Difference between revisions of "Beagleboard:BeagleBoard-X15"
(→BeagleBoard-X15 Description) |
(→BeagleBoard-X15 Description) |
||
Line 10: | Line 10: | ||
STATUS UPDATE: RELEASED TO BUILD. | STATUS UPDATE: RELEASED TO BUILD. | ||
− | 1. We expect B1 proto PCBs here in | + | 1. We expect B1 proto PCBs here in on 5/16/2016. FAB shop issues. We believe these are now corrected.<br> |
− | 2. 1 week for assembly | + | 2. 1 week for assembly 5/23/2016<br> |
− | 3. 1 week for test and bring up. | + | 3. 1 week for test and bring up. 6/6/2016 (will need some SW updates for a few changes on the board.<br> |
− | 4. 1 week for FCC/CE testing | + | 4. 1 week for FCC/CE testing 6/13/2016<br> |
− | 5. First | + | 5. First 900 boards shipping 2 weeks later if we pass FCC/CE. Was 500 but we have increased that. 6/27/2016<br> |
{|style="margin:left;" | {|style="margin:left;" |
Revision as of 09:06, 20 April 2016
This is the official BeagleBoard-X15 Support Page maintained and supported by BeagleBoard.org a non-profit 501(C) organization.
If you have any questions or issues with the content on this Wiki, contact Gerald Coley
Contents
BeagleBoard-X15 Description
The BeagleBoard-X15 is the newest member of the BeagleBoard family. Measuring 4" x 4.2", it is based on a Dual Core A15 processor running at 1.5GHZ and features 2GB of DDR3L Memory.
Below is a picture of the top side of the board
STATUS UPDATE: RELEASED TO BUILD.
1. We expect B1 proto PCBs here in on 5/16/2016. FAB shop issues. We believe these are now corrected.
2. 1 week for assembly 5/23/2016
3. 1 week for test and bring up. 6/6/2016 (will need some SW updates for a few changes on the board.
4. 1 week for FCC/CE testing 6/13/2016
5. First 900 boards shipping 2 weeks later if we pass FCC/CE. Was 500 but we have increased that. 6/27/2016
BeagleBoard-X15 Features
BeagleBoard-X15 Hardware Files
BeagleBoard-X15 Questions and Answers
Does this replace the BeagleBone Black?
No
What is the expected price?
MSRP is $239
How many general purpose I/O pins are there?
There are four connectors with 60 pins each with about 157 GPIO pins[1]. The connectors are high-speed surface-mount on the back side of the board and even include PCIe[2].
Will this be open hardware?
Yes, all BeagleBoard.org designs are released as open hardware, with source schematics and layout available for your modification. We choose devices that are available in single unit quantities from worldwide distributors and publish our bill of materials. Documentation for the devices are available without NDA at the time of product launch. Within the processor, there may be some undocumented features, but no closed-source blobs are required to be loaded to boot the devices and full control is turned over to the users.
Is the graphics engine software open source?
The TI Sitara device used on BeagleBoard-X15 utilizes Imagination Technologies' PowerVR SGX544 GPU[3]. The kernel components of the current solution are GPLv2 licensed. There is no open source support for the user space components of this GPU from Imagination, but the FSF has proposed a project to create an open driver[4].
Will I be able to program the C66x DSPs?
Yes, there is a free C/C++ compiler from Texas Instruments and support in the mainline of the open source GCC C/C++ compiler. Support for interprocessor communication is also included in the mainline Linux kernel via RPMSG[5] [6] [7] .
bb.org: debian wheezy/jessie images: sudo apt-get install ti-c6000-cgt-v8.0.x-installer
Debug dsptop[8] Support
bb.org: needs linux kernel: 4.1.10-ti-r23/4.1.10-ti-rt-r23 or greater from the v4.1.x-ti branch sudo apt-get install dsptop
TI OpenCL[9] Support
bb.org: needs linux kernel: 4.1.10-ti-r23/4.1.10-ti-rt-r23 or greater from the v4.1.x-ti branch sudo apt-get install firmware-am57xx-opencl-monitor ti-opencl examples under: /usr/share/ti/examples/opencl/
BeagleBoard-X15 Mainline Support
U-Boot
As of v2015.01-rc3, mainline u-boot supports the x15 : http://git.denx.de/?p=u-boot.git;a=commit;h=1e4ad74b875f4da91193afffb0bb0db90ec7b886 However for the being use the ti fork:
git clone git://git.ti.com/ti-u-boot/ti-u-boot.git cd ti-u-boot/ git checkout origin/ti-u-boot-2015.07 -b tmp make ARCH=arm CROSS_COMPILE=${CC} distclean make ARCH=arm CROSS_COMPILE=${CC} beagle_x15_defconfig make ARCH=arm CROSS_COMPILE=${CC}
Kernel
Hardware Enabled | Kernel Version | Commit |
---|---|---|
Initial Support | 3.19-rc1 | 5a0f93c6576a83d8d07c1b569641934294439ac0 |
Dual Ethernet | 3.20-rc1 | a75dacf8204a8ace6d42a28a157af3cc65ed3ddc |
GPIO Fan Control (1) | 3.20-rc1 | 7a03f2c08d62371a6459331036e214bd7288ed10 |
USB Client (USB2) | 3.20-rc1 | f60db98eaa67e02915f01e11933501127bc004b0 |
726806ad9ba10f8ba8d26ba8154d98a7c9b89a12 | ||
HDMI | Example | Example |
Audio | Example | Example |
1: kernel: CONFIG_SENSORS_TMP102 & CONFIG_SENSORS_GPIO_FAN
echo enabled > /sys/class/thermal/thermal_zone0/mode
BeagleBoard-X15 Firmware
dra7-ipu2-fw.xem4
This firmware was found in the meta-ti tree: http://arago-project.org/git/meta-ti.git?p=meta-ti.git;a=tree;f=recipes-bsp/ipumm-fw
bb.org: debian wheezy/jessie images: sudo apt-get install ipumm-dra7xx-installer