BeagleBoardUbuntu - Revision history

RobertCNelson: wording...

2013-05-20T15:27:33Z

wording...

RobertCNelson: /* Quantal 12.10 armhf */ ubuntu-12.10-console-armhf-2013-05-18

2013-05-20T15:25:05Z

‎Quantal 12.10 armhf: ubuntu-12.10-console-armhf-2013-05-18

RobertCNelson: /* Raring 13.04 armhf */ ubuntu-13.04-console-armhf-2013-05-18.tar.xz

2013-05-20T15:24:01Z

‎Raring 13.04 armhf: ubuntu-13.04-console-armhf-2013-05-18.tar.xz

RobertCNelson: /* Demo Image */ release the "black"

2013-04-26T20:03:37Z

‎Demo Image: release the "black"

RobertCNelson: make note about which images canocial supported..

2013-04-23T19:43:01Z

make note about which images canocial supported..

RobertCNelson at 18:29, 23 April 2013

2013-04-23T18:29:07Z

RobertCNelson: ubuntu-raring-console-armhf-2013-03-28.tar.xz

2013-03-29T16:27:57Z

ubuntu-raring-console-armhf-2013-03-28.tar.xz

RobertCNelson: /* Demo Image */ easer to pull in updates...

2013-03-29T16:02:28Z

‎Demo Image: easer to pull in updates...

RobertCNelson: ubuntu-12.10-console-armhf-2013-03-28.tar.xz

2013-03-29T16:01:37Z

ubuntu-12.10-console-armhf-2013-03-28.tar.xz

RobertCNelson: /* Method 3: Manual Install (no automatic scripts) */ this is always outdated, just link to my other 3 pages...

2013-02-28T13:48:18Z

‎Method 3: Manual Install (no automatic scripts): this is always outdated, just link to my other 3 pages...

Show changes

@@ Line 104: / Line 104: @@
 Services Active:
   Note: Depending on your internal network these may work out the box
-  Apache, Port 80: http://arm/ (Bone: or via usb) http://192.168.7.2
+  Apache, Port 80: http://arm/ (Bone: via usb) http://192.168.7.2
-  SSH, Port 22: ssh ubuntu@arm (Bone: or via usb) ubuntu@192.168.7.2
+  SSH, Port 22: ssh ubuntu@arm (Bone: via usb) ubuntu@192.168.7.2
-  shellinabox, Port 4200: https://arm:4200/ (Bone: or via usb) https://192.168.7.2:4200
+  shellinabox, Port 4200: https://arm:4200/ (Bone: via usb) https://192.168.7.2:4200
   Getty, Serial Port

@@ Line 211: / Line 211: @@
 Image Updated:
 *2013-04-26
 ** Beagle/Panda/Panda ES: v3.7.10-x10 kernel
@@ Line 218: / Line 222: @@
 ** Beagle/Panda/Panda ES: v3.7.10-x10 kernel
 ** Bone: v3.2.33-psp26 kernel (--uboot bone_dtb = v3.8.4-bone9)
 Get prebuilt image:
-  wget http://rcn-ee.net/deb/rootfs/quantal/ubuntu-12.10-console-armhf-2013-04-26.tar.xz
+  wget http://rcn-ee.net/deb/rootfs/quantal/ubuntu-12.10-console-armhf-2013-05-18.tar.xz
 Verify image with:
-  md5sum ubuntu-12.10-console-armhf-2013-04-26.tar.xz
+  md5sum ubuntu-12.10-console-armhf-2013-05-18.tar.xz
-  b7cd2f94c0dbc75f8d6897e559d52c0a  ubuntu-12.10-console-armhf-2013-04-26.tar.xz
+  feb3e41208dba6ec1593ac0b910cff3d  ubuntu-12.10-console-armhf-2013-05-18.tar.xz
 Unpack image:
-  tar xJf ubuntu-12.10-console-armhf-2013-04-26.tar.xz
+  tar xJf ubuntu-12.10-console-armhf-2013-05-18.tar.xz
-  cd ubuntu-12.10-console-armhf-2013-04-26
+  cd ubuntu-12.10-console-armhf-2013-05-18
 Then follow directions show above with the other images...

@@ Line 90: / Line 90: @@
 === Raring 13.04 armhf ===
 Image Updated:
 *2013-04-26
 ** Beagle/Panda/Panda ES: v3.7.10-x10 kernel
@@ Line 97: / Line 101: @@
 ** Beagle/Panda/Panda ES: v3.7.10-x10 kernel
 ** Bone: v3.2.33-psp26 kernel (--uboot bone_dtb = v3.8.4-bone9)
 Services Active:
   Note: Depending on your internal network these may work out the box
-  Apache, Port 80: http://arm/
+  Apache, Port 80: http://arm/ (Bone: or via usb) http://192.168.7.2
-  SSH, Port 22: ssh ubuntu@arm
+  SSH, Port 22: ssh ubuntu@arm (Bone: or via usb) ubuntu@192.168.7.2
   Getty, Serial Port
@@ Line 111: / Line 113: @@
 Get prebuilt image:
-  wget http://rcn-ee.net/deb/rootfs/raring/ubuntu-13.04-console-armhf-2013-04-26.tar.xz
+  wget http://rcn-ee.net/deb/rootfs/raring/ubuntu-13.04-console-armhf-2013-05-18.tar.xz
   mirrors (will take some time to update):
-  wget http://ynezz.ibawizard.net/beagleboard/raring/ubuntu-13.04-console-armhf-2013-04-26.tar.xz
+  wget http://ynezz.ibawizard.net/beagleboard/raring/ubuntu-13.04-console-armhf-2013-05-18.tar.xz
 Verify image with:
-  md5sum ubuntu-13.04-console-armhf-2013-04-26.tar.xz
+  md5sum ubuntu-13.04-console-armhf-2013-05-18.tar.xz
-  e54b8693cb92b40d694e5885e4a1b86c  ubuntu-13.04-console-armhf-2013-04-26.tar.xz
+c791b69ee4c6ddfd1ce4c9049ecf23e  ubuntu-13.04-console-armhf-2013-05-18.tar.xz
 Unpack image:
-  tar xJf ubuntu-13.04-console-armhf-2013-04-26.tar.xz
+  tar xJf ubuntu-13.04-console-armhf-2013-05-18.tar.xz
-  cd ubuntu-13.04-console-armhf-2013-04-26
+  cd ubuntu-13.04-console-armhf-2013-05-18
 If you don't know the location of your SD card:
@@ Line 202: / Line 204: @@
   git clone git://github.com/RobertCNelson/omap-image-builder.git
   cd omap-image-builder
-  git checkout v2013.04 -b v2013.04
+  git checkout v2013.05 -b v2013.05
   touch release
   ./build_image.sh

@@ Line 68: / Line 68: @@
 * These demonstration images contain a custom Mainline based kernel with experimental enhancements to the boards supported. They are usually updated about once a month, as new features/enhancements get added by the community. Currently, this image ships with two kernel's "x" which is for mainline omap3+ devices (BeagleBoard/PandaBoard) and the "psp" which is for specifically the BeagleBone, as much of the kernel support for this device is currently in a TI Git kernel tree on [http://arago-project.org arago-project]. The kernel is stress tested by a farm of Panda/Beagle's running 24/7 under a heavy load (building gcc trunk/mainline kernel).
-* '''Advanced Users only''': Beagle/Panda Kernel source, used in these demo images: https://github.com/RobertCNelson/stable-kernel
+* '''Advanced Users only''': Beagle/Panda: Kernel source, used in these demo images: https://github.com/RobertCNelson/stable-kernel
   git clone git://github.com/RobertCNelson/stable-kernel.git
   cd stable-kernel
   git checkout origin/v3.7.x -b tmp
   ./build_kernel.sh
-* '''Advanced Users only''': BeagleBone Kernel v3.2.x source, used in these demo images: https://github.com/RobertCNelson/linux-dev/tree/am33x-v3.2
+* '''Advanced Users only''': BeagleBone: Kernel v3.2.x source, used in these demo images: https://github.com/RobertCNelson/linux-dev/tree/am33x-v3.2
   git clone git://github.com/RobertCNelson/linux-dev.git
   cd linux-dev
   git checkout origin/am33x-v3.2 -b tmp
   ./build_kernel.sh
-* '''Advanced Users only''': BeagleBone Kernel v3.8.x source, used in these demo images: https://github.com/RobertCNelson/linux-dev/tree/am33x-v3.8
+* '''Advanced Users only''': BeagleBone/BeagleBone Black:  Kernel v3.8.x source, used in these demo images: https://github.com/RobertCNelson/linux-dev/tree/am33x-v3.8
   git clone git://github.com/RobertCNelson/linux-dev.git
   cd linux-dev
@@ Line 88: / Line 88: @@
 If the script in these demo images fail: email "bugs@rcn-ee.com" I need: terminal command, terminal log, distribution name, arch...
-=== Quantal 12.10 armhf ===
+=== Raring 13.04 armhf ===
-−
 Image Updated:
 *2013-03-28:
 ** Beagle/Panda/Panda ES: v3.7.10-x10 kernel
@@ Line 97: / Line 100: @@
 ** Beagle/Panda/Panda ES: v3.7.8-x8 kernel
 ** Bone: v3.2.33-psp26 kernel (--uboot bone_dtb = v3.8-rc7-bone4)
 Services Active:
@@ Line 111: / Line 111: @@
 Get prebuilt image:
-  wget http://rcn-ee.net/deb/rootfs/quantal/ubuntu-12.10-console-armhf-2013-03-28.tar.xz
+  wget http://rcn-ee.net/deb/rootfs/raring/ubuntu-13.04-console-armhf-2013-04-26.tar.xz
   mirrors (will take some time to update):
-  wget http://ynezz.ibawizard.net/beagleboard/quantal/ubuntu-12.10-console-armhf-2013-03-28.tar.xz
+  wget http://ynezz.ibawizard.net/beagleboard/raring/ubuntu-13.04-console-armhf-2013-04-26.tar.xz
 Verify image with:
-  md5sum ubuntu-12.10-console-armhf-2013-03-28.tar.xz
+  md5sum ubuntu-13.04-console-armhf-2013-04-26.tar.xz
-  d4ff7f524e78ce1f8847c5a9998fafc4  ubuntu-12.10-console-armhf-2013-03-28.tar.xz
+  e54b8693cb92b40d694e5885e4a1b86c  ubuntu-13.04-console-armhf-2013-04-26.tar.xz
 Unpack image:
-  tar xJf ubuntu-12.10-console-armhf-2013-03-28.tar.xz
+  tar xJf ubuntu-13.04-console-armhf-2013-04-26.tar.xz
-  cd ubuntu-12.10-console-armhf-2013-03-28
+  cd ubuntu-13.04-console-armhf-2013-04-26
 If you don't know the location of your SD card:
@@ Line 152: / Line 152: @@
 "board" options:
-*BeagleBoard Ax/Bx - beagle_bx
+*BeagleBoard Ax/Bx    - beagle_bx
-*BeagleBoard Cx/Dx - beagle_cx
+*BeagleBoard Cx/Dx    - beagle_cx
-*BeagleBoard xM    - beagle_xm
+*BeagleBoard xM       - beagle_xm
-*BeagleBone Ax     - bone
+*BeagleBone           - bone
-*BeagleBone Ax     - bone_dtb (testing v3.8.x based kernel)
+*BeagleBone/Black     - bone_dtb
-*PandaBoard Ax     - panda
+*PandaBoard Ax        - panda
-*PandaBoard ES     - panda_es
+*PandaBoard ES        - panda_es
 So for the BeagleBoard xM:
@@ Line 202: / Line 202: @@
   git clone git://github.com/RobertCNelson/omap-image-builder.git
   cd omap-image-builder
-  git checkout v2013.03 -b v2013.03
+  git checkout v2013.04 -b v2013.04
   touch release
   ./build_image.sh
-=== Raring 13.04 armhf (development snapshot) ===
+=== Quantal 12.10 armhf ===
 Image Updated:
 *2013-03-28:
 ** Beagle/Panda/Panda ES: v3.7.10-x10 kernel
@@ Line 214: / Line 219: @@
 ** Beagle/Panda/Panda ES: v3.7.8-x8 kernel
 ** Bone: v3.2.33-psp26 kernel (--uboot bone_dtb = v3.8-rc7-bone4)
 Get prebuilt image:
-  wget http://rcn-ee.net/deb/rootfs/raring/ubuntu-raring-console-armhf-2013-03-28.tar.xz
+  wget http://rcn-ee.net/deb/rootfs/quantal/ubuntu-12.10-console-armhf-2013-04-26.tar.xz
 Verify image with:
-  md5sum ubuntu-raring-console-armhf-2013-03-28.tar.xz
+  md5sum ubuntu-12.10-console-armhf-2013-04-26.tar.xz
-  e5c854859e7801ea3ca111282cd2be64  ubuntu-raring-console-armhf-2013-03-28.tar.xz
+  b7cd2f94c0dbc75f8d6897e559d52c0a  ubuntu-12.10-console-armhf-2013-04-26.tar.xz
 Unpack image:
-  tar xJf ubuntu-raring-console-armhf-2013-03-28.tar.xz
+  tar xJf ubuntu-12.10-console-armhf-2013-04-26.tar.xz
-  cd ubuntu-raring-console-armhf-2013-03-28
+  cd ubuntu-12.10-console-armhf-2013-04-26
 Then follow directions show above with the other images...

@@ Line 59: / Line 59: @@
 ''#ubuntu-arm'': Ubuntu's ARM IRC on Freenode ([http://irclogs.ubuntu.com/ logs] -> year -> month -> day -> #ubuntu-arm.html)
-Canonical only supports certain boards with images, at this moment.
+At one time, Canonical "supported" a few boards with their own images (11.10 & 12.04 releases).
 *BeagleBoard xM -> "omap"
 *PandaBoard & PandaBoard ES -> "omap4"

@@ Line 32: / Line 32: @@
 Mainline U-Boot:
-* All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
+* All old BeagleBoard (classic) Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
 * XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
 * Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]

@@ Line 73: / Line 73: @@
   git checkout origin/v3.7.x -b v3.7.x
   ./build_kernel.sh
-* '''Advanced Users only''': BeagleBone Kernel source, used in these demo images: https://github.com/RobertCNelson/linux-dev/tree/am33x-v3.2
+* '''Advanced Users only''': BeagleBone Kernel v3.2.x source, used in these demo images: https://github.com/RobertCNelson/linux-dev/tree/am33x-v3.2
   git clone git://github.com/RobertCNelson/linux-dev.git
   cd linux-dev
   git checkout origin/am33x-v3.2 -b am33x-v3.2
   ./build_kernel.sh
 * '''Advanced Users only''': Userspace, used in these demo images:
@@ Line 86: / Line 91: @@
 Image Updated:
 *2013-02-16:
 ** Beagle/Panda/Panda ES: v3.7.8-x8 kernel
@@ Line 96: / Line 104: @@
 ** Panda: v3.2.34-x15 kernel (kernel bug, crashes with v3.6.x after a few hours)
 ** Bone: v3.2.33-psp26 kernel (next release should be v3.7.x based)
 Services Active:
@@ Line 111: / Line 115: @@
 Get prebuilt image:
-  wget http://rcn-ee.net/deb/rootfs/quantal/ubuntu-12.10-console-armhf-2013-02-16.tar.xz
+  wget http://rcn-ee.net/deb/rootfs/quantal/ubuntu-12.10-console-armhf-2013-03-28.tar.xz
   mirrors (will take some time to update):
-  wget http://ynezz.ibawizard.net/beagleboard/quantal/ubuntu-12.10-console-armhf-2013-02-16.tar.xz
+  wget http://ynezz.ibawizard.net/beagleboard/quantal/ubuntu-12.10-console-armhf-2013-03-28.tar.xz
 Verify image with:
-  md5sum ubuntu-12.10-console-armhf-2013-02-16.tar.xz
+  md5sum ubuntu-12.10-console-armhf-2013-03-28.tar.xz
-  d452c17a9caff3db56d4d03083552f83  ubuntu-12.10-console-armhf-2013-02-16.tar.xz
+  d4ff7f524e78ce1f8847c5a9998fafc4  ubuntu-12.10-console-armhf-2013-03-28.tar.xz
 Unpack image:
-  tar xJf ubuntu-12.10-console-armhf-2013-02-16.tar.xz
+  tar xJf ubuntu-12.10-console-armhf-2013-03-28.tar.xz
-  cd ubuntu-12.10-console-armhf-2013-02-16
+  cd ubuntu-12.10-console-armhf-2013-03-28
 If you don't know the location of your SD card:
@@ Line 132: / Line 136: @@
   fdisk -l:
   Disk /dev/sda: 500.1 GB, 500107862016 bytes '''<- x86 Root Drive'''
-  Disk /dev/mmcblk0: 3957 MB, 3957325824 bytes '''<- MMC/SD card'''
+  Disk /dev/sdd: 3957 MB, 3957325824 bytes '''<- MMC/SD card'''
-  mount:
+  lsblk:
-  /dev/sda1 on / type ext4 (rw,errors=remount-ro,commit=0) '''<- x86 Root Partition'''
+  NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
-* In this example, we can see via mount, '''/dev/sda1''' is the x86 rootfs, therefore '''/dev/mmcblk0''' is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...
+* In this example, we can see via mount, '''/dev/sda1''' is the x86 rootfs, therefore '''/dev/sdd''' is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...
 Install image:
@@ Line 149: / Line 160: @@
 *BeagleBoard xM    - beagle_xm
 *BeagleBone Ax     - bone
-*BeagleBone Ax     - bone_dtb (testing v3.8-rc7 based kernel)
+*BeagleBone Ax     - bone_dtb (testing v3.8.x based kernel)
 *PandaBoard Ax     - panda
 *PandaBoard ES     - panda_es
@@ Line 195: / Line 206: @@
   git clone git://github.com/RobertCNelson/omap-image-builder.git
   cd omap-image-builder
-  git checkout v2013.02 -b v2013.02
+  git checkout v2013.03 -b v2013.03
   touch release
   ./build_image.sh