Difference between revisions of "EBC Exercise 01 Start Here"
m (→Kernel Development: Updated to 4.4) |
m (→Overview) |
||
Line 7: | Line 7: | ||
# Get your Beagle Hardware together | # Get your Beagle Hardware together | ||
# Set up a host computer, running Linux for code development | # Set up a host computer, running Linux for code development | ||
− | # Clone the course git repository on both the | + | # Clone the course git repository on both the host and the Beagle |
== The Hardware == | == The Hardware == |
Revision as of 10:38, 2 August 2017
Embedded Linux Class by Mark A. Yoder
Contents
Overview
There are three major things that need to be done to have the BeagleBoard ready to run for class:
- Get your Beagle Hardware together
- Set up a host computer, running Linux for code development
- Clone the course git repository on both the host and the Beagle
The Hardware
Here's the hardware you will need and where you get it.
You may have, or will have to buy
We are using the BeagleBone Black this year. Since it's only $50 (or so) I'll have you buy your own. There are a few other things you will need to get before the first day of class.
- BeagleBone Black. See http://beagleboard.org/ for suggestions of where to buy the Black. I suggest ordering sooner rather than later since it may take a couple of weeks.
- At least three 8G micro SD cards. I suggest you have 3 or 4 cards since it's easy to mess up one and it takes some 10 minutes to reload it.
- micro SD card reader/writer
- Powered USB hub, at least 4 ports. The Black has only one USB port so this will allow you to plug in the keyboard, mouse, web cam, etc.
Books
- Exploring BeagleBone.
- BeagleBone Cookbook (Not the BeagleBone Black Cookbook, it's a different book.)
What you buy from the Instrument Room
- various input devices, sensors, displays, etc.
What you borrow from the Instrument Room
- Proto Plate with full sized breadboard
- 5V power supply
- Playstation EYE web cam
- micro HDMI to HDMI adapter
- FTDI USB to Serial Adapter Must be 3.3V version
- Bicolor LED Square Pixel Matrix with I2C Backpack
- Two (2) TMP101 temperature sensors
- TMP006 Infrared Thermopile Sensor (too small to mount, we won't use this)
- PCA9306 Dual Bi-Directional I2C-Bus and SMBus Voltage Level-Translator
- L293 Quadruple Half-H Drivers
The Linux host computer
The above will get you ready for about the first 4 weeks of class. Around week 5 we'll start looking at the kernel and will need to cross compile. Once we start moving into Kernel development we will need a host computer. Since we are doing Linux development, it's generally agreed the host should be running Linux. I suggest you run Ubuntu 16.04 (LTS). The CSSE department has a local copy so you don't have to download some 700M. You want the desktop-amd64.iso if you have a 64-bit machine, or the desktop-i386.iso if you are running 32-bits.
There are three options as to how to run Linux.
- Native install ([1])
- Install in a virtual machine. I've been running Virtual Box recently and it works fine. I suggest using it. You can also try VMware Player if you would like.
- Run in the cloud
No matter which method you use be sure to have some 16G of disk space. The kernel tools will need at least 6G.
The Ubuntu site gives good instructions for a native install. I've had good success with running both VMware and Virtual Box, though my installation instructions are a bit dated. (Feel free to update them if they need it.)
I've been testing out the "Cloud" approach and it looks like it will work too. If you want to try the cloud, let me known and I'll ask CSSE to set up a machine for you.
Kernel Development
Once you have Linux running somewhere, you need to install the kernel development tools. Go to EBC_Exercise_08_Installing_Development_Tools_4.4 to see all the steps you need.
Now that you have all these pieces in place you are ready to work with a very powerful embedded processor.
The class git repository
Once you have an up to date OS running on your Beagle, go to EBC Exercise 05 Getting Exercise Support Materials to learn how to clone the class git repository. Once cloned it's a single command to get the latest materials on your Beagle (or host computer for that matter).
Embedded Linux Class by Mark A. Yoder