Difference between revisions of "BeagleBone PRU Notes"

From eLinux.org
Jump to: navigation, search
(Example Assembly)
m (Added |PRU so it will sort into the "P" section)
 
(8 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 +
[[Category:ECE497Notes |PRU]]
 +
[[Category:BeagleBone]]
 +
[[Category:ECE497]]
 +
[[Category:PRU]]
 +
 
The goal of this page is to record information that is pertinent to getting started with the BeagleBone's AM335x Programmable Real-time Unit (PRU).
 
The goal of this page is to record information that is pertinent to getting started with the BeagleBone's AM335x Programmable Real-time Unit (PRU).
  
Line 63: Line 68:
 
.word IRQ2handler
 
.word IRQ2handler
 
</pre>
 
</pre>
 +
 +
== Leads ==
 +
Here's some sources of information. 
 +
 +
* [http://www.element14.com/community/community/knode/single-board_computers/next-gen_beaglebone/blog/2013/05/22/bbb--working-with-the-pru-icssprussv2 BBB - Working with the PRU-ICSS/PRUSSv2]  Has very detailed instructions for working with the Black.  In Step 2, rather than searching for '''am335x_pru_package-master.zip''' just do a
 +
beagle$ '''git clone git@github.com:beagleboard/am335x_pru_package.git'''
 +
I had to
 +
beagle$ '''cd am335x_pru_package/pru_sw/utils'''
 +
beagle$ '''mv pasm pasm_2'''
 +
before I could '''make''' the examples.  Here's how you enable the PRU
 +
beagle$ '''echo BB-BONE-PRU-01 > $SLOTS'''
 +
 +
* [http://git.mah.priv.at/gitweb?p=emc2-dev.git;a=shortlog;h=refs/heads/arm335x-hal-pru-tasks Working PRU examples]
 +
*[http://sourceforge.net/projects/prudebug/ PRUdebug] ([http://e2e.ti.com/support/arm/sitara_arm/f/791/p/229812/937205.aspx#937205 discussion])

Latest revision as of 19:20, 19 February 2014


The goal of this page is to record information that is pertinent to getting started with the BeagleBone's AM335x Programmable Real-time Unit (PRU).

BeagleBone Programmable Real-time Unit

This is also called the PRU Subsystem (PRUSS) or PRU and Industrial Controller Subsystem (PRU-ICSS). It is optimized to perform embedded tasks that require real-time constraints.

Most important is the purssdrv library to expose functions to the PRU. You can load this library by typing modprobe uio_pruss.

PRU capabilities

AM335x PRUSS

  • The PRU has dual 32-bit RISC cores, shared data and instruction memories and an interrupt controller (INTC).
  • 8KB data memory and 8KB instruction memory
  • 12KB shared RAM
  • A small, deterministic instruction set

There is no pipelining done on the processor and there are 29 (r1-r30) registers to use.

Data Sheet is located at http://www.ti.com/lit/pdf/spruh73

Software examples

BeagleBoard/TI has provided example C programs that utilize the PRU on github.

These include: PRU_memAccess_DDR_PRUsharedRAM, PRU_memAccessPRUDataRam, PRU_PRUtoPRUInterrupt, and a PRU assembler.

Full assembly guide is located at http://processors.wiki.ti.com/index.php/PRU_Assembly_Reference_Guide

Instruction Set

Nearly all instructions (with exception of accessing memory external to PRU) are single-cycle execute (5 ns when running at 200 MHz)

Four instruction classes

  • Arithmetic
  • Logical
  • Flow Control
  • Register Load/Store

Instruction Syntax

  • Mnemonic, followed by comma separated parameter list
  • Parameters can be a register, label, immediate value, or constant table entry
  • Example
    • SUB r3, r3, 10
    • Subtracts immediate value 10 (decimal) from the value in r3 and then places the result in r3

Example Assembly

;INTC_SIR_IRQ/INTC_SIR_FIQ register address
INTC_SIR_IRQ_ADDR/INTC_SIR_FIQ_ADDR .word 0x48200040/0x48200044
; ACTIVEIRQ bit field mask to get only the bit field
ACTIVEIRQ_MASK .equ 0x7F
_IRQ_ISR/_FIQ_ISR:
; Save the critical context
STMFD SP!, {R0-R12, LR} ; Save working registers and the Link register
MRS R11, SPSR ; Save the SPSR into R11
; Get the number of the highest priority active IRQ/FIQ
LDR R10, INTC_SIR_IRQ_ADDR/INTC_SIR_FIQ_ADDR
LDR R10, [R10] ; Get the INTC_SIR_IRQ/INTC_SIR_FIQ register
AND R10, R10, #ACTIVEIRQ_MASK ; Apply the mask to get the active IRQ number
; Jump to relevant subroutine handler
LDR PC, [PC, R10, lsl #2] ; PC base address points this instruction + 8
NOP ; To index the table by the PC
; Table of handler start addresses
.word IRQ0handler ;For IRQ0 of BANK0
.word IRQ1handler
.word IRQ2handler

Leads

Here's some sources of information.

beagle$ git clone git@github.com:beagleboard/am335x_pru_package.git

I had to

beagle$ cd am335x_pru_package/pru_sw/utils
beagle$ mv pasm pasm_2

before I could make the examples. Here's how you enable the PRU

beagle$ echo BB-BONE-PRU-01 > $SLOTS