Didj Common Commands
This is a collection of useful commands to have when accessing your Didj from the command prompt. Its meant as a quick reference guide, for more complex procedures look in the Tutorials/How To'ssection of the Didj Wiki main page.
Shutdown or Start up AppManger
/etc/init.d/lightning (start | stop | restart)
usbctl -d mass_storage -a enable
usbctl -d mass_storage -a disable
usbctl -d mass_storage -a unlock
Use enable and unlock to make USB drive accessible from host computer.
Mounting Commands in Didj
(note) NAND partitions can not be shared by USB host and device simultaneously. Developers should use the usbctl command judiciously to avoid corrupting NAND.
Mount the Manufacturers partition
mount -t jffs2 $mfgdatamnt /mnt2/mfg
Remount the Manufactures partition as RW
mount -o remount,rw /mfgdata
Remount the root fs as RW
mount -o remount, rw /
mount /dev/root / -o remount,rw
Power off the screen
mlc-control /dev/mlc s enable off