Difference between revisions of "CircuitCo/Radarcape"
|Line 116:||Line 116:|
To go back to the cape list, please click [
To go back to the cape list, please click [CircuitCo/BeagleBone_Capes ]
Latest revision as of 22:24, 19 December 2012
An ADSB / Mode-A/C air data receiver with a nanosecond accurate GPS based time stamp option. Used to monitor aircraft positions in the range of the local antenna and exchanging this information with local PCs or through internet. Contains an Altera EP3C16 FPGA, MAX1193 dual channel ADC, a 1090MHz receiver and a Trimble Resolution SMT GPS module. Subsidary use is as an NTP Stratum 1 time standard. FPGA is loaded from Beaglebone using passive serial mode. Aircraft data is available on ttyO5, GPS information on ttyO2. The board is prepared to be equipped with a 15MSample 12bit ADC for SDR applications.
|Power Supply||5V/200mA without GPS|
|5V/300mA with GPS via VDD_5V, optionally SYS_5V|
|Indicators||2 dual color (red/green) on front panel|
|1 red LED on board|
|Connectors||1 SMA connector for a 1090MHz antenna|
|1 UFL for a pigtail connecting the GPS to external|
|1 UFL for the SDR receiver|
|Size||2.15" x 3.40"|
|Open Source||Partly on proven request|
|System Reference Manual||Yes|
|Schematics||Partly on proven request|
|PCB Files||Not public|
|Gerber Files||Not public|
|Bills of Materials||Available on request|
Vendors have not yet been disclosed.
To go back to the cape list, please click here