Difference between revisions of "Category:BeagleBoard Expansion Boards"
Peter Huewe (talk | contribs) (Fix category) |
|||
(7 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
* [[BeagleBoardPinMux|Expansion Board Support Information]] | * [[BeagleBoardPinMux|Expansion Board Support Information]] | ||
* [[BeagleBoardPeripherals|BeagleBoard peripherals and adapters page]] about useful BeagleBoard add ons. | * [[BeagleBoardPeripherals|BeagleBoard peripherals and adapters page]] about useful BeagleBoard add ons. | ||
+ | * [[File:Beagleboard.jpg|200px|thumb|BeadaFrame]]BeadaFrame 7" LCD display kit | ||
+ | ** 7" 800x480 TFT LCD screen | ||
+ | ** LED Backlight control | ||
+ | ** Resistive touch screen | ||
+ | ** Plastic frame | ||
+ | <br/> | ||
+ | Available from [http://www.nxelec.com/ NAXING Electronics] | ||
* LVDS LCD add-on board is now available from [http://bb-lvds.blogspot.com LVDS LCD] for $9.89 (bare PCB) or $29.89 (fully assembled and tested board) | * LVDS LCD add-on board is now available from [http://bb-lvds.blogspot.com LVDS LCD] for $9.89 (bare PCB) or $29.89 (fully assembled and tested board) | ||
** connects directly to LCD headers on the bottom of BeagleBoard (-xM) | ** connects directly to LCD headers on the bottom of BeagleBoard (-xM) | ||
Line 53: | Line 60: | ||
* [[BeagleBoardRawLCD|Interfacing BeagleBoard to Raw LCD]] | * [[BeagleBoardRawLCD|Interfacing BeagleBoard to Raw LCD]] | ||
* [[BeagleBoard/BugAdapter|BeagleBoard Bug Adapter board]] | * [[BeagleBoard/BugAdapter|BeagleBoard Bug Adapter board]] | ||
− | * [http://wiki.openmoko.org/wiki/Openmoko_Beagle_Hybrid Openmoko Beagle Hybrid] is a LCD adapter for a Openmoko 2'8 VGA touchscreen plus GPS and some sensors. It is | + | * [http://wiki.openmoko.org/wiki/Openmoko_Beagle_Hybrid Openmoko Beagle Hybrid] is a LCD adapter for a Openmoko 2'8 VGA touchscreen plus GPS and some sensors. It is available through http://www.handheld-linux.com/wiki.php?page=Openmoko%20Beagle |
In Canada, check out [[http://robotcraft.ca RobotCraft]] in London, Ontario for expansion boards. | In Canada, check out [[http://robotcraft.ca RobotCraft]] in London, Ontario for expansion boards. |
Revision as of 21:25, 1 July 2012
- Expansion Board Support Information
- BeagleBoard peripherals and adapters page about useful BeagleBoard add ons.
- BeadaFrame 7" LCD display kit
- 7" 800x480 TFT LCD screen
- LED Backlight control
- Resistive touch screen
- Plastic frame
Available from NAXING Electronics
- LVDS LCD add-on board is now available from LVDS LCD for $9.89 (bare PCB) or $29.89 (fully assembled and tested board)
- connects directly to LCD headers on the bottom of BeagleBoard (-xM)
- has 3 configuration signals required by some LVDS LCD panels
- provides up to 1.2A of 3.3V to directly power LCD panel
- open-source project (schematic and Gerbers are available for free download)
- Trainer Boards are now available from TinCanTools for $59.00
- I2C interface(+3.3v or +5v selectable)
- Can be used with the Nintendo Wii NunChuk interface
- Pin compatible with WiiChuk Adapter
- WiiChuk Adapter is available from SparkFun
- SPI inteface (+3.3v)
- GPIO's(+3.3v)
- Large prototyping area (0.1" x 0.1" matrix with access to power bus)
- Atmega328 processor (user programmable)
- Arduino compatible
- ATmega328 power is +3.3v or +5v selectable
- Communicate to the ATmega328 via the BeagleBoard's second RS-232 uart
- I2C interface(+3.3v or +5v selectable)
- BeagleBoard Zippy expansion board is now available from TinCanTools for $79.00. basic specs are:
- Battery Backed RTC
- Second MMC slot
- 10BaseT Ethernet
- Second RS-232
- +5V level I2C
- AT24 EEPROM
- BeagleServer expansion board is an Open Hardware project. Currently a high level design note is available, which describes the components to be used. It aims at the following specifications :
- Aims at transforming a Beagleboard or IGEPv2 into a full-blown home server that could cater to home automation needs
- Compatible with both the Beagleboard and the IGEPv2
- 12V battery powered, or mains-powered (accepts 9 ~ 18V)
- Enough power for an internal 2.5" or 3.5" hard-disk, USB-attached
- +3.3V and +5V I2C; +5V I2C is buffered with a line buffer accepting a larger capacitance which allows I2C devices at distances up to 50m
- I2C to 1-wire hub (using DS2482-800 which is supported by OWFS); plugging in 1-wire devices lights a LED which makes it easy to confirm if a 1-wire device is detected.
- Real time clock with super-capacitor backup
- Internal monitoring of the HW health (power supplies + temperature)
- Some relays
- Ethernet-based console port
- a few other options (RS232 interface with CTS and RTS, SPI port, S-video, additional SD-card)
- HY Research has some expansion board basics and example.
- 4.3", 4.8" interface boards
- Outdoor visible 7.0" LCD and interfaces.
- Boards are configured to minimize overall profile.
- Items available for sale via the Estore
- Beaglebot uses a custom extension board.
- Leopard Board, a Beagle buddy web camera
- There is also a VGA DB15 adapter board under development for the Rev C2 board. It should be available through a yet to be announced outlet.
- BeagleBoard Barker Communications accessory board for the BeagleBoard
- BeagleBoard Hardhat Industrial I/O expansion board (4-20mA input and output, 0-10V input and output, dry contact input and output)
- BeagleBoard Hardware Interfacing explains howto create expansion Boards.
- BeagleBoard Showdog LCD and Touchscreen board for the BeagleBoard.
- BeagleBoard Tracker is a Xilinx Spartan 3A FPGA connected directly to the Beagle expansion connector.
- Xenarc USB touchscreen for Beagleboard/OMAP3 EVM
- Interfacing BeagleBoard to Raw LCD
- BeagleBoard Bug Adapter board
- Openmoko Beagle Hybrid is a LCD adapter for a Openmoko 2'8 VGA touchscreen plus GPS and some sensors. It is available through http://www.handheld-linux.com/wiki.php?page=Openmoko%20Beagle
In Canada, check out [RobotCraft] in London, Ontario for expansion boards.
Pages in category "BeagleBoard Expansion Boards"
The following 28 pages are in this category, out of 28 total.
B
- BBB Audio Cape RevB Getting Started
- BBB RS232 Cape RevB Getting Started
- BBB-GVS
- BeaconBoard
- BeagleBoard Barker
- BeagleBoard Hardhat
- BeagleBoard Showdog
- BeagleBoard Tracker
- BeagleBoard Trainer
- BeagleBoard Zippy
- BeagleBoard Zippy2
- BeagleBoardToys/BeagleBone TiWi-5E w/ EXT. Antenna
- BeagleBoardToys/FAQ
- BeagleBoardToys/Reprogram ULCD7 Lite EEPROM
- BeagleBone/GeigerCapePrototype
- BeagleBone/I2CLCDDemo
- BeagleBrick
- BeBoPr++