Didj and Explorer MMC Patch

From eLinux.org
Revision as of 01:28, 27 July 2010 by Reggie (Talk | contribs)

Jump to: navigation, search

The original source code for the MMC drivers that were released for the LX were not completed but lucky for us there was a patch included that finishes them to a usable state.


Notice: Hot swapping is not supported yet and may lead to data loss in the event that the card is not unmounted before it is removed.


Here are the files you will need (Located on Moogle's server for now) mmc_patch_Kconfig.patch mmc_patch_lf1000-sdio.patch

to apply these patches just copy them to /drivers/mmc/host/ and type the following

patch lf1000_mmc.c < mmc_patch_lf1000-sdio.patch
patch Kconfig < mmc_patch_Kconfig.patch

now when you do a make menuconfig build the MMC drivers as modules then

make -j Number of cpu cores+1  
sudo make modules_install

and your modules will be in /lib/modules/2.6.31-leapfrog on your system ready for you to copy them over

it is best to copy them to /lib/modules/2.6.31-leapfrog/kernel/drivers/mmc/

when you want to mount a card simply type

modprobe /lib/modules/2.6.31-leapfrog/kernel/drivers/mmc/host/lf1000_mmc.ko
modprobe /lib/modules/2.6.31-leapfrog/kernel/drivers/mmc/card/mmc_block.ko

you will then see something like the following

mmcblk0: mmc0:0002 00000 3.82 GiB
mmcblk0:
p1

to mount the card type

mount /dev/mmcblk0p1 /mnt

and you have access to the files on your micro sd card now in the /mnt directory

to unmount the card simply type

umount /dev/mmcblk0p1

much thanks to zucchini for the help