Difference between revisions of "ECE497 Listings for Chapter 2--Yifei"

From eLinux.org
Jump to: navigation, search
(2-5, page 29, Hello Output for Beagle)
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
[[Category:ECE497old]]
 
 
 
=== 2-1, page 15, Initial Bootloader Serial Output ===
 
=== 2-1, page 15, Initial Bootloader Serial Output ===
 
<pre>
 
<pre>
Line 11: Line 9:
 
U-Boot 2011.03-rc1-00000-g9a3cc57-dirty (Apr 01 2011 - 17:41:42)
 
U-Boot 2011.03-rc1-00000-g9a3cc57-dirty (Apr 01 2011 - 17:41:42)
  
OMAP3630/3730-GP ES2.1, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
+
OMAP3630/3730-GP ES2.0, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
 
OMAP3 Beagle board + LPDDR/NAND
 
OMAP3 Beagle board + LPDDR/NAND
 
I2C:  ready
 
I2C:  ready
Line 22: Line 20:
 
Out:  serial
 
Out:  serial
 
Err:  serial
 
Err:  serial
Beagle xM Rev C
+
Beagle xM Rev A
Recognized Tincantools Trainer board (rev 0 0)
+
No EEPROM on expansion board
Die ID #397600029ff80000015f26ad0f01a010
+
Die ID #10c600011ff00000015739eb0800c018
Hit any key to stop autoboot:  0  
+
Hit any key to stop autoboot:  3 ��� 2 ��� 1 ��� 0  
OMAP3 beagleboard.org #
+
 
 
</pre>
 
</pre>
  
Line 42: Line 40:
 
Running uenvcmd ...
 
Running uenvcmd ...
 
Loading file "/boot/uImage" from mmc device 0:2 (xxa2)
 
Loading file "/boot/uImage" from mmc device 0:2 (xxa2)
3203088 bytes read
+
3144304 bytes read
 
Booting from mmc ...
 
Booting from mmc ...
 
## Booting kernel from Legacy Image at 80200000 ...
 
## Booting kernel from Legacy Image at 80200000 ...
   Image Name:  Angstrom/2.6.32/beagleboard
+
   Image Name:  Linux-2.6.32
 
   Image Type:  ARM Linux Kernel Image (uncompressed)
 
   Image Type:  ARM Linux Kernel Image (uncompressed)
   Data Size:    3203024 Bytes = 3.1 MiB
+
   Data Size:    3144240 Bytes = 3 MiB
 
   Load Address: 80008000
 
   Load Address: 80008000
 
   Entry Point:  80008000
 
   Entry Point:  80008000
Line 56: Line 54:
 
Starting kernel ...
 
Starting kernel ...
  
Uncompressing Linux................................................................................................................................................................................................................. done, booting the kernel.
+
Uncompressing Linux............................................................................................................................................................................................................ done, booting the kernel.
[    0.000000] Linux version 2.6.32 (koen@dominion) (gcc version 4.3.3 (GCC) ) #3 PREEMPT Tue May 10 10:06:15 CEST 2011
+
[    0.000000] Linux version 2.6.32 (beagle@ubu-may) (gcc version 4.5.4 20110917 (prerelease) (GCC) ) #4 PREEMPT Thu Dec 29 16:14:20 EST 2011
 
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
 
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
 
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
 
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Line 66: Line 64:
 
[    0.000000] Reserving 25165824 bytes SDRAM for VRAM
 
[    0.000000] Reserving 25165824 bytes SDRAM for VRAM
 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 122624
 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 122624
[    0.000000] Kernel command line: console=tty0 console=ttyS2,115200n8 consoleblank=0 mpurate=auto buddy=trainer camera=lbcm3m1 vram=24M omapfb.mode=dvi:hd720 mem=99M@0x80000000 mem=384M@0x88000000 omapfb.vram=0:12M,1:8M,2:4M omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait
+
[    0.000000] Kernel command line: console=tty0 console=ttyS2,115200n8 consoleblank=0 mpurate=auto buddy=none camera=lbcm3m1 vram=24M omapfb.mode=dvi:hd720 mem=99M@0x80000000 mem=384M@0x88000000 omapfb.vram=0:12M,1:8M,2:4M omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait
[    0.000000] Beagle expansionboard: trainer
+
[    0.000000] Beagle expansionboard: none
 
[    0.000000] Beagle cameraboard: lbcm3m1
 
[    0.000000] Beagle cameraboard: lbcm3m1
 
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
 
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
Line 73: Line 71:
 
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
 
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
 
[    0.000000] Memory: 99MB 384MB = 483MB total
 
[    0.000000] Memory: 99MB 384MB = 483MB total
[    0.000000] Memory: 458496KB available (5900K code, 673K data, 204K init, 0K highmem)
+
[    0.000000] Memory: 458624KB available (5760K code, 672K data, 196K init, 0K highmem)
 
[    0.000000] Hierarchical RCU implementation.
 
[    0.000000] Hierarchical RCU implementation.
 
[    0.000000] NR_IRQS:402
 
[    0.000000] NR_IRQS:402
Line 85: Line 83:
 
[    0.000000] Console: colour dummy device 80x30
 
[    0.000000] Console: colour dummy device 80x30
 
[    0.000000] console [tty0] enabled
 
[    0.000000] console [tty0] enabled
[    0.000000] Calibrating delay loop... 513.62 BogoMIPS (lpj=2007040)
+
[    0.000000] Calibrating delay loop... 508.37 BogoMIPS (lpj=1986560)
 
[    0.000000] Mount-cache hash table entries: 512
 
[    0.000000] Mount-cache hash table entries: 512
 
[    0.000000] CPU: Testing write buffer coherency: ok
 
[    0.000000] CPU: Testing write buffer coherency: ok
Line 92: Line 90:
 
[    0.000000] regulator: core version 0.5
 
[    0.000000] regulator: core version 0.5
 
[    0.000000] NET: Registered protocol family 16
 
[    0.000000] NET: Registered protocol family 16
[    0.000000] OMAP3 Beagle Rev: xM C
+
[    0.000000] OMAP3 Beagle Rev: xM A
 
[    0.000000] Beagle cameraboard: registering i2c2 bus for lbcm3m1
 
[    0.000000] Beagle cameraboard: registering i2c2 bus for lbcm3m1
[    0.000000] Beagle expansionboard: exporting GPIOs 130-141,162 to userspace
 
 
[    0.000000] Found NAND on CS0
 
[    0.000000] Found NAND on CS0
 
[    0.000000] Registering NAND on CS0
 
[    0.000000] Registering NAND on CS0
 
[    0.000000] Unable to get DVI reset GPIO
 
[    0.000000] Unable to get DVI reset GPIO
 
[    0.000000] omap_init_mbox: platform not supported
 
[    0.000000] omap_init_mbox: platform not supported
[ 1551.363037] OMAP DMA hardware revision 5.0
+
[22393.999969] OMAP DMA hardware revision 5.0
[ 1551.369598] bio: create slab <bio-0> at 0
+
[22394.006072] bio: create slab <bio-0> at 0
[ 1551.370880] SCSI subsystem initialized
+
[22394.007293] SCSI subsystem initialized
[ 1551.372283] usbcore: registered new interface driver usbfs
+
[22394.008636] usbcore: registered new interface driver usbfs
[ 1551.372467] usbcore: registered new interface driver hub
+
[22394.008789] usbcore: registered new interface driver hub
[ 1551.372680] usbcore: registered new device driver usb
+
[22394.008972] usbcore: registered new device driver usb
[ 1551.373046] i2c_omap i2c_omap.1: bus 1 rev4.0 at 2600 kHz
+
[22394.009399] i2c_omap i2c_omap.1: bus 1 rev4.0 at 2600 kHz
[ 1551.375701] twl4030: PIH (irq 7) chaining IRQs 368..375
+
[22394.012054] twl4030: PIH (irq 7) chaining IRQs 368..375
[ 1551.375762] twl4030: power (irq 373) chaining IRQs 376..383
+
[22394.012115] twl4030: power (irq 373) chaining IRQs 376..383
[ 1551.376037] twl4030: gpio (irq 368) chaining IRQs 384..401
+
[22394.012390] twl4030: gpio (irq 368) chaining IRQs 384..401
[ 1551.377807] regulator: VUSB1V5: 1500 mV normal standby
+
[22394.014099] regulator: VUSB1V5: 1500 mV normal standby
[ 1551.378112] regulator: VUSB1V8: 1800 mV normal standby
+
[22394.014343] regulator: VUSB1V8: 1800 mV normal standby
[ 1551.378356] regulator: VUSB3V1: 3100 mV normal standby
+
[22394.014587] regulator: VUSB3V1: 3100 mV normal standby
[ 1551.379638] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
+
[22394.015808] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[ 1551.380096] regulator: VMMC1: 1850 <--> 3150 mV normal standby
+
[22394.016265] regulator: VMMC1: 1850 <--> 3150 mV normal standby
[ 1551.380340] regulator: VDAC: 1800 mV normal standby
+
[22394.016540] regulator: VDAC: 1800 mV normal standby
[ 1551.380615] regulator: VPLL2: 1800 mV normal standby
+
[22394.016784] regulator: VPLL2: 1800 mV normal standby
[ 1551.380889] regulator: VSIM: 1800 <--> 3000 mV normal standby
+
[22394.017028] regulator: VSIM: 1800 <--> 3000 mV normal standby
[ 1551.381256] regulator: VAUX3: 1800 mV normal standby
+
[22394.017364] regulator: VAUX3: 1800 mV normal standby
[ 1551.381622] regulator: VAUX4: 1800 mV normal standby
+
[22394.017730] regulator: VAUX4: 1800 mV normal standby
[ 1551.381805] i2c_omap i2c_omap.2: bus 2 rev4.0 at 400 kHz
+
[22394.029235] i2c_omap i2c_omap.2: bus 2 rev4.0 at 400 kHz
[ 1551.391357] i2c_omap i2c_omap.3: bus 3 rev4.0 at 100 kHz
+
[22394.042480] i2c_omap i2c_omap.3: bus 3 rev4.0 at 100 kHz
[ 1551.392578] Switching to clocksource 32k_counter
+
[22394.043670] Switching to clocksource 32k_counter
[ 1551.401733] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
+
[22394.052429] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
[ 1551.405517] musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
+
[22394.056182] musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
[ 1551.405578] musb_hdrc musb_hdrc: MUSB HDRC host driver
+
[22394.056213] musb_hdrc musb_hdrc: MUSB HDRC host driver
[ 1551.405700] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
+
[22394.056365] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
[ 1551.405883] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
+
[22394.056518] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1551.405914] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
+
[22394.056549] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1551.405975] usb usb1: Product: MUSB HDRC host driver
+
[22394.056610] usb usb1: Product: MUSB HDRC host driver
[ 1551.406005] usb usb1: Manufacturer: Linux 2.6.32 musb-hcd
+
[22394.056640] usb usb1: Manufacturer: Linux 2.6.32 musb-hcd
[ 1551.406036] usb usb1: SerialNumber: musb_hdrc
+
[22394.056671] usb usb1: SerialNumber: musb_hdrc
[ 1551.406677] hub 1-0:1.0: USB hub found
+
[22394.057312] hub 1-0:1.0: USB hub found
[ 1551.406738] hub 1-0:1.0: 1 port detected
+
[22394.057373] hub 1-0:1.0: 1 port detected
[ 1551.407775] NET: Registered protocol family 2
+
[22394.058380] NET: Registered protocol family 2
[ 1551.408050] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
+
[22394.058624] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 1551.408660] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
+
[22394.059204] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 1551.409088] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
+
[22394.059661] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 1551.409332] TCP: Hash tables configured (established 16384 bind 16384)
+
[22394.059906] TCP: Hash tables configured (established 16384 bind 16384)
[ 1551.409362] TCP reno registered
+
[22394.059936] TCP reno registered
[ 1551.409393] UDP hash table entries: 256 (order: 0, 4096 bytes)
+
[22394.059967] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 1551.409454] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
+
[22394.060028] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 1551.409698] NET: Registered protocol family 1
+
[22394.060272] NET: Registered protocol family 1
[ 1551.410156] RPC: Registered udp transport module.
+
[22394.060729] RPC: Registered udp transport module.
[ 1551.410217] RPC: Registered tcp transport module.
+
[22394.060760] RPC: Registered tcp transport module.
[ 1551.410247] RPC: Registered tcp NFSv4.1 backchannel transport module.
+
[22394.060791] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1551.411132] omap-iommu omap-iommu.0: isp registered
+
[22394.061645] omap-iommu omap-iommu.0: isp registered
[ 1551.412872] VFS: Disk quotas dquot_6.5.2
+
[22394.063354] VFS: Disk quotas dquot_6.5.2
[ 1551.412994] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
+
[22394.063476] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1551.414093] squashfs: version 4.0 (2009/01/31) Phillip Lougher
+
[22394.064544] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1551.414916] JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
+
[22394.065338] JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[ 1551.415771] msgmni has been set to 896
+
[22394.066192] msgmni has been set to 896
[ 1551.419555] alg: No test for stdrng (krng)
+
[22394.069824] alg: No test for stdrng (krng)
[ 1551.419860] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
+
[22394.070129] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 1551.419921] io scheduler noop registered
+
[22394.070190] io scheduler noop registered
[ 1551.419952] io scheduler deadline registered
+
[22394.070220] io scheduler deadline registered
[ 1551.420104] io scheduler cfq registered (default)
+
[22394.070373] io scheduler cfq registered (default)
[ 1551.478790] OMAP DSS rev 2.0
+
[22394.129882] OMAP DSS rev 2.0
[ 1551.478881] OMAP DISPC rev 3.0
+
[22394.129974] OMAP DISPC rev 3.0
[ 1551.478942] OMAP VENC rev 2
+
[22394.130035] OMAP VENC rev 2
[ 1551.479187] OMAP DSI rev 1.0
+
[22394.130279] OMAP DSI rev 1.0
[ 1551.815734] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
+
[22394.466735] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1551.834197] serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654
+
[22394.484924] serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654
[ 1551.851959] serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654
+
[22394.502471] serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654
[ 1551.869659] serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654
+
[22394.519989] serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654
[ 1552.456451] console [ttyS2] enabled
+
[22395.101104] console [ttyS2] enabled
[ 1552.466857] brd: module loaded
+
[22395.111206] brd: module loaded
[ 1552.473175] loop: module loaded
+
[22395.117492] loop: module loaded
[ 1552.477752] omap2-nand driver initializing
+
[22395.122009] omap2-nand driver initializing
[ 1552.482238] No NAND device found!!!
+
[22395.126403] No NAND device found!!!
[ 1552.485900] No NAND device found!!!
+
[22395.130096] No NAND device found!!!
[ 1552.490447] usbcore: registered new interface driver catc
+
[22395.134582] usbcore: registered new interface driver catc
[ 1552.495971] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
+
[22395.140106] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
[ 1552.502044] usbcore: registered new interface driver kaweth
+
[22395.146209] usbcore: registered new interface driver kaweth
[ 1552.507720] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
+
[22395.151824] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
[ 1552.515380] usbcore: registered new interface driver pegasus
+
[22395.159484] usbcore: registered new interface driver pegasus
[ 1552.521118] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
+
[22395.165222] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
[ 1552.528167] usbcore: registered new interface driver rtl8150
+
[22395.172271] usbcore: registered new interface driver rtl8150
[ 1552.533966] usbcore: registered new interface driver asix
+
[22395.178070] usbcore: registered new interface driver asix
[ 1552.539489] usbcore: registered new interface driver cdc_ether
+
[22395.183593] usbcore: registered new interface driver cdc_ether
[ 1552.545501] usbcore: registered new interface driver dm9601
+
[22395.189575] usbcore: registered new interface driver dm9601
[ 1552.551269] usbcore: registered new interface driver smsc95xx
+
[22395.195312] usbcore: registered new interface driver smsc95xx
[ 1552.557159] usbcore: registered new interface driver gl620a
+
[22395.201232] usbcore: registered new interface driver gl620a
[ 1552.562866] usbcore: registered new interface driver net1080
+
[22395.206939] usbcore: registered new interface driver net1080
[ 1552.568664] usbcore: registered new interface driver plusb
+
[22395.212738] usbcore: registered new interface driver plusb
[ 1552.574310] usbcore: registered new interface driver rndis_host
+
[22395.218383] usbcore: registered new interface driver rndis_host
[ 1552.580383] usbcore: registered new interface driver cdc_subset
+
[22395.224456] usbcore: registered new interface driver cdc_subset
[ 1552.586425] usbcore: registered new interface driver zaurus
+
[22395.230499] usbcore: registered new interface driver zaurus
[ 1552.592163] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
+
[22395.236236] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 1552.600250] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+
[22395.244323] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1552.607147] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
+
[22395.251190] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 1552.613189] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 2
+
[22395.257232] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 2
[ 1552.620819] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
+
[22395.264862] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[ 1552.634948] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
+
[22395.286010] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[ 1552.640869] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
+
[22395.291900] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1552.647766] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
+
[22395.298797] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1552.655059] usb usb2: Product: OMAP-EHCI Host Controller
+
[22395.306121] usb usb2: Product: OMAP-EHCI Host Controller
[ 1552.660461] usb usb2: Manufacturer: Linux 2.6.32 ehci_hcd
+
[22395.311492] usb usb2: Manufacturer: Linux 2.6.32 ehci_hcd
[ 1552.665924] usb usb2: SerialNumber: ehci-omap.0
+
[22395.316955] usb usb2: SerialNumber: ehci-omap.0
[ 1552.671203] hub 2-0:1.0: USB hub found
+
[22395.322204] hub 2-0:1.0: USB hub found
[ 1552.675048] hub 2-0:1.0: 3 ports detected
+
[22395.326080] hub 2-0:1.0: 3 ports detected
[ 1552.705352] Initializing USB Mass Storage driver...
+
[22395.356445] Initializing USB Mass Storage driver...
[ 1552.710449] usbcore: registered new interface driver usb-storage
+
[22395.361541] usbcore: registered new interface driver usb-storage
[ 1552.716552] USB Mass Storage support registered.
+
[22395.367645] USB Mass Storage support registered.
[ 1552.721618] mice: PS/2 mouse device common for all mice
+
[22395.372680] mice: PS/2 mouse device common for all mice
[ 1552.727294] input: gpio-keys as /devices/platform/gpio-keys/input/input0
+
[22395.378326] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 1552.735137] input: twl4030_pwrbutton as /devices/platform/i2c_omap.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1
+
[22395.386169] input: twl4030_pwrbutton as /devices/platform/i2c_omap.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1
[ 1552.745910] i2c /dev entries driver
+
[22395.396911] i2c /dev entries driver
[ 1552.750030] Linux video capture interface: v2.00
+
[22395.401031] Linux video capture interface: v2.00
[ 1552.755004] omap-iommu omap-iommu.0: isp: version 1.1
+
[22395.406005] omap-iommu omap-iommu.0: isp: version 1.1
[ 1552.761749] vpfe_init
+
[22395.412689] vpfe_init
[ 1552.764648] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
+
[22395.415557] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[ 1552.771423] cpuidle: using governor ladder
+
[22395.422363] cpuidle: using governor ladder
[ 1552.775634] cpuidle: using governor menu
+
[22395.426574] cpuidle: using governor menu
[ 1552.885253] mmci-omap-hs mmci-omap-hs.1: err -16 configuring card detect
+
[22395.536285] mmci-omap-hs mmci-omap-hs.1: err -16 configuring card detect
[ 1552.892333] Registered led device: beagleboard::usr0
+
[22395.543365] Registered led device: beagleboard::usr0
[ 1552.897521] Registered led device: beagleboard::usr1
+
[22395.548522] Registered led device: beagleboard::usr1
[ 1552.904022] Registered led device: beagleboard::pmu_stat
+
[22395.555023] Registered led device: beagleboard::pmu_stat
[ 1552.911041] usbcore: registered new interface driver usbhid
+
[22395.562103] usbcore: registered new interface driver usbhid
[ 1552.916717] usbhid: USB HID core driver
+
[22395.567779] usbhid: USB HID core driver
[ 1552.920745] Advanced Linux Sound Architecture Driver Version 1.0.21.
+
[22395.571838] Advanced Linux Sound Architecture Driver Version 1.0.21.
[ 1552.927703] usbcore: registered new interface driver snd-usb-audio
+
[22395.578765] usbcore: registered new interface driver snd-usb-audio
[ 1553.003601] usb 2-2: new high speed USB device using ehci-omap and address 2
+
[22395.653930] usb 2-2: new high speed USB device using ehci-omap and address 2
[ 1553.011474] No device for DAI omap-mcbsp-dai-0
+
[22395.667388] No device for DAI omap-mcbsp-dai-0
[ 1553.015960] No device for DAI omap-mcbsp-dai-1
+
[22395.671905] No device for DAI omap-mcbsp-dai-1
[ 1553.020477] No device for DAI omap-mcbsp-dai-2
+
[22395.676422] No device for DAI omap-mcbsp-dai-2
[ 1553.024963] No device for DAI omap-mcbsp-dai-3
+
[22395.680938] No device for DAI omap-mcbsp-dai-3
[ 1553.029479] No device for DAI omap-mcbsp-dai-4
+
[22395.685455] No device for DAI omap-mcbsp-dai-4
[ 1553.034027] OMAP3 Beagle SoC init
+
[22395.689941] OMAP3 Beagle SoC init
[ 1553.038177] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
+
[22395.694122] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
[ 1553.049713] ALSA device list:
+
[22395.705291] ALSA device list:
[ 1553.052734]  #0: omap3beagle (twl4030)
+
[22395.708374]  #0: omap3beagle (twl4030)
[ 1553.056732] oprofile: using arm/armv7
+
[22395.712341] oprofile: using arm/armv7
[ 1553.060699] TCP cubic registered
+
[22395.716278] TCP cubic registered
[ 1553.063964] NET: Registered protocol family 17
+
[22395.719573] NET: Registered protocol family 17
[ 1553.068572] NET: Registered protocol family 15
+
[22395.724151] NET: Registered protocol family 15
[ 1553.073181] lib80211: common routines for IEEE802.11 drivers
+
[22395.728698] lib80211: common routines for IEEE802.11 drivers
[ 1553.078918] ThumbEE CPU extension supported.
+
[22395.734466] ThumbEE CPU extension supported.
[ 1553.083282] Power Management for TI OMAP3.
+
[22395.738800] Power Management for TI OMAP3.
[ 1553.088714] SmartReflex driver initialized
+
[22395.744171] SmartReflex driver initialized
[ 1553.092987] omap3beaglelmb: Driver registration complete
+
[22395.748504] omap3beaglelmb: Driver registration complete
[ 1553.106903] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
+
[22395.761932] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 1553.115173] registered taskstats version 1
+
[22395.770202] registered taskstats version 1
[ 1553.182495] usb 2-2: New USB device found, idVendor=0424, idProduct=9514
+
[22395.833557] usb 2-2: New USB device found, idVendor=0424, idProduct=9514
[ 1553.189300] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
+
[22395.840362] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1553.197296] hub 2-2:1.0: USB hub found
+
[22395.848327] hub 2-2:1.0: USB hub found
[ 1553.201385] hub 2-2:1.0: 5 ports detected
+
[22395.852355] hub 2-2:1.0: 5 ports detected
[ 1553.275512] mmc0: host does not support reading read-only switch. assuming write-enable.
+
[22395.958404] Console: switching to colour frame buffer device 160x45
[ 1553.283721] mmc0: new high speed SDHC card at address 1234
+
[22395.977630] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 1553.289611] mmcblk0: mmc0:1234 SA04G 3.67 GiB  
+
[22395.986053] mmc0: new high speed SDHC card at address e624
[ 1553.307678] Console: switching to colour frame buffer device 160x45
+
[22395.992187] mmcblk0: mmc0:e624 SU08G 7.40 GiB  
[ 1553.327545]  mmcblk0: p1 p2
+
[22395.997222]  mmcblk0:
[ 1553.333892] regulator_init_complete: incomplete constraints, leaving VAUX4 on
+
[22396.001953] regulator_init_complete: incomplete constraints, leaving VAUX4 on
[ 1553.341491] regulator_init_complete: incomplete constraints, leaving VAUX3 on
+
[22396.009674]  p1 p2
[ 1553.349334] regulator_init_complete: incomplete constraints, leaving VDAC on
+
[22396.012573] regulator_init_complete: incomplete constraints, leaving VAUX3 on
[ 1553.357391] omap_vout omap_vout: probed for an unknown device
+
[22396.020416] regulator_init_complete: incomplete constraints, leaving VDAC on
[ 1553.369812] EXT3-fs (mmcblk0p2): warning: maximal mount count reached, running e2fsck is recommended
+
[22396.028472] omap_vout omap_vout: probed for an unknown device
[ 1553.379333] kjournald starting.  Commit interval 5 seconds
+
[22396.044433] EXT3-fs (mmcblk0p2): warning: maximal mount count reached, running e2fsck is recommended
[ 1553.392669] EXT3-fs (mmcblk0p2): using internal journal
+
[22396.053924] kjournald starting.  Commit interval 5 seconds
[ 1553.398101] EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode
+
[22396.072601] EXT3-fs (mmcblk0p2): using internal journal
[ 1553.405456] VFS: Mounted root (ext3 filesystem) on device 179:2.
+
[22396.081604] EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode
[ 1553.416168] devtmpfs: mounted
+
[22396.092468] VFS: Mounted root (ext3 filesystem) on device 179:2.
[ 1553.422851] Freeing init memory: 204K
+
[22396.108184] devtmpfs: mounted
[ 1553.533721] usb 2-2.1: new high speed USB device using ehci-omap and address 3
+
[22396.114929] Freeing init memory: 196K
 +
[22396.184783] usb 2-2.1: new high speed USB device using ehci-omap and address 3
 +
 
 
INIT: version 2.86 booting
 
INIT: version 2.86 booting
[ 1553.659179] usb 2-2.1: New USB device found, idVendor=0424, idProduct=ec00
+
 
[ 1553.670410] usb 2-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
+
[22396.309906] usb 2-2.1: New USB device found, idVendor=0424, idProduct=ec00
[ 1553.684997] smsc95xx v1.0.4
+
[22396.320922] usb 2-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1553.753906] usb0: register 'smsc95xx' at usb-ehci-omap.0-2.1, smsc95xx USB 2.0 Ethernet, 5a:6b:7e:83:01:7d
+
[22396.336395] smsc95xx v1.0.4
[ 1553.854095] usb 2-2.2: new high speed USB device using ehci-omap and address 4
+
[22396.401306] usb0: register 'smsc95xx' at usb-ehci-omap.0-2.1, smsc95xx USB 2.0 Ethernet, 9a:90:a2:eb:2d:7e
 
Please wait: booting...
 
Please wait: booting...
 
Starting udev
 
Starting udev
[ 1554.000518] usb 2-2.2: New USB device found, idVendor=0b95, idProduct=7720
+
[22396.653747] usb 2-2.2: new high speed USB device using ehci-omap and address 4
[ 1554.012084] usb 2-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
+
[22396.781158] usb 2-2.2: New USB device found, idVendor=1415, idProduct=2000
[ 1554.023956] usb 2-2.2: Product: AX88772
+
[22396.801727] usb 2-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1554.032348] usb 2-2.2: Manufacturer: ASIX Elec. Corp.
+
[22396.825225] usb 2-2.2: Product: USB Camera-B4.04.27.1
[ 1554.042266] usb 2-2.2: SerialNumber: 000001
+
[22396.845581] usb 2-2.2: Manufacturer: OmniVision Technologies, Inc.
[ 1554.890899] eth0: register 'asix' at usb-ehci-omap.0-2.2, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:06:c4:57
+
[22396.950500] usb 2-2.3: new high speed USB device using ehci-omap and address 5
[ 1555.316528] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
+
[22397.031524] udev: starting version 151
[ 1555.752227] usb 2-2.3: new high speed USB device using ehci-omap and address 5
+
[22397.089172] usb 2-2.3: New USB device found, idVendor=0b95, idProduct=7720
[ 1556.591064] usb 2-2.3: New USB device found, idVendor=1415, idProduct=2000
+
[22397.292785] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1556.747467] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
+
[22397.818115] usb 2-2.3: Product: AX88772
[ 1556.782348] usb 2-2.3: Product: USB Camera-B4.04.27.1
+
[22398.287506] gspca: main v2.8.0 registered
[ 1556.792510] usb 2-2.3: Manufacturer: OmniVision Technologies, Inc.
+
[22398.408355] usb 2-2.3: Manufacturer: ASIX Elec. Corp.
[ 1556.891815] gspca: main v2.8.0 registered
+
[22398.639282] gspca: probing 1415:2000
[ 1556.912536] usb 2-2.4: new low speed USB device using ehci-omap and address 6
+
[22398.782592] usb 2-2.3: SerialNumber: 000001
[ 1556.932342] gspca: probing 1415:2000
+
[ 1557.069854] usb 2-2.4: New USB device found, idVendor=046d, idProduct=c016
+
[ 1557.082977] usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
+
[ 1557.095520] usb 2-2.4: Product: Optical USB Mouse
+
[ 1557.105316] usb 2-2.4: Manufacturer: Logitech
+
[ 1557.118957] ov534: Sensor ID: 7721
+
[ 1557.132659] input: Logitech Optical USB Mouse as /devices/platform/ehci-omap.0/usb2/2-2/2-2.4/2-2.4:1.0/input/input2
+
[ 1557.192199] generic-usb 0003:046D:C016.0001: input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-ehci-omap.0-2.4/input0
+
[ 1557.240783] ov534: frame_rate: 30
+
[ 1557.262695] gspca: /dev/video0 created
+
[ 1557.304016] usbcore: registered new interface driver ov534
+
[ 1557.341369] ov534: registered
+
[ 1557.377960] usb 2-2.5: new low speed USB device using ehci-omap and address 7
+
[ 1557.578521] usb 2-2.5: New USB device found, idVendor=04f3, idProduct=0103
+
[ 1557.603027] usb 2-2.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
+
[ 1557.634033] input: HID 04f3:0103 as /devices/platform/ehci-omap.0/usb2/2-2/2-2.5/2-2.5:1.0/input/input3
+
[ 1557.694244] generic-usb 0003:04F3:0103.0002: input: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-ehci-omap.0-2.5/input0
+
[ 1557.749481] input: HID 04f3:0103 as /devices/platform/ehci-omap.0/usb2/2-2/2-2.5/2-2.5:1.1/input/input4
+
[ 1557.829162] generic-usb 0003:04F3:0103.0003: input: USB HID v1.10 Device [HID 04f3:0103] on usb-ehci-omap.0-2.5/input1
+
 
Remounting root file system...
 
Remounting root file system...
 +
[22398.906860] ov534: Sensor ID: 7721
 +
[22398.995330] ov534: frame_rate: 30
 +
[22399.004089] gspca: /dev/video0 created
 +
[22399.014282] usbcore: registered new interface driver ov534
 +
[22399.024261] ov534: registered
 
Caching udev devnodes
 
Caching udev devnodes
 
Populating dev cache
 
Populating dev cache
[ 1572.894226] Bluetooth: Core ver 2.15
+
[22399.603393] Bluetooth: Core ver 2.15
[ 1572.904296] NET: Registered protocol family 31
+
[22399.612976] NET: Registered protocol family 31
[ 1572.914123] Bluetooth: HCI device and connection manager initialized
+
[22399.622619] Bluetooth: HCI device and connection manager initialized
[ 1572.925842] Bluetooth: HCI socket layer initialized
+
[22399.633453] Bluetooth: HCI socket layer initialized
[ 1572.953735] Bluetooth: L2CAP ver 2.14
+
[22399.665588] Bluetooth: L2CAP ver 2.14
[ 1572.962768] Bluetooth: L2CAP socket layer initialized
+
[22399.674407] Bluetooth: L2CAP socket layer initialized
[ 1572.991455] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
+
[22399.705413] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1573.115783] NET: Registered protocol family 10
+
[22399.745269] eth0: register 'asix' at usb-ehci-omap.0-2.3, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0a:21:18
[ 1573.192199] NET: Registered protocol family 23
+
[22399.791259] udev: renamed network interface eth0 to eth1
[ 1573.221649] IrCOMM protocol (Dag Brattli)
+
[22399.888122] usb 2-2.4: new low speed USB device using ehci-omap and address 6
[ 1573.332153] Bluetooth: RFCOMM TTY layer initialized
+
[22399.996948] NET: Registered protocol family 10
[ 1573.342224] Bluetooth: RFCOMM socket layer initialized
+
[22400.064605] usb 2-2.4: New USB device found, idVendor=045e, idProduct=00cb
[ 1573.352325] Bluetooth: RFCOMM ver 1.11
+
[22400.090820] usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
 +
[22400.113952] usb 2-2.4: Product: Microsoft Basic Optical Mouse v2.0
 +
[22400.125549] NET: Registered protocol family 23
 +
[22400.136352] usb 2-2.4: Manufacturer: Microsoft
 +
[22400.159423] input: Microsoft  Microsoft Basic Optical Mouse v2.0  as /devices/platform/ehci-omap.0/usb2/2-2/2-2.4/2-2.4:1.0/input/input2
 +
[22400.214202] IrCOMM protocol (Dag Brattli)
 +
[22400.233917] generic-usb 0003:045E:00CB.0001: input: USB HID v1.11 Mouse [Microsoft  Microsoft Basic Optical Mouse v2.0 ] on usb-ehci-omap.0-2.4/input0
 +
[22400.399627] Bluetooth: RFCOMM TTY layer initialized
 +
[22400.409423] Bluetooth: RFCOMM socket layer initialized
 +
[22400.419250] Bluetooth: RFCOMM ver 1.11
 +
[22400.427490] usb 2-2.5: new low speed USB device using ehci-omap and address 7
 +
[22400.567504] usb 2-2.5: New USB device found, idVendor=045e, idProduct=0750
 +
[22400.583007] usb 2-2.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
 +
[22400.595001] usb 2-2.5: Product: Wired Keyboard 600
 +
[22400.604217] usb 2-2.5: Manufacturer: Microsoft
 +
[22400.630645] input: Microsoft Wired Keyboard 600 as /devices/platform/ehci-omap.0/usb2/2-2/2-2.5/2-2.5:1.0/input/input3
 +
[22400.700561] generic-usb 0003:045E:0750.0002: input: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-ehci-omap.0-2.5/input0
 +
[22400.784606] input: Microsoft Wired Keyboard 600 as /devices/platform/ehci-omap.0/usb2/2-2/2-2.5/2-2.5:1.1/input/input4
 +
[22400.856506] generic-usb 0003:045E:0750.0003: input: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-ehci-omap.0-2.5/input1
 
ALSA: Restoring mixer settings...
 
ALSA: Restoring mixer settings...
 
Cleaning: /etc/network/run/ifstate.
 
Cleaning: /etc/network/run/ifstate.
Line 325: Line 328:
 
/usr/sbin/alsactl: parse:1655: Unable to open file '/usr/share/alsa/init/00main': No such file or directory
 
/usr/sbin/alsactl: parse:1655: Unable to open file '/usr/share/alsa/init/00main': No such file or directory
 
No state is present for card CameraB404271
 
No state is present for card CameraB404271
Configuring network interfaces... [ 1575.066680] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
+
Configuring network interfaces... eth0: unknown interface: No such device
eth0      no wireless extensions.
+
eth0: unknown interface: No such device
 +
eth0      No such device
  
[ 1575.290283] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
 
 
Internet Systems Consortium DHCP Client 4.1.1-P1
 
Internet Systems Consortium DHCP Client 4.1.1-P1
 
Copyright 2004-2010 Internet Systems Consortium.
 
Copyright 2004-2010 Internet Systems Consortium.
Line 334: Line 337:
 
For info, please visit https://www.isc.org/software/dhcp/
 
For info, please visit https://www.isc.org/software/dhcp/
  
Listening on LPF/eth0/00:50:b6:06:c4:57
+
SIOCSIFADDR: No such device
Sending on  LPF/eth0/00:50:b6:06:c4:57
+
eth0: unknown interface: No such device
Sending on  Socket/fallback
+
eth0: unknown interface: No such device
DHCPREQUEST on eth0 to 255.255.255.255 port 67
+
Bind socket to interface: No such device
DHCPACK from 137.112.41.2
+
 
bound to 137.112.41.87 -- renewal in 1567 seconds.
+
If you did not get this software from ftp.isc.org, please
 +
get the latest from ftp.isc.org and install that before
 +
requesting help.
 +
 
 +
If you did get this software from ftp.isc.org and have not
 +
yet read the README, please read it before requesting help.
 +
If you intend to request help from the dhcp-server@isc.org
 +
mailing list, please read the section on the README about
 +
submitting bug reports and requests for help.
 +
 
 +
Please do not under any circumstances send requests for
 +
help directly to the authors of this software - please
 +
send them to the appropriate mailing list as described in
 +
the README file.
 +
 
 +
exiting.
 +
Failed to bring up eth0.
 
usb0      no wireless extensions.
 
usb0      no wireless extensions.
  
Line 347: Line 366:
 
For info, please visit https://www.isc.org/software/dhcp/
 
For info, please visit https://www.isc.org/software/dhcp/
  
Listening on LPF/usb0/22:b8:c4:7d:a8:50
+
Listening on LPF/usb0/7e:3d:60:0e:c7:a2
Sending on  LPF/usb0/22:b8:c4:7d:a8:50
+
Sending on  LPF/usb0/7e:3d:60:0e:c7:a2
 
Sending on  Socket/fallback
 
Sending on  Socket/fallback
 
DHCPREQUEST on usb0 to 255.255.255.255 port 67
 
DHCPREQUEST on usb0 to 255.255.255.255 port 67
DHCPDISCOVER on usb0 to 255.255.255.255 port 67 interval 5
+
DHCPREQUEST on usb0 to 255.255.255.255 port 67
DHCPDISCOVER on usb0 to 255.255.255.255 port 67 interval 14
+
DHCPDISCOVER on usb0 to 255.255.255.255 port 67 interval 3
DHCPDISCOVER on usb0 to 255.255.255.255 port 67 interval 16
+
DHCPDISCOVER on usb0 to 255.255.255.255 port 67 interval 7
[ 1614.207458] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
+
DHCPDISCOVER on usb0 to 255.255.255.255 port 67 interval 7
DHCPDISCOVER on usb0 to 255.255.255.255 port 67 interval 9
+
DHCPDISCOVER on usb0 to 255.255.255.255 port 67 interval 10
 
DHCPDISCOVER on usb0 to 255.255.255.255 port 67 interval 11
 
DHCPDISCOVER on usb0 to 255.255.255.255 port 67 interval 11
DHCPDISCOVER on usb0 to 255.255.255.255 port 67 interval 6
+
DHCPDISCOVER on usb0 to 255.255.255.255 port 67 interval 13
 +
[22460.296112] usb 2-2.4: USB disconnect, address 6
 +
[22461.817718] usb 2-2.4: new low speed USB device using ehci-omap and address 8
 +
[22461.947753] usb 2-2.4: New USB device found, idVendor=045e, idProduct=00cb
 +
[22461.959808] usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
 +
[22461.972229] usb 2-2.4: Product: Microsoft Basic Optical Mouse v2.0
 +
[22461.983642] usb 2-2.4: Manufacturer: Microsoft
 +
[22462.001617] input: Microsoft  Microsoft Basic Optical Mouse v2.0  as /devices/platform/ehci-omap.0/usb2/2-2/2-2.4/2-2.4:1.0/input/input5
 +
[22462.054229] generic-usb 0003:045E:00CB.0004: input: USB HID v1.11 Mouse [Microsoft  Microsoft Basic Optical Mouse v2.0 ] on usb-ehci-omap.0-2.4/input0
 +
DHCPDISCOVER on usb0 to 255.255.255.255 port 67 interval 8
 +
DHCPDISCOVER on usb0 to 255.255.255.255 port 67 interval 2
 
No DHCPOFFERS received.
 
No DHCPOFFERS received.
 +
Trying recorded lease 192.168.1.104
 +
PING 192.168.1.1 (192.168.1.1): 56 data bytes
 +
64 bytes from 192.168.1.104: Destination Host Unreachable
 +
Vr HL TOS  Len  ID Flg  off TTL Pro  cks      Src      Dst Data
 +
4  5  00 5400 0000  0 0040  40  01 efb6 192.168.1.104  192.168.1.1
 +
--- 192.168.1.1 ping statistics ---
 +
1 packets transmitted, 0 packets received, 100% packet loss
 
No working leases in persistent database - sleeping.
 
No working leases in persistent database - sleeping.
 
done.
 
done.
Line 364: Line 400:
 
net.ipv4.conf.default.rp_filter = 1
 
net.ipv4.conf.default.rp_filter = 1
 
net.ipv4.conf.all.rp_filter = 1
 
net.ipv4.conf.all.rp_filter = 1
 +
hwclock: can't open '/dev/misc/rtc': No such file or directory
 +
Tue Oct  4 01:58:00 BST 2011
 +
hwclock: can't open '/dev/misc/rtc': No such file or directory
 +
 
INIT: Entering runlevel: 5
 
INIT: Entering runlevel: 5
 +
 
Starting system message bus: dbus.
 
Starting system message bus: dbus.
 
Starting Hardware abstraction layer hald
 
Starting Hardware abstraction layer hald
Line 379: Line 420:
 
Starting internet superserver: xinetd.
 
Starting internet superserver: xinetd.
 
  * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
 
  * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[ ok ]
+
�[A�[74G[ ok ]
 
Starting Network connection manager daemon: NetworkManager.
 
Starting Network connection manager daemon: NetworkManager.
 
Starting PVR
 
Starting PVR
 +
[22488.673706] eth1: link up, 100Mbps, full-duplex, lpa 0x41E1
 +
[22488.848663] eth1: link up, 100Mbps, full-duplex, lpa 0x41E1
 
cups: started scheduler.
 
cups: started scheduler.
 
Starting GNOME Display Manager gdm
 
Starting GNOME Display Manager gdm
Line 398: Line 441:
 
Angstrom 2010.7-test-20110220 beagleboard ttyS2
 
Angstrom 2010.7-test-20110220 beagleboard ttyS2
  
beagleboard login: root
 
Last login: Thu Dec 29 17:12:23 GMT 2011 from 137.112.41.109 on pts/0
 
root@beagleboard:~#
 
 
</pre>
 
</pre>
  
Line 407: Line 447:
 
  root@beagleboard:~# '''shutdown -r now'''
 
  root@beagleboard:~# '''shutdown -r now'''
 
<pre>
 
<pre>
�Broadcast message from root (ttyS2) (Thu Dec 29 16:02:35 2011):
+
Broadcast message from root (ttyS2) (Tue Oct  4 01:58:15 2011):
 
+
 
The system is going down for reboot NOW!
 
The system is going down for reboot NOW!
INIT: INIT: Sending processes the TERM signal
+
 
 +
 
 +
INIT:  
 +
INIT: Sending processes the TERM signal
 +
 
 
Deconfiguring leds:
 
Deconfiguring leds:
 
   beagleboard::pmu_stat: no trigger
 
   beagleboard::pmu_stat: no trigger
Line 417: Line 460:
 
Stopping Dropbear SSH server: dropbear.
 
Stopping Dropbear SSH server: dropbear.
 
  * Stopping Avahi mDNS/DNS-SD Daemon: avahi-daemon
 
  * Stopping Avahi mDNS/DNS-SD Daemon: avahi-daemon
[ ok ]
+
�[A�[74G[ ok ]
 
Stopping advanced power management daemon: No /usr/sbin/apmd found running; none killed.
 
Stopping advanced power management daemon: No /usr/sbin/apmd found running; none killed.
 
apmd.
 
apmd.
Line 434: Line 477:
 
For info, please visit https://www.isc.org/software/dhcp/
 
For info, please visit https://www.isc.org/software/dhcp/
  
Listening on LPF/usb0/92:93:b0:18:e8:b6
+
Listening on LPF/usb0/aa:db:5c:9e:a0:a0
Sending on  LPF/usb0/92:93:b0:18:e8:b6
+
Sending on  LPF/usb0/aa:db:5c:9e:a0:a0
 
Sending on  Socket/fallback
 
Sending on  Socket/fallback
 
DHCPRELEASE on usb0 to 192.168.1.1 port 67
 
DHCPRELEASE on usb0 to 192.168.1.1 port 67
send_packet: Network is unreachable
 
send_packet: please consult README file regarding broadcast address.
 
 
done.
 
done.
 
Stopping PVR
 
Stopping PVR
Line 450: Line 491:
 
Deactivating swap...
 
Deactivating swap...
 
Unmounting local filesystems...
 
Unmounting local filesystems...
Rebooting... [67884.488464] Restarting system.
+
Rebooting... [22385.076416] Restarting system.
 
</pre>
 
</pre>
  
Line 488: Line 529:
  
 
<pre>
 
<pre>
[67895.991638] usb 2-2.2: device descriptor read/64, error 18
+
[22396.092468] VFS: Mounted root (ext3 filesystem) on device 179:2.
[67896.002227] devtmpfs: mounted
+
[22396.108184] devtmpfs: mounted
[67896.009552] Freeing init memory: 204K
+
[22396.114929] Freeing init memory: 196K
 +
[22396.184783] usb 2-2.1: new high speed USB device using ehci-omap and address 3
 +
 
 
INIT: version 2.86 booting
 
INIT: version 2.86 booting
[67896.202636] usb 2-2.2: device descriptor read/64, error 18
+
 
 +
[22396.309906] usb 2-2.1: New USB device found, idVendor=0424, idProduct=ec00
 +
[22396.320922] usb 2-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
 +
[22396.336395] smsc95xx v1.0.4
 +
[22396.401306] usb0: register 'smsc95xx' at usb-ehci-omap.0-2.1, smsc95xx USB 2.0 Ethernet, 9a:90:a2:eb:2d:7e
 
Please wait: booting...
 
Please wait: booting...
 
Starting udev
 
Starting udev

Latest revision as of 01:57, 17 January 2012

2-1, page 15, Initial Bootloader Serial Output

Texas Instruments X-Loader 1.5.0 (Mar 27 2011 - 17:37:56)
Beagle xM
Reading boot sector
Loading u-boot.bin from mmc


U-Boot 2011.03-rc1-00000-g9a3cc57-dirty (Apr 01 2011 - 17:41:42)

OMAP3630/3730-GP ES2.0, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
OMAP3 Beagle board + LPDDR/NAND
I2C:   ready
DRAM:  512 MiB
NAND:  0 MiB
MMC:   OMAP SD/MMC: 0
*** Warning - readenv() failed, using default environment

In:    serial
Out:   serial
Err:   serial
Beagle xM Rev A
No EEPROM on expansion board
Die ID #10c600011ff00000015739eb0800c018
Hit any key to stop autoboot:  3 ��� 2 ��� 1 ��� 0 

2-2, page 16, Loading the Linux Kernel

OMAP3 beagleboard.org # boot
The user button is currently NOT pressed.
SD/MMC found on device 0
reading uEnv.txt

191 bytes read
Loaded environment from uEnv.txt
Importing environment from mmc ...
Running uenvcmd ...
Loading file "/boot/uImage" from mmc device 0:2 (xxa2)
3144304 bytes read
Booting from mmc ...
## Booting kernel from Legacy Image at 80200000 ...
   Image Name:   Linux-2.6.32
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3144240 Bytes = 3 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux............................................................................................................................................................................................................ done, booting the kernel.
[    0.000000] Linux version 2.6.32 (beagle@ubu-may) (gcc version 4.5.4 20110917 (prerelease) (GCC) ) #4 PREEMPT Thu Dec 29 16:14:20 EST 2011
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine: OMAP3 Beagle Board
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] OMAP3630/DM3730 ES1.0 (l2cache iva sgx neon isp 192mhz_clk )
[    0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
[    0.000000] Reserving 25165824 bytes SDRAM for VRAM
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 122624
[    0.000000] Kernel command line: console=tty0 console=ttyS2,115200n8 consoleblank=0 mpurate=auto buddy=none camera=lbcm3m1 vram=24M omapfb.mode=dvi:hd720 mem=99M@0x80000000 mem=384M@0x88000000 omapfb.vram=0:12M,1:8M,2:4M omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait
[    0.000000] Beagle expansionboard: none
[    0.000000] Beagle cameraboard: lbcm3m1
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 99MB 384MB = 483MB total
[    0.000000] Memory: 458624KB available (5760K code, 672K data, 196K init, 0K highmem)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:402
[    0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
[    0.000000] Reprogramming SDRC clock to 332000000 Hz
[    0.000000] GPMC revision 5.0
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[    0.000000] Total of 96 interrupts on 1 active controller
[    0.000000] OMAP GPIO hardware version 2.5
[    0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty0] enabled
[    0.000000] Calibrating delay loop... 508.37 BogoMIPS (lpj=1986560)
[    0.000000] Mount-cache hash table entries: 512
[    0.000000] CPU: Testing write buffer coherency: ok
[    0.000000] tmpfs: No value for mount option 'mode'
[    0.000000] devtmpfs: initialized
[    0.000000] regulator: core version 0.5
[    0.000000] NET: Registered protocol family 16
[    0.000000] OMAP3 Beagle Rev: xM A
[    0.000000] Beagle cameraboard: registering i2c2 bus for lbcm3m1
[    0.000000] Found NAND on CS0
[    0.000000] Registering NAND on CS0
[    0.000000] Unable to get DVI reset GPIO
[    0.000000] omap_init_mbox: platform not supported
[22393.999969] OMAP DMA hardware revision 5.0
[22394.006072] bio: create slab <bio-0> at 0
[22394.007293] SCSI subsystem initialized
[22394.008636] usbcore: registered new interface driver usbfs
[22394.008789] usbcore: registered new interface driver hub
[22394.008972] usbcore: registered new device driver usb
[22394.009399] i2c_omap i2c_omap.1: bus 1 rev4.0 at 2600 kHz
[22394.012054] twl4030: PIH (irq 7) chaining IRQs 368..375
[22394.012115] twl4030: power (irq 373) chaining IRQs 376..383
[22394.012390] twl4030: gpio (irq 368) chaining IRQs 384..401
[22394.014099] regulator: VUSB1V5: 1500 mV normal standby
[22394.014343] regulator: VUSB1V8: 1800 mV normal standby
[22394.014587] regulator: VUSB3V1: 3100 mV normal standby
[22394.015808] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[22394.016265] regulator: VMMC1: 1850 <--> 3150 mV normal standby
[22394.016540] regulator: VDAC: 1800 mV normal standby
[22394.016784] regulator: VPLL2: 1800 mV normal standby
[22394.017028] regulator: VSIM: 1800 <--> 3000 mV normal standby
[22394.017364] regulator: VAUX3: 1800 mV normal standby
[22394.017730] regulator: VAUX4: 1800 mV normal standby
[22394.029235] i2c_omap i2c_omap.2: bus 2 rev4.0 at 400 kHz
[22394.042480] i2c_omap i2c_omap.3: bus 3 rev4.0 at 100 kHz
[22394.043670] Switching to clocksource 32k_counter
[22394.052429] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
[22394.056182] musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
[22394.056213] musb_hdrc musb_hdrc: MUSB HDRC host driver
[22394.056365] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
[22394.056518] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[22394.056549] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[22394.056610] usb usb1: Product: MUSB HDRC host driver
[22394.056640] usb usb1: Manufacturer: Linux 2.6.32 musb-hcd
[22394.056671] usb usb1: SerialNumber: musb_hdrc
[22394.057312] hub 1-0:1.0: USB hub found
[22394.057373] hub 1-0:1.0: 1 port detected
[22394.058380] NET: Registered protocol family 2
[22394.058624] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[22394.059204] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[22394.059661] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[22394.059906] TCP: Hash tables configured (established 16384 bind 16384)
[22394.059936] TCP reno registered
[22394.059967] UDP hash table entries: 256 (order: 0, 4096 bytes)
[22394.060028] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[22394.060272] NET: Registered protocol family 1
[22394.060729] RPC: Registered udp transport module.
[22394.060760] RPC: Registered tcp transport module.
[22394.060791] RPC: Registered tcp NFSv4.1 backchannel transport module.
[22394.061645] omap-iommu omap-iommu.0: isp registered
[22394.063354] VFS: Disk quotas dquot_6.5.2
[22394.063476] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[22394.064544] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[22394.065338] JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[22394.066192] msgmni has been set to 896
[22394.069824] alg: No test for stdrng (krng)
[22394.070129] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[22394.070190] io scheduler noop registered
[22394.070220] io scheduler deadline registered
[22394.070373] io scheduler cfq registered (default)
[22394.129882] OMAP DSS rev 2.0
[22394.129974] OMAP DISPC rev 3.0
[22394.130035] OMAP VENC rev 2
[22394.130279] OMAP DSI rev 1.0
[22394.466735] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[22394.484924] serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654
[22394.502471] serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654
[22394.519989] serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654
[22395.101104] console [ttyS2] enabled
[22395.111206] brd: module loaded
[22395.117492] loop: module loaded
[22395.122009] omap2-nand driver initializing
[22395.126403] No NAND device found!!!
[22395.130096] No NAND device found!!!
[22395.134582] usbcore: registered new interface driver catc
[22395.140106] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
[22395.146209] usbcore: registered new interface driver kaweth
[22395.151824] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
[22395.159484] usbcore: registered new interface driver pegasus
[22395.165222] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
[22395.172271] usbcore: registered new interface driver rtl8150
[22395.178070] usbcore: registered new interface driver asix
[22395.183593] usbcore: registered new interface driver cdc_ether
[22395.189575] usbcore: registered new interface driver dm9601
[22395.195312] usbcore: registered new interface driver smsc95xx
[22395.201232] usbcore: registered new interface driver gl620a
[22395.206939] usbcore: registered new interface driver net1080
[22395.212738] usbcore: registered new interface driver plusb
[22395.218383] usbcore: registered new interface driver rndis_host
[22395.224456] usbcore: registered new interface driver cdc_subset
[22395.230499] usbcore: registered new interface driver zaurus
[22395.236236] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[22395.244323] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[22395.251190] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[22395.257232] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 2
[22395.264862] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[22395.286010] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[22395.291900] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[22395.298797] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[22395.306121] usb usb2: Product: OMAP-EHCI Host Controller
[22395.311492] usb usb2: Manufacturer: Linux 2.6.32 ehci_hcd
[22395.316955] usb usb2: SerialNumber: ehci-omap.0
[22395.322204] hub 2-0:1.0: USB hub found
[22395.326080] hub 2-0:1.0: 3 ports detected
[22395.356445] Initializing USB Mass Storage driver...
[22395.361541] usbcore: registered new interface driver usb-storage
[22395.367645] USB Mass Storage support registered.
[22395.372680] mice: PS/2 mouse device common for all mice
[22395.378326] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[22395.386169] input: twl4030_pwrbutton as /devices/platform/i2c_omap.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1
[22395.396911] i2c /dev entries driver
[22395.401031] Linux video capture interface: v2.00
[22395.406005] omap-iommu omap-iommu.0: isp: version 1.1
[22395.412689] vpfe_init
[22395.415557] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[22395.422363] cpuidle: using governor ladder
[22395.426574] cpuidle: using governor menu
[22395.536285] mmci-omap-hs mmci-omap-hs.1: err -16 configuring card detect
[22395.543365] Registered led device: beagleboard::usr0
[22395.548522] Registered led device: beagleboard::usr1
[22395.555023] Registered led device: beagleboard::pmu_stat
[22395.562103] usbcore: registered new interface driver usbhid
[22395.567779] usbhid: USB HID core driver
[22395.571838] Advanced Linux Sound Architecture Driver Version 1.0.21.
[22395.578765] usbcore: registered new interface driver snd-usb-audio
[22395.653930] usb 2-2: new high speed USB device using ehci-omap and address 2
[22395.667388] No device for DAI omap-mcbsp-dai-0
[22395.671905] No device for DAI omap-mcbsp-dai-1
[22395.676422] No device for DAI omap-mcbsp-dai-2
[22395.680938] No device for DAI omap-mcbsp-dai-3
[22395.685455] No device for DAI omap-mcbsp-dai-4
[22395.689941] OMAP3 Beagle SoC init
[22395.694122] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
[22395.705291] ALSA device list:
[22395.708374]   #0: omap3beagle (twl4030)
[22395.712341] oprofile: using arm/armv7
[22395.716278] TCP cubic registered
[22395.719573] NET: Registered protocol family 17
[22395.724151] NET: Registered protocol family 15
[22395.728698] lib80211: common routines for IEEE802.11 drivers
[22395.734466] ThumbEE CPU extension supported.
[22395.738800] Power Management for TI OMAP3.
[22395.744171] SmartReflex driver initialized
[22395.748504] omap3beaglelmb: Driver registration complete
[22395.761932] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[22395.770202] registered taskstats version 1
[22395.833557] usb 2-2: New USB device found, idVendor=0424, idProduct=9514
[22395.840362] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[22395.848327] hub 2-2:1.0: USB hub found
[22395.852355] hub 2-2:1.0: 5 ports detected
[22395.958404] Console: switching to colour frame buffer device 160x45
[22395.977630] mmc0: host does not support reading read-only switch. assuming write-enable.
[22395.986053] mmc0: new high speed SDHC card at address e624
[22395.992187] mmcblk0: mmc0:e624 SU08G 7.40 GiB 
[22395.997222]  mmcblk0:
[22396.001953] regulator_init_complete: incomplete constraints, leaving VAUX4 on
[22396.009674]  p1 p2
[22396.012573] regulator_init_complete: incomplete constraints, leaving VAUX3 on
[22396.020416] regulator_init_complete: incomplete constraints, leaving VDAC on
[22396.028472] omap_vout omap_vout: probed for an unknown device
[22396.044433] EXT3-fs (mmcblk0p2): warning: maximal mount count reached, running e2fsck is recommended
[22396.053924] kjournald starting.  Commit interval 5 seconds
[22396.072601] EXT3-fs (mmcblk0p2): using internal journal
[22396.081604] EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode
[22396.092468] VFS: Mounted root (ext3 filesystem) on device 179:2.
[22396.108184] devtmpfs: mounted
[22396.114929] Freeing init memory: 196K
[22396.184783] usb 2-2.1: new high speed USB device using ehci-omap and address 3

INIT: version 2.86 booting

[22396.309906] usb 2-2.1: New USB device found, idVendor=0424, idProduct=ec00
[22396.320922] usb 2-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[22396.336395] smsc95xx v1.0.4
[22396.401306] usb0: register 'smsc95xx' at usb-ehci-omap.0-2.1, smsc95xx USB 2.0 Ethernet, 9a:90:a2:eb:2d:7e
Please wait: booting...
Starting udev
[22396.653747] usb 2-2.2: new high speed USB device using ehci-omap and address 4
[22396.781158] usb 2-2.2: New USB device found, idVendor=1415, idProduct=2000
[22396.801727] usb 2-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[22396.825225] usb 2-2.2: Product: USB Camera-B4.04.27.1
[22396.845581] usb 2-2.2: Manufacturer: OmniVision Technologies, Inc.
[22396.950500] usb 2-2.3: new high speed USB device using ehci-omap and address 5
[22397.031524] udev: starting version 151
[22397.089172] usb 2-2.3: New USB device found, idVendor=0b95, idProduct=7720
[22397.292785] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[22397.818115] usb 2-2.3: Product: AX88772 
[22398.287506] gspca: main v2.8.0 registered
[22398.408355] usb 2-2.3: Manufacturer: ASIX Elec. Corp.
[22398.639282] gspca: probing 1415:2000
[22398.782592] usb 2-2.3: SerialNumber: 000001
Remounting root file system...
[22398.906860] ov534: Sensor ID: 7721
[22398.995330] ov534: frame_rate: 30
[22399.004089] gspca: /dev/video0 created
[22399.014282] usbcore: registered new interface driver ov534
[22399.024261] ov534: registered
Caching udev devnodes
Populating dev cache
[22399.603393] Bluetooth: Core ver 2.15
[22399.612976] NET: Registered protocol family 31
[22399.622619] Bluetooth: HCI device and connection manager initialized
[22399.633453] Bluetooth: HCI socket layer initialized
[22399.665588] Bluetooth: L2CAP ver 2.14
[22399.674407] Bluetooth: L2CAP socket layer initialized
[22399.705413] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[22399.745269] eth0: register 'asix' at usb-ehci-omap.0-2.3, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0a:21:18
[22399.791259] udev: renamed network interface eth0 to eth1
[22399.888122] usb 2-2.4: new low speed USB device using ehci-omap and address 6
[22399.996948] NET: Registered protocol family 10
[22400.064605] usb 2-2.4: New USB device found, idVendor=045e, idProduct=00cb
[22400.090820] usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[22400.113952] usb 2-2.4: Product: Microsoft Basic Optical Mouse v2.0 
[22400.125549] NET: Registered protocol family 23
[22400.136352] usb 2-2.4: Manufacturer: Microsoft 
[22400.159423] input: Microsoft  Microsoft Basic Optical Mouse v2.0  as /devices/platform/ehci-omap.0/usb2/2-2/2-2.4/2-2.4:1.0/input/input2
[22400.214202] IrCOMM protocol (Dag Brattli)
[22400.233917] generic-usb 0003:045E:00CB.0001: input: USB HID v1.11 Mouse [Microsoft  Microsoft Basic Optical Mouse v2.0 ] on usb-ehci-omap.0-2.4/input0
[22400.399627] Bluetooth: RFCOMM TTY layer initialized
[22400.409423] Bluetooth: RFCOMM socket layer initialized
[22400.419250] Bluetooth: RFCOMM ver 1.11
[22400.427490] usb 2-2.5: new low speed USB device using ehci-omap and address 7
[22400.567504] usb 2-2.5: New USB device found, idVendor=045e, idProduct=0750
[22400.583007] usb 2-2.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[22400.595001] usb 2-2.5: Product: Wired Keyboard 600
[22400.604217] usb 2-2.5: Manufacturer: Microsoft
[22400.630645] input: Microsoft Wired Keyboard 600 as /devices/platform/ehci-omap.0/usb2/2-2/2-2.5/2-2.5:1.0/input/input3
[22400.700561] generic-usb 0003:045E:0750.0002: input: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-ehci-omap.0-2.5/input0
[22400.784606] input: Microsoft Wired Keyboard 600 as /devices/platform/ehci-omap.0/usb2/2-2/2-2.5/2-2.5:1.1/input/input4
[22400.856506] generic-usb 0003:045E:0750.0003: input: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-ehci-omap.0-2.5/input1
ALSA: Restoring mixer settings...
Cleaning: /etc/network/run/ifstate.
No state is present for card CameraB404271
/usr/sbin/alsactl: parse:1655: Unable to open file '/usr/share/alsa/init/00main': No such file or directory
No state is present for card CameraB404271
Configuring network interfaces... eth0: unknown interface: No such device
eth0: unknown interface: No such device
eth0      No such device

Internet Systems Consortium DHCP Client 4.1.1-P1
Copyright 2004-2010 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

SIOCSIFADDR: No such device
eth0: unknown interface: No such device
eth0: unknown interface: No such device
Bind socket to interface: No such device

If you did not get this software from ftp.isc.org, please
get the latest from ftp.isc.org and install that before
requesting help.

If you did get this software from ftp.isc.org and have not
yet read the README, please read it before requesting help.
If you intend to request help from the dhcp-server@isc.org
mailing list, please read the section on the README about
submitting bug reports and requests for help.

Please do not under any circumstances send requests for
help directly to the authors of this software - please
send them to the appropriate mailing list as described in
the README file.

exiting.
Failed to bring up eth0.
usb0      no wireless extensions.

Internet Systems Consortium DHCP Client 4.1.1-P1
Copyright 2004-2010 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

Listening on LPF/usb0/7e:3d:60:0e:c7:a2
Sending on   LPF/usb0/7e:3d:60:0e:c7:a2
Sending on   Socket/fallback
DHCPREQUEST on usb0 to 255.255.255.255 port 67
DHCPREQUEST on usb0 to 255.255.255.255 port 67
DHCPDISCOVER on usb0 to 255.255.255.255 port 67 interval 3
DHCPDISCOVER on usb0 to 255.255.255.255 port 67 interval 7
DHCPDISCOVER on usb0 to 255.255.255.255 port 67 interval 7
DHCPDISCOVER on usb0 to 255.255.255.255 port 67 interval 10
DHCPDISCOVER on usb0 to 255.255.255.255 port 67 interval 11
DHCPDISCOVER on usb0 to 255.255.255.255 port 67 interval 13
[22460.296112] usb 2-2.4: USB disconnect, address 6
[22461.817718] usb 2-2.4: new low speed USB device using ehci-omap and address 8
[22461.947753] usb 2-2.4: New USB device found, idVendor=045e, idProduct=00cb
[22461.959808] usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[22461.972229] usb 2-2.4: Product: Microsoft Basic Optical Mouse v2.0 
[22461.983642] usb 2-2.4: Manufacturer: Microsoft 
[22462.001617] input: Microsoft  Microsoft Basic Optical Mouse v2.0  as /devices/platform/ehci-omap.0/usb2/2-2/2-2.4/2-2.4:1.0/input/input5
[22462.054229] generic-usb 0003:045E:00CB.0004: input: USB HID v1.11 Mouse [Microsoft  Microsoft Basic Optical Mouse v2.0 ] on usb-ehci-omap.0-2.4/input0
DHCPDISCOVER on usb0 to 255.255.255.255 port 67 interval 8
DHCPDISCOVER on usb0 to 255.255.255.255 port 67 interval 2
No DHCPOFFERS received.
Trying recorded lease 192.168.1.104
PING 192.168.1.1 (192.168.1.1): 56 data bytes
64 bytes from 192.168.1.104: Destination Host Unreachable
Vr HL TOS  Len   ID Flg  off TTL Pro  cks      Src      Dst Data
 4  5  00 5400 0000   0 0040  40  01 efb6 192.168.1.104  192.168.1.1 
--- 192.168.1.1 ping statistics ---
1 packets transmitted, 0 packets received, 100% packet loss
No working leases in persistent database - sleeping.
done.
Starting portmap daemon: portmap.
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
hwclock: can't open '/dev/misc/rtc': No such file or directory
Tue Oct  4 01:58:00 BST 2011
hwclock: can't open '/dev/misc/rtc': No such file or directory

INIT: Entering runlevel: 5

Starting system message bus: dbus.
Starting Hardware abstraction layer hald
Configuring leds:
  beagleboard::pmu_stat: none
  beagleboard::usr0: heartbeat
  beagleboard::usr1: mmc0
Starting Dropbear SSH server: dropbear.
Starting advanced power management daemon: No APM support in kernel
(failed.)
Starting Vixie-cron.
Starting Samba: smbd nmbd.
Starting syslog-ng:.
Starting internet superserver: xinetd.
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
�[A�[74G[ ok ]
Starting Network connection manager daemon: NetworkManager.
Starting PVR
[22488.673706] eth1: link up, 100Mbps, full-duplex, lpa 0x41E1
[22488.848663] eth1: link up, 100Mbps, full-duplex, lpa 0x41E1
cups: started scheduler.
Starting GNOME Display Manager gdm

.-------.                                           
|       |                  .-.                      
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beagleboard ttyS2

Angstrom 2010.7-test-20110220 beagleboard ttyS2

2-X, page X, Shutdown messages

root@beagleboard:~# shutdown -r now
Broadcast message from root (ttyS2) (Tue Oct  4 01:58:15 2011):
The system is going down for reboot NOW!


INIT: 
INIT: Sending processes the TERM signal

Deconfiguring leds:
  beagleboard::pmu_stat: no trigger
  beagleboard::usr0: no trigger
  beagleboard::usr1: no trigger
Stopping Dropbear SSH server: dropbear.
 * Stopping Avahi mDNS/DNS-SD Daemon: avahi-daemon
�[A�[74G[ ok ]
Stopping advanced power management daemon: No /usr/sbin/apmd found running; none killed.
apmd.
Stopping Vixie-cron.
Stopping Hardware abstraction layer hald
Stopping system message bus: dbus.
Stopping GNOME Display Manager gdm
Stopping Samba: smbd nmbd.
Stopping internet superserver: xinetd.
Stopping Network connection manager daemon: NetworkManager.
ALSA: Storing mixer settings...
/usr/sbin/alsactl: get_control:259: Cannot read control '2,0,0,Mic Capture Volume,0': Invalid argument
Deconfiguring network interfaces... Internet Systems Consortium DHCP Client 4.1.1-P1
Copyright 2004-2010 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

Listening on LPF/usb0/aa:db:5c:9e:a0:a0
Sending on   LPF/usb0/aa:db:5c:9e:a0:a0
Sending on   Socket/fallback
DHCPRELEASE on usb0 to 192.168.1.1 port 67
done.
Stopping PVR
Stopping syslog-ng:.
Sending all processes the TERM signal...
Sending all processes the KILL signal...
hwclock: can't open '/dev/misc/rtc': No such file or directory
Unmounting remote filesystems...
Stopping portmap daemon: portmap.
Deactivating swap...
Unmounting local filesystems...
Rebooting... [22385.076416] Restarting system.

2-X, page X, ifconfig

root@beagleboard:~# ifconfig
root@beagleboard:~# ifconfig
eth1      Link encap:Ethernet  HWaddr 00:50:B6:0A:21:18  
          inet addr:137.112.101.235  Bcast:137.112.101.255  Mask:255.255.255.0
          inet6 addr: fe80::250:b6ff:fe0a:2118/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:268 errors:0 dropped:0 overruns:0 frame:0
          TX packets:96 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:19429 (18.9 KiB)  TX bytes:15858 (15.4 KiB)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:9 errors:0 dropped:0 overruns:0 frame:0
          TX packets:9 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:592 (592.0 b)  TX bytes:592 (592.0 b)

usb0      Link encap:Ethernet  HWaddr 5A:3D:7F:FE:EE:BA  
          inet6 addr: fe80::583d:7fff:fefe:eeba/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1492  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:51 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 b)  TX bytes:10614 (10.3 KiB)

2-3, page 18, Linux Final Boot Messages

[22396.092468] VFS: Mounted root (ext3 filesystem) on device 179:2.
[22396.108184] devtmpfs: mounted
[22396.114929] Freeing init memory: 196K
[22396.184783] usb 2-2.1: new high speed USB device using ehci-omap and address 3

INIT: version 2.86 booting

[22396.309906] usb 2-2.1: New USB device found, idVendor=0424, idProduct=ec00
[22396.320922] usb 2-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[22396.336395] smsc95xx v1.0.4
[22396.401306] usb0: register 'smsc95xx' at usb-ehci-omap.0-2.1, smsc95xx USB 2.0 Ethernet, 9a:90:a2:eb:2d:7e
Please wait: booting...
Starting udev

2-4, page 29, Hello World, Embedded Style

#include <stdio.h>

int bss_var;        /* Uninitialized global variable */

int data_var = 1;   /* Initialized global variable */

int main(int argc, char **argv)
{
  void *stack_var;            /* Local variable on the stack */
  
  stack_var = (void *)main;   /* Don't let the compiler */
                              /* optimize it out */

  printf("Hello, World! Main is executing at %p\n", stack_var);
  printf("This address (%p) is in our stack frame\n", &stack_var);

  /* bss section contains uninitialized data */
  printf("This address (%p) is in our bss section\n", &bss_var);

  /* data section contains initializated data */
  printf("This address (%p) is in our data section\n", &data_var);

  return 0;
}

2-5, page 29, Hello Output for Host Computer

beagle@embed11:~/exercises$ gcc helloWorld.c 
beagle@embed11:~/exercises$ ./a.out
Hello, World! Main is executing at 0x400524
This address (0x7fff1bfbafc8) is in our stack frame
This address (0x601038) is in our bss section
This address (0x601020) is in our data section

2-5, page 29, Hello Output for Beagle

root@beagleboard:~/exercises# gcc helloWorld.c 
root@beagleboard:~/exercises# ./a.out
Hello, World! Main is executing at 0x8380
This address (0xbeb4fc94) is in our stack frame
This address (0x10670) is in our bss section
This address (0x10668) is in our data section