Difference between revisions of "DaVinci USBHost 1.0"

From eLinux.org
Jump to: navigation, search
Line 7: Line 7:
 
Select drivers -> SCSI.
 
Select drivers -> SCSI.
  
Enable scsi and enable search multiple LUI option.
+
Enable scsi disk support and enable Probs multiple LUN option.
  
 
Select drivers -> USB.
 
Select drivers -> USB.
  
Enable USB Host Mode.
+
Enable Host-side USB.
 +
 
 +
Enable USB device filesystem.
  
 
Enable USB Mass Storage Device option.
 
Enable USB Mass Storage Device option.

Revision as of 11:03, 5 June 2007

USB Host Guide 1.0

cd into your kernel lsp directory.

Run make menuconfig.

Select drivers -> SCSI.

Enable scsi disk support and enable Probs multiple LUN option.

Select drivers -> USB.

Enable Host-side USB.

Enable USB device filesystem.

Enable USB Mass Storage Device option.

Get the kernel onto your board in the usual way.

Make sure the jumper by the USB port is in the right location for HOST mode (check manual).

mkdir /usbdrive

insert your USB card reader

mount your card using:

mount /dev/sdXX /usbdrive -o sync

where XX = a1, a2, a3, b1 etc..

Enjoy!