Difference between revisions of "DaVinci USBHost 1.0"
Revision as of 16:51, 5 June 2007
USB Host Guide 1.0
cd into your kernel lsp directory.
Run make menuconfig.
Select drivers -> SCSI.
Enable scsi disk support and enable Probs multiple LUN option.
Select drivers -> USB.
Enable Host-side USB.
Enable USB device filesystem.
Enable USB Mass Storage Device option.
Get the kernel onto your board in the usual way.
Make sure the jumper by the USB port is in the right location for HOST mode (check manual).
insert your USB card reader
mount your card using:
mount /dev/sdXX /usbdrive -o sync
where XX = a1, a2, a3, b1 etc..