Difference between revisions of "Devkit8000"

From eLinux.org
Jump to: navigation, search
(JTAG Tool)
(Add Category Development Boards)
Line 43: Line 43:
 
* [http://processors.wiki.ti.com/index.php/XDS100 XDS100v2] - the second release of the XDS100 JTAG emulator technology supporting debug of a variety of TI devices.  
 
* [http://processors.wiki.ti.com/index.php/XDS100 XDS100v2] - the second release of the XDS100 JTAG emulator technology supporting debug of a variety of TI devices.  
 
Available from [http://www.armkits.com/product/xds100.asp Embest]
 
Available from [http://www.armkits.com/product/xds100.asp Embest]
 +
[[Category:Development Boards]]

Revision as of 07:49, 9 May 2011

Hardware

Embest DevKit8000 Evaluation Board is a compact board using TI's OMAP3530 600MHz ARM Cortex-A8 (600MHz ARM Cortex-A8 core paired with a 430MHz TMS320C64x+ DSP core) microprocessor. It takes full features of this processor and supports up to 256MByte DDR SDRAM and 256MByte NAND Flash as well as high-speed USB2.0 OTG function. The board has exposed many other hardware interfaces including RS232 serial port, LCD/TSP, DVI-D, S-Video, Ethernet, SD, keyboard, camera, SPI, I2C and JTAG. The board has two methods to boot the system from either SD card or NAND flash. It is able to support WinCE and Linux OS and provided with WinCE6.0 BSP and Linux2.6.28 BSP. Embest also provides demos of Google Android OS, Angstrom (GPE) and DVSDK for user experience.

Devkit8000header.gif


  • Dimensions: 110mm x 95mm
  • Working temperature: 0°C to 70°C
  • Processor: TI OMAP3530 microprocessor with 600MHz ARM Cortex-A8 RISC Core
  • Power supply: +5V
  • 256MB DDR SDRAM, 166MHz
  • 256MB NAND Flash, 16bit
  • LCD/Touch Screen interface (50-pin FPC connector, support resolution up to 2048*2048)
  • DVI high-resolution image output port (HDMI interface, support 720p, 30fps signal)
  • S-Video display interface
  • One audio input interface (3.5mm audio jack)
  • One 2-channel audio output interface (3.5mm audio jack)
  • One 10/100M Ethernet interface (RJ45)
  • One High-speed USB2.0 OTG port (Mini USB type interface)
  • One High-speed USB2.0 Host port (USB A type interface)
  • Two serial ports (one 3-wire RS232 serial port led out from 2.54mm 10-pin connector and one 5-wire TTL serial port led out from expansion connector)
  • SD card interface (supports 3.3V and 1.8V logic voltage)
  • One camera interface (30-pin FPC connector, support CCD or CMOS camera)
  • 6*6 keyboard interface
  • One 14-pin Jtag interface
  • Four buttons (Reset, Boot, User defined, On/Off)
  • One expansion connector (2.0mm 40-pin SMT Female Pin Header, McSPI, McBSP, I2C, HDQ, GPIO are led out from this connector)


Optional Function Modules


JTAG Tool

  • XDS100v2 - the second release of the XDS100 JTAG emulator technology supporting debug of a variety of TI devices.

Available from Embest