Please note that User Registration has been temporarily disabled due to a recent increase in automated registrations. If anyone needs an account, please request one here: RequestAccount. Thanks for your patience!--Wmat (talk)
Please email User:Wmat if you experience any issues with the Request Account form.

Difference between revisions of "ECE497 Beagle Bone WiFi"

From eLinux.org
Jump to: navigation, search
(Required Hardware)
(Required Package Updates)
Line 19: Line 19:
 
  beagle$ '''opkg install linux-firmware-rtl8192cu'''
 
  beagle$ '''opkg install linux-firmware-rtl8192cu'''
 
  bealge$ '''opkg install wireless-tools'''
 
  bealge$ '''opkg install wireless-tools'''
 
 
 
{{YoderFoot}}
 

Revision as of 20:44, 12 November 2012

thumb‎ Embedded Linux Class by Mark A. Yoder


This wiki is for anyone trying to use a WiFi adapter on the Beagle Bone. It is originally created by Michael Junge, EE senior at Rose-Hulman Institute of Technology, class of 2012. As new information is discovered please feel free to edit this wiki.

Required Hardware

You will need a WiFi adapter from Adafruit. (I had to buy mine, however as the class expands Dr. Yoder pay potentially have a few to hand out for experimentation.)

You will also need the A6 hardware version of the BeagleBone. This does not work with the A5 version. (again at a later date this may not be an issue)

You will finally need the A5 software version of Angstrom found from EBC Exercise 03 Installing a Beagle OS. Again make sure it is the A5 software, this does not work with the A6 Rev.

Finally you will need a 5V BeagleBone power supply. The power supply that comes with the Beagle XM Board is suffient as well.

Required Package Updates

When installing packages do not have the WiFi adapter plugged in.

beagle$ opkg update
beagle$ opkg install linux-firmware-rtl8192cu
bealge$ opkg install wireless-tools