Difference between revisions of "Beagleboard:Capes 3.8 to 3.14"
m (→Capes) |
m |
||
(15 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
+ | = Kernel = | ||
+ | https://github.com/beagleboard/linux | ||
+ | |||
= Capes = | = Capes = | ||
Latest 3.14 to support all: | Latest 3.14 to support all: | ||
sudo apt-get update | sudo apt-get update | ||
− | sudo apt-get install linux-image-3.14. | + | sudo apt-get install linux-image-3.14.19-ti-r30 |
== crypto == | == crypto == | ||
Line 27: | Line 30: | ||
=== 4dcape-43 === | === 4dcape-43 === | ||
− | dtb= | + | dtb=<device>-4dcape-43.dtb |
screen [x] | screen [x] | ||
backlight (gpio) [x] | backlight (gpio) [x] | ||
Line 35: | Line 38: | ||
=== 4dcape-43t === | === 4dcape-43t === | ||
− | dtb= | + | dtb=<device>-4dcape-43t.dtb |
screen [x] | screen [x] | ||
backlight (gpio) [x] | backlight (gpio) [x] | ||
Line 42: | Line 45: | ||
buttons [x] | buttons [x] | ||
led [x] | led [x] | ||
+ | |||
+ | === bb-view-43 === | ||
+ | dtb=<device>-bb-view-43.dtb | ||
+ | screen [x] (need to fix the red <-> blue) | ||
+ | backlight (gpio) [x] | ||
+ | backlight (pwm) [ ] | ||
+ | touchscreen (4wire) [x] | ||
+ | buttons [X] | ||
+ | led [X] | ||
=== lcd4-01-00a1 === | === lcd4-01-00a1 === | ||
Line 55: | Line 67: | ||
=== 4dcape-70 === | === 4dcape-70 === | ||
− | dtb= | + | dtb=<device>-4dcape-70.dtb |
screen [x] | screen [x] | ||
backlight (gpio) [x] | backlight (gpio) [x] | ||
Line 63: | Line 75: | ||
=== 4dcape-70t === | === 4dcape-70t === | ||
− | dtb= | + | dtb=<device>-4dcape-70t.dtb |
screen [x] | screen [x] | ||
backlight (gpio) [x] | backlight (gpio) [x] | ||
backlight (pwm) [ ] | backlight (pwm) [ ] | ||
touchscreen (4wire) [x] | touchscreen (4wire) [x] | ||
+ | buttons [x] | ||
+ | led [x] | ||
+ | |||
+ | === Chipsee bbb-exp-c === | ||
+ | Make sure xorg is in 24 bit mode: | ||
+ | sudo sed -i -e 's:16:24:g' /etc/X11/xorg.conf | ||
+ | |||
+ | dtb=<device>-bbb-exp-c.dtb | ||
+ | screen [x] | ||
+ | backlight (gpio) [x] | ||
+ | backlight (pwm) [ ] | ||
+ | touchscreen (capactive touch) [x] (the startup calibrator script doesn't always pick it up on startup) | ||
buttons [x] | buttons [x] | ||
led [x] | led [x] | ||
Line 118: | Line 142: | ||
make | make | ||
− | Install *.dtb: | + | Install *.dtb to: /boot/dtbs/`uname -r`/*.dtb |
sudo make install | sudo make install | ||
+ | |||
+ | = External Kernel Modules = | ||
+ | |||
+ | == mt7601u == | ||
+ | First: 3.14.19-ti-r25 | ||
+ | sudo apt-get install mt7601u-modules-`uname -r` | ||
+ | sudo depmod -a `uname -r` | ||
+ | sudo update-initramfs -uk `uname -r` | ||
+ | |||
+ | == sgx == | ||
+ | First: 3.14.19-ti-r26 | ||
+ | sudo apt-get install ti-sgx-es8-modules-`uname -r` | ||
+ | sudo depmod -a `uname -r` | ||
+ | sudo update-initramfs -uk `uname -r` |
Revision as of 17:18, 14 October 2014
Kernel
https://github.com/beagleboard/linux
Capes
Latest 3.14 to support all:
sudo apt-get update sudo apt-get install linux-image-3.14.19-ti-r30
crypto
http://elinux.org/Cryptotronix:CryptoCape
dtb=<device>-crypto-00a0.dtb rtc [x] atmel_tpm [x] atmega_uart4 [x] atmega_gpio1_13_gpio1_17 [ ]
lcd3
lcd3-01-00a2
dtb=<device>-lcd4-01-00a2.dtb screen [x] backlight (gpio) [x] backlight (pwm) [ ] touchscreen (4wire) [x] buttons [X] led [X]
lcd4
4dcape-43
dtb=<device>-4dcape-43.dtb screen [x] backlight (gpio) [x] backlight (pwm) [ ] buttons [x] led [x]
4dcape-43t
dtb=<device>-4dcape-43t.dtb screen [x] backlight (gpio) [x] backlight (pwm) [ ] touchscreen (4wire) [x] buttons [x] led [x]
bb-view-43
dtb=<device>-bb-view-43.dtb screen [x] (need to fix the red <-> blue) backlight (gpio) [x] backlight (pwm) [ ] touchscreen (4wire) [x] buttons [X] led [X]
lcd4-01-00a1
dtb=<device>-lcd4-01-00a1.dtb screen [x] backlight (gpio) [x] backlight (pwm) [ ] touchscreen (4wire) [x] buttons [X] led [X]
lcd7
4dcape-70
dtb=<device>-4dcape-70.dtb screen [x] backlight (gpio) [x] backlight (pwm) [ ] buttons [x] led [x]
4dcape-70t
dtb=<device>-4dcape-70t.dtb screen [x] backlight (gpio) [x] backlight (pwm) [ ] touchscreen (4wire) [x] buttons [x] led [x]
Chipsee bbb-exp-c
Make sure xorg is in 24 bit mode:
sudo sed -i -e 's:16:24:g' /etc/X11/xorg.conf
dtb=<device>-bbb-exp-c.dtb screen [x] backlight (gpio) [x] backlight (pwm) [ ] touchscreen (capactive touch) [x] (the startup calibrator script doesn't always pick it up on startup) buttons [x] led [x]
lcd7-01-00a2
untested: (no hardware)
dtb=<device>-lcd7-01-00a2.dtb screen [x] backlight (gpio) [x] backlight (pwm) [ ] touchscreen (4wire) [x] buttons [x] led [x]
lcd7-01-00a3
dtb=<device>-lcd7-01-00a3.dtb screen [x] backlight (gpio) [x] backlight (pwm) [ ] touchscreen (4wire) [x] buttons [x] led [x]
rtc
http://elinux.org/CircuitCo:RTC_Cape
dtb=<device>-rtc-01-00a1.dtb rtc [x] gpio_wakup [x] - untested
Custom dtb
By default, u-boot will load a *.dtb based on what board it is:
BeagleBone White: am335x-bone.dtb BeagleBone Black: am335x-boneblack.dtb
Unless it's overwritten by a variable [dtb=] in uEnv.txt. For example, u-boot would load the pre-built 4dcape43t, instead of the default am335x-boneblack.dtb if it was passed:
dtb=am335x-boneblack-4dcape-43t.dtb
Clone dtb-rebuilder
git clone -b 3.14-ti https://github.com/RobertCNelson/dtb-rebuilder.git cd dtb-rebuilder/
BeagleBone White:
./src/arm/am335x-bone.dts
BeagleBone Black:
./src/arm/am335x-boneblack.dts
Build *.dtb:
make
Install *.dtb to: /boot/dtbs/`uname -r`/*.dtb
sudo make install
External Kernel Modules
mt7601u
First: 3.14.19-ti-r25
sudo apt-get install mt7601u-modules-`uname -r` sudo depmod -a `uname -r` sudo update-initramfs -uk `uname -r`
sgx
First: 3.14.19-ti-r26
sudo apt-get install ti-sgx-es8-modules-`uname -r` sudo depmod -a `uname -r` sudo update-initramfs -uk `uname -r`