BeagleBone PRU Notes

Revision as of 04:04, 18 April 2013 by Richarsm (Talk | contribs)

Jump to: navigation, search

The goal of this page is to record information that is pertinent to getting started with the BeagleBone's AM335x Programmable Real-time Unit (PRU).

BeagleBone Programmable Real-time Unit

This is also called the PRU Subsystem (PRUSS) or PRU and Industrial Controller Subsystem (PRU-ICSS). It is optimized to perform embedded tasks that require real-time constraints.

Most important is the purssdrv library to expose functions to the PRU. You can load this library by typing modprobe uio_pruss.

PRU capabilities


  • The PRU has dual 32-bit RISC cores, shared data and instruction memories and an interrupt controller (INTC).
  • 8KB data memory and 8KB instruction memory
  • 12KB shared RAM
  • A small, deterministic instruction set

There is no pipelining done on the processor and there are 29 (r1-r30) registers to use.

Software examples

BeagleBoard/TI has provided example C programs that utilize the PRU on github.

These include: PRU_memAccess_DDR_PRUsharedRAM, PRU_memAccessPRUDataRam, PRU_PRUtoPRUInterrupt, and a PRU assembler.