Difference between revisions of "EBC Exercise 20 The Display SubSystem (DSS)"
m (→Part a - OSD Setup: Changed picture size)
(→Part b - Video Capture: Added video_thread())
|Line 89:||Line 89:|
* Change to the directory: lab07b_video_capture
* Change to the directory: lab07b_video_capture
* Examine the video files:
* Examine the video files:
Revision as of 09:14, 9 September 2011
This is the first of N labs that explore the video system drivers. The labs demonstrate the Linux V4L2 and FBdev drivers as well as basic file I/O, through four small applications: on-screen display (OSD), video recorder, video player, and video loop-thru (video-capture copied to video-display). It's based on the materials used in TI's DaVinci System Integration using Linux Workshop. The workshop is based on the DVEVM. I've converted those materials to the BeagleBoard.
This lab shows three ways to write directly to the framebuffer (/dev/fb0) on the Beagle:
- Write a single value to the entire framebuffer
- Write the pixel values based on a formula
- Read a bmp image and write it
The following labs will show how to bring in live video from a web cam via V4L2 and save it to a file, write video from a file to a video framebuffer (/dev/fb1), and finally move live video from a web cam to the framebuffer. A future lab may show how to process the video on the DSP before displaying it.
This is the first of 4 exercises:
- Part a: You will build an on-screen display for the your device using the FBDEV driver – INSPECTION LAB only.
- Part b: Examines v4L2 video capture via a simple video recorder application – INSPECTION LAB only.
- Part c: Examines the v4L2 display driver using via a video display application. This application plays back the file captured in lab 07b – INSPECTION LAB only.
- Part d: You will combine the recorder and player applications into a video loop-thru application using memcpy to transfer data between capture and display drivers.
- Part e: You will modify lab07d to perform video loop-thru via pointer passing between capture and display drivers. (More efficient)
Part a - OSD Setup
The goal of this part is to build an on_screen display for the Beagle using the FBDEV driver. From a coding perspective, it’s an inspection lab only.
- Create your own custom picture for the OSD window (using gimp), saving the picture to 32-bit format RGBA.
- Inspect video_thread.c and helper functions (inside video_osd.c).
- Build, run. Result: see your custom banner displayed on screen (no video yet…).
- Copy the VideoThru files from here to your Beagle.
- Change to the directory: VideoThru/lab07a_osd_setup
- Open the Gimp (open-source) paint program by typing “gimp Rose640x480a.bmp” in the terminal.
- Edit the file to create a custom banner picture.
This file is 640 (width) by 480 (height). All the code that follows assumes the image is this size. (You may change the size, but you'll also have to change the code.)
- Paint something for your OSD banner. You can create a simple graphic quickly using just three of the many tools.
- Before clicking any of the tools, you can choose a color first using the color box.
- Start with the gradient tool to create a background. Select the tool, then click and drag the mouse over the 640x80 image area.
- Add text or paint something over the gradient with either of these tools, respectively.
- Save your file and exit Gimp.
When you are finished, save with File:Save. Then exit Gimp. The file should save as RGBA, that is red, green blue, alpha. Where alpha is the transparency. It DOES matter what you name the file because later, during the building process, this file is specifically copied to the target. This name also makes it easy to remember it’s a 640x80 Bitmap image in 24-bit RGBA.
- Make sure your file is saved to your lab folder.
- List the contents of the lab folder
- Examine two of the video files.
video_osd.c contains a number of functions for manipulating the on-screen display. These functions are not part of an official package, but were developed for these lab exercises to demonstrate the capabilities of the on-screen display hardware.
- video_osd_place(): places a picture on the OSD display. Assumes data is provided in 32-bit ARGB (8-bit attribute transparency, 8-bit red, 8-bit blue 8-bit green per pixel).
- video_osd_scroll(): a more complex version of video_osd_place() that will offset the OSD display by x and/or y scroll values. This can be used to scroll a banner or picture horizontally or vertically.
- video_osd_circframe(): draws a circular alpha-blended frame around the video output.
The thread function in osd_thread.c is video_thread_fxn() which uses the helper functions from video_osd.c which supports alpha blending:
- calls video_osd_setup() to open the OSD window. This window is memory mapped (mmap’ed) into the application space and a handle to the Display object is returned and stored in osdFd.
- calls fopen() to read the custom banner picture (as created in gimp and stored in a 32-bit ARGB bitmap file).
- The OSD buffer is initialized by placing the picture buffer using video_osd_place(), which places the picture on the OSD window with a y offset of 200).
- Also a call is made to video_osd_circframe() to initialize the OSD buffer with a circular semi-transparent (0x80 is 75% transparency) green frame (0x0000FF is blue, 0x00FF00 is green, 0xFF0000 is red).
The application assumes the picture is supplied in a 640 x 80 32-bit ARGB (8-8-8-8) format, which should be the case if you followed the previous gimp instructions.
- Build and execute the application.
$ make debug $ ./videoThru_DEBUG.Beagle
What do you see?
Part a Questions
- How would you modify the lab07a_osd_setup application to make the banner you created semi-transparent instead of solid?
- How would you modify the lab07a_osd_setup application to place your banner at the top of the screen?
- (Advanced) Why is the osdFb preceded with an ampersand (&) in the call to video_osd_setup( &osdFd, FBVID_OSD, 0x40, &osdDisplay )?
Part b - Video Capture
The goal of Part b is to examine v4L2 video capture via a simple video recorder app. This is an Inspection lab only.
- Examine helper functions (setup, cleanup, wait_for_frame) in video_input.c.
- Examine video_thread_fxn() in video_thread.c.
- Examine main.c (how the signal handler is created/used, then calls video_thread_fxn).
- Build, run. Result: create a file (video.raw) that contains about 2s of captured video.
- Change to the directory: lab07b_video_capture
- Examine the video files:
This file contains a single function, video_thread_fxn(). This function encapsulates the functionality necessary to run the video recorder and is analogous to the audio_thread_fxn() that was used in the previous lab.
video_thread_fxn() utilizes the following:
- these function is used to detect the video standard which the web cam is using and calculate the corresponding buffer size of a single video frame. It opens and configures the Linux V4L2 video capture driver. The driver uses driver-allocated (as opposed to user-allocated) buffers that are mmapped to the user space to store video frames. Advanced users can take a look in video_input.c to see the details.
- Standard Linux I/O (i.e from #include <stdio.h>) call to open a file where the captured video data will be written
- for() loop
- Loops through 100 cycles so as not to overflow /tmp directory’s RAM memory
- ioctl( captureFd, VIDIOC_DQBUF, &v4l2buf ): dequeues the next video frame from the V4L2 driver (blocks/pauses if buffer is not available, yet).
- fwrite(): The video frame is copied into the file.
- ioctl( captureFd, VIDIOC_QBUF, &v4l2buf ): Once the application has finished writing the video buffer to the file, the buffer handle must be passed back to the driver so that it can be refilled with new video data.
This is the entry point for the application. main() does the following:
- Creates a signal handler to trap the Ctrl-C signal (also called SIGINT, the interrupt signal). When this signal is sent to the application, the videoEnv.quit global variable is set to true to signal the video thread to exit its main loop and begin cleanup.
- After configuring this signal handler, main() calls the video_thread_fxn() function to enter into the video thread. Upon completion of this function, main() checks the return value of the function (success or failure) and reports.