Difference between revisions of "BeagleBoard Zippy2"
(Created page with '200px == Hardware == The BeagleBuddy [http://www.tincantools.com/product.php?productid=16147&cat=249&page=1 Zippy] Ethernet Combo Board is an expansion b…') |
|||
Line 2: | Line 2: | ||
== Hardware == | == Hardware == | ||
− | The BeagleBuddy | + | The BeagleBuddy Zippy2 Ethernet Combo Board is an expansion board for the BeagleBoard that adds the following: |
* Battery Backed RTC | * Battery Backed RTC | ||
* Second MMC slot | * Second MMC slot | ||
Line 12: | Line 12: | ||
== Software == | == Software == | ||
− | |||
*Demo/Test Files | *Demo/Test Files | ||
**[[media:MLO-zippy.ift|MLO]] (save as MLO) | **[[media:MLO-zippy.ift|MLO]] (save as MLO) |
Revision as of 08:10, 4 February 2010
Hardware
The BeagleBuddy Zippy2 Ethernet Combo Board is an expansion board for the BeagleBoard that adds the following:
- Battery Backed RTC
- Second MMC slot
- 10BaseT Ethernet
- Second RS-232
- +5V level I2C
- AT24 EEPROM
Software
- Demo/Test Files
- MLO (save as MLO)
- u-boot.bin (save as u-boot.bin)
- uImage (save as uImage)
- Kernel Config
- place these files on your formated SD card per the instuctions at the LinuxBootDiskFormat page
- boot your BeagleBoard while holding down the "User" button.