Devkit8000 FAQ - Revision history

Yclinda666: /* How to distribute static IP in android demo system? */

2011-06-15T09:03:30Z

‎How to distribute static IP in android demo system?

Yclinda666: /* Other problems */

2011-06-13T06:35:14Z

‎Other problems

Yclinda666: /* How to solve BP_ReadData call failed in WinCE? */

2011-06-13T06:33:44Z

‎How to solve BP_ReadData call failed in WinCE?

Yclinda666: /* How to establish KITL connection? */

2011-06-13T06:33:05Z

‎How to establish KITL connection?

Yclinda666: /* How to establish KITL connection? */

2011-06-13T06:32:40Z

‎How to establish KITL connection?

Yclinda666: /* How to update WinCE image to Nand Flash? */

2011-06-13T06:31:16Z

‎How to update WinCE image to Nand Flash?

Yclinda666: /* USB OTG used as Host */

2011-06-13T06:30:19Z

‎USB OTG used as Host

Yclinda666 at 06:29, 13 June 2011

2011-06-13T06:29:14Z

Yclinda666 at 04:04, 13 June 2011

2011-06-13T04:04:29Z

Yclinda666 at 04:00, 13 June 2011

2011-06-13T04:00:01Z

← Older revision		Revision as of 09:03, 15 June 2011
Line 502:		Line 502:


−	[[Category:OMAP]][[Category:Linux]]	+	[[Category:OMAP]][[Category:Linux]][[Category:Development Boards]][[Category:Devkit8000]]

@@ Line 448: / Line 448: @@
 =Other problems=
 ==Reference==
-* Qt：http://qt.nokia.com/<br>
+* Qt: http://qt.nokia.com/<br>
-* Oxroid-android2.1：http://code.google.com/p/0xdroid/wiki/UsingPreBuiltImages<br>
+* Oxroid-android2.1: http://code.google.com/p/0xdroid/wiki/UsingPreBuiltImages<br>
-* TI-android：http://code.google.com/p/rowboat/wiki/Main?tm=6<br>
+* TI-android: http://code.google.com/p/rowboat/wiki/Main?tm=6<br>
 ==Download format tool==
@@ Line 456: / Line 456: @@
 ==Could not boot from SD card==
-Answer: We recommend user to use HP USB Disk Storage Format Tool 2.0.6 tool to format your SD card. Please download the tool from below link:<br>
+Answer: we recommend user to use HP USB Disk Storage Format Tool 2.0.6 tool to format your SD card. Please download the tool from below link:<br>
 http://www.embedinfo.com/english/download/SP27213.exe<br>
 Then follow below steps:<br>
-.    Insert your SD card to card reader in PC;<br>
+. Insert your SD card to card reader in PC;<br>
-.    Open HP USB Disk Storage Format Tool;<br>
+. Open HP USB Disk Storage Format Tool;<br>
-.    Select "FAT32" system format;<br>
+. Select "FAT32" system format;<br>
-.    Click "Start";<br>
+. Click "Start";<br>
-.    Click "OK" after finished formatting;<br>
+. Click "OK" after finished formatting;<br>
-.    Copy the image to SD card and try to boot again from SD card.<br>
+. Copy the image to SD card and try to boot again from SD card.<br>
 ==How to modify parameters of u-boot.bin for provided demo?==
-Answer: Please use u-boot source code of Devkit8000, modify MACH-ID and then recompile.<br>
+Answer: please use u-boot source code of Devkit8000, modify MACH-ID and then recompile.<br>
 . Modify board/omap3devkit8000/omap3devkit8000.c file in u-boot-1.3.3 source code.<br>
 Please find board_init function and modify:<br>

@@ Line 386: / Line 386: @@
 ==How to solve BP_ReadData call failed in WinCE?==
-Answer:Please follow below steps:
+Answer: please follow below steps:<br>
 . Use software HP Disk Storage Format Tool to format SD card to FAT or FAT32 file system;<br>
 . Copy the image file(MLO, EBOOTNAND.nb0, NK.bin, XLDRNAND.nb0, ADevKit8000.exe) from  CD:\wince_6\image\ dvi1280X720 or lcd480X272 to SD card, then change the name from EBOOTNAND.nb0 to EBOOTSD.nb0 in the SD card.<br>

@@ Line 382: / Line 382: @@
 User can use USB RNDIS for downloading NK.bin and KITL transmitting. <br>
 . Please install RNDIS driver in PC;<br>
-. Set IP address for virtual network and Devkit8000, make sure they are in the same segment; but different from PC IP segment;<br>
+. Set IP address for virtual network and Devkit8000, make sure they are in the same segment, but different from PC IP segment;<br>
 . Set booting device USB RNDIS in Eboot and select dubuging device to USB RNDIS.<br>

@@ Line 381: / Line 381: @@
 Answer: At present the Devkit8000 board can only support download NK.bin through DM9000 Ethernet and could not support KITL transmitting. That's because the bootloader and OAL public domain code have no address map in WinCE system and access to DM9000 physical address directly. <br>
 User can use USB RNDIS for downloading NK.bin and KITL transmitting. <br>
-. Please install RNDIS driver in PC;
+. Please install RNDIS driver in PC;<br>
-. Set IP address for virtual network and Devkit8000, make sure they are in the same segment but different from PC IP segment;<br>
+. Set IP address for virtual network and Devkit8000, make sure they are in the same segment; but different from PC IP segment;<br>
 . Set booting device USB RNDIS in Eboot and select dubuging device to USB RNDIS.<br>
 ==How to solve BP_ReadData call failed in WinCE?==

@@ Line 289: / Line 289: @@
 ==How to update WinCE image to Nand Flash?==
 Answer: Please follow below steps: <br>
-(1)Run the software of HP Disk Storage Format Tool and format the SD card for FAT or FAT32 filesystem.<br>
+. Run the software of HP Disk Storage Format Tool and format the SD card for FAT or FAT32 filesystem.<br>
-(2) Copy the image file(MLO, EBOOTNAND.nb0, NK.bin, ADevKit8000.exe) from  CD:\wince_6\image\ lcd480X272 to SD card, then change the name from EBOOTNAND.nb0 to EBOOTSD.nb0 in the SD card.<br>
+. Copy the image file(MLO, EBOOTNAND.nb0, NK.bin, ADevKit8000.exe) from  CD:\wince_6\image\ lcd480X272 to SD card, then change the name from EBOOTNAND.nb0 to EBOOTSD.nb0 in the SD card.<br>
-(3) Insert the SD card to the board, press the BOOT button and then power on the board again; HyperTerminal will start printing the output information, at the same time press  [SPACE] to enter the EBOOT menu.<br>
+. Insert the SD card to the board, press the BOOT button and then power on the board again; HyperTerminal will start printing the output information, at the same time press  [SPACE] to enter the EBOOT menu.<br>
-(4) Press [5] to enter the Flash manage menu.<br>
+. Press [5] to enter the Flash manage menu.<br>
-(5) Press [a], [b], [c] separately to write the image(XLDR, EBOOT, NK) to flash.<br>
+. Press [a], [b], [c] separately to write the image(XLDR, EBOOT, NK) to flash.<br>
-(6) Press [0] to return to the main menu, and press [2], [4], [7], [7] to change the boot device.<br>
+. Press [0] to return to the main menu, and press [2], [4], [7], [7] to change the boot device.<br>
-(7) Power on the system again, and then the board will boot from the NAND flash. <br>
+. Power on the system again, and then the board will boot from the NAND flash. <br>
 ==How to Shield touch screen print information after WinCE booted?==

@@ Line 204: / Line 204: @@
 ==USB OTG used as Host==
 Answer: If using USB OTG interface as USB Host, please follow below steps:<br>
-) Connect Hub power to USB Hub;<br>
+. Connect Hub power to USB Hub;<br>
-) Connect USB OTG cable to Devkit8000 board;<br>
+. Connect USB OTG cable to Devkit8000 board;<br>
-) Power on and get into system;<br>
+. Power on and get into system;<br>
-) Plug in USB Hub to USB OTG through cable;<br>
+. Plug in USB Hub to USB OTG through cable;<br>
-) Insert USB mouse or keypad to USB Hub.<br>
+. Insert USB mouse or keypad to USB Hub.<br>
 If user uses your own USB cable, please pay attention to USB OTG (Mini-AB) wire map:<br>

@@ Line 70: / Line 70: @@
 OMAP3 DevKit8000 # setenv bootargs console=ttyS2,115200n8 ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs video=omapfb:mode:VGA<br>
-== How to use tftp to update image booting from Nand flash?==
+==How to use tftp to update image booting from Nand flash?==
 Answer: [[Devkit8000]] has 10/100M Ethernet (DM9000) on board, user can update image booting from Nand flash through tftp.<br>
 ）x-loader booting image update<br>
@@ Line 286: / Line 286: @@
 Answer: Please configurate board/omap3devkit8000/omap3devkit8000.c in MUX_DEFAULT_ES2, refer to the Seventh Chapter "System Control Module" for detailed configuration way.<br>
-=Wince Problems=
+=Wince problem=
 ==How to update WinCE image to Nand Flash?==
 Answer: Please follow below steps: <br>
@@ Line 447: / Line 447: @@
 Delete the "IF IMGNOCALIBRATION" and "ENDIF IMGNOCALIBRATION", compile it again.
-[[Category:OMAP]][[Category:Devkit8000]]
+[[Category:OMAP]][[Category:Linux]]

← Older revision		Revision as of 04:04, 13 June 2011
Line 451:		Line 451:


−	[[Category:~~Devkit8000~~]][[Category:~~OMAP~~]]	+	[[Category:OMAP]][[Category:Devkit8000]]

← Older revision	Revision as of 04:00, 13 June 2011
Line 419:	Line 419:


	+	==How to get fixed-size of touch screen display?==
	+	1. you have to get the "CalibrationData", you can enter your wince via calibration, use the "Regedit.exe" to open the regedit, open the directory of [HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH] and check the "CalibrationData"=" xxxxxxxx "
	+
	+	2.open the "\BSP\DevKit8000\FILES\platform.reg" with visual studio 2005:
	+
	+	;-- Touch Screen driver --------------------------------------------------------
	+	; @CESYSGEN IF CE_MODULES_POINTER
	+	; @CESYSGEN IF GWES_TCHUI
	+	; @XIPREGION IF PACKAGE_OEMDRIVERS
	+	IF BSP_NOTOUCH !
	+	[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
	+	"DriverName"="touch.dll"
	+	IF IMGNOCALIBRATION
	+	"CalibrationData"="xxxxxxxx "
	+	ENDIF IMGNOCALIBRATION
	+	"MaxCalError"="6"
	+	"SPIAddr"=dword:0 ; McSPI1 channel 0
	+	"PenGPIO"=dword:1B ; gpio27// gpio_175
	+	"PenUpDebounceMS"=dword:28 ; PenUp debounce time in MS, 0 to disable debounce process
	+	"InitialSamplesDropped"=dword:2 ; Number of samples to be dropped after pen down detection ; Default is 1
	+	;"SampleRate"=dword:64 ; samples per second, default is 100
	+	ENDIF BSP_NOTOUCH !
	+	; @XIPREGION ENDIF PACKAGE_OEMDRIVERS
	+	; @CESYSGEN ENDIF GWES_TCHUI
	+	; @CESYSGEN ENDIF CE_MODULES_POINTER
	+
	+	Delete the "IF IMGNOCALIBRATION" and "ENDIF IMGNOCALIBRATION", compile it again.