Difference between revisions of "BeagleBone eeProto Cape"
Logicsupply (talk | contribs) |
Logicsupply (talk | contribs) (Added Note about VDD5V and SYS5V labels) |
||
Line 1: | Line 1: | ||
==Descriptions== | ==Descriptions== | ||
[[File:Cbb-eeproto-beaglebone-proto-cape-with-eeprom.jpg|border|right|link=|300px|BeagleBone Proto Cape]] | [[File:Cbb-eeproto-beaglebone-proto-cape-with-eeprom.jpg|border|right|link=|300px|BeagleBone Proto Cape]] | ||
− | The Logic Supply BeagleBone EEProto Cape provides an easy workspace for creating protoypes. Through-hole solderpoints are spaced at 2.54mm (0.1") pitch. It includes two 46 pin headers (soldering required) and provides convenient SOT23 SMD IC's breakouts. The GND, 3V, 5V, SYS5V and P8-P9 trace banks are all clearly marked on the PCB for easy identification. Prototype quickly with surface-mount EEProm pre-installed. Includes write-protect jumper and dip-switch for easy addressing. Has support for up to four capes Using available pass-through header pins.The Proto Cape works with both the original BeagleBone and the BeagleBone Black. | + | The Logic Supply BeagleBone EEProto Cape provides an easy workspace for creating protoypes. Through-hole solderpoints are spaced at 2.54mm (0.1") pitch. It includes two 46 pin headers (soldering required) and provides convenient SOT23 SMD IC's breakouts. The GND, 3V, 5V, SYS5V and P8-P9 trace banks are all clearly marked on the PCB for easy identification. NOTE: On the EEproto cape the BUS labelled SYS5V is connected to the external DC jack, and VDD5V is connected to the internal 5V. Prototype quickly with surface-mount EEProm pre-installed. Includes write-protect jumper and dip-switch for easy addressing. Has support for up to four capes Using available pass-through header pins.The Proto Cape works with both the original BeagleBone and the BeagleBone Black. |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
==Specifications== | ==Specifications== |
Revision as of 10:47, 11 June 2014
Contents
Descriptions
The Logic Supply BeagleBone EEProto Cape provides an easy workspace for creating protoypes. Through-hole solderpoints are spaced at 2.54mm (0.1") pitch. It includes two 46 pin headers (soldering required) and provides convenient SOT23 SMD IC's breakouts. The GND, 3V, 5V, SYS5V and P8-P9 trace banks are all clearly marked on the PCB for easy identification. NOTE: On the EEproto cape the BUS labelled SYS5V is connected to the external DC jack, and VDD5V is connected to the internal 5V. Prototype quickly with surface-mount EEProm pre-installed. Includes write-protect jumper and dip-switch for easy addressing. Has support for up to four capes Using available pass-through header pins.The Proto Cape works with both the original BeagleBone and the BeagleBone Black.
Specifications
Electrical Specifications
Header | 2x 46 pin |
SOT23 | dual 2x3 pads |
EEprom | 24LC256 |
Write Enable | jumper |
4 Addresses | DIP switch selectable |
Through-hole | solderpoints 0.1" spaced |
Mechanical Specifications
Size | 2.15" x 3.40" |
Layers | 2 |
PCB Thickness | .062" |
RoHS Compliant | Yes |
EEPROM
EEPROM Suport | No |
Board Name | BeagleBone Proto Cape |
Version | R01 |
Manufacturer | Logic Supply |
Part Number | CBB-EEProto |
Pins Used | 2 |
Documentations
Open Source | Yes |
System Reference Manual | No |
Schematics | EAGLE, PDF |
PCB Files | EAGLE |
Gerber Files | Yes |
Bills of Materials | Yes |
Vendors
Manufacturer's Link
For more information please visit LogicSupply
To go back to the cape list, please click BeagleBone Capes