Please note that User Registration has been temporarily disabled due to a recent increase in automated registrations. If anyone needs an account, please request one here: RequestAccount. Thanks for your patience!--Wmat (talk)
Please email User:Wmat if you experience any issues with the Request Account form.

DE:RPi Tutorial Easy GPIO Hardware & Software

Revision as of 00:25, 17 April 2012 by Naicheben (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Back to the Hub, or the Tutorials page.

GPIO Hardware & Software Tutorials:


Wärend die meissten der hier aufgeführten Schaltungen direkt ans RPi angeschlossen werden, wird der Gebrauch eines gepufferten Interface (so wie beim Gertboard) angeraten zum Schutz vor grevierenden Schäden. Alternativ kann man auch mit diesen Experimentierboards arbeiten: #Alternative Test Platforms.

Höchste Vorsicht ist geboten wenn auf Low Level Ebene Hardware angeschlossen wird, das RPi kann dabei zerstört werden, Dein Equipment und potentiell Du selbst und/oder Andere. Es geschieht alles auf eigene Gefahr!


Dieses Tutorial basiert auf diesem Thread und zielt drauf ab basis Schaltungen für die General Purpose Input/Output (GPIO) des RPi's zu erstellen. Grundlagen der Elektronik sind erforderlich (z.B. Grundwisse über grundlegende diskrete Bauteile wie Transistoren, Dioden und Widerstände):

Nützliche Links/Resourcen

  • The Electronics Club - Eine excellente Quelle für Anfänger der Elektronik (auf Englisch), erklärt viele Basisschaltungen.

Alternative Test Platformen

Until you have a RPi to test with, there are many alternative platforms available which will allow the testing of basic circuits. In addition, they may be interfaced with directly using the RPi in the future.

  • TI LaunchPad - A low cost development platform ($4.30 including free world shipping). Includes programmer/debug board, two processors (with 16 GPIO including I2C/SPI/UART, 8ch 10bit ADC etc).
  • Arduino - Common hobbyist development platform. Excellent community support and additional hardware.
  • STM32 Primer/EvoPrimer - Self-contained development platform. Mentioned since I may use one at some point (I bought the original Primer a long time ago). It includes a battery, acceleration sensors and built in display screen.

Completed Tutorials

Until RPi devices are available, I can not confirm this will work on a real RPi.
For now, I shall be using the TI LaunchPad (see  Alternative Test Platforms
for details) to test the hardware on (as it is cheap and the logic levels similar).

Basic Circuits

1. LED output

Directly driven (will need very low powered LED) or driven via transistor (allowing higher current). Includes example 8xLED Test Module.

3. Simple on/off switch input

With or without de-bouncing, protection resistors etc. Includes example 8xSwitch Test Module.

Planned Tutorials

Basic Circuits

1. LED output

Completed see above.

2. Small DC motor drive

MOSFET or Darlington Pair to provide high power drive and reverse bias diode to protect from motor coils.

3. Simple on/off switch input

Completed see above.

4. Analogue resistive sensor sampled as a digital input

Using a basic transistor switch circuit.

Intermediate Circuits

1. Shift Registers - Multiplexing Data

An introduction to using additional ICs. In this case, using a parallel to serial 8-bit shift register to read 8 digital inputs using two GPIO pins.

2. Analogue to Digital Circuit

Use of a ADC chip to sample inputs.

3. PWM Driving Circuit

For example motor speed control.

4. Alpha-numeric 2x16 LCD Display

(IN-PROGRESS) Control via 4-wire data (total 6 GPIO) and also alternative 2-wire interface circuit.

Advanced Circuits

1. Control Hardware Over The Internet

Implement web control and monitoring of GPIO connected components.

2. Communicating With Other Micro-controllers

Communicate with other micro-controllers so that features such as ADCs can be used.

Contributing to this tutorial

This is an open project so please feel welcome to add your own sections and improve its content.

Please see the Talk:RPi Tutorial Easy GPIO Hardware & Software page to discuss this page.