DaVinci

From eLinux.org
Revision as of 13:35, 3 December 2009 by Prpplague (talk | contribs)
Jump to: navigation, search
Davincilogo.gif

Texas Instruments DaVinci™ is a family of multimedia system on chip processors for embedded application. Most of DaVinci processors based of of ARM and DSP microprocessor cores.

DaVinci SDK uses U-Boot, MontaVista Linux, OpenEmbedded

Important resources

Undocumented Findings

Guide.jpeg - RBL: booting from NAND and ECC/Bad blocks - DaVinci RBL 1.0

Guide.jpeg - IRC snippits - DaVinci IRC

Guide.jpeg - Pinmux_1.0

Programing

Example Program.gif - Blinking LEDS on the EVM over I2c - EVM_LED_Blinking.c

Example Program.gif - Simple TTY host program to access serial port - EVM_comz.c

Example Program.gif - PWM kernel driver (char driver) - PWM.c Good example for your own device drivers

Example Program.gif - Accessing an I2C temperature sensor - temp_sens.c

Example Program.gif - Useful I2C routines - I2Croutines.c

Guide.jpeg - Overclocking the EVM EVMoc

Hardware Hacks

Hack.jpg - Adding a second MMC / SD slot - Second MMC / SD

Hack.jpg - Installing some input buttons - Input buttonz

Hack.jpg - Adding I2C devices (e.g. Temp Sensor) - I2C Mods

Mailing Lists and Useful Links

Chats and Forums

Davinci IRC chat can be found in the #davinci channel on irc.freenode.net. For more information about Freenode, see www.freenode.net

General IRC help can be found here :- IRC Help [1]