Boot Time

From eLinux.org
Revision as of 19:08, 17 June 2008 by Tim Bird (Talk | contribs)

Jump to: navigation, search

Boot Time includes topics such as Boot Time measurement, Boot Time reduction, and Boot Time analysis. Boot Time directly impacts the first perception an end user has of a consumer electronic product. Regardless of how attractive or well designed a consumer electronic device is, the time required to move the device from off to an interactive, usable state is critical to obtaining a positive end user experience. Turning on a device is Use Case #1.

Technology/Project Pages

The following are individual pages with information about various technologies relevant to improving Boot Time for Linux. Some of these describe local patches available on this site. Others point to projects or patches maintained elsewhere.

Measuring Boot-up Time

  • Printk Times - simple system for showing timing information for each printk.
  • Kernel Function Trace - system for reporting function timings in the kernel.
  • Linux Trace Toolkit - system for reporting timing data for certain kernel and process events.
  • Oprofile - system-wide profiler for Linux.
  • Bootchart - a tool for performance analysis and visualization of the Linux boot process. Resource utilization and process information are collected during the user-space portion of the boot process and are later rendered in a PNG, SVG or EPS encoded chart.
  • Bootprobe - a set of System Tap scripts for analyzing system bootup.
  • and, let us not forget: "cat /proc/uptime"

Technologies and Techniques for Reducing Boot Time

Bootloader speedups

Kernel speedups

  • Disable Console - Avoid overhead of console output during system startup.
  • RTC No Sync - Avoid delay to synchronize system time with RTC clock edge on startup.
  • Short IDE Delays - Reduce duration of IDE startup delays (this is effective but possibly dangerous).
  • Hardcode kernel module info - Reduce the overhead of loading a module, by hardcoding some information used for loading the relocation information
  • IDE No Probe - Force kernel to observe the ide<x>=noprobe option.
  • Preset LPJ - Allow the use of a preset loops_per_jiffy value.
  • Threaded Device Probing - Allow drivers to probe devices in parallel.

User-space and application speedups

Information

Articles

Case Studies

Additional Projects/Mailing Lists/Resources

Kexec

  • Kexec is a system which allows a system to be rebooted without going through BIOS. That is, a Linux kernel can directly boot into another Linux kernel, without going through firmware. See the white paper at: kexec.pdf

Others

  • bootspash.org - technology to put up a splash screen early in boot sequence
  • Gentoo Splashscreen - newer technology to put a splash screen early in the boot sequence
  • PSplash - PSplash is a userspace graphical boot splash screen for mainly

embedded Linux devices supporting a 16bpp or 32bpp framebuffer.

  • FSMLabs Fastboot - press release by FSMLabs about fast booting of their product. Is any of this published?
  • snapshot boot - a technology uses software resume to boot up the system quickly.