMC) | Script for reference: (this is the script that writes to the eMMC) | ||
Line 214: | Line 215: | ||
Image Updated: | Image Updated: | ||
− | * | + | *2017-04-07 |
− | ** BeagleBoard-X15: v4.4. | + | ** BeagleBoard-X15: v4.4.59-ti-r96 kernel |
− | * | + | *2017-03-09 |
− | ** BeagleBoard-X15: v4.4. | + | ** BeagleBoard-X15: v4.4.52-ti-r91 kernel |
− | * | + | *2017-01-23 |
− | ** BeagleBoard-X15: v4.4. | + | ** BeagleBoard-X15: v4.4.43-ti-r84 kernel |
Get prebuilt image: | Get prebuilt image: | ||
− | wget https://rcn-ee.com/rootfs/ | + | wget https://rcn-ee.com/rootfs/2017-04-07/flasher/bbx15-eMMC-flasher-ubuntu-16.04.2-console-armhf-2017-04-07-2gb.img.xz |
Verify Image with: | Verify Image with: | ||
− | sha256sum bbx15-eMMC-flasher-ubuntu-16.04. | + | sha256sum bbx15-eMMC-flasher-ubuntu-16.04.2-console-armhf-2017-04-07-2gb* |
− | + | 24c46c6bced927258276bc4802dcfcde0396b8e0a1d6ca655bd4c4503352fcc0 bbx15-eMMC-flasher-ubuntu-16.04.2-console-armhf-2017-04-07-2gb.img.xz | |
Windows/Mac/Linux gui | Windows/Mac/Linux gui | ||
Line 232: | Line 233: | ||
Linux: (dd) | Linux: (dd) | ||
− | xzcat bbx15-eMMC-flasher-ubuntu-16.04. | + | xzcat bbx15-eMMC-flasher-ubuntu-16.04.2-console-armhf-2017-04-07-2gb.img.xz | sudo dd of=/dev/sdX |
== raw microSD img == | == raw microSD img == | ||
Line 238: | Line 239: | ||
=== BeagleBoard xM === | === BeagleBoard xM === | ||
− | This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on | + | This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io |
User: ubuntu | User: ubuntu | ||
Line 250: | Line 251: | ||
Image Updated: | Image Updated: | ||
− | * | + | *2017-04-07 |
− | ** BeagleBoard xM: v4. | + | ** BeagleBoard xM: v4.9.20-armv7-x4 kernel |
− | * | + | *2017-03-09 |
− | ** BeagleBoard xM: v4. | + | ** BeagleBoard xM: v4.9.13-armv7-x4 kernel |
− | * | + | *2017-01-23 |
− | ** BeagleBoard xM: v4. | + | ** BeagleBoard xM: v4.9.5-armv7-x4 kernel |
Get prebuilt image: | Get prebuilt image: | ||
− | wget https://rcn-ee.com/rootfs/ | + | wget https://rcn-ee.com/rootfs/2017-04-07/microsd/bbxm-ubuntu-16.04.2-console-armhf-2017-04-07-2gb.img.xz |
Verify Image with: | Verify Image with: | ||
− | sha256sum bbxm-ubuntu-16.04. | + | sha256sum bbxm-ubuntu-16.04.2-console-armhf-2017-04-07-2gb* |
− | + | 5a766aa2190ffe6f27d96367ff5388c62df30730572627c5c6afeba7befe3c6a bbxm-ubuntu-16.04.2-console-armhf-2017-04-07-2gb.img.xz | |
Windows/Mac/Linux gui | Windows/Mac/Linux gui | ||
Line 268: | Line 269: | ||
Linux: (dd) | Linux: (dd) | ||
− | xzcat bbxm-ubuntu-16.04. | + | xzcat bbxm-ubuntu-16.04.2-console-armhf-2017-04-07-2gb.img.xz | sudo dd of=/dev/sdX |
− | === BeagleBone | + | === All BeagleBone Varients === |
− | This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on | + | This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io |
User: ubuntu | User: ubuntu | ||
Line 284: | Line 285: | ||
Image Updated: | Image Updated: | ||
− | * | + | *2017-04-07 |
− | ** BeagleBone | + | ** All BeagleBone Varients: v4.4.59-ti-r96 kernel |
− | * | + | *2017-03-09 |
− | ** BeagleBone | + | ** All BeagleBone Varients: v4.4.52-ti-r91 kernel |
− | * | + | *2017-01-23 |
− | ** BeagleBone | + | ** All BeagleBone Varients: v4.4.43-ti-r84 kernel |
Get prebuilt image: | Get prebuilt image: | ||
− | wget https://rcn-ee.com/rootfs/ | + | wget https://rcn-ee.com/rootfs/2017-04-07/microsd/bone-ubuntu-16.04.2-console-armhf-2017-04-07-2gb.img.xz |
Verify Image with: | Verify Image with: | ||
− | sha256sum bone-ubuntu-16.04. | + | sha256sum bone-ubuntu-16.04.2-console-armhf-2017-04-07-2gb* |
− | + | fee218313718492a6c5ea0795ed70b1d45a82adc202164387ee1ee97f39847f4 bone-ubuntu-16.04.2-console-armhf-2017-04-07-2gb.img.xz | |
Windows/Mac/Linux gui | Windows/Mac/Linux gui | ||
Line 302: | Line 303: | ||
Linux: (dd) | Linux: (dd) | ||
− | xzcat bone-ubuntu-16.04. | + | xzcat bone-ubuntu-16.04.2-console-armhf-2017-04-07-2gb.img.xz | sudo dd of=/dev/sdX |
=== OMAP5432 uEVM === | === OMAP5432 uEVM === | ||
− | This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on | + | This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io |
User: ubuntu | User: ubuntu | ||
Line 318: | Line 319: | ||
Image Updated: | Image Updated: | ||
− | * | + | *2017-04-07 |
− | ** OMAP5432 uEVM: v4.4. | + | ** OMAP5432 uEVM: v4.4.59-ti-r96 kernel |
− | * | + | *2017-03-09 |
− | ** OMAP5432 uEVM: v4.4. | + | ** OMAP5432 uEVM: v4.4.52-ti-r91 kernel |
− | * | + | *2017-01-23 |
− | ** OMAP5432 uEVM: v4.4. | + | ** OMAP5432 uEVM: v4.4.43-ti-r84 kernel |
Get prebuilt image: | Get prebuilt image: | ||
− | wget https://rcn-ee.com/rootfs/ | + | wget https://rcn-ee.com/rootfs/2017-04-07/microsd/omap5-uevm-ubuntu-16.04.2-console-armhf-2017-04-07-2gb.img.xz |
Verify Image with: | Verify Image with: | ||
− | sha256sum omap5-uevm-ubuntu-16.04. | + | sha256sum omap5-uevm-ubuntu-16.04.2-console-armhf-2017-04-07-2gb* |
− | + | a5a492b1b9f840b25a8ca399ac7bc7d931a41303d038adf2815d39515d6f223c omap5-uevm-ubuntu-16.04.2-console-armhf-2017-04-07-2gb.img.xz | |
Windows/Mac/Linux gui | Windows/Mac/Linux gui | ||
Line 336: | Line 337: | ||
Linux: (dd) | Linux: (dd) | ||
− | xzcat omap5-uevm-ubuntu-16.04. | + | xzcat omap5-uevm-ubuntu-16.04.2-console-armhf-2017-04-07-2gb.img.xz | sudo dd of=/dev/sdX |
=== BeagleBoard-X15 === | === BeagleBoard-X15 === | ||
− | This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on | + | This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io |
User: ubuntu | User: ubuntu | ||
Line 352: | Line 353: | ||
Image Updated: | Image Updated: | ||
− | * | + | *2017-04-07 |
− | ** BeagleBoard-X15: v4.4. | + | ** BeagleBoard-X15: v4.4.59-ti-r96 kernel |
− | * | + | *2017-03-09 |
− | ** BeagleBoard-X15: v4.4. | + | ** BeagleBoard-X15: v4.4.52-ti-r91 kernel |
− | * | + | *2017-01-23 |
− | ** BeagleBoard-X15: v4.4. | + | ** BeagleBoard-X15: v4.4.43-ti-r84 kernel |
Get prebuilt image: | Get prebuilt image: | ||
− | wget https://rcn-ee.com/rootfs/ | + | wget https://rcn-ee.com/rootfs/2017-04-07/microsd/bbx15-ubuntu-16.04.2-console-armhf-2017-04-07-2gb.img.xz |
Verify Image with: | Verify Image with: | ||
− | sha256sum bbx15-ubuntu-16.04. | + | sha256sum bbx15-ubuntu-16.04.2-console-armhf-2017-04-07-2gb* |
− | + | 34f8f1932425ce4556b37687ebed0041095d0292f22407b84df6350c8969b2a7 bbx15-ubuntu-16.04.2-console-armhf-2017-04-07-2gb.img.xz | |
Windows/Mac/Linux gui | Windows/Mac/Linux gui | ||
Line 370: | Line 371: | ||
Linux: (dd) | Linux: (dd) | ||
− | xzcat bbx15-ubuntu-16.04. | + | xzcat bbx15-ubuntu-16.04.2-console-armhf-2017-04-07-2gb.img.xz | sudo dd of=/dev/sdX |
= Method 2: Use the NetInstall method= | = Method 2: Use the NetInstall method= | ||
Line 470: | Line 471: | ||
--bone-xenomai-channel --stable | --bone-xenomai-channel --stable | ||
− | == 4. | + | == 4.4.x-ti == |
This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled. | This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled. | ||
− | beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4. | + | beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.4 |
− | + | ||
+ | 4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 | ||
+ | --ti-channel --lts-4_4 | ||
− | 4. | + | 4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT |
− | --ti-channel -- | + | --ti-rt-channel --lts-4_4 |
− | 4. | + | 4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT |
− | + | -ti-xenomai-channel --lts-4_4 | |
== Mainline (lts) == | == Mainline (lts) == | ||
− | 4. | + | 4.4.x BeagleBone/BeagleBone Black + SGX |
− | + | --bone-kernel --lts-4_4 | |
− | |||
− | |||
− | --bone | ||
− | |||
− | |||
− | |||
− | |||
− | + | 4.4.x BeagleBone/BeagleBone Black + RT + SGX | |
− | + | --bone-rt-kernel --lts-4_4 | |
Reboot with your new Kernel Image. | Reboot with your new Kernel Image. |
Revision as of 09:49, 7 April 2017
(For BeagleBoardAngstrom, click here.) (Should Beagleboard:Ubuntu On BeagleBone Black be merged into this page?)
This page is about running a Linux distribution (ARM EABI) Ubuntu on the BeagleBoard. BeagleBoard will boot the (ARM EABI) Ubuntu distribution from the SD card. Since much of this page is generic, it has also been extended to help support devices such as the PandaBoard and BeagleBone.
- For the best experience, make sure you have an LCD/HDMI monitor attached to the BeagleBoard's HDMI port, 2 GB/4 GB/8 GB SD card, and a known good USB 2.0 hub with mouse and keyboard.
Contents
Help
If you need any help:
- Kernel related help:
- Email Beagleboard user group *Recommended method
- #beagle: Beagle IRC on Freenode, accessible also by web interface (logs)
- Kernel Trees
- Ubuntu related help:
- #ubuntu-arm: Ubuntu's ARM IRC on Freenode (logs -> year -> month -> day -> #ubuntu-arm.html)
- When requesting help, please provide some debugging information:
- U-Boot Version installed on board
- Kernel Version: uname -a
- pastebin dmesg
- Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
Required Beagle Software
Mainline U-Boot:
- All older BeagleBoard (classic) Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions
- XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
- Directions: Upgrade X-loader and U-Boot
Omap Serial Changes
boot.scr/boot.cmd changes:
With 2.6.35:
console=ttyS2,115200n8
With 2.6.36/37+:
console=ttyO2,115200n8
Serial console login: /etc/init/ttyO2.conf
start on stopped rc RUNLEVEL=[2345] stop on runlevel [!2345] respawn exec /sbin/getty 115200 ttyO2
Method 1: Download a Complete Pre-Configured Image
Demo Image
- Advanced Users only: BeagleBoard xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform
git clone https://github.com/RobertCNelson/armv7-multiplatform.git cd armv7-multiplatform git checkout origin/v4.9.x -b tmp ./build_kernel.sh
- Advanced Users only: BeagleBone/BeagleBone Black: Kernel v4.4.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.4.y
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git cd ti-linux-kernel-dev git checkout origin/ti-linux-4.4.y -b tmp ./build_kernel.sh
Ubuntu (16.04.2)
Default username/password:
- username: ubuntu
- password: temppwd
Image Updated:
- 2017-04-07
- BeagleBoard xM: v4.9.20-armv7-x4 kernel
- All BeagleBone Varients: v4.4.59-ti-r96 kernel
- OMAP5432 uEVM: v4.4.59-ti-r96 kernel
- BeagleBoard-X15: v4.4.59-ti-r96 kernel
- 2017-03-09
- BeagleBoard xM: v4.9.13-armv7-x4 kernel
- All BeagleBone Varients: v4.4.52-ti-r91 kernel
- OMAP5432 uEVM: v4.4.52-ti-r91 kernel
- BeagleBoard-X15: v4.4.52-ti-r91 kernel
- 2017-01-23
- BeagleBoard xM: v4.9.5-armv7-x4 kernel
- All BeagleBone Varients: v4.4.43-ti-r84 kernel
- OMAP5432 uEVM: v4.4.43-ti-r84 kernel
- BeagleBoard-X15: v4.4.43-ti-r84 kernel
Services Active:
Note: Depending on your internal network these may work out of the box Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2 SSH, Port 22: ssh ubuntu@arm.local (Bone: via usb) ubuntu@192.168.7.2 Getty, Serial Port
Default user: ubuntu pass: temppwd
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2017-04-07/elinux/ubuntu-16.04.2-console-armhf-2017-04-07.tar.xz
Verify Image with:
sha256sum ubuntu-16.04.2-console-armhf-2017-04-07.tar.xz 64de5579785ee728e701827aff227c74f59e76c51772fc2427aef48a62a6cf08 ubuntu-16.04.2-console-armhf-2017-04-07.tar.xz
Unpack Image:
tar xf ubuntu-16.04.2-console-armhf-2017-04-07.tar.xz cd ubuntu-16.04.2-console-armhf-2017-04-07
If you don't know the location of your SD card:
sudo ./setup_sdcard.sh --probe-mmc
You should see something like:
Are you sure? I don't see [/dev/idontknow], here is what I do see... fdisk -l: Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card lsblk: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 465.8G 0 disk ├─sda1 8:1 0 446.9G 0 part / <- x86 Root Partition ├─sda2 8:2 0 1K 0 part └─sda5 8:5 0 18.9G 0 part [SWAP] sdd 8:48 1 3.7G 0 disk ├─sdd1 8:49 1 64M 0 part └─sdd2 8:50 1 3.6G 0 part
- In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...
Install Image:
Quick install script for [board]
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
board options:
- BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
- BeagleBoard xM - omap3-beagle-xm
- All BeagleBone Varients - beaglebone
- OMAP5432 uEVM - omap5-uevm
- BeagleBoard-X15 - am57xx-beagle-x15
So for the BeagleBoard xM:
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
Advanced: Build Image:
git clone https://github.com/RobertCNelson/omap-image-builder.git cd omap-image-builder git checkout v2017.04 -b tmp
Stable:
./RootStock-NG.sh -c rcn-ee_console_ubuntu_xenial_armhf
Flasher
eMMC: All BeagleBone Varients with eMMC
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Ubuntu will now boot directly from eMMC.
Script for reference: (this is the script that writes to the eMMC)
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
This script will only take about 5-6 Minutes after power on.
Notes:
- If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
- If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
User: ubuntu pass: temppwd
Image Updated:
- 2017-04-07
- All BeagleBone Varients with eMMC: v4.4.59-ti-r96 kernel
- 2017-03-09
- All BeagleBone Varients with eMMC: v4.4.52-ti-r91 kernel
- 2017-01-23
- All BeagleBone Varients with eMMC: v4.4.43-ti-r84 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2017-04-07/flasher/BBB-eMMC-flasher-ubuntu-16.04.2-console-armhf-2017-04-07-2gb.img.xz
Verify Image with:
sha256sum BBB-eMMC-flasher-ubuntu-16.04.2-console-armhf-2017-04-07-2gb* 9797d7eb42bf28d764dbedea9658d952c4032bda2c8da6382f959ede970e9773 BBB-eMMC-flasher-ubuntu-16.04.2-console-armhf-2017-04-07-2gb.img.xz
Windows/Mac/Linux gui
http://etcher.io
Linux: (dd)
xzcat BBB-eMMC-flasher-ubuntu-16.04.2-console-armhf-2017-04-07-2gb.img.xz | sudo dd of=/dev/sdX
eMMC: BeagleBoard-X15
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Ubuntu will now boot directly from eMMC.
Script for reference: (this is the script that writes to the eMMC)
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
This script will only take about 5-6 Minutes after power on.
Notes:
- If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
- If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
User: ubuntu pass: temppwd
Image Updated:
- 2017-04-07
- BeagleBoard-X15: v4.4.59-ti-r96 kernel
- 2017-03-09
- BeagleBoard-X15: v4.4.52-ti-r91 kernel
- 2017-01-23
- BeagleBoard-X15: v4.4.43-ti-r84 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2017-04-07/flasher/bbx15-eMMC-flasher-ubuntu-16.04.2-console-armhf-2017-04-07-2gb.img.xz
Verify Image with:
sha256sum bbx15-eMMC-flasher-ubuntu-16.04.2-console-armhf-2017-04-07-2gb* 24c46c6bced927258276bc4802dcfcde0396b8e0a1d6ca655bd4c4503352fcc0 bbx15-eMMC-flasher-ubuntu-16.04.2-console-armhf-2017-04-07-2gb.img.xz
Windows/Mac/Linux gui
http://etcher.io
Linux: (dd)
xzcat bbx15-eMMC-flasher-ubuntu-16.04.2-console-armhf-2017-04-07-2gb.img.xz | sudo dd of=/dev/sdX
raw microSD img
BeagleBoard xM
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
User: ubuntu pass: temppwd
Auto partition resize:
cd /opt/scripts/tools git pull ./grow_partition.sh sudo reboot
Image Updated:
- 2017-04-07
- BeagleBoard xM: v4.9.20-armv7-x4 kernel
- 2017-03-09
- BeagleBoard xM: v4.9.13-armv7-x4 kernel
- 2017-01-23
- BeagleBoard xM: v4.9.5-armv7-x4 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2017-04-07/microsd/bbxm-ubuntu-16.04.2-console-armhf-2017-04-07-2gb.img.xz
Verify Image with:
sha256sum bbxm-ubuntu-16.04.2-console-armhf-2017-04-07-2gb* 5a766aa2190ffe6f27d96367ff5388c62df30730572627c5c6afeba7befe3c6a bbxm-ubuntu-16.04.2-console-armhf-2017-04-07-2gb.img.xz
Windows/Mac/Linux gui
http://etcher.io
Linux: (dd)
xzcat bbxm-ubuntu-16.04.2-console-armhf-2017-04-07-2gb.img.xz | sudo dd of=/dev/sdX
All BeagleBone Varients
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
User: ubuntu pass: temppwd
Auto partition resize:
cd /opt/scripts/tools git pull ./grow_partition.sh sudo reboot
Image Updated:
- 2017-04-07
- All BeagleBone Varients: v4.4.59-ti-r96 kernel
- 2017-03-09
- All BeagleBone Varients: v4.4.52-ti-r91 kernel
- 2017-01-23
- All BeagleBone Varients: v4.4.43-ti-r84 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2017-04-07/microsd/bone-ubuntu-16.04.2-console-armhf-2017-04-07-2gb.img.xz
Verify Image with:
sha256sum bone-ubuntu-16.04.2-console-armhf-2017-04-07-2gb* fee218313718492a6c5ea0795ed70b1d45a82adc202164387ee1ee97f39847f4 bone-ubuntu-16.04.2-console-armhf-2017-04-07-2gb.img.xz
Windows/Mac/Linux gui
http://etcher.io
Linux: (dd)
xzcat bone-ubuntu-16.04.2-console-armhf-2017-04-07-2gb.img.xz | sudo dd of=/dev/sdX
OMAP5432 uEVM
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
User: ubuntu pass: temppwd
Auto partition resize:
cd /opt/scripts/tools git pull ./grow_partition.sh sudo reboot
Image Updated:
- 2017-04-07
- OMAP5432 uEVM: v4.4.59-ti-r96 kernel
- 2017-03-09
- OMAP5432 uEVM: v4.4.52-ti-r91 kernel
- 2017-01-23
- OMAP5432 uEVM: v4.4.43-ti-r84 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2017-04-07/microsd/omap5-uevm-ubuntu-16.04.2-console-armhf-2017-04-07-2gb.img.xz
Verify Image with:
sha256sum omap5-uevm-ubuntu-16.04.2-console-armhf-2017-04-07-2gb* a5a492b1b9f840b25a8ca399ac7bc7d931a41303d038adf2815d39515d6f223c omap5-uevm-ubuntu-16.04.2-console-armhf-2017-04-07-2gb.img.xz
Windows/Mac/Linux gui
http://etcher.io
Linux: (dd)
xzcat omap5-uevm-ubuntu-16.04.2-console-armhf-2017-04-07-2gb.img.xz | sudo dd of=/dev/sdX
BeagleBoard-X15
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
User: ubuntu pass: temppwd
Auto partition resize:
cd /opt/scripts/tools git pull ./grow_partition.sh sudo reboot
Image Updated:
- 2017-04-07
- BeagleBoard-X15: v4.4.59-ti-r96 kernel
- 2017-03-09
- BeagleBoard-X15: v4.4.52-ti-r91 kernel
- 2017-01-23
- BeagleBoard-X15: v4.4.43-ti-r84 kernel
Get prebuilt image:
wget https://rcn-ee.com/rootfs/2017-04-07/microsd/bbx15-ubuntu-16.04.2-console-armhf-2017-04-07-2gb.img.xz
Verify Image with:
sha256sum bbx15-ubuntu-16.04.2-console-armhf-2017-04-07-2gb* 34f8f1932425ce4556b37687ebed0041095d0292f22407b84df6350c8969b2a7 bbx15-ubuntu-16.04.2-console-armhf-2017-04-07-2gb.img.xz
Windows/Mac/Linux gui
http://etcher.io
Linux: (dd)
xzcat bbx15-ubuntu-16.04.2-console-armhf-2017-04-07-2gb.img.xz | sudo dd of=/dev/sdX
Method 2: Use the NetInstall method
You will need a 1GB/2GB/4GB/8GB SD card or greater.
Standard system : ~700 MB
Report Bugs/Issues to: https://github.com/RobertCNelson/netinstall/issues (anywhere else will be ignored..)
Download the netinstall script:
git clone https://github.com/RobertCNelson/netinstall.git cd netinstall
Currently supported Ubuntu distributions:
--distro oneiric (11.10) --distro precise-armhf (12.04) --distro quantal (12.10) --distro raring (13.04) --distro saucy (13.10)
Device: <board> selection:
*BeagleBoard Ax/Bx/Cx - omap3-beagle *BeagleBoard xMA/B/C - omap3-beagle-xm *BeagleBone Ax - am335x-bone-serial *BeagleBone (DVI cape) - am335x-bone-video *BeagleBone Black - am335x-boneblack *PandaBoard Ax - omap4-panda *PandaBoard A4+ - omap4-panda-a4 *PandaBoard ES - omap4-panda-es
Installation script for new <board> selection: (slowly migrating all devices to this method)
sudo ./mk_mmc.sh --mmc /dev/sdX --dtb <board> --distro <distro>
So for the xM: with quantal:
sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro quantal
- Other Options:
- --firmware : installs firmware
- --serial-mode : debian-installer uses Serial Port
Place SD card into BeagleBoard and boot:
Configure the network:
usb0: USB net <- (usually the OTG port) eth0: USB net <- (usually the smsc95xx adapter on the BeagleBoard and PandaBoard) wlan0: Wifi <- Your USDB-Wi-Fi device..
See my notes for my testing procedure: https://github.com/RobertCNelson/netinstall/blob/master/test.Ubuntu
Troubleshooting: If booting fails..
- Hold the user button down to force booting from MMC
- Upgrade X-loader and U-boot Upgrade X-loader and U-Boot
- Clear U-boot's Environment Variables in NAND:
nand erase 260000 20000
NetInstall assumptions:
Assume asll <default>'s... Thanks you preseed.conf!!!
Method 3: Manual Install (no automatic scripts)
Note, this section used to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
Beagle/Beagle xM
http://eewiki.net/display/linuxonarm/BeagleBoard
BeagleBone
http://eewiki.net/display/linuxonarm/BeagleBone
BeagleBone Black
http://eewiki.net/display/linuxonarm/BeagleBone+Black
Panda/Panda ES
http://eewiki.net/display/linuxonarm/PandaBoard
Advanced
Install Latest Kernel Image
General apt syntax for searching and installing a specific kernel:
sudo apt-get update sudo apt-cache search linux-image | grep <branch> sudo apt-get install linux-image-<specific version> sudo reboot
Latest kernel script
cd /opt/scripts/tools/ git pull sudo ./update_kernel.sh <OPTIONS>
3.8.x
This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy
beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8
3.8.x BeagleBone/BeagleBone Black FULL Cape Support --bone-channel --stable
3.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai --bone-xenomai-channel --stable
4.4.x-ti
This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled.
beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.4
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 --ti-channel --lts-4_4
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT --ti-rt-channel --lts-4_4
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT -ti-xenomai-channel --lts-4_4
Mainline (lts)
4.4.x BeagleBone/BeagleBone Black + SGX --bone-kernel --lts-4_4
4.4.x BeagleBone/BeagleBone Black + RT + SGX --bone-rt-kernel --lts-4_4
Reboot with your new Kernel Image.
Xorg Drivers
Script:
cd /opt/scripts/tools/ git pull
BeagleBoard/PandaBoard:
cd /opt/scripts/tools/graphics/ ./ti-omapdrm.sh
BeagleBone/BeagleBone Black:
cd /opt/scripts/tools/graphics/ ./ti-tilcdc.sh
SGX Drivers
SGX BeagleBone/BeagleBone Black
Note, these are FBDEV only, no xorg/x11/etc...
Install the "4.1.x" lts/bone kernel: http://elinux.org/BeagleBoardUbuntu#Mainline_.28lts.29
Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
git clone https://github.com/RobertCNelson/bb-kernel.git cd bb-kernel/ git checkout origin/am33x-v4.1 -b tmp-sgx ./sgx_create_package.sh
Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install
sudo tar xfv GFX_5.01.01.02.tar.gz -C / cd /opt/gfxinstall/ sudo ./sgx-install.sh sudo reboot
Verify omaplfb & pvrsrvkm loaded
debian@arm:~$ lsmod | grep omaplfb omaplfb 12065 0 pvrsrvkm 178782 1 omaplfb
Xorg Drivers
Script:
cd /opt/scripts/tools/ git pull
BeagleBoard/PandaBoard:
cd /opt/scripts/tools/graphics/ ./ti-omapdrm.sh
BeagleBone/BeagleBone Black:
cd /opt/scripts/tools/graphics/ ./ti-tilcdc.sh
Swapfile
Using a File for Swap Instead of a Partition
On the Beagleboard you should expect to require a swap file given the limitation of how little RAM is available (between 256 MB and 512 MB). Some system programs like apt-get will only run properly when some swap space is present (due to 256 MB not being enough RAM).
Some images (such as those from Linaro.org) do not come with a swap partition or any swap space allocated.
Under Linux, swap space can be either a dedicated partition or a swap file. Both can be mounted as swap which the OS can access.
Creating a Swapfile
The following commands will create a 1 GB file, limit access only to root, format it as swap and then make it available to the OS:
sudo mkdir -p /var/cache/swap/ sudo dd if=/dev/zero of=/var/cache/swap/swapfile bs=1M count=1024 sudo chmod 0600 /var/cache/swap/swapfile sudo mkswap /var/cache/swap/swapfile sudo swapon /var/cache/swap/swapfile
To tell the OS to load this swapfile on each start up, edit the /etc/fstab file to include the following additional line:
/var/cache/swap/swapfile none swap sw 0 0
To verify that the swapfile is accessilble as swap to the OS, run "top" or "htop" at a console.
Ubuntu Software
Wi-Fi Networking (command line)
/etc/network/interfaces
It is relatively easy to configure a Wi-Fi card from the command line.
You will need to edit the /etc/network/interfaces file. There are several guides available via Google.
This is a particularly useful guide https://ubuntuforums.org/showthread.php?t=202834
A sample /etc/network/interfaces file for a WPA2 encrypted access point is:
auto lo iface lo inet loopback auto wlan0 iface wlan0 inet dhcp wpa-driver wext wpa-ssid <NAME OF AP> wpa-ap-scan 1 wpa-proto RSN wpa-pairwise CCMP wpa-group CCMP wpa-key-mgmt WPA-PSK wpa-psk <INSERT KEY XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX>
Your Wi-Fi card will automatically load these settings upon startup and initialize wireless network access.
Lightweight window managers
If you intend to use Ubuntu on the BeagleBoard you can install JWM or IceWM to improve performance.
JWM in particular uses little RAM. On a BeagleBoard with 256 MB, using JWM will leave about 60 MB free in which to run applications.
Web Apps
Midori
Given that the BeagleBoard has fewer resources than a desktop a lightweight browser is more responsive. Midori is a lightweight browser that still supports flash, etc. It is available from the standard repositories: http://en.wikipedia.org/wiki/Midori_%28web_browser%29
Surveillance
Motion
If you have a video source (webcam, IP cam, etc.) which appears as /dev/video0, etc. then you can use the Linux surveillance software "motion" to monitor the video stream and record periods of activity.
Motion is also available from the standard repositories: http://www.debian-administration.org/article/An_Introduction_to_Video_Surveillance_with_%27Motion%27 Using a 960x720 resolution webcam with a 15 fps rate under the UVC driver the Rev C BeagleBoard under Xubuntu reports ~60% CPU utilisation.
To make the BeagleBoard automatically start recording on boot, do the following:
- Auto Login - run "gdmsetup" from a terminal and select a user to automatically login
- Sessions - make sure you don't save any previous X Windows sessions so that it doesn't prompt you for which one you want
- motion.conf - edit /etc/motion/motion.conf to use the settings you want (that is, video output directory, record only video, record in MPEG-4, set frame rate, etc). Do this with "sudo medit /etc/motion/motion.conf" at a prompt.
- Boot script - create a new script in /etc/rc2.d called "S65motion_client" and set permissions appropriately ("sudo chmod 777 /etc/rc2.d/S65motion_client"). Then edit the file so it contains the following lines:
#! /bin/sh /usr/bin/motion -c /etc/motion/motion.conf
This will now launch the motion client as root when you boot up.
Also note that unless your BeagleBoard can remember the time (battery backed up clock installed), the timestamps will not be correct until you update the time. If your BeagleBoard has an Internet connection this can be achieved using the ntpdate application.
Robotics
ROS
ROS (Robot Operating System) provides libraries and tools to help software developers create robot applications. It provides hardware abstraction, device drivers, libraries, visualizers, message-passing, package management, and more. ROS is licensed under an open source, BSD license.
There are currently builds of ROS for Ubuntu Trusty armhf. These builds include most but not all packages, and save a considerable amount of time compared to doing a full source-based installation:
http://wiki.ros.org/indigo/Installation/UbuntuARM
Alternatively ROS can be installed from source and is generally easy to do so (although slow).
For more information about ROS, see www.ros.org.