Difference between revisions of "CAN Bus"

From eLinux.org
Jump to: navigation, search
(SocketCAN Tutorials: add "Bringing CAN interface up" tutorial)
(33 intermediate revisions by 8 users not shown)
Line 9: Line 9:
 
Decreasing the bit rate allows longer network distances (e.g., 500 m at 125 kbit/s).
 
Decreasing the bit rate allows longer network distances (e.g., 500 m at 125 kbit/s).
 
(Jeremiah J. Flerchinger [[media:avc-lan.pdf|Source]])
 
(Jeremiah J. Flerchinger [[media:avc-lan.pdf|Source]])
 +
Controllers supporting CAN FD, an enhanced CAN version with frames up to 64 byte and bit rates up to 4 Mbit/s,
 +
will be available in the second half of 2014. A can4linux version supportig CAN FD on a [http://www.ifi-pld.de/IP/CANFD/canfd.html IFI CAN] is ready to be used.
  
 
Although developed as car communication network CAN is used in many other areas, industrial, medical, maritime laboratory and more.
 
Although developed as car communication network CAN is used in many other areas, industrial, medical, maritime laboratory and more.
Most often with a CAN based higher layer protocol like [[CANopen]] on top of it.
+
Most often with a CAN based higher layer protocol like [http://en.wikipedia.org/wiki/CANopen CANopen] on top of it.
 +
 
  
 
Additional information can be found at:
 
Additional information can be found at:
Line 21: Line 24:
 
:CiA [http://www.can-cia.org CAN in Automation] CAN user association
 
:CiA [http://www.can-cia.org CAN in Automation] CAN user association
 
:[http://www.can-wiki.info CAN Wiki]
 
:[http://www.can-wiki.info CAN Wiki]
 
+
:[http://www.bosch-semiconductors.de/media/pdf_1/canliteratur/can_fd_spec.pdf CAN FD Specification Version 1.0]
 
=== CAN Support in Linux ===
 
=== CAN Support in Linux ===
  
Line 28: Line 31:
 
* [http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=blob_plain;f=Documentation/networking/can.txt SocketCAN Documentation]
 
* [http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=blob_plain;f=Documentation/networking/can.txt SocketCAN Documentation]
 
* [http://vger.kernel.org/vger-lists.html#linux-can  mailing list for Linux Kernel CAN development]
 
* [http://vger.kernel.org/vger-lists.html#linux-can  mailing list for Linux Kernel CAN development]
* [http://gitorious.org/linux-can linux-can git repository]
+
* [https://git.kernel.org/cgit/linux/kernel/git/mkl/linux-can.git linux-can git repository]
 +
* [https://git.kernel.org/cgit/linux/kernel/git/mkl/linux-can-next.git linux-can-next git repository]
 
* [http://developer.berlios.de/projects/socketcan/ Berlios Project Page (obsolete)]
 
* [http://developer.berlios.de/projects/socketcan/ Berlios Project Page (obsolete)]
  
Line 53: Line 57:
 
* TIs SoCs
 
* TIs SoCs
 
* Serial/network devices utilizing ASCII protocol (slcan driver)
 
* Serial/network devices utilizing ASCII protocol (slcan driver)
 +
 +
{| class="wikitable sortable"
 +
|-
 +
!Vendor !! Device Name !! Driver Module Name !! Controller !! Kconfig Option !! Linux Mainline !! Remarks
 +
|-
 +
|[http://vscom.de VScom] || [http://vscom.de/1_1_05_3.htm NET-CAN] || slcan || (unknown) || CONFIG_CAN_SLCAN || 2.6.38 || needs slcand and socat
 +
|-
 +
|[http://vscom.de VScom] || [http://vscom.de/1_1_05_4.htm PCI-2CAN] || slcan || (unknown) || CONFIG_CAN_SLCAN || 2.6.38 || needs slcand
 +
|-
 +
|[http://vscom.de VScom] || [http://vscom.de/1_1_05_1.htm SER-CAN] || slcan || (unknown) || CONFIG_CAN_SLCAN || 2.6.38 || needs slcand
 +
|-
 +
|[http://vscom.de VScom] || [http://vscom.de/1_1_05_2.htm USB-CAN] || slcan || SJA1000T || CONFIG_CAN_SLCAN || 2.6.38 || needs slcand
 +
|-
 +
|[http://www.lawicel-shop.se LAWICEL] || [http://www.can232.com/?page_id=14 CAN232] || slcan || (unknown)  || CONFIG_CAN_SLCAN || 2.6.38 || needs slcand
 +
|-
 +
|[http://www.lawicel-shop.se‎ LAWICEL] || [http://www.can232.com/?page_id=16 CANUSB] || slcan || (unknown)  || CONFIG_CAN_SLCAN || 2.6.38 || needs slcand
 +
|-
 +
|[http://www.peak-system.com PEAK] || [http://www.peak-system.com/PCAN-PCI.207.0.html PCAN-PCI] || peak_pci || sja1000 || CONFIG_CAN_PEAK_PCI || 3.2 || supports all PCAN-[mini]PCI[e][104] variants
 +
|-
 +
|[http://www.peak-system.com PEAK] || [http://www.peak-system.com/PCAN-USB.199.0.html PCAN-USB] || peak_usb || (unknown) || CONFIG_CAN_PEAK_USB || 3.4 || supports PCAN-USB[pro][hub] (no LIN support)
 +
|-
 +
|[http://www.kvaser.com/ Kvaser] || [http://www.kvaser.com/products-services/our-products/#?interfaces=mini-pci-express,pci104,pci,pci-express PCIcanx] || kvaser_pci || sja1000 || CONFIG_CAN_KVASER_PCI || 2.6.31 || supports all PCI-[mini]PCI[e][104] variants
 +
|-
 +
|[http://www.kvaser.com/ Kvaser] || [http://www.kvaser.com/products-services/our-products/#?interfaces=usb Leaf] || kvaser_usb || (unknown) || CONFIG_CAN_KVASER_USB || 3.8 || supports USB Leaf / Memorator / Blackbird / R (see detailed USB device IDs in kvaser_usb.c)
 +
|-
 +
|[http://www.kvaser.com/ Kvaser] || [http://www.kvaser.com/products-services/our-products/#?interfaces=usb USBCan-II] || kvaser_usb || (unknown) || CONFIG_CAN_KVASER_USB || [http://thread.gmane.org/gmane.linux.can/7570 commits pulled-in for the 3.20 release] || supports:
 +
* Kvaser USBCan-II HS/LS
 +
* Kvaser USBCan-II HS/HS
 +
* Kvaser USBcan Rugged ("USBcan Rev B")
 +
* Kvaser Memorator HS/LS
 +
* Kvaser Memorator HS/HS
 +
* Scania VCI2 (if you have the Kvaser logo on top)
 +
|-
 +
|[http://www.ems-wuensche.com EMS Wünsche] || [http://www.ems-wuensche.com/product/datasheet/html/can-pccard-laptop-notebook-adapter-cpccard.html CPC-Card] || ems_pcmcia || sja1000 || CONFIG_CAN_EMS_PCMCIA || 3.2 || discontinued
 +
 +
|-
 +
|[http://www.ems-wuensche.com EMS Wünsche] || [http://www.ems-wuensche.com/product/datasheet/html/can-usb-adapter-converter-interface-cpcusb.html CPC-USB/ARM7] || ems_usb || (unknown) || CONFIG_CAN_EMS_USB || 3.2 ||
 +
 +
|-
 +
|[http://www.ems-wuensche.com EMS Wünsche] || [http://www.ems-wuensche.com/product/datasheet/html/can-pci-plugincard-multiple-channels-cpcpci.html CPC-PCI/PCIe] || ems_pci || sja1000 || CONFIG_CAN_EMS_PCI || 3.2 || up to four channel
 +
 +
|-
 +
|[http://www.ems-wuensche.com EMS Wünsche] || [http://www.ems-wuensche.com/product/datasheet/html/can-pci-104-passive-plugincard-cpc104p.html CPC-PC104P] || ems_pci || sja1000 || CONFIG_CAN_EMS_PCI || 3.2 || up to four channel on a PC104+ board
 +
 +
|-
 +
|[http://8devices.com 8devices] || [http://8devices.com/usb2can USB2CAN] || usb_8dev || (STR750FV2) || CONFIG_CAN_8DEV_USB || 3.9 || [https://github.com/krumboeck/usb2can STR750FV2 Firmware]
 +
 +
|-
 +
|[http://www.softing.com Softing] || [http://automotive.softing.com/en/products/communication-interfaces-can.html CANcard2] || softing_cs || sja1000 or NEC-005(?) || CONFIG_CAN_SOFTING_CS || 2.6.38 || Supports {CAN,EDIC}card{,SJA,2} PCMCIA cards
 +
Needs firmware [http://www.gitorious.org/linux-can/can-misc softing-fw-4.6-binaries.tar.gz]
 +
|}
  
 
==== SocketCAN Support in Programming Languages/Environments ====
 
==== SocketCAN Support in Programming Languages/Environments ====
Line 58: Line 113:
 
* [[Java]]
 
* [[Java]]
 
* [[Python_Can | Python]]
 
* [[Python_Can | Python]]
 +
* [https://github.com/rscada/libcanopen/ Python library for CAN]
 +
* [http://lintarget.sourceforge.net/can_bus/index.html Matlab/Simulink blocks to send and receive CAN messages]
  
 
==== can4linux Supported Controllers ====
 
==== can4linux Supported Controllers ====
  
 +
* [http://linux-sunxi.org/A20 Allwinner A20] with integrated CAN (on the popular [http://www.lemaker.org/ BananaPi] single-board computer.)
 
* Analog Devices BlackFin BF537
 
* Analog Devices BlackFin BF537
 
* Atmel AT91 SoCs
 
* Atmel AT91 SoCs
* Freescale FlexCAN (ColdFire 5282, i.MX25, i.MX28, i.MX35)
+
* [http://www.freescale.com/ Freescale] FlexCAN (ColdFire 5282, i.MX25, i.MX28, i.MX35)
 +
* Intel 82527 (the replacement Bosch CC770 should work)
 
* Microchip Stand Alone CAN MCP2515
 
* Microchip Stand Alone CAN MCP2515
* NXP Stand Alone CAN SJA1000 (on different ISA or PCI/PCIe boards)
+
* NXP Stand Alone CAN [http://www.nxp.com/documents/data_sheet/SJA1000.pdf SJA1000] (on different ISA or PCI/PCIe boards)
* Xilinx Zynq with XCAN
+
* [http://www.xilinx.com/products/intellectual-property/DO-DI-CAN.htm Xilinx] Zynq with XCAN
 
* 'virtual' CAN mode without CAN hardware
 
* 'virtual' CAN mode without CAN hardware
 +
* 'virtual' CAN mode supporting [http://www.can-wiki.info/doku.php?id=can_fd CAN FD]
 +
* [http://www.ifi-pld.de/IP/CANFD/canfd.html IFI CAN] FPGA IP, in classic CAN mode and CAN FD mode
  
 
==== can4linux Support in Programming Languages/Environments ====
 
==== can4linux Support in Programming Languages/Environments ====
* [[Tcl/Tk]]
+
* C - many examples and useful applications are provided with the package, check can4linux-examples/
* [[Python]]
+
* [[Tcl/Tk]] also in can4linux-examples/
 +
* [[Python]] also in can4linux-examples/
 +
 
 +
==== CAN Controllers Emulation (WIP/experimental) ====
 +
* SJA1000 CAN controller based PCI board emulation for QEMU
 +
** Cards models provided:
 +
*** Simple memory mapped SJA1000 in the first PCI BAR with ad-hoc PCI ID
 +
*** Kvaser PCIcan-S single I/O mapped SJA1000 model compatible with kvaser_pci Linux driver on guest side
 +
*** Advantech PCM-3680i PCI CAN (dual SJA1000 channel)
 +
** The emulated CAN buses can be connected to virtual or physical SocketCAN interface if Linux is used as host system
 +
** Project repository: [https://github.com/CTU-IIG/qemu https://github.com/CTU-IIG/qemu] branch [https://github.com/CTU-IIG/qemu/tree/can-pci can-pci]
 +
** Work started by 2013 GSoC project when RTEMS project donated its slot to work on QEMU CAN support - see [https://devel.rtems.org/wiki/Developer/Simulators/QEMU/CANEmulation RTEMS related page] for more info and use instructions
 +
** Some instructions and RTLWS article can be found at https://rtime.felk.cvut.cz/can/can-qemu/
 +
 
 +
==== SocketCAN Bechmarking ====
 +
* [http://rtime.felk.cvut.cz/can/benchmark/3.0/ CAN gateway timing analysis] and [http://rtime.felk.cvut.cz/gitweb/can-benchmark.git repository with benchmark infrastructure]
  
 
==== SocketCAN Tutorials ====
 
==== SocketCAN Tutorials ====
Line 80: Line 156:
  
 
[[Category:Networking]]
 
[[Category:Networking]]
 +
[[Category:Automotive]]

Revision as of 00:34, 11 May 2016

Overview

The CAN bus is an ISO standard bus originally developed for vehicles. It manages the Chassis Electrical System Control and is responsible for critical activities like engine electrical, and skid control. This system is also used to provide vehicle diagnostic information for maintenance. A multi-star configuration seems typical of this bus with a primary bus line that branches into sub bus lines at its extremities then attaches to multiple device nodes. Differential voltage is applied over twisted pair at 1.5 to 2.5V and 2.5 to 3.5V for noise resistant signaling. Bit rates up to 1 Mbit/s are possible at network lengths below 40 m. Decreasing the bit rate allows longer network distances (e.g., 500 m at 125 kbit/s). (Jeremiah J. Flerchinger Source) Controllers supporting CAN FD, an enhanced CAN version with frames up to 64 byte and bit rates up to 4 Mbit/s, will be available in the second half of 2014. A can4linux version supportig CAN FD on a IFI CAN is ready to be used.

Although developed as car communication network CAN is used in many other areas, industrial, medical, maritime laboratory and more. Most often with a CAN based higher layer protocol like CANopen on top of it.


Additional information can be found at:

http://en.wikipedia.org/wiki/CAN_bus
SocketCAN News
CiA CAN in Automation CAN user association
CAN Wiki
CAN FD Specification Version 1.0

CAN Support in Linux

CAN is supported by Linux device drivers. Mainly two types exist. Character device based drivers and network socket based drivers. The Linux kernel supports CAN with the SocketCAN framework.

One of the character based drivers is can4linux.

SocketCAN Supported Protocols

  • RAW: send & receive raw CAN frames
  • BCM: Broadcast manager, offload repetitive work to the Linux kernel
  • ISOTP ...
  • SAE J1939

SocketCAN Supported Controllers

  • Microchip MCP251x
  • Atmel AT91 SoCs
  • ESD 331 CAN Cards
  • NXP (Philips) SJA1000
  • Freescale MPC52xx SoCs
  • Bosch CC770
  • Intel AN82527
  • TIs SoCs
  • Serial/network devices utilizing ASCII protocol (slcan driver)
Vendor Device Name Driver Module Name Controller Kconfig Option Linux Mainline Remarks
VScom NET-CAN slcan (unknown) CONFIG_CAN_SLCAN 2.6.38 needs slcand and socat
VScom PCI-2CAN slcan (unknown) CONFIG_CAN_SLCAN 2.6.38 needs slcand
VScom SER-CAN slcan (unknown) CONFIG_CAN_SLCAN 2.6.38 needs slcand
VScom USB-CAN slcan SJA1000T CONFIG_CAN_SLCAN 2.6.38 needs slcand
LAWICEL CAN232 slcan (unknown) CONFIG_CAN_SLCAN 2.6.38 needs slcand
LAWICEL CANUSB slcan (unknown) CONFIG_CAN_SLCAN 2.6.38 needs slcand
PEAK PCAN-PCI peak_pci sja1000 CONFIG_CAN_PEAK_PCI 3.2 supports all PCAN-[mini]PCI[e][104] variants
PEAK PCAN-USB peak_usb (unknown) CONFIG_CAN_PEAK_USB 3.4 supports PCAN-USB[pro][hub] (no LIN support)
Kvaser PCIcanx kvaser_pci sja1000 CONFIG_CAN_KVASER_PCI 2.6.31 supports all PCI-[mini]PCI[e][104] variants
Kvaser Leaf kvaser_usb (unknown) CONFIG_CAN_KVASER_USB 3.8 supports USB Leaf / Memorator / Blackbird / R (see detailed USB device IDs in kvaser_usb.c)
Kvaser USBCan-II kvaser_usb (unknown) CONFIG_CAN_KVASER_USB commits pulled-in for the 3.20 release supports:
  • Kvaser USBCan-II HS/LS
  • Kvaser USBCan-II HS/HS
  • Kvaser USBcan Rugged ("USBcan Rev B")
  • Kvaser Memorator HS/LS
  • Kvaser Memorator HS/HS
  • Scania VCI2 (if you have the Kvaser logo on top)
EMS Wünsche CPC-Card ems_pcmcia sja1000 CONFIG_CAN_EMS_PCMCIA 3.2 discontinued
EMS Wünsche CPC-USB/ARM7 ems_usb (unknown) CONFIG_CAN_EMS_USB 3.2
EMS Wünsche CPC-PCI/PCIe ems_pci sja1000 CONFIG_CAN_EMS_PCI 3.2 up to four channel
EMS Wünsche CPC-PC104P ems_pci sja1000 CONFIG_CAN_EMS_PCI 3.2 up to four channel on a PC104+ board
8devices USB2CAN usb_8dev (STR750FV2) CONFIG_CAN_8DEV_USB 3.9 STR750FV2 Firmware
Softing CANcard2 softing_cs sja1000 or NEC-005(?) CONFIG_CAN_SOFTING_CS 2.6.38 Supports {CAN,EDIC}card{,SJA,2} PCMCIA cards

Needs firmware softing-fw-4.6-binaries.tar.gz

SocketCAN Support in Programming Languages/Environments

can4linux Supported Controllers

  • Allwinner A20 with integrated CAN (on the popular BananaPi single-board computer.)
  • Analog Devices BlackFin BF537
  • Atmel AT91 SoCs
  • Freescale FlexCAN (ColdFire 5282, i.MX25, i.MX28, i.MX35)
  • Intel 82527 (the replacement Bosch CC770 should work)
  • Microchip Stand Alone CAN MCP2515
  • NXP Stand Alone CAN SJA1000 (on different ISA or PCI/PCIe boards)
  • Xilinx Zynq with XCAN
  • 'virtual' CAN mode without CAN hardware
  • 'virtual' CAN mode supporting CAN FD
  • IFI CAN FPGA IP, in classic CAN mode and CAN FD mode

can4linux Support in Programming Languages/Environments

  • C - many examples and useful applications are provided with the package, check can4linux-examples/
  • Tcl/Tk also in can4linux-examples/
  • Python also in can4linux-examples/

CAN Controllers Emulation (WIP/experimental)

  • SJA1000 CAN controller based PCI board emulation for QEMU
    • Cards models provided:
      • Simple memory mapped SJA1000 in the first PCI BAR with ad-hoc PCI ID
      • Kvaser PCIcan-S single I/O mapped SJA1000 model compatible with kvaser_pci Linux driver on guest side
      • Advantech PCM-3680i PCI CAN (dual SJA1000 channel)
    • The emulated CAN buses can be connected to virtual or physical SocketCAN interface if Linux is used as host system
    • Project repository: https://github.com/CTU-IIG/qemu branch can-pci
    • Work started by 2013 GSoC project when RTEMS project donated its slot to work on QEMU CAN support - see RTEMS related page for more info and use instructions
    • Some instructions and RTLWS article can be found at https://rtime.felk.cvut.cz/can/can-qemu/

SocketCAN Bechmarking

SocketCAN Tutorials