Difference between revisions of "BeagleBoard Zippy2"
(→Software) |
|||
Line 13: | Line 13: | ||
*Demo/Test Files | *Demo/Test Files | ||
− | **[[media:MLO- | + | **[[media:MLO-zippy2.ift|MLO]] (save as MLO) |
− | **[[media:u-boot- | + | **[[media:u-boot-zippy2.bin|u-boot.bin]] (save as u-boot.bin) |
− | **[[media:uImage- | + | **[[media:uImage-zippy2.bin|uImage]] (save as uImage) |
− | **[[media: | + | **[[media:defconfig2.txt|Kernel Config]] |
*place these files on your formated SD card per the instuctions at the [http://code.google.com/p/beagleboard/wiki/LinuxBootDiskFormat LinuxBootDiskFormat] page | *place these files on your formated SD card per the instuctions at the [http://code.google.com/p/beagleboard/wiki/LinuxBootDiskFormat LinuxBootDiskFormat] page | ||
*boot your BeagleBoard while holding down the "User" button. | *boot your BeagleBoard while holding down the "User" button. |
Revision as of 08:10, 4 February 2010
Hardware
The BeagleBuddy Zippy2 Ethernet Combo Board is an expansion board for the BeagleBoard that adds the following:
- Battery Backed RTC
- Second MMC slot
- 10BaseT Ethernet
- Second RS-232
- +5V level I2C
- AT24 EEPROM
Software
- Demo/Test Files
- MLO (save as MLO)
- u-boot.bin (save as u-boot.bin)
- uImage (save as uImage)
- Kernel Config
- place these files on your formated SD card per the instuctions at the LinuxBootDiskFormat page
- boot your BeagleBoard while holding down the "User" button.