Difference between revisions of "ECE497 Beagle VNS"

From eLinux.org
Jump to: navigation, search
(Executive Summary)
(Installation Instructions)
Line 21: Line 21:
 
Overall we are looking at creating a c program that will record the audio while the button is being pressed.  Once the button has been released the program will encode the raw audio into mp3 format, and then attach it via an email and send it to the owner of the Beagle VNS system.
 
Overall we are looking at creating a c program that will record the audio while the button is being pressed.  Once the button has been released the program will encode the raw audio into mp3 format, and then attach it via an email and send it to the owner of the Beagle VNS system.
  
== Installation Instructions ==
+
== Installation Instructions 1 ==
  
Give step by step instructions on how to install your project on the SPEd2 image. 
+
=== Software ===
  
* Include your [https://github.com/ github] path as a link like this:  [https://github.com/MarkAYoder/gitLearn https://github.com/MarkAYoder/gitLearn]. 
+
*github
* Include any additional packages installed via '''opkg'''.
+
 
* Include kernel mods.
+
*Python
* If there is extra hardware needed, include links to where it can be obtained.
+
 
 +
*GCC
 +
 
 +
*ALSA
 +
 
 +
*Lame
 +
 
 +
*GStreamer
 +
 
 +
*Email
 +
 
 +
== Installation Instructions 2 ==
 +
 
 +
=== Hardware ===
 +
 
 +
*BeagleBone
 +
 
 +
This project is design primarily for the BeagleBone, but could be implemented on any other Beagle Board given the proper driver installation for the USB hardware and available GPIOs. The BeagleBone is applicable for this project due to is small size, low power consumption, and networking capabilities. Make sure
 +
 
 +
*Camera
 +
 
 +
*Wifi Dongle
 +
 
 +
*Battery Pack
 +
 
 +
*Doorbell
 +
 
 +
*LED
  
 
== User Instructions ==
 
== User Instructions ==

Revision as of 03:55, 2 November 2012

thumb‎ Embedded Linux Class RHIT

by Tom Atnip, Kevin Geisler, Ruffin White


BeagleVNS.png

Team members: Tom Atnip, Kevin Geisler, Ruffin White


Executive Summary

Where is Dr. Yoder?
I'll leave him a message

We wanted a way for students to be able to leave audio (and possibly video) messages for professors when they are out of their office. Using a BeagleBoard Bone, we plan to connect a wireless USB device and a PlayStation Eye to achieve this. Students will be able to walk up to the device and press a button to record their message which will then be available for the professor.

At this time, we have a method for capturing audio for a specified amount of time and encoding that recording into a mp3 file. We also have python script that allows the user to send email messages to another email by running a script. We also have a working external power source for the beagle.

The wireless usb adapter does not work at this time. We are still trying to get recompile the kernel to install and enable the driver for this wireless adapter.


Overall we are looking at creating a c program that will record the audio while the button is being pressed. Once the button has been released the program will encode the raw audio into mp3 format, and then attach it via an email and send it to the owner of the Beagle VNS system.

Installation Instructions 1

Software

  • github
  • Python
  • GCC
  • ALSA
  • Lame
  • GStreamer
  • Email

Installation Instructions 2

Hardware

  • BeagleBone

This project is design primarily for the BeagleBone, but could be implemented on any other Beagle Board given the proper driver installation for the USB hardware and available GPIOs. The BeagleBone is applicable for this project due to is small size, low power consumption, and networking capabilities. Make sure

  • Camera
  • Wifi Dongle
  • Battery Pack
  • Doorbell
  • LED

User Instructions

Once everything is installed, how do you use the program? Give details here, so if you have a long user manual, link to it here.

Highlights

Here is where you brag about what your project can do.

Include a YouTube demo.

Theory of Operation

Give a high level overview of the structure of your software. Are you using GStreamer? Show a diagram of the pipeline. Are you running multiple tasks? Show what they do and how they interact.

Work Breakdown

List the major tasks in your project and who did what.

Also list here what doesn't work yet and when you think it will be finished and who is finishing it.


  1. Acquire Hardware - Ruffin
  2. Set up project page - Tom&Kevin
  3. Get USB wireless to work
  4. Get PlayStation Eye to work
  5. Get BeagleBoard Bone to run off a battery pack
  6. Register an email for the BeagleBoard
  7. Program stuff....
  8. Build stuff......

Future Work

Suggest addition things that could be done with this project.

  1. Flame decals
  2. Spoiler
  3. Bigger Engine
  4. Sentient

Parts

Beagle Bone

Conclusions

Give some concluding thoughts about the project. Suggest some future additions that could make it even more interesting.
Need More Cake



thumb‎ Embedded Linux Class RHIT

by Tom Atnip, Kevin Geisler, Ruffin White