Difference between revisions of "EBC Exercise 10 Flashing an LED"

From eLinux.org
Jump to: navigation, search
m (Reading the User Button: Removed)
m (Challenge: Removed)
 
(11 intermediate revisions by 2 users not shown)
Line 4: Line 4:
 
{{EBC3.8}}This page is for the Bone (Black or White) running the 3.8 Kernel. See [[EBC_Exercise_10_Flashing_an_LED_-_xM_WhiteBone]] for the White Bone or xM running 3.2.
 
{{EBC3.8}}This page is for the Bone (Black or White) running the 3.8 Kernel. See [[EBC_Exercise_10_Flashing_an_LED_-_xM_WhiteBone]] for the White Bone or xM running 3.2.
  
The [http://en.wikipedia.org/wiki/Hello_world_program "Hello World"] program is the traditional first program for many classes.  Flashing an LED is the embedded equivalent.  Here we will explore a few ways to flash and LED on the Beagle and explore General Purpose I/O (gpio) along the way.  These calls will be done from the command line of the Beagle, so there is no need for the host computer.
+
The [http://en.wikipedia.org/wiki/Hello_world_program "Hello World"] program is the traditional first program for many classes.  Flashing an LED is the embedded equivalent.  Here we will explore a few ways to flash an LED on the Beagle and explore General Purpose I/O (gpio) along the way.  These calls will be done from the command line of the Beagle, so there is no need for the host computer.
  
 
== gpio via the Shell Command Line and sysfs ==
 
== gpio via the Shell Command Line and sysfs ==
Line 10: Line 10:
 
('''Note''':  Draw the new diagrams with [http://engineersofthecorn.blogspot.com/2012/06/fritzing-part-for-beaglebone.html this].)
 
('''Note''':  Draw the new diagrams with [http://engineersofthecorn.blogspot.com/2012/06/fritzing-part-for-beaglebone.html this].)
  
The easiest way to do general purpose I/O (gpio) on the Beagle is through a terminal window and a shell prompt. In Linux, almost everything is treated as a file, even things that aren't files. In our class we'll use a virtual file system called '''sysfs'''.  sysfs exposes the drivers for the hardware so you get easily use them.
+
The easiest way to do general purpose I/O (gpio) on the Beagle is through a terminal window and a shell prompt. In Linux, almost everything is treated as a file, even things that aren't files. In our class we'll use a virtual file system called '''sysfs'''.  sysfs exposes the drivers for the hardware so you can easily use them.
  
 
Try this, open a terminal and type:
 
Try this, open a terminal and type:
Line 36: Line 36:
 
== Flashing the user LEDs ==
 
== Flashing the user LEDs ==
  
The Beagle Black has four user LEDS, '''user0''' - '''user3''', that you can control. Try this:
+
The Beagle Black has four user LEDS, '''usr0''' - '''usr3''', that you can control. Try this:
  
 
  beagle$ '''cd /sys/class/leds'''
 
  beagle$ '''cd /sys/class/leds'''
  beagle$ '''ls -F'''
+
  beagle$ '''ls -1F'''
  beaglebone:green:usr0  beaglebone:green:usr2
+
  beaglebone:green:usr0@
  beaglebone:green:usr1 beaglebone:green:usr3
+
  beaglebone:green:usr1@
 +
  beaglebone:green:usr2@
 +
  beaglebone:green:usr3@
  
Here you see the directories for controlling each of the usr LEDs. By default, usr0 flashes a heartbeat pattern and usr1 flashes when the micro SD card is accessed.  Let's control usr0.
+
Here you see the directories for controlling each of the user LEDs. By default, usr0 flashes a heartbeat pattern and usr1 flashes when the micro SD card is accessed.  Let's control usr0.
  
  beagle$ '''cd beagleboard\:\:usr0'''
+
  beagle$ '''cd beagleboard\:green\:usr0'''
 
  beagle$ '''ls -F'''
 
  beagle$ '''ls -F'''
 
  brightness  device@  max_brightness  power/  subsystem@  trigger  uevent
 
  brightness  device@  max_brightness  power/  subsystem@  trigger  uevent
Line 52: Line 54:
  
 
  beagle$ '''cat trigger'''
 
  beagle$ '''cat trigger'''
  none nand-disk mmc0 timer oneshot [heartbeat] backlight gpio cpu0 default-on transient
+
  none nand-disk mmc0 mmc1 timer oneshot [heartbeat] backlight gpio cpu0 default-on transient
  
 
This shows trigger can have many values.  The present value is '''heartbeat'''.  Check the LED, is it beating?  You can stop the heartbeat via:
 
This shows trigger can have many values.  The present value is '''heartbeat'''.  Check the LED, is it beating?  You can stop the heartbeat via:
Line 58: Line 60:
 
  beagle$ '''echo none > trigger'''
 
  beagle$ '''echo none > trigger'''
 
  beagle$ '''cat trigger'''
 
  beagle$ '''cat trigger'''
  [none] nand-disk mmc0 timer oneshot heartbeat backlight gpio cpu0 default-on transient  
+
  [none] nand-disk mmc0 mmc1 timer oneshot heartbeat backlight gpio cpu0 default-on transient  
  
 
Did it stop beating?  You can now turn it on and off with:
 
Did it stop beating?  You can now turn it on and off with:
Line 70: Line 72:
  
 
  beagle$ '''cat trigger'''
 
  beagle$ '''cat trigger'''
  [none] mmc0 timer heartbeat backlight gpio default-on  
+
  [none] nand-disk mmc0 mmc1 timer oneshot heartbeat backlight gpio cpu0 default-on transient
 
  beagle$ '''echo timer > trigger'''
 
  beagle$ '''echo timer > trigger'''
 
  beagle$ '''ls -F'''
 
  beagle$ '''ls -F'''
Line 81: Line 83:
  
 
== Adding your own LED ==
 
== Adding your own LED ==
 
 
It's not hard to use the gpio pins to control your own LED. All you need is an LED and a 220Ω resistor. Here's a picture of how it's wired. We are just doing the LED at the top of the breadboard for now.
 
It's not hard to use the gpio pins to control your own LED. All you need is an LED and a 220Ω resistor. Here's a picture of how it's wired. We are just doing the LED at the top of the breadboard for now.
  
Line 135: Line 136:
  
 
How can this work without a pulldown resistor? It turns out the Bone has an internal pulldown (and up) resistor that can be software enabled.  We'll discuss how when we cover device trees.
 
How can this work without a pulldown resistor? It turns out the Bone has an internal pulldown (and up) resistor that can be software enabled.  We'll discuss how when we cover device trees.
 
=== Challenge ===
 
 
* Can you modify the scripts above to read the switch and turn the LED on and off?
 
 
== Analog in ==
 
 
(This is based on [https://groups.google.com/forum/?fromgroups#!searchin/beagleboard/AIN/beagleboard/-ClhIXxtOds/rranYdwhS88J this].)
 
 
The bone has eight Analog Inputs.  Several are exposed on P9.  They are labeled '''AIN''' in table 11 above.  How many do you find?
 
 
The AIN pins are sampled at 12 bits and 100k samples per second.  The input voltage is between 0 and 1.8V.  Fortunately, both voltages are available on P9.
 
 
The photo above shows a small potentiometer wired to the bone.  One end goes to the analog ground (pin 34), the other analog 1.8V (pin 32). The wiper is attached to '''AIN5''' which is pin 36.
 
 
You interact with the analog in much like the gpio, but it appears in a different. We have to run a command before the AIN interface appears.  Just run them now, later we'll explain what you did.
 
 
beagle$ '''SLOTS=/sys/devices/bone_capemgr.*/slots'''
 
beagle$ '''PINS=/sys/kernel/debug/pinctrl/44e10800.pinmux/pins'''
 
beagle$ '''echo cape-bone-iio > $SLOTS'''
 
 
You can now access the analog interface, but where do they appear.  Try using the '''find''' command.
 
 
beagle$ '''find /sys -name "*AIN"'''
 
./devices/ocp.2/helper.14/AIN0
 
./devices/ocp.2/helper.14/AIN1
 
./devices/ocp.2/helper.14/AIN2
 
./devices/ocp.2/helper.14/AIN3
 
./devices/ocp.2/helper.14/AIN4
 
./devices/ocp.2/helper.14/AIN5
 
./devices/ocp.2/helper.14/AIN6
 
./devices/ocp.2/helper.14/AIN7
 
 
You paths may be slightly different. Now explore.
 
 
beagle$ '''cd /sys/devices/ocp.2/helper.14'''
 
beagle$ '''ls -F'''
 
AIN0  AIN2  AIN4  AIN6  driver@  power/      uevent
 
AIN1  AIN3  AIN5  AIN7  modalias  subsystem@
 
 
There are the various analog inputs, but watch out.  This interface starts numbering at '''1''' and Table 11 starts at '''0''', so to read AIN5 you need to look at '''ain6'''!
 
 
beagle$ '''cat AIN6'''
 
1185
 
 
Change the pot and rerun '''cat'''.  What's the min and max value you get?  Is it 12 bits?
 
 
=== Challenge ===
 
Rewrite the scripts from before to read an AIN pin and continuously display it's value.
 
 
== Assignment: gpio from the shell ==
 
 
=== <span style="color:green;">Measuring a gpio pin on an Oscilloscope</span> ===
 
 
Get an oscilloscope so you can measure the output of your gpio pins.  Run
 
beagle$ '''./togglegpio.sh 60 0.1'''
 
 
and answer the following questions about gpio measurements.
 
 
# What's the min and max voltage? 
 
# What period is it? 
 
# How close is it to 100ms? 
 
# Why do they differ?
 
# Run '''htop''' and see how much processor you are using.
 
# Try different values for the sleep time (2nd argument). What's the shortest period you can get? Make a table of the values you try and the corresponding period and processor usage.
 
# How stable is the period? 
 
# Try launching something like '''mplayer'''. How stable is the period?
 
# Try cleaning up togglegpio.sh and removing unneeded lines.  Does it impact the period?
 
# togglegpio uses bash (first line in file).  Try using sh.  Is the period shorter?
 
# What's the shortest period you can get?
 
 
=== Toggling the LEDs ===
 
 
Modify togglegpio.sh (call it toggleLED) to toggle the on-board LEDs.  Can you get the LED to appear to dim by changing the duty cycle of the toggling?
 
 
=== Count the User Button Presses ===
 
 
Write a shell script that displays a count of the number of times the Button has been pressed.
 
 
=== Copy gpio 130 to gpio 131 ===
 
 
Write a shell script that copies the value of gpio pin 130 to gpio pin 131.  How much CPU time does it take?  What's the delay from the time the input changes until the output changes?  How constant is the delay?
 
 
== Additional Exercises ==
 
 
=== Reading the Keyboard and Mouse ===
 
Try this:
 
 
beagle$ '''cd /sys/class/input'''
 
beagle$ '''ls -F'''
 
beagle$ '''evtest /dev/input/event2'''
 
Hit ctrl-C to stop
 
 
Now move your mouse around, or try you keyboard.  My mouse is plugged into the bottom left USB port and event2 responds to it.  Where do your keyboard and mouse appear?
 
 
== Resources ==
 
 
# [http://wh1t3s.com/2009/05/14/reading-beagleboard-gpio/ Here] is wh1ts article on flashing an LED.  It is referenced in the '''readgpio''' file that comes on the Beagle.
 
# [http://blog.makezine.com/archive/2009/02/blinking-leds-with-the-beagle-board.html?CMP=OTC-0D6B48984890 This] Make magazine article has a few more details.
 
# [http://www.avrfreaks.net/wiki/index.php/Documentation:Linux/GPIO#Getting_access_to_a_GPIO Here] in a gpio reference for Linux in general. It includes sample 'C' code for flashing at 1 Hz.
 
# [https://groups.google.com/forum/?hl=en#!msg/beagleboard/20rM-r8C2YY/hVZiN2ahI8YJ Here] is a posting in the Beagle Google group about gpio.
 
# [http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=blob;f=Documentation/gpio.txt;h=36af58eba136bac198ea3b1f33f34236be9ce5df;hb=HEAD Here] is some information about gpio from the kernel point of view.
 
# [http://wiki.gumstix.org/index.php?title=GPIO_Event_Driver Here] is some info on a GPIO Event Driver
 
# [https://www.ridgerun.com/developer/wiki/index.php/How_to_use_GPIO_signals Here] is info on how to set '''edge''' to falling and poll() the pin.
 
# [http://www.kernel.org/doc/Documentation/gpio.txt Here] is the kernel Documentation on gpio.
 
  
 
{{YoderFoot}}
 
{{YoderFoot}}

Latest revision as of 09:44, 3 September 2018

thumb‎ Embedded Linux Class by Mark A. Yoder


3.8 Kernel

This page is for the Bone (Black or White) running the 3.8 Kernel. See EBC_Exercise_10_Flashing_an_LED_-_xM_WhiteBone for the White Bone or xM running 3.2.

The "Hello World" program is the traditional first program for many classes. Flashing an LED is the embedded equivalent. Here we will explore a few ways to flash an LED on the Beagle and explore General Purpose I/O (gpio) along the way. These calls will be done from the command line of the Beagle, so there is no need for the host computer.

gpio via the Shell Command Line and sysfs

(Note: Draw the new diagrams with this.)

The easiest way to do general purpose I/O (gpio) on the Beagle is through a terminal window and a shell prompt. In Linux, almost everything is treated as a file, even things that aren't files. In our class we'll use a virtual file system called sysfs. sysfs exposes the drivers for the hardware so you can easily use them.

Try this, open a terminal and type:

beagle$ cd /sys
beagle$ ls -F
block/  bus/  class/  dev/  devices/  firmware/  fs/  kernel/  module/  power/

Here we see several directories that represent hardware we can control. Explore a bit and see what you find.

Now try:

beagle$ cd /sys/class
beagle$ ls -F
backlight/  firmware/     lcd/       mtd/           scsi_disk/   ubi/
bdi/        gpio/         leds/      net/           scsi_host/   udc/
block/      graphics/     mbox/      power_supply/  sound/       uio/
bluetooth/  hwmon/        mdio_bus/  regulator/     spi_master/  usbmon/
bsg/        i2c-adapter/  mem/       rfkill/        spidev/      vc/
dma/        i2c-dev/      misc/      rtc/           thermal/     vtconsole/
drm/        input/        mmc_host/  scsi_device/   tty/         watchdog/

Explore some. What do you find? In graphics you will see the frame buffer supported by the processor. In sound you'll see the alsa sound devices.

Flashing the user LEDs

The Beagle Black has four user LEDS, usr0 - usr3, that you can control. Try this:

beagle$ cd /sys/class/leds
beagle$ ls -1F
beaglebone:green:usr0@
beaglebone:green:usr1@
beaglebone:green:usr2@
beaglebone:green:usr3@

Here you see the directories for controlling each of the user LEDs. By default, usr0 flashes a heartbeat pattern and usr1 flashes when the micro SD card is accessed. Let's control usr0.

beagle$ cd beagleboard\:green\:usr0
beagle$ ls -F
brightness  device@  max_brightness  power/  subsystem@  trigger  uevent

See what's in brightness, max_brightness and trigger by using the cat command. For example:

beagle$ cat trigger
none nand-disk mmc0 mmc1 timer oneshot [heartbeat] backlight gpio cpu0 default-on transient

This shows trigger can have many values. The present value is heartbeat. Check the LED, is it beating? You can stop the heartbeat via:

beagle$ echo none > trigger
beagle$ cat trigger
[none] nand-disk mmc0 mmc1 timer oneshot heartbeat backlight gpio cpu0 default-on transient 

Did it stop beating? You can now turn it on and off with:

beagle$ echo 1 > brightness
beagle$ echo 0 > brightness

Is it responding correctly?

The Bone has more trigger options. Try:

beagle$ cat trigger
[none] nand-disk mmc0 mmc1 timer oneshot heartbeat backlight gpio cpu0 default-on transient 
beagle$ echo timer > trigger
beagle$ ls -F
brightness  delay_on  max_brightness  subsystem@  uevent
delay_off   device@   power/          trigger
beagle$ echo 100 > delay_on
beagle$ echo 900 > delay_off

What does this do?

Adding your own LED

It's not hard to use the gpio pins to control your own LED. All you need is an LED and a 220Ω resistor. Here's a picture of how it's wired. We are just doing the LED at the top of the breadboard for now.

Bone gpio.JPG BoneGPIO.png

So how do you know where to connect it? The BeagleBone System Reference Manual has the details. Figure 45 on page 74 shows:

BlackHeaders.jpg

There at two expansion headers, P8 and P9. Look at the bottom of the left header and you'll see it's labeled P9. Table 11 on page 78 shows the pinout for P9.

HeaderP9.jpg

On the first photo above you can see that pin 1 (Ground) is wired to the - bus and pin 3 (3.3V) is wired to the + bus. The 220Ω resistor is wired to the - bus and the other end is attached to the negative lead of the LED. The positive lead is attached to pin 12 which, as shown in Table 11, is attached to gpio1_28. The gpio pins are in banks of 32 each, so to find the gpio number to use on the Beagle, use 1*32+28=60. Here's how you turn it on

beagle$ cd /sys/class/gpio
beagle$ ls -F
export  gpiochip0@  gpiochip32@  gpiochip64@  gpiochip96@  unexport

Presently no gpio pins are visible. You need to tell it which pin to export

beagle$ echo 60 > export
beagle$ ls -F
export  gpio60@  gpiochip0@  gpiochip32@  gpiochip64@  gpiochip96@  unexport

Notice gpio60 has appeared. All we need to do is tell it which direction and then turn it on.

beagle$ cd gpio60
beagle$ echo out > direction
beagle$ echo 1 > value

Your LED should be on! When you are done you can unexport the pin and it will disappear.

beagle$ cd ..
beagle$ echo 60 > unexport

Reading a switch

Now that you have an LED working, wiring in a switch is easy. The picture above shows a push button switch wired in at the bottom of the P9 header. Attach the + bus to one pole on the switch with a wire. The other end of the switch is attached to pin 42 which is gpio0_7.

Based on what you saw above, show how to read the switch.

Once you have the switch and LED working you can use the following scripts to play with them.

beagle$ cd ~/exercises/gpio
beagle$ ./togglegpio.sh 60 0.1

The LED should be blinking on and off.

beagle$ ./readgpio.sh 7

Push the pushbutton and see what happens.

How can this work without a pulldown resistor? It turns out the Bone has an internal pulldown (and up) resistor that can be software enabled. We'll discuss how when we cover device trees.




thumb‎ Embedded Linux Class by Mark A. Yoder