Difference between revisions of "ECE497 Listings for Embedded Linux Primer Chapter 5"

From eLinux.org
Jump to: navigation, search
m (Updated for 3.8 kernel)
 
(4 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 +
[[Category:ECE497old]]
  
 
{|
 
{|
Line 10: Line 11:
 
| Final Kernel Build Sequence:  ARM/BeagleBoard
 
| Final Kernel Build Sequence:  ARM/BeagleBoard
 
| <pre>
 
| <pre>
$ export OETREE="${HOME}/oe"
+
host$ source ~/crossCompileEnv.sh
$ PATH=${OETREE}/angstrom-dev/staging/i686-linux/usr/bin/:${PATH}
+
host$ make -j3 uImage
$ PATH=${OETREE}/angstrom-dev/cross/armv7a/bin/:${PATH}
+
$ make CROSS_COMPILE=arm-angstrom-linux-gnueabi- uImage
+
 
... < many build steps omitted for clarity >
 
... < many build steps omitted for clarity >
 
   LD      vmlinux
 
   LD      vmlinux
 +
  SORTEX  vmlinux
 +
sort done marker at 81c420
 
   SYSMAP  System.map
 
   SYSMAP  System.map
  SYSMAP  .tmp_System.map
 
 
   OBJCOPY arch/arm/boot/Image
 
   OBJCOPY arch/arm/boot/Image
 
   Kernel: arch/arm/boot/Image is ready
 
   Kernel: arch/arm/boot/Image is ready
   GZIP    arch/arm/boot/compressed/piggy.gz
+
   AS      arch/arm/boot/compressed/head.o
   AS      arch/arm/boot/compressed/piggy.o
+
  XZKERN  arch/arm/boot/compressed/piggy.xzkern
 +
  CC      arch/arm/boot/compressed/misc.o
 +
  CC      arch/arm/boot/compressed/decompress.o
 +
  CC      arch/arm/boot/compressed/string.o
 +
  SHIPPED arch/arm/boot/compressed/hyp-stub.S
 +
  AS      arch/arm/boot/compressed/lib1funcs.o
 +
  AS      arch/arm/boot/compressed/ashldi3.o
 +
  AS      arch/arm/boot/compressed/hyp-stub.o
 +
   AS      arch/arm/boot/compressed/piggy.xzkern.o
 
   LD      arch/arm/boot/compressed/vmlinux
 
   LD      arch/arm/boot/compressed/vmlinux
 
   OBJCOPY arch/arm/boot/zImage
 
   OBJCOPY arch/arm/boot/zImage
 
   Kernel: arch/arm/boot/zImage is ready
 
   Kernel: arch/arm/boot/zImage is ready
 
   UIMAGE  arch/arm/boot/uImage
 
   UIMAGE  arch/arm/boot/uImage
Image Name:  Linux-2.6.29-omap1
+
Image Name:  Linux-3.8.13+
Created:      Tue Mar 9 12:58:27 2010
+
Created:      Thu Oct 3 17:13:18 2013
 
Image Type:  ARM Linux Kernel Image (uncompressed)
 
Image Type:  ARM Linux Kernel Image (uncompressed)
Data Size:    2991236 Bytes = 2921.13 kB = 2.85 MB
+
Data Size:    2898464 Bytes = 2830.53 kB = 2.76 MB
Load Address: 0x80008000
+
Load Address: 80008000
Entry Point:  0x80008000
+
Entry Point:  80008000
 
   Image arch/arm/boot/uImage is ready
 
   Image arch/arm/boot/uImage is ready
 
</pre>
 
</pre>
Line 48: Line 56:
 
|-
 
|-
 
| 5-3
 
| 5-3
| 5-7
+
| 106
 
| Final Kernel Build Sequence:  ARM/BeagleBoard
 
| Final Kernel Build Sequence:  ARM/BeagleBoard
 
| <pre>
 
| <pre>
reading uImage                                                                                                      
+
Texas Instruments X-Loader 1.4.4ss (Aug 19 2010 - 02:49:27)
                                                                                                                   
+
Beagle xM Rev A
2996196 bytes read                                                                                                  
+
Reading boot sector
## Booting kernel from Legacy Image at 80300000 ...                                                                
+
Loading u-boot.bin from mmc
   Image Name:  Angstrom/2.6.29/beagleboard                                                                        
+
 
   Image Type:  ARM Linux Kernel Image (uncompressed)                                                              
+
 
   Data Size:    2996132 Bytes =  2.9 MB                                                                            
+
U-Boot 2010.03-dirty (Aug 20 2010 - 20:50:46)
   Load Address: 80008000                                                                                          
+
 
   Entry Point:  80008000                                                                                          
+
OMAP3630/3730-GP ES1.0, CPU-OPP2, L3-165MHz,
   Verifying Checksum ... OK                                                                                        
+
OMAP3 Beagle board + LPDDR/NAND
   Loading Kernel Image ... OK                                                                                      
+
I2C:  ready
OK                                                                                                                  
+
DRAM:  512 MB
                                                                                                                   
+
NAND:  0 MiB
Starting kernel ...                                                                                                
+
*** Warning - bad CRC or NAND, using default environment
                                                                                                                   
+
 
Uncompressing Linux..................................................................................................
+
In:    serial
[    0.000000] Linux version 2.6.29-omap1 (koen@dominion) (gcc version 4.3.3 (GCC) ) #1 PREEMPT Wed Oct 21 13:11:52 9
+
Out:  serial
[    0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c5387f                                     
+
Err:  serial
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache                                
+
 
[    0.000000] Machine: OMAP3 Beagle Board                                                                          
+
Probing for expansion boards, if none are connected you'll see a harmless I2C error.
[    0.000000] Memory policy: ECC disabled, Data cache writeback                                                    
+
 
[    0.000000] OMAP3430 ES3.1                                                                                       
+
No EEPROM on expansion board
[    0.000000] SRAM: Mapped pa 0x40200000 to va 0xd7000000 size: 0x100000                                          
+
Beagle xM Rev A
[    0.000000] Reserving 14680064 bytes SDRAM for VRAM                                                              
+
Die ID #34780000061000000156166b0a02300a
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024                           
+
Hit any key to stop autoboot:  3 ��� 2 ��� 1 ��� 0
[    0.000000] Kernel command line: console=ttyS2,115200n8 console=tty0 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootw0
+
mmc1 is available
[    0.000000] Clocking rate (Crystal/DPLL/ARM core): 26.0/332/720 MHz                                              
+
The user button is currently NOT pressed.
[    0.000000] GPMC revision 5.0                                                                                    
+
reading boot.scr
[    0.000000] IRQ: Found an INTC at 0xd8200000 (revision 4.0) with 96 interrupts                                  
+
 
[    0.000000] Total of 96 interrupts on 1 active controller                                                        
+
687 bytes read
[    0.000000] OMAP34xx GPIO hardware version 2.5                                                                  
+
Running bootscript from mmc ...
[    0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)                                                 
+
## Executing script at 80200000
[    0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz                                                        
+
mmc1 is available
[    0.000000] Console: colour dummy device 80x30                                                                  
+
reading uImage
[    0.000000] console [tty0] enabled                                                                               
+
 
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)                                     
+
3193476 bytes read
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)                                       
+
Booting from mmc ...
[    0.000000] Memory: 128MB 128MB = 256MB total                                                                   
+
## Booting kernel from Legacy Image at 80200000 ...
[    0.000000] Memory: 238848KB available (5632K code, 576K data, 204K init)                                       
+
   Image Name:  Angstrom/2.6.32/beagleboard
[    0.000000] Calibrating delay loop... 750.98 BogoMIPS (lpj=2932736)                                              
+
   Image Type:  ARM Linux Kernel Image (uncompressed)
[    0.000000] Mount-cache hash table entries: 512                                                                  
+
   Data Size:    3193412 Bytes =  3 MB
[    0.000000] CPU: Testing write buffer coherency: ok                                                              
+
   Load Address: 80008000
[    0.000000] net_namespace: 1036 bytes                                                                           
+
   Entry Point:  80008000
[    0.000000] regulator: core version 0.5                                                                          
+
   Verifying Checksum ... OK
[    0.000000] NET: Registered protocol family 16                                                                  
+
   Loading Kernel Image ... OK
[    0.000000] GPIO-156 autorequested                                                                               
+
OK
[    0.000000] GPIO-159 autorequested                                                                               
+
 
[    0.000000] Found NAND on CS0                                                                                    
+
Starting kernel ...
[    0.000000] Registering NAND on CS0                                                                             
+
 
[   17.966888] OMAP DMA hardware revision 4.0                                                                      
+
Uncompressing Linux................................................................................................................................................................................................................ done, booting the kernel.
[   18.000305] bio: create slab <bio-0> at 0                                                                        
+
[    0.000000] Linux version 2.6.32 (daniel@kids-laptop) (gcc version 4.3.3 (GCC) ) #3 PREEMPT Tue Nov 2 18:38:11 CDT 2010
[   18.061981] OMAP DSS rev 2.0                                                                                     
+
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
[   18.062103] OMAP DISPC rev 3.0                                                                                   
+
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[   18.062133] OMAP VENC rev 2                                                                                     
+
[    0.000000] Machine: OMAP3 Beagle Board
[   18.062255] OMAP DSI rev 1.0                                                                                     
+
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[   18.078216] i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz                                                      
+
[    0.000000] OMAP3630/DM3730 ES1.0 (l2cache iva sgx neon isp 192mhz_clk )
[   18.081542] twl4030: PIH (irq 7) chaining IRQs 368..375                                                          
+
[    0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
[   18.081604] twl4030: power (irq 373) chaining IRQs 376..383                                                      
+
[    0.000000] Reserving 16777216 bytes SDRAM for VRAM
[   18.082092] twl4030: gpio (irq 368) chaining IRQs 384..401                                                      
+
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 117760
[   18.084442] regulator: VMMC1: 1850 <--> 3150 mV normal standby                                                  
+
[    0.000000] Kernel command line: console=ttyS2,115200n8 mem=80M@0x80000000 mem=384M@0x88000000 mpurate=1000 buddy=none camera=lbcm3m1 vram=16M omapfb.vram=0:8M,1:4M,2:4M omapfb.mode=dvi:hd720 omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait
[   18.085235] regulator: VDAC: 1800 mV normal standby                                                              
+
[    0.000000] Beagle expansionboard: none
[   18.085968] regulator: VUSB1V5: 1500 <--> 0 mV normal standby                                                    
+
[    0.000000] Beagle cameraboard: lbcm3m1
[   18.086822] regulator: VUSB1V8: 1800 <--> 0 mV normal standby                                                    
+
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[   18.087585] regulator: VUSB3V1: 3100 <--> 0 mV normal standby                                                    
+
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[   18.088287] regulator: VPLL2: 1800 mV normal standby                                                            
+
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[   18.089050] regulator: VMMC2: 2800 <--> 3150 mV normal standby                                                  
+
[    0.000000] Memory: 80MB 384MB = 464MB total
[   18.089813] regulator: VSIM: 1800 <--> 3000 mV normal standby                                                    
+
[    0.000000] Memory: 447360KB available (5880K code, 671K data, 204K init, 0K highmem)
[   18.089996] i2c_omap i2c_omap.2: bus 2 rev3.12 at 400 kHz                                                        
+
[    0.000000] Hierarchical RCU implementation.
[   18.102722] i2c_omap i2c_omap.3: bus 3 rev3.12 at 100 kHz                                                        
+
[    0.000000] NR_IRQS:402
[   18.104492] SCSI subsystem initialized                                                                           
+
[    0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
[   18.107452] twl4030_usb twl4030_usb: Initialized TWL4030 USB module                                             
+
[    0.000000] Reprogramming SDRC clock to 332000000 Hz
[   18.108764] usbcore: registered new interface driver usbfs                                                       
+
[    0.000000] GPMC revision 5.0
[   18.109252] usbcore: registered new interface driver hub                                                         
+
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[   18.109619] usbcore: registered new device driver usb                                                           
+
[    0.000000] Total of 96 interrupts on 1 active controller
[   18.112121] Bluetooth: Core ver 2.14                                                                             
+
[    0.000000] OMAP GPIO hardware version 2.5
[   18.112548] NET: Registered protocol family 31                                                                   
+
[    0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
[  18.112579] Bluetooth: HCI device and connection manager initialized                                             
+
[    0.000000] Console: colour dummy device 80x30
[  18.112640] Bluetooth: HCI socket layer initialized                                                             
+
[    0.000000] Calibrating delay loop... 533.58 BogoMIPS (lpj=2084864)
[   18.113250] cfg80211: Using static regulatory domain info                                                       
+
[    0.000000] Mount-cache hash table entries: 512
[   18.113281] cfg80211: Regulatory domain: US                                                                     
+
[    0.000000] CPU: Testing write buffer coherency: ok
[  18.113311]  (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)                                   
+
[    0.000000] tmpfs: No value for mount option 'mode'
[  18.113342]  (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)                                       
+
[    0.000000] devtmpfs: initialized
[   18.113403] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)                                       
+
[    0.000000] regulator: core version 0.5
[   18.113433] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)                                       
+
[    0.000000] NET: Registered protocol family 16
[  18.113464]  (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)                                       
+
[    0.000000] Beagle cameraboard: registering i2c2 bus for lbcm3m1
[   18.113494] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)                                       
+
[    0.000000] Found NAND on CS0
[  18.113525]  (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)                                       
+
[    0.000000] Registering NAND on CS0
[  18.113586] cfg80211: Calling CRDA for country: US                                                               
+
[    0.000000] Unable to get DVI reset GPIO
[  18.116333] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0                                     
+
[   0.000000] omap_init_mbox: platform not supported
[  18.118591] musb_hdrc: USB OTG mode controller at d80ab000 using DMA, IRQ 92                                     
+
[    0.000000] Target VDD1 OPP = 4, VDD2 OPP = 2
[   18.119873] NET: Registered protocol family 2                                                                    
+
[36907.893096] OMAP DMA hardware revision 5.0
[   18.120117] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)                                      
+
[36907.899261] bio: create slab <bio-0> at 0
[   18.120635] TCP established hash table entries: 8192 (order: 4, 65536 bytes)                                    
+
[36907.900482] SCSI subsystem initialized
[   18.120849] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)                                            
+
[36907.901763] usbcore: registered new interface driver usbfs
[   18.120971] TCP: Hash tables configured (established 8192 bind 8192)                                            
+
[36907.901916] usbcore: registered new interface driver hub
[   18.121002] TCP reno registered                                                                                  
+
[36907.902069] usbcore: registered new device driver usb
[   18.121215] NET: Registered protocol family 1                                                                    
+
[36907.902435] i2c_omap i2c_omap.1: bus 1 rev4.0 at 2600 kHz
[   18.124542] VFS: Disk quotas dquot_6.5.2                                                                        
+
[36907.905120] twl4030: PIH (irq 7) chaining IRQs 368..375
[   18.124664] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)                                          
+
[36907.905151] twl4030: power (irq 373) chaining IRQs 376..383
[   18.125152] squashfs: version 4.0 (2009/01/31) Phillip Lougher                                                  
+
[36907.905426] twl4030: gpio (irq 368) chaining IRQs 384..401
[   18.125762] JFFS2 version 2.2. (NAND) (SUMMARY)  �© 2001-2006 Red Hat, Inc.                                      
+
[36907.907104] regulator: VUSB1V5: 1500 mV normal standby
[   18.126495] msgmni has been set to 466                                                                           
+
[36907.907348] regulator: VUSB1V8: 1800 mV normal standby
[   18.130279] alg: No test for stdrng (krng)                                                                      
+
[36907.907562] regulator: VUSB3V1: 3100 mV normal standby
[   18.130401] io scheduler noop registered                                                                         
+
[36907.908782] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[   18.130432] io scheduler anticipatory registered                                                                
+
[36907.909149] regulator: VMMC1: 1850 <--> 3150 mV normal standby
[   18.130462] io scheduler deadline registered                                                                    
+
[36907.909423] regulator: VDAC: 1800 mV normal standby
[   18.130645] io scheduler cfq registered (default)                                                                
+
[36907.909637] regulator: VPLL2: 1800 mV normal standby
[   18.149841] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled                                              
+
[36907.909881] regulator: VSIM: 1800 <--> 3000 mV normal standby
[   18.172973] serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654                                      
+
[36907.910217] regulator: VAUX3: 1800 mV normal standby
[   18.194763] serial8250.0: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654                                      
+
[36907.910614] regulator: VAUX4: 1800 mV normal standby
[   18.217071] serial8250.0: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654                                      
+
[36907.924316] i2c_omap i2c_omap.2: bus 2 rev4.0 at 400 kHz
[   18.217132] console [ttyS2] enabled                                                                              
+
[36907.938201] i2c_omap i2c_omap.3: bus 3 rev4.0 at 100 kHz
[   18.747802] brd: module loaded                                                                                  
+
[36907.939392] Switching to clocksource 32k_counter
[   18.755737] loop: module loaded                                                                                  
+
[36907.948394] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
[   18.759490] enc28j60 spi4.0: enc28j60 Ethernet driver 1.01 loaded                                               
+
[36907.952239] musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
[   18.768646] enc28j60 spi4.0: enc28j60 chip not found                                                            
+
[36907.952239] musb_hdrc musb_hdrc: MUSB HDRC host driver
[   18.773681] enc28j60: probe of spi4.0 failed with error -5                                                       
+
[36907.952362] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
[   18.779785] usbcore: registered new interface driver catc                                                        
+
[36907.952514] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   18.785308] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver                                                  
+
[36907.952514] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   18.791564] usbcore: registered new interface driver kaweth                                                      
+
[36907.952545] usb usb1: Product: MUSB HDRC host driver
[   18.797180] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver                                
+
[36907.952545] usb usb1: Manufacturer: Linux 2.6.32 musb-hcd
[   18.804992] usbcore: registered new interface driver pegasus                                                    
+
[36907.952575] usb usb1: SerialNumber: musb_hdrc
[   18.810760] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver                                      
+
[36907.953186] hub 1-0:1.0: USB hub found
[   18.817932] usbcore: registered new interface driver rtl8150                                                    
+
[36907.953216] hub 1-0:1.0: 1 port detected
[   18.823883] usbcore: registered new interface driver asix                                                        
+
[36907.954254] NET: Registered protocol family 2
[   18.829559] usbcore: registered new interface driver cdc_ether                                                  
+
[36907.954467] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[   18.835723] usbcore: registered new interface driver dm9601                                                      
+
[36907.955017] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[   18.841613] usbcore: registered new interface driver smsc95xx                                                    
+
[36907.955474] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[   18.847686] usbcore: registered new interface driver gl620a                                                      
+
[36907.955688] TCP: Hash tables configured (established 16384 bind 16384)
[   18.853515] usbcore: registered new interface driver net1080                                                    
+
[36907.955688] TCP reno registered
[   18.859497] usbcore: registered new interface driver plusb                                                      
+
[36907.955718] UDP hash table entries: 256 (order: 0, 4096 bytes)
[   18.865295] usbcore: registered new interface driver rndis_host                                                  
+
[36907.955749] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[   18.871520] usbcore: registered new interface driver cdc_subset                                                  
+
[36907.955993] NET: Registered protocol family 1
[   18.877777] usbcore: registered new interface driver zaurus                                                      
+
[36907.956420] RPC: Registered udp transport module.
[   18.883605] usbcore: registered new interface driver MOSCHIP usb-ethernet driver                                
+
[36907.956420] RPC: Registered tcp transport module.
[   18.891357] Broadcom 43xx driver loaded [ Features: L, Firmware-ID: FW13 ]                                       
+
[36907.956451] RPC: Registered tcp NFSv4.1 backchannel transport module.
[  18.898681] usbcore: registered new interface driver zd1211rw                                                   
+
[36907.957305] omap-iommu omap-iommu.0: isp registered
[  18.904754] usbcore: registered new interface driver rtl8187                                                     
+
[36907.959014] VFS: Disk quotas dquot_6.5.2
[  18.910766] usbcore: registered new interface driver rndis_wlan                                                 
+
[36907.959106] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[  18.916992] usbcore: registered new interface driver zd1201                                                     
+
[36907.960144] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[  18.922882] usbcore: registered new interface driver usb8xxx                                                     
+
[36907.960937] JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[  18.928894] usbcore: registered new interface driver rt2500usb                                                   
+
[36907.961730] msgmni has been set to 874
[  18.935058] usbcore: registered new interface driver rt73usb                                                     
+
[36907.965515] alg: No test for stdrng (krng)
[  18.941070] usbcore: registered new interface driver p54usb                                                     
+
[36907.965789] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[  18.946685] i2c /dev entries driver                                                                             
+
[36907.965820] io scheduler noop registered
[  18.951751] Driver 'sd' needs updating - please use bus_type methods                                             
+
[36907.965850] io scheduler deadline registered
[  18.958465] Driver 'sr' needs updating - please use bus_type methods                                             
+
[36907.965972] io scheduler cfq registered (default)
[  18.965759] omap2-nand driver initializing                                                                       
+
[36908.025604] OMAP DSS rev 2.0
[  18.970184] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB 1,8V 16-bit)                   
+
[36908.025665] OMAP DISPC rev 3.0
[  18.979248] cmdlinepart partition parsing not available                                                         
+
[36908.025726] OMAP VENC rev 2
[  18.984527] Creating 5 MTD partitions on "omap2-nand":                                                           
+
[36908.025970] OMAP DSI rev 1.0
[  18.989746] 0x000000000000-0x000000080000 : "X-Loader"                                                           
+
[36908.362426] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[  18.996765] 0x000000080000-0x000000260000 : "U-Boot"                                                             
+
[36908.381408] serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654
[  19.003692] 0x000000260000-0x000000280000 : "U-Boot Env"                                                         
+
[36908.399780] serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654
[  19.010192] 0x000000280000-0x000000680000 : "Kernel"                                                             
+
[36908.418121] serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654
[  19.018005] 0x000000680000-0x000010000000 : "File System"                                                       
+
[36908.990447] console [ttyS2] enabled
[  19.135314] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver                                          
+
[36909.000549] brd: module loaded
[   19.142211] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller                                                    
+
[36909.006866] loop: module loaded
[   19.148773] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1                                 
+
[36909.011291] omap2-nand driver initializing
[   19.156585] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800                                                    
+
[36909.015655] No NAND device found!!!
[   19.173980] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00                                                    
+
[36909.019378] No NAND device found!!!
[   19.180419] usb usb1: configuration #1 chosen from 1 choice                                                     
+
[36909.023864] usbcore: registered new interface driver catc
[   19.186462] hub 1-0:1.0: USB hub found                                                                          
+
[36909.029357] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
[   19.190368] hub 1-0:1.0: 3 ports detected                                                                        
+
[36909.035430] usbcore: registered new interface driver kaweth
[   19.196166] Initializing USB Mass Storage driver...                                                              
+
[36909.041076] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
[   19.201507] usbcore: registered new interface driver usb-storage                                                
+
[36909.048675] usbcore: registered new interface driver pegasus
[   19.207611] USB Mass Storage support registered.                                                                
+
[36909.054382] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
[   19.212829] mice: PS/2 mouse device common for all mice                                                          
+
[36909.061401] usbcore: registered new interface driver rtl8150
[   19.218688] input: gpio-keys as /devices/platform/gpio-keys/input/input0                                        
+
[36909.067199] usbcore: registered new interface driver asix
[   19.227600] input: twl4030_pwrbutton as /devices/platform/i2c_omap.1/i2c-adapter/i2c-1/1-0049/twl4030_pwrbutton/i1
+
[36909.072723] usbcore: registered new interface driver cdc_ether
[   19.519744] usb 1-2: new high speed USB device using ehci-omap and address 2                                     
+
[36909.078643] usbcore: registered new interface driver dm9601
[   19.683166] usb 1-2: configuration #1 chosen from 1 choice                                                       
+
[36909.084350] usbcore: registered new interface driver smsc95xx
[  19.689208] hub 1-2:1.0: USB hub found                                                                           
+
[36909.090240] usbcore: registered new interface driver gl620a
[   19.693237] hub 1-2:1.0: 4 ports detected                                                                       
+
[36909.095947] usbcore: registered new interface driver net1080
[  19.986877] usb 1-2.2: new high speed USB device using ehci-omap and address 3                                   
+
[36909.101715] usbcore: registered new interface driver plusb
[  20.126037] usb 1-2.2: configuration #1 chosen from 1 choice                                                     
+
[36909.107330] usbcore: registered new interface driver rndis_host
[   20.236846] i2c_omap i2c_omap.2: controller timed out                                                           
+
[36909.113372] usbcore: registered new interface driver cdc_subset
[   20.242004] rtc-ds1307: probe of 2-0068 failed with error -5                                                     
+
[36909.119415] usbcore: registered new interface driver zaurus
[  20.249267] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec                                                
+
[36909.125091] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[   20.255615] Bluetooth: HCI UART driver ver 2.2                                                                   
+
[36909.133178] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[  20.260162] Bluetooth: HCI H4 protocol initialized                                                               
+
[36909.139984] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[  20.264984] Bluetooth: HCI BCSP protocol initialized                                                             
+
[36909.146026] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 2
[  20.270050] Bluetooth: HCILL protocol initialized                                                               
+
[36909.153625] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[  20.274810] Bluetooth: Broadcom Blutonium firmware driver ver 1.2                                               
+
[36909.173797] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[  20.281280] usbcore: registered new interface driver bcm203x                                                     
+
[36909.179687] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[  20.287048] Bluetooth: Digianswer Bluetooth USB driver ver 0.10                                                 
+
[36909.186553] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  20.293273] usbcore: registered new interface driver bpa10x                                                     
+
[36909.193847] usb usb2: Product: OMAP-EHCI Host Controller
[  20.298950] Bluetooth: BlueFRITZ! USB driver ver 1.2                                                             
+
[36909.199218] usb usb2: Manufacturer: Linux 2.6.32 ehci_hcd
[  20.304199] usbcore: registered new interface driver bfusb                                                       
+
[36909.204650] usb usb2: SerialNumber: ehci-omap.0
[  20.309967] Bluetooth: Generic Bluetooth USB driver ver 0.4                                                     
+
[36909.209869] hub 2-0:1.0: USB hub found
[  20.316009] usbcore: registered new interface driver btusb                                                       
+
[36909.213714] hub 2-0:1.0: 3 ports detected
[  20.321563] Bluetooth: Generic Bluetooth SDIO driver ver 0.1                                                     
+
[36909.244354] Initializing USB Mass Storage driver...
[  20.328247] mmci-omap-hs mmci-omap-hs.0: Failed to get debounce clock                                           
+
[36909.249420] usbcore: registered new interface driver usb-storage
[  20.440093] mmci-omap-hs mmci-omap-hs.1: Failed to get debounce clock                                           
+
[36909.255523] USB Mass Storage support registered.
[   20.446685] regulator: Unable to get requested regulator: vmmc_aux                                               
+
[36909.260528] mice: PS/2 mouse device common for all mice
[   20.455291] Registered led device: beagleboard::usr0                                                             
+
[36909.266174] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[   20.460571] Registered led device: beagleboard::usr1                                                             
+
[36909.273986] input: twl4030_pwrbutton as /devices/platform/i2c_omap.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1
[   20.471374] usbcore: registered new interface driver usbhid                                                      
+
[36909.284698] i2c /dev entries driver
[   20.477020] usbhid: v2.6:USB HID core driver                                                                    
+
[36909.288787] Linux video capture interface: v2.00
[   20.482543] Advanced Linux Sound Architecture Driver Version 1.0.18a.                                            
+
[36909.293762] omap-iommu omap-iommu.0: isp: version 1.1
[   20.489898] usbcore: registered new interface driver snd-usb-audio                                              
+
[36909.300140] vpfe_init
[   20.496551] No device for DAI twl4030                                                                           
+
[36909.303009] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[   20.500274] No device for DAI omap-mcbsp-dai-0                                                                  
+
[36909.416534] mmci-omap-hs mmci-omap-hs.1: err -16 configuring card detect
[   20.504913] No device for DAI omap-mcbsp-dai-1                                                                  
+
[36909.423553] Registered led device: beagleboard::usr0
[   20.509399] No device for DAI omap-mcbsp-dai-2                                                                  
+
[36909.428710] Registered led device: beagleboard::usr1
[   20.513977] No device for DAI omap-mcbsp-dai-3                                                                  
+
[36909.435241] Registered led device: beagleboard::pmu_stat
[   20.518493] No device for DAI omap-mcbsp-dai-4                                                                  
+
[36909.442291] usbcore: registered new interface driver usbhid
[   20.522979] OMAP3 Beagle SoC init                                                                                
+
[36909.447967] usbhid: USB HID core driver
[   20.526733] TWL4030 Audio Codec init                                                                             
+
[36909.451995] Advanced Linux Sound Architecture Driver Version 1.0.21.
[  20.531555] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok                                                        
+
[36909.458923] usbcore: registered new interface driver snd-usb-audio
[   20.545837] ALSA device list:                                                                                    
+
[36909.541015] usb 2-2: new high speed USB device using ehci-omap and address 2
[   20.548858]  #0: omap3beagle (twl4030)                                                                          
+
[36909.548767] No device for DAI omap-mcbsp-dai-0
[   20.553192] oprofile: using arm/armv7                                                                            
+
[36909.553283] No device for DAI omap-mcbsp-dai-1
[   20.557220] TCP cubic registered                                                                                
+
[36909.557800] No device for DAI omap-mcbsp-dai-2
[   20.560485] NET: Registered protocol family 17                                                                  
+
[36909.562255] No device for DAI omap-mcbsp-dai-3
[   20.565032] NET: Registered protocol family 15                                                                  
+
[36909.566772] No device for DAI omap-mcbsp-dai-4
[   20.569580] Bluetooth: L2CAP ver 2.11                                                                           
+
[36909.571228] OMAP3 Beagle SoC init
[  20.573303] Bluetooth: L2CAP socket layer initialized                                                           
+
[36909.575408] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
[  20.578430] Bluetooth: SCO (Voice Link) ver 0.6                                                                 
+
[36909.586822] ALSA device list:
[  20.583038] Bluetooth: SCO socket layer initialized                                                             
+
[36909.589874]  #0: omap3beagle (twl4030)
[  20.593780] Bluetooth: RFCOMM socket layer initialized                                                           
+
[36909.593811] oprofile: using arm/armv7
[  20.599060] Bluetooth: RFCOMM TTY layer initialized                                                             
+
[36909.597778] TCP cubic registered
[  20.604095] Bluetooth: RFCOMM ver 1.10                                                                           
+
[36909.601043] NET: Registered protocol family 17
[  20.607879] Bluetooth: BNEP (Ethernet Emulation) ver 1.3                                                         
+
[36909.605590] NET: Registered protocol family 15
[  20.613281] Bluetooth: BNEP filters: protocol multicast                                                         
+
[36909.610137] lib80211: common routines for IEEE802.11 drivers
[  20.618560] Bluetooth: HIDP (Human Interface Emulation) ver 1.2                                                 
+
[36909.615875] ThumbEE CPU extension supported.
[  20.627746] RPC: Registered udp transport module.                                                               
+
[36909.620208] Power Management for TI OMAP3.
[  20.632507] RPC: Registered tcp transport module.                                                               
+
[36909.625610] Unable to set L3 frequency (400000000)
[  20.637634] lib80211: common routines for IEEE802.11 drivers                                                    
+
[36909.630554] Switched to new clocking rate (Crystal/Core/MPU): 26.0/332/1000 MHz
[   20.643463] ThumbEE CPU extension supported.                                                                    
+
[36909.637908] IVA2 clocking rate: 800 MHz
[   20.647766] Power Management for TI OMAP3.                                                                      
+
[36909.806671] SmartReflex driver initialized
[   20.658599] Disabling unused clock "sr2_fck"                                                                     
+
[36909.810913] omap3beaglelmb: Driver registration complete
[   20.662933] Disabling unused clock "sr1_fck"                                                                     
+
[36909.821685] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[  20.667266] Disabling unused clock "mcbsp_fck"                                                                   
+
[36909.829986] registered taskstats version 1
[   20.671783] Disabling unused clock "mcbsp_fck"                                                                   
+
[36909.869476] usb 2-2: New USB device found, idVendor=0424, idProduct=9514
[   20.676300] Disabling unused clock "mcbsp_fck"                                                                   
+
[36909.876220] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   20.680786] Disabling unused clock "mcbsp_ick"                                                                   
+
[36909.884613] hub 2-2:1.0: USB hub found
[   20.685302] Disabling unused clock "mcbsp_ick"                                                                   
+
[36909.888610] hub 2-2:1.0: 5 ports detected
[  20.689788] Disabling unused clock "mcbsp_ick"                                                                   
+
[36909.966461] Console: switching to colour frame buffer device 160x45
[   20.694274] Disabling unused clock "gpt2_ick"                                                                   
+
[36909.988281] regulator_init_complete: incomplete constraints, leaving VAUX4 on
[   20.698730] Disabling unused clock "gpt3_ick"                                                                   
+
[36909.995666] regulator_init_complete: incomplete constraints, leaving VAUX3 on
[   20.703125] Disabling unused clock "gpt4_ick"                                                                   
+
[36910.003204] regulator_init_complete: incomplete constraints, leaving VDAC on
[   20.707550] Disabling unused clock "gpt5_ick"                                                                   
+
[36910.011108] omap_vout omap_vout: probed for an unknown device
[  20.711944] Disabling unused clock "gpt6_ick"                                                                   
+
[36910.017272] Waiting for root device /dev/mmcblk0p2...
[   20.716369] Disabling unused clock "gpt7_ick"                                                                   
+
[36910.041046] mmc0: new high speed SDHC card at address 256a
[  20.720794] Disabling unused clock "gpt8_ick"                                                                   
+
[36910.046905] mmcblk0: mmc0:256a SD04G 3.69 GiB
[   20.725189] Disabling unused clock "gpt9_ick"                                                                   
+
[36910.051666] mmcblk0: p1 p2
[   20.729827] Disabling unused clock "wdt3_ick"                                                                   
+
[36910.131317] EXT3-fs (mmcblk0p2): warning: maximal mount count reached, running e2fsck is recommended
[   20.734222] Disabling unused clock "wdt3_fck"                                                                   
+
[36910.140655] kjournald starting. Commit interval 5 seconds
[   20.738647] Disabling unused clock "gpio2_dbck"                                                                 
+
[36910.205352] usb 2-2.1: new high speed USB device using ehci-omap and address 3
[   20.743225] Disabling unused clock "gpio3_dbck"                                                                 
+
[36910.330596] usb 2-2.1: New USB device found, idVendor=0424, idProduct=ec00
[   20.747802] Disabling unused clock "gpio4_dbck"                                                                 
+
[36910.337524] usb 2-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  20.752410] Disabling unused clock "gpio5_dbck"                                                                 
+
[36910.347656] smsc95xx v1.0.4
[  20.756988] Disabling unused clock "gpio6_dbck"                                                                 
+
[36910.401550] usb0: register 'smsc95xx' at usb-ehci-omap.0-2.1, smsc95xx USB 2.0 Ethernet, 0a:08:ad:97:5f:11
[  20.761596] Disabling unused clock "gpt9_fck"                                                                   
+
[36910.412902] EXT3-fs (mmcblk0p2): using internal journal
[   20.765991] Disabling unused clock "gpt8_fck"                                                                   
+
[36910.418243] EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode
[   20.770416] Disabling unused clock "gpt7_fck"                                                                   
+
[36910.425445] VFS: Mounted root (ext3 filesystem) on device 179:2.
[  20.774810] Disabling unused clock "gpt6_fck"                                                                   
+
[36910.433624] devtmpfs: mounted
[   20.779235] Disabling unused clock "gpt5_fck"                                                                   
+
[36910.436645] Freeing init memory: 204K
[   20.783660] Disabling unused clock "gpt4_fck"                                                                   
+
INIT: version 2.86 booting
[   20.788055] Disabling unused clock "gpt3_fck"                                                                   
+
[36910.650848] usb 2-2.2: new high speed USB device using ehci-omap and address 4
[  20.792480] Disabling unused clock "gpt2_fck"                                                                   
+
[36910.778320] usb 2-2.2: New USB device found, idVendor=1415, idProduct=2000
[   20.796875] Disabling unused clock "gpt1_ick"                                                                   
+
[36910.785797] usb 2-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  20.801300] Disabling unused clock "wdt1_ick"                                                                   
+
[36910.793212] usb 2-2.2: Product: USB Camera-B4.04.27.1
[   20.805694] Disabling unused clock "wdt2_ick"                                                                   
+
[36910.798309] usb 2-2.2: Manufacturer: OmniVision Technologies, Inc.
[  20.810119] Disabling unused clock "wdt2_fck"                                                                   
+
Please wait: booting...
[   20.814544] Disabling unused clock "gpio1_dbck"                                                                 
+
[36910.900756] usb 2-2.3: new low speed USB device using ehci-omap and address 5
[  20.819122] Disabling unused clock "gpt1_fck"                                                                   
+
Starting udev
[   20.823730] Disabling unused clock "cam_ick"                                                                     
+
[36911.046051] usb 2-2.3: New USB device found, idVendor=046d, idProduct=c016
[  20.828063] Disabling unused clock "cam_mclk"                                                                   
+
[36911.054107] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  20.832519] Disabling unused clock "des1_ick"                                                                   
+
[36911.062255] usb 2-2.3: Product: Optical USB Mouse
[   20.836914] Disabling unused clock "sha11_ick"                                                                   
+
[36911.067626] usb 2-2.3: Manufacturer: Logitech
[  20.841430] Disabling unused clock "rng_ick"                                                                     
+
[36911.079711] input: Logitech Optical USB Mouse as /devices/platform/ehci-omap.0/usb2/2-2/2-2.3/2-2.3:1.0/input/input2
[  20.845764] Disabling unused clock "aes1_ick"                                                                   
+
[36911.091003] generic-usb 0003:046D:C016.0001: input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-ehci-omap.0-2.3/input0
[  20.850158] Disabling unused clock "ssi_ick"                                                                     
+
[36911.346069] usb 2-2.5: new low speed USB device using ehci-omap and address 6
[   20.854492] Disabling unused clock "mailboxes_ick"                                                               
+
[36911.514739] usb 2-2.5: New USB device found, idVendor=04f3, idProduct=0103
[   20.859313] Disabling unused clock "mcbsp_ick"                                                                   
+
[36911.730224] usb 2-2.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   20.863830] Disabling unused clock "mcbsp_ick"                                                                   
+
[36912.233825] input: HID 04f3:0103 as /devices/platform/ehci-omap.0/usb2/2-2/2-2.5/2-2.5:1.0/input/input3
[  20.868316] Disabling unused clock "gpt10_ick"                                                                   
+
[36913.118255] generic-usb 0003:04F3:0103.0002: input: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-ehci-omap.0-2.5/input0
[   20.872833] Disabling unused clock "gpt11_ick"                                                                   
+
[36914.611968] input: HID 04f3:0103 as /devices/platform/ehci-omap.0/usb2/2-2/2-2.5/2-2.5:1.1/input/input4
[   20.877349] Disabling unused clock "hdq_ick"                                                                     
+
[36915.341217] generic-usb 0003:04F3:0103.0003: input: USB HID v1.10 Device [HID 04f3:0103] on usb-ehci-omap.0-2.5/input1
[  20.881652] Disabling unused clock "mspro_ick"                                                                   
+
[36918.745086] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[  20.886169] Disabling unused clock "des2_ick"                                                                   
+
[36919.759979] gspca: main v2.8.0 registered
[  20.890563] Disabling unused clock "sha12_ick"                                                                   
+
[36919.772033] gspca: probing 1415:2000
[  20.895080] Disabling unused clock "aes2_ick"                                                                   
+
[36919.950317] ov534: Sensor ID: 7721
[  20.899475] Disabling unused clock "icr_ick"                                                                     
+
[36920.024963] ov534: frame_rate: 30
[  20.903808] Disabling unused clock "pka_ick"                                                                     
+
[36920.086822] gspca: /dev/video0 created
[  20.908111] Disabling unused clock "ssi_ssr_fck"                                                                 
+
[36920.107513] usbcore: registered new interface driver ov534
[  20.912811] Disabling unused clock "hdq_fck"                                                                     
+
[36920.174224] ov534: registered
[  20.917327] Disabling unused clock "mcbsp_fck"                                                                   
+
Remounting root file system...
[  20.921813] Disabling unused clock "mcbsp_fck"                                                                   
+
Caching udev devnodes
[  20.926330] Disabling unused clock "mspro_fck"                                                                   
+
Populating dev cache
[  20.930816] Disabling unused clock "gpt11_fck"                                                                   
+
[36925.205932] Bluetooth: Core ver 2.15
[  20.935333] Disabling unused clock "gpt10_fck"                                                                   
+
[36925.210449] NET: Registered protocol family 31
[  20.939849] Disabling unused clock "dpll4_m6x2_ck"                                                               
+
[36925.214996] Bluetooth: HCI device and connection manager initialized
[  20.944702] Disabling unused clock "dpll3_m3x2_ck"                                                               
+
[36925.221435] Bluetooth: HCI socket layer initialized
[  20.949554] Disabling unused clock "sys_clkout1"                                                                 
+
[36925.241821] Bluetooth: L2CAP ver 2.14
[  20.954254] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1                             
+
[36925.245574] Bluetooth: L2CAP socket layer initialized
[  20.968780] registered taskstats version 1                                                                       
+
[36925.264862] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[   20.974121] fbcvt: 1024x768@60: CVT Name - .786M3-R                                                             
+
[36925.382537] NET: Registered protocol family 10
[  21.001678] Console: switching to colour frame buffer device 128x48                                             
+
[36925.449066] NET: Registered protocol family 23
[   21.019104] clock: clksel_round_rate_div: dpll4_m4_ck target_rate 48000000                                       
+
[36925.468597] IrCOMM protocol (Dag Brattli)
[  21.026214] clock: new_div = 9, new_rate = 48000000                                                             
+
[36925.565948] Bluetooth: RFCOMM TTY layer initialized
[   21.034088] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)                                             
+
[36925.570861] Bluetooth: RFCOMM socket layer initialized
[   21.056976] mmc0: new high speed SD card at address 1145                                                         
+
[36925.576141] Bluetooth: RFCOMM ver 1.11
[  21.063049] mmcblk0: mmc0:1145 SD02G 1.83 GiB                                                                   
+
ALSA: Restoring mixer settings...
[  21.067962]  mmcblk0: p1 p2                                                                                     
+
Configuring network interfaces... No state is present for card CameraB404271
[  21.294006] eth0 (asix): not using net_device_ops yet                                                           
+
Unknown hardware: "USB-Audio" "USB Mixer" "USB1415:2000" "" ""
[   21.299926] eth0: register 'asix' at usb-ehci-omap.0-2.2, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:06:c4:57       
+
Hardware is initialized using a guess method
[   21.393066] usb 1-2.4: new high speed USB device using ehci-omap and address 4                                   
+
/usr/share/alsa/init/default:53: control element not found
[   21.518951] usb 1-2.4: configuration #1 chosen from 1 choice                                                     
+
/usr/share/alsa/init/default:53: control element not found
[  21.526580] hub 1-2.4:1.0: USB hub found                                                                        
+
No state is present for card CameraB404271
[   21.531372] hub 1-2.4:1.0: 4 ports detected                                                                     
+
eth0: unknown interface: No such device
[   21.823577] usb 1-2.4.1: new low speed USB device using ehci-omap and address 5                                 
+
eth0: unknown interface: No such device
[   21.953704] usb 1-2.4.1: configuration #1 chosen from 1 choice                                                   
+
eth0      No such device
[   21.967559] input: Logitech Optical USB Mouse as /devices/platform/ehci-omap.0/usb1/1-2/1-2.4/1-2.4.1/1-2.4.1:1.02
+
 
[   21.986114] generic-usb 0003:046D:C016.0001: input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-ehci-0
+
Internet Systems Consortium DHCP Client V3.1.2p1
[   22.088409] usb 1-2.4.2: new low speed USB device using ehci-omap and address 6                                  
+
Copyright 2004-2009 Internet Systems Consortium.
[   22.219512] usb 1-2.4.2: configuration #1 chosen from 1 choice                                                   
+
All rights reserved.
[   22.235900] input: HID 04f3:0103 as /devices/platform/ehci-omap.0/usb1/1-2/1-2.4/1-2.4.2/1-2.4.2:1.0/input/input3  
+
For info, please visit http://www.isc.org/sw/dhcp/
[   22.250885] generic-usb 0003:04F3:0103.0002: input: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-ehci-omap.0-2.40
+
Usage: dhclient [-1dqrx] [-nw] [-p <port>] [-s server]
[   22.276123] input: HID 04f3:0103 as /devices/platform/ehci-omap.0/usb1/1-2/1-2.4/1-2.4.2/1-2.4.2:1.1/input/input4  
+
                [-cf config-file] [-lf lease-file][-pf pid-file] [-e VAR=val]
[   22.292663] generic-usb 0003:04F3:0103.0003: input: USB HID v1.10 Device [HID 04f3:0103] on usb-ehci-omap.0-2.4.21
+
                [-sf script-file] [interface]
[   26.784179] kjournald starting. Commit interval 5 seconds                                                       
+
 
[   26.829589] EXT3 FS on mmcblk0p2, internal journal                                                               
+
If you did not get this software from ftp.isc.org, please
[   26.839569] EXT3-fs: recovery complete.                                                                          
+
get the latest from ftp.isc.org and install that before
[   27.092559] EXT3-fs: mounted filesystem with ordered data mode.                                                  
+
requesting help.
[   27.103057] VFS: Mounted root (ext3 filesystem) on device 179:2.                                                
+
 
[   27.113800] Freeing init memory: 204K                                                                           
+
If you did get this software from ftp.isc.org and have not
[   34.775878] uncorrectable error : <3>end_request: I/O error, dev mtdblock0, sector 0                             
+
yet read the README, please read it before requesting help.
[   34.783721] Buffer I/O error on device mtdblock0, logical block 0                                               
+
If you intend to request help from the dhcp-server@isc.org
[   35.148834] uncorrectable error : <3>end_request: I/O error, dev mtdblock0, sector 8                             
+
mailing list, please read the section on the README about
[   35.156768] Buffer I/O error on device mtdblock0, logical block 1                                                
+
submitting bug reports and requests for help.
[   35.267791] uncorrectable error : <3>end_request: I/O error, dev mtdblock0, sector 16                           
+
 
[   35.275726] Buffer I/O error on device mtdblock0, logical block 2                                               
+
Please do not under any circumstances send requests for
[   35.331329] uncorrectable error : <3>end_request: I/O error, dev mtdblock0, sector 24                           
+
help directly to the authors of this software - please
[   35.339263] Buffer I/O error on device mtdblock0, logical block 3                                               
+
send them to the appropriate mailing list as described in
[   35.394592] uncorrectable error : <3>end_request: I/O error, dev mtdblock0, sector 0                             
+
the README file.
[  35.402435] Buffer I/O error on device mtdblock0, logical block 0                                               
+
 
[   36.684143] FAT: IO charset iso8859-1 not found                                                                 
+
exiting.
[   39.959899] ipv6: disagrees about version of symbol struct_module                                               
+
Failed to bring up eth0.
[   39.994750] irda: disagrees about version of symbol struct_module                                               
+
usb0      no wireless extensions.
[  40.005432] ircomm: disagrees about version of symbol struct_module                                             
+
 
[  40.017547] ircomm_tty: disagrees about version of symbol struct_module                                         
+
Internet Systems Consortium DHCP Client V3.1.2p1
[   41.687622] eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1                                                     
+
Copyright 2004-2009 Internet Systems Consortium.
[   41.948944] eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1                                                     
+
All rights reserved.
[   42.976959] ipv6: disagrees about version of symbol struct_module                                               
+
For info, please visit http://www.isc.org/sw/dhcp/
[   43.062438] ipv6: disagrees about version of symbol struct_module                                               
+
Usage: dhclient [-1dqrx] [-nw] [-p <port>] [-s server]
44.849395] ipv6: disagrees about version of symbol struct_module                                               
+
                [-cf config-file] [-lf lease-file][-pf pid-file] [-e VAR=val]
[   45.715362] ipv6: disagrees about version of symbol struct_module                                               
+
                [-sf script-file] [interface]
[   45.858184] ipv6: disagrees about version of symbol struct_module                                               
+
 
[   45.925842] ipv6: disagrees about version of symbol struct_module                                               
+
If you did not get this software from ftp.isc.org, please
46.094299] ipv6: disagrees about version of symbol struct_module                                               
+
get the latest from ftp.isc.org and install that before
                                                                                                                   
+
requesting help.
.-------.                                                                                                          
+
 
|      |                  .-.                                                                                      
+
If you did get this software from ftp.isc.org and have not
|  |  |-----.-----.-----.| |  .----..-----.-----.                                                                
+
yet read the README, please read it before requesting help.
|      |    | __  |  ---'| '--.|  .-'|    |    |                                                                
+
If you intend to request help from the dhcp-server@isc.org
|  |  |  |  |    |---  ||  --'|  |  |  '  | | | |                                                                
+
mailing list, please read the section on the README about
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'                                                                
+
submitting bug reports and requests for help.
                 -'  |                                                                                              
+
 
                 '---'                                                                                              
+
Please do not under any circumstances send requests for
                                                                                                                   
+
help directly to the authors of this software - please
The Angstrom Distribution beagleboard ttyS2                                                                        
+
send them to the appropriate mailing list as described in
                                                                                                                   
+
the README file.
Angstrom 2009.X-stable beagleboard ttyS2                                                                            
+
 
                                                                                                                   
+
exiting.
beagleboard login:  
+
Failed to bring up usb0.
 +
done.
 +
Starting portmap daemon: portmap.
 +
net.ipv4.conf.default.rp_filter = 1
 +
net.ipv4.conf.all.rp_filter = 1
 +
INIT: Entering runlevel: 5
 +
Starting system message bus: dbus.
 +
Starting Hardware abstraction layer hald
 +
[36930.477539] usb0: link up, 100Mbps, full-duplex, lpa 0x45E1
 +
Configuring leds:
 +
   beagleboard::pmu_stat: none
 +
  beagleboard::usr0: heartbeat
 +
  beagleboard::usr1: mmc0
 +
Starting Dropbear SSH server: dropbear.
 +
Starting advanced power management daemon: No APM support in kernel
 +
(failed.)
 +
Starting Samba: smbd nmbd.
 +
Starting syslogd/klogd: done
 +
Starting internet superserver: xinetd.
 +
* Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
 +
[ ok ]
 +
Starting Network connection manager daemon: NetworkManager.
 +
Loading kernel modules for gstreamer-ti...
 +
Running /usr/share/ti/gst/omap3530/loadmodules.sh[36935.634857] CMEMK module: built on Aug 18 2010 at 15:55:46
 +
[36935.640380]   Reference Linux version 2.6.32
 +
[36935.645050]   File /mnt/angstrom-setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-linuxutils-1_2_25_01_06-r88d/linuxutils_2_25_01_06/packages/ti/sdo/linuxutils/cmem/src/module/cmemk.c
 +
[36935.668823] CMEM Range Overlaps Kernel Physical - allowing overlap
 +
[36935.675384] CMEM phys_start (0x86300000) overlaps kernel (0x80000000 -> 0x9d000000)
 +
[36935.684051] allocated heap buffer 0xe3000000 of size 0x53d000
 +
[36935.690124] cmemk initialized
 +
[36935.720001] DSPLINK Module (1.64) created on Date: Aug 18 2010 Time: 15:59:07
 +
[36935.776153] SDMAK module: built on Aug 18 2010 at 15:56:01
 +
[36935.781677]  Reference Linux version 2.6.32
 +
[36935.786376]   File /mnt/angstrom-setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-linuxutils-1_2_25_01_06-r88d/linuxutils_2_25_01_06/packages/ti/sdo/linuxutils/sdma/src/module/sdmak.c
 +
  done
 +
Starting PVR
 +
[36936.153930] PVRSRV_PIXEL_FORMAT_ARGB8888
 +
/etc/rc5.d/S81cups: line 232: echo_success: not found
 +
cups: started scheduler.
 +
Starting GNOME Display Manager gdm
 +
 
 +
.-------.                                          
 +
|      |                  .-.                    
 +
|  |  |-----.-----.-----.| |  .----..-----.-----.
 +
|      |    | __  |  ---'| '--.|  .-'|    |    |
 +
|  |  |  |  |    |---  ||  --'|  |  |  '  | | | |
 +
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
 +
                 -'  |
 +
                 '---'
 +
 
 +
The Angstrom Distribution beagleboard ttyS2
 +
 
 +
Angstrom 2010.7-test-20100820 beagleboard ttyS2
 +
 
 +
beagleboard login: root
 +
root@beagleboard:~# 
 
</pre>
 
</pre>
 
|-
 
|-

Latest revision as of 21:16, 3 October 2013


Number Page Caption Listing
5-1 5-2 Final Kernel Build Sequence: ARM/BeagleBoard
host$ source ~/crossCompileEnv.sh
host$ make -j3 uImage
... < many build steps omitted for clarity >
  LD      vmlinux
  SORTEX  vmlinux
sort done marker at 81c420
  SYSMAP  System.map
  OBJCOPY arch/arm/boot/Image
  Kernel: arch/arm/boot/Image is ready
  AS      arch/arm/boot/compressed/head.o
  XZKERN  arch/arm/boot/compressed/piggy.xzkern
  CC      arch/arm/boot/compressed/misc.o
  CC      arch/arm/boot/compressed/decompress.o
  CC      arch/arm/boot/compressed/string.o
  SHIPPED arch/arm/boot/compressed/hyp-stub.S
  AS      arch/arm/boot/compressed/lib1funcs.o
  AS      arch/arm/boot/compressed/ashldi3.o
  AS      arch/arm/boot/compressed/hyp-stub.o
  AS      arch/arm/boot/compressed/piggy.xzkern.o
  LD      arch/arm/boot/compressed/vmlinux
  OBJCOPY arch/arm/boot/zImage
  Kernel: arch/arm/boot/zImage is ready
  UIMAGE  arch/arm/boot/uImage
Image Name:   Linux-3.8.13+
Created:      Thu Oct  3 17:13:18 2013
Image Type:   ARM Linux Kernel Image (uncompressed)
Data Size:    2898464 Bytes = 2830.53 kB = 2.76 MB
Load Address: 80008000
Entry Point:  80008000
  Image arch/arm/boot/uImage is ready
5-2 5-5 Assembly File .../arch/arm/boot/compressed/piggy.S
	.section .piggydata,#alloc
	.globl	input_data
input_data:
	.incbin	"arch/arm/boot/compressed/piggy.gz"
	.globl	input_data_end
input_data_end:
5-3 106 Final Kernel Build Sequence: ARM/BeagleBoard
Texas Instruments X-Loader 1.4.4ss (Aug 19 2010 - 02:49:27)
Beagle xM Rev A
Reading boot sector
Loading u-boot.bin from mmc


U-Boot 2010.03-dirty (Aug 20 2010 - 20:50:46)

OMAP3630/3730-GP ES1.0, CPU-OPP2, L3-165MHz, 
OMAP3 Beagle board + LPDDR/NAND
I2C:   ready
DRAM:  512 MB
NAND:  0 MiB
*** Warning - bad CRC or NAND, using default environment

In:    serial
Out:   serial
Err:   serial

Probing for expansion boards, if none are connected you'll see a harmless I2C error.

No EEPROM on expansion board
Beagle xM Rev A
Die ID #34780000061000000156166b0a02300a
Hit any key to stop autoboot:  3 ��� 2 ��� 1 ��� 0 
mmc1 is available
The user button is currently NOT pressed.
reading boot.scr

687 bytes read
Running bootscript from mmc ...
## Executing script at 80200000
mmc1 is available
reading uImage

3193476 bytes read
Booting from mmc ...
## Booting kernel from Legacy Image at 80200000 ...
   Image Name:   Angstrom/2.6.32/beagleboard
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3193412 Bytes =  3 MB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux................................................................................................................................................................................................................ done, booting the kernel.
[    0.000000] Linux version 2.6.32 (daniel@kids-laptop) (gcc version 4.3.3 (GCC) ) #3 PREEMPT Tue Nov 2 18:38:11 CDT 2010
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine: OMAP3 Beagle Board
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] OMAP3630/DM3730 ES1.0 (l2cache iva sgx neon isp 192mhz_clk )
[    0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
[    0.000000] Reserving 16777216 bytes SDRAM for VRAM
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 117760
[    0.000000] Kernel command line: console=ttyS2,115200n8 mem=80M@0x80000000 mem=384M@0x88000000 mpurate=1000 buddy=none camera=lbcm3m1 vram=16M omapfb.vram=0:8M,1:4M,2:4M omapfb.mode=dvi:hd720 omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait
[    0.000000] Beagle expansionboard: none
[    0.000000] Beagle cameraboard: lbcm3m1
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 80MB 384MB = 464MB total
[    0.000000] Memory: 447360KB available (5880K code, 671K data, 204K init, 0K highmem)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:402
[    0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
[    0.000000] Reprogramming SDRC clock to 332000000 Hz
[    0.000000] GPMC revision 5.0
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[    0.000000] Total of 96 interrupts on 1 active controller
[    0.000000] OMAP GPIO hardware version 2.5
[    0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
[    0.000000] Console: colour dummy device 80x30
[    0.000000] Calibrating delay loop... 533.58 BogoMIPS (lpj=2084864)
[    0.000000] Mount-cache hash table entries: 512
[    0.000000] CPU: Testing write buffer coherency: ok
[    0.000000] tmpfs: No value for mount option 'mode'
[    0.000000] devtmpfs: initialized
[    0.000000] regulator: core version 0.5
[    0.000000] NET: Registered protocol family 16
[    0.000000] Beagle cameraboard: registering i2c2 bus for lbcm3m1
[    0.000000] Found NAND on CS0
[    0.000000] Registering NAND on CS0
[    0.000000] Unable to get DVI reset GPIO
[    0.000000] omap_init_mbox: platform not supported
[    0.000000] Target VDD1 OPP = 4, VDD2 OPP = 2
[36907.893096] OMAP DMA hardware revision 5.0
[36907.899261] bio: create slab <bio-0> at 0
[36907.900482] SCSI subsystem initialized
[36907.901763] usbcore: registered new interface driver usbfs
[36907.901916] usbcore: registered new interface driver hub
[36907.902069] usbcore: registered new device driver usb
[36907.902435] i2c_omap i2c_omap.1: bus 1 rev4.0 at 2600 kHz
[36907.905120] twl4030: PIH (irq 7) chaining IRQs 368..375
[36907.905151] twl4030: power (irq 373) chaining IRQs 376..383
[36907.905426] twl4030: gpio (irq 368) chaining IRQs 384..401
[36907.907104] regulator: VUSB1V5: 1500 mV normal standby
[36907.907348] regulator: VUSB1V8: 1800 mV normal standby
[36907.907562] regulator: VUSB3V1: 3100 mV normal standby
[36907.908782] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[36907.909149] regulator: VMMC1: 1850 <--> 3150 mV normal standby
[36907.909423] regulator: VDAC: 1800 mV normal standby
[36907.909637] regulator: VPLL2: 1800 mV normal standby
[36907.909881] regulator: VSIM: 1800 <--> 3000 mV normal standby
[36907.910217] regulator: VAUX3: 1800 mV normal standby
[36907.910614] regulator: VAUX4: 1800 mV normal standby
[36907.924316] i2c_omap i2c_omap.2: bus 2 rev4.0 at 400 kHz
[36907.938201] i2c_omap i2c_omap.3: bus 3 rev4.0 at 100 kHz
[36907.939392] Switching to clocksource 32k_counter
[36907.948394] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
[36907.952239] musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
[36907.952239] musb_hdrc musb_hdrc: MUSB HDRC host driver
[36907.952362] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
[36907.952514] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[36907.952514] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[36907.952545] usb usb1: Product: MUSB HDRC host driver
[36907.952545] usb usb1: Manufacturer: Linux 2.6.32 musb-hcd
[36907.952575] usb usb1: SerialNumber: musb_hdrc
[36907.953186] hub 1-0:1.0: USB hub found
[36907.953216] hub 1-0:1.0: 1 port detected
[36907.954254] NET: Registered protocol family 2
[36907.954467] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[36907.955017] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[36907.955474] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[36907.955688] TCP: Hash tables configured (established 16384 bind 16384)
[36907.955688] TCP reno registered
[36907.955718] UDP hash table entries: 256 (order: 0, 4096 bytes)
[36907.955749] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[36907.955993] NET: Registered protocol family 1
[36907.956420] RPC: Registered udp transport module.
[36907.956420] RPC: Registered tcp transport module.
[36907.956451] RPC: Registered tcp NFSv4.1 backchannel transport module.
[36907.957305] omap-iommu omap-iommu.0: isp registered
[36907.959014] VFS: Disk quotas dquot_6.5.2
[36907.959106] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[36907.960144] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[36907.960937] JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[36907.961730] msgmni has been set to 874
[36907.965515] alg: No test for stdrng (krng)
[36907.965789] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[36907.965820] io scheduler noop registered
[36907.965850] io scheduler deadline registered
[36907.965972] io scheduler cfq registered (default)
[36908.025604] OMAP DSS rev 2.0
[36908.025665] OMAP DISPC rev 3.0
[36908.025726] OMAP VENC rev 2
[36908.025970] OMAP DSI rev 1.0
[36908.362426] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[36908.381408] serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654
[36908.399780] serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654
[36908.418121] serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654
[36908.990447] console [ttyS2] enabled
[36909.000549] brd: module loaded
[36909.006866] loop: module loaded
[36909.011291] omap2-nand driver initializing
[36909.015655] No NAND device found!!!
[36909.019378] No NAND device found!!!
[36909.023864] usbcore: registered new interface driver catc
[36909.029357] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
[36909.035430] usbcore: registered new interface driver kaweth
[36909.041076] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
[36909.048675] usbcore: registered new interface driver pegasus
[36909.054382] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
[36909.061401] usbcore: registered new interface driver rtl8150
[36909.067199] usbcore: registered new interface driver asix
[36909.072723] usbcore: registered new interface driver cdc_ether
[36909.078643] usbcore: registered new interface driver dm9601
[36909.084350] usbcore: registered new interface driver smsc95xx
[36909.090240] usbcore: registered new interface driver gl620a
[36909.095947] usbcore: registered new interface driver net1080
[36909.101715] usbcore: registered new interface driver plusb
[36909.107330] usbcore: registered new interface driver rndis_host
[36909.113372] usbcore: registered new interface driver cdc_subset
[36909.119415] usbcore: registered new interface driver zaurus
[36909.125091] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[36909.133178] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[36909.139984] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[36909.146026] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 2
[36909.153625] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[36909.173797] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[36909.179687] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[36909.186553] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[36909.193847] usb usb2: Product: OMAP-EHCI Host Controller
[36909.199218] usb usb2: Manufacturer: Linux 2.6.32 ehci_hcd
[36909.204650] usb usb2: SerialNumber: ehci-omap.0
[36909.209869] hub 2-0:1.0: USB hub found
[36909.213714] hub 2-0:1.0: 3 ports detected
[36909.244354] Initializing USB Mass Storage driver...
[36909.249420] usbcore: registered new interface driver usb-storage
[36909.255523] USB Mass Storage support registered.
[36909.260528] mice: PS/2 mouse device common for all mice
[36909.266174] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[36909.273986] input: twl4030_pwrbutton as /devices/platform/i2c_omap.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1
[36909.284698] i2c /dev entries driver
[36909.288787] Linux video capture interface: v2.00
[36909.293762] omap-iommu omap-iommu.0: isp: version 1.1
[36909.300140] vpfe_init
[36909.303009] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[36909.416534] mmci-omap-hs mmci-omap-hs.1: err -16 configuring card detect
[36909.423553] Registered led device: beagleboard::usr0
[36909.428710] Registered led device: beagleboard::usr1
[36909.435241] Registered led device: beagleboard::pmu_stat
[36909.442291] usbcore: registered new interface driver usbhid
[36909.447967] usbhid: USB HID core driver
[36909.451995] Advanced Linux Sound Architecture Driver Version 1.0.21.
[36909.458923] usbcore: registered new interface driver snd-usb-audio
[36909.541015] usb 2-2: new high speed USB device using ehci-omap and address 2
[36909.548767] No device for DAI omap-mcbsp-dai-0
[36909.553283] No device for DAI omap-mcbsp-dai-1
[36909.557800] No device for DAI omap-mcbsp-dai-2
[36909.562255] No device for DAI omap-mcbsp-dai-3
[36909.566772] No device for DAI omap-mcbsp-dai-4
[36909.571228] OMAP3 Beagle SoC init
[36909.575408] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
[36909.586822] ALSA device list:
[36909.589874]   #0: omap3beagle (twl4030)
[36909.593811] oprofile: using arm/armv7
[36909.597778] TCP cubic registered
[36909.601043] NET: Registered protocol family 17
[36909.605590] NET: Registered protocol family 15
[36909.610137] lib80211: common routines for IEEE802.11 drivers
[36909.615875] ThumbEE CPU extension supported.
[36909.620208] Power Management for TI OMAP3.
[36909.625610] Unable to set L3 frequency (400000000)
[36909.630554] Switched to new clocking rate (Crystal/Core/MPU): 26.0/332/1000 MHz
[36909.637908] IVA2 clocking rate: 800 MHz
[36909.806671] SmartReflex driver initialized
[36909.810913] omap3beaglelmb: Driver registration complete
[36909.821685] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[36909.829986] registered taskstats version 1
[36909.869476] usb 2-2: New USB device found, idVendor=0424, idProduct=9514
[36909.876220] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[36909.884613] hub 2-2:1.0: USB hub found
[36909.888610] hub 2-2:1.0: 5 ports detected
[36909.966461] Console: switching to colour frame buffer device 160x45
[36909.988281] regulator_init_complete: incomplete constraints, leaving VAUX4 on
[36909.995666] regulator_init_complete: incomplete constraints, leaving VAUX3 on
[36910.003204] regulator_init_complete: incomplete constraints, leaving VDAC on
[36910.011108] omap_vout omap_vout: probed for an unknown device
[36910.017272] Waiting for root device /dev/mmcblk0p2...
[36910.041046] mmc0: new high speed SDHC card at address 256a
[36910.046905] mmcblk0: mmc0:256a SD04G 3.69 GiB 
[36910.051666]  mmcblk0: p1 p2
[36910.131317] EXT3-fs (mmcblk0p2): warning: maximal mount count reached, running e2fsck is recommended
[36910.140655] kjournald starting.  Commit interval 5 seconds
[36910.205352] usb 2-2.1: new high speed USB device using ehci-omap and address 3
[36910.330596] usb 2-2.1: New USB device found, idVendor=0424, idProduct=ec00
[36910.337524] usb 2-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[36910.347656] smsc95xx v1.0.4
[36910.401550] usb0: register 'smsc95xx' at usb-ehci-omap.0-2.1, smsc95xx USB 2.0 Ethernet, 0a:08:ad:97:5f:11
[36910.412902] EXT3-fs (mmcblk0p2): using internal journal
[36910.418243] EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode
[36910.425445] VFS: Mounted root (ext3 filesystem) on device 179:2.
[36910.433624] devtmpfs: mounted
[36910.436645] Freeing init memory: 204K
INIT: version 2.86 booting
[36910.650848] usb 2-2.2: new high speed USB device using ehci-omap and address 4
[36910.778320] usb 2-2.2: New USB device found, idVendor=1415, idProduct=2000
[36910.785797] usb 2-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[36910.793212] usb 2-2.2: Product: USB Camera-B4.04.27.1
[36910.798309] usb 2-2.2: Manufacturer: OmniVision Technologies, Inc.
Please wait: booting...
[36910.900756] usb 2-2.3: new low speed USB device using ehci-omap and address 5
Starting udev
[36911.046051] usb 2-2.3: New USB device found, idVendor=046d, idProduct=c016
[36911.054107] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[36911.062255] usb 2-2.3: Product: Optical USB Mouse
[36911.067626] usb 2-2.3: Manufacturer: Logitech
[36911.079711] input: Logitech Optical USB Mouse as /devices/platform/ehci-omap.0/usb2/2-2/2-2.3/2-2.3:1.0/input/input2
[36911.091003] generic-usb 0003:046D:C016.0001: input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-ehci-omap.0-2.3/input0
[36911.346069] usb 2-2.5: new low speed USB device using ehci-omap and address 6
[36911.514739] usb 2-2.5: New USB device found, idVendor=04f3, idProduct=0103
[36911.730224] usb 2-2.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[36912.233825] input: HID 04f3:0103 as /devices/platform/ehci-omap.0/usb2/2-2/2-2.5/2-2.5:1.0/input/input3
[36913.118255] generic-usb 0003:04F3:0103.0002: input: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-ehci-omap.0-2.5/input0
[36914.611968] input: HID 04f3:0103 as /devices/platform/ehci-omap.0/usb2/2-2/2-2.5/2-2.5:1.1/input/input4
[36915.341217] generic-usb 0003:04F3:0103.0003: input: USB HID v1.10 Device [HID 04f3:0103] on usb-ehci-omap.0-2.5/input1
[36918.745086] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[36919.759979] gspca: main v2.8.0 registered
[36919.772033] gspca: probing 1415:2000
[36919.950317] ov534: Sensor ID: 7721
[36920.024963] ov534: frame_rate: 30
[36920.086822] gspca: /dev/video0 created
[36920.107513] usbcore: registered new interface driver ov534
[36920.174224] ov534: registered
Remounting root file system...
Caching udev devnodes
Populating dev cache
[36925.205932] Bluetooth: Core ver 2.15
[36925.210449] NET: Registered protocol family 31
[36925.214996] Bluetooth: HCI device and connection manager initialized
[36925.221435] Bluetooth: HCI socket layer initialized
[36925.241821] Bluetooth: L2CAP ver 2.14
[36925.245574] Bluetooth: L2CAP socket layer initialized
[36925.264862] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[36925.382537] NET: Registered protocol family 10
[36925.449066] NET: Registered protocol family 23
[36925.468597] IrCOMM protocol (Dag Brattli)
[36925.565948] Bluetooth: RFCOMM TTY layer initialized
[36925.570861] Bluetooth: RFCOMM socket layer initialized
[36925.576141] Bluetooth: RFCOMM ver 1.11
ALSA: Restoring mixer settings...
Configuring network interfaces... No state is present for card CameraB404271
Unknown hardware: "USB-Audio" "USB Mixer" "USB1415:2000" "" ""
Hardware is initialized using a guess method
/usr/share/alsa/init/default:53: control element not found
/usr/share/alsa/init/default:53: control element not found
No state is present for card CameraB404271
eth0: unknown interface: No such device
eth0: unknown interface: No such device
eth0      No such device

Internet Systems Consortium DHCP Client V3.1.2p1
Copyright 2004-2009 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
Usage: dhclient [-1dqrx] [-nw] [-p <port>] [-s server]
                [-cf config-file] [-lf lease-file][-pf pid-file] [-e VAR=val]
                [-sf script-file] [interface]

If you did not get this software from ftp.isc.org, please
get the latest from ftp.isc.org and install that before
requesting help.

If you did get this software from ftp.isc.org and have not
yet read the README, please read it before requesting help.
If you intend to request help from the dhcp-server@isc.org
mailing list, please read the section on the README about
submitting bug reports and requests for help.

Please do not under any circumstances send requests for
help directly to the authors of this software - please
send them to the appropriate mailing list as described in
the README file.

exiting.
Failed to bring up eth0.
usb0      no wireless extensions.

Internet Systems Consortium DHCP Client V3.1.2p1
Copyright 2004-2009 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
Usage: dhclient [-1dqrx] [-nw] [-p <port>] [-s server]
                [-cf config-file] [-lf lease-file][-pf pid-file] [-e VAR=val]
                [-sf script-file] [interface]

If you did not get this software from ftp.isc.org, please
get the latest from ftp.isc.org and install that before
requesting help.

If you did get this software from ftp.isc.org and have not
yet read the README, please read it before requesting help.
If you intend to request help from the dhcp-server@isc.org
mailing list, please read the section on the README about
submitting bug reports and requests for help.

Please do not under any circumstances send requests for
help directly to the authors of this software - please
send them to the appropriate mailing list as described in
the README file.

exiting.
Failed to bring up usb0.
done.
Starting portmap daemon: portmap.
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
INIT: Entering runlevel: 5
Starting system message bus: dbus.
Starting Hardware abstraction layer hald
[36930.477539] usb0: link up, 100Mbps, full-duplex, lpa 0x45E1
Configuring leds:
  beagleboard::pmu_stat: none
  beagleboard::usr0: heartbeat
  beagleboard::usr1: mmc0
Starting Dropbear SSH server: dropbear.
Starting advanced power management daemon: No APM support in kernel
(failed.)
Starting Samba: smbd nmbd.
Starting syslogd/klogd: done
Starting internet superserver: xinetd.
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[ ok ]
Starting Network connection manager daemon: NetworkManager.
Loading kernel modules for gstreamer-ti... 
Running /usr/share/ti/gst/omap3530/loadmodules.sh[36935.634857] CMEMK module: built on Aug 18 2010 at 15:55:46
[36935.640380]   Reference Linux version 2.6.32
[36935.645050]   File /mnt/angstrom-setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-linuxutils-1_2_25_01_06-r88d/linuxutils_2_25_01_06/packages/ti/sdo/linuxutils/cmem/src/module/cmemk.c
[36935.668823] CMEM Range Overlaps Kernel Physical - allowing overlap
[36935.675384] CMEM phys_start (0x86300000) overlaps kernel (0x80000000 -> 0x9d000000)
[36935.684051] allocated heap buffer 0xe3000000 of size 0x53d000
[36935.690124] cmemk initialized
[36935.720001] DSPLINK Module (1.64) created on Date: Aug 18 2010 Time: 15:59:07
[36935.776153] SDMAK module: built on Aug 18 2010 at 15:56:01
[36935.781677]   Reference Linux version 2.6.32
[36935.786376]   File /mnt/angstrom-setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-linuxutils-1_2_25_01_06-r88d/linuxutils_2_25_01_06/packages/ti/sdo/linuxutils/sdma/src/module/sdmak.c
  done
Starting PVR
[36936.153930] PVRSRV_PIXEL_FORMAT_ARGB8888
/etc/rc5.d/S81cups: line 232: echo_success: not found
cups: started scheduler.
Starting GNOME Display Manager gdm

.-------.                                           
|       |                  .-.                      
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beagleboard ttyS2

Angstrom 2010.7-test-20100820 beagleboard ttyS2

beagleboard login: root
root@beagleboard:~#  
5-4 5-17 Console Setup Code Snippet from .../kernel/printk.c
/*
 * Set up a list of consoles.  Called from init/main.c
 */
static int __init console_setup(char *str)
{
	char buf[sizeof(console_cmdline[0].name) + 4]; /* 4 for index */
	char *s, *options, *brl_options = NULL;
	int idx;

        ...
        <body omitted for clarity...>
        ...
	return 1;
}
__setup("console=", console_setup);
5-5 5-18 Family of __setup Macro Definitions from .../include/linux/init.h
...
#define __setup_param(str, unique_id, fn, early)			\
	static char __setup_str_##unique_id[] __initdata __aligned(1) = str; \
	static struct obs_kernel_param __setup_##unique_id	\
		__used __section(.init.setup)			\
		__attribute__((aligned((sizeof(long)))))	\
		= { __setup_str_##unique_id, fn, early }

#define __setup(str, fn)					\
	__setup_param(str, fn, fn, 0)
...
5-6 5-19 Kernel Command Line Processing
     1	extern struct obs_kernel_param __setup_start[], __setup_end[];
     2	
     3	static int __init obsolete_checksetup(char *line)
     4	{
     5		struct obs_kernel_param *p;
     6		int had_early_param = 0;
     7	
     8		p = __setup_start;
     9		do {
    10			int n = strlen(p->str);
    11			if (!strncmp(line, p->str, n)) {
    12				if (p->early) {
    13					/* Already done in parse_early_param?
    14					 * (Needs exact match on param part).
    15					 * Keep iterating, as we can have early
    16					 * params and __setups of same names 8( */
    17					if (line[n] == '\0' || line[n] == '=')
    18						had_early_param = 1;
    19				} else if (!p->setup_func) {
    20					printk(KERN_WARNING "Parameter %s is obsolete,"
    21					       " ignored\n", p->str);
    22					return 1;
    23				} else if (p->setup_func(line + n))
    24					return 1;
    25			}
    26			p++;
    27		} while (p < __setup_end);
    28	
    29		return had_early_param;
    30	}
5-7 5-22 Example Initialization Routine - .../arch/arm/kernel/setup.c
static int __init customize_machine(void)
{
	/* customizes platform devices, or adds new ones */
	if (init_machine)
		init_machine();
	return 0;
}
arch_initcall(customize_machine);
5-8 5-22 initcall Family of Macros - .../include/linux/init.h
#define __define_initcall(level,fn,id) \
	static initcall_t __initcall_##fn##id __used \
	__attribute__((__section__(".initcall" level ".init"))) = fn

/*
 * Early initcalls run before initializing SMP.
 *
 * Only for built-in code, not modules.
 */
#define early_initcall(fn)		__define_initcall("early",fn,early)

/*
 * A "pure" initcall has no dependencies on anything else, and purely
 * initializes variables that couldn't be statically initialized.
 *
 * This only exists for built-in code, not for modules.
 */
#define pure_initcall(fn)		__define_initcall("0",fn,0)

#define core_initcall(fn)		__define_initcall("1",fn,1)
#define core_initcall_sync(fn)		__define_initcall("1s",fn,1s)
#define postcore_initcall(fn)		__define_initcall("2",fn,2)
#define postcore_initcall_sync(fn)	__define_initcall("2s",fn,2s)
#define arch_initcall(fn)		__define_initcall("3",fn,3)
#define arch_initcall_sync(fn)		__define_initcall("3s",fn,3s)
#define subsys_initcall(fn)		__define_initcall("4",fn,4)
#define subsys_initcall_sync(fn)	__define_initcall("4s",fn,4s)
#define fs_initcall(fn)			__define_initcall("5",fn,5)
#define fs_initcall_sync(fn)		__define_initcall("5s",fn,5s)
#define rootfs_initcall(fn)		__define_initcall("rootfs",fn,rootfs)
#define device_initcall(fn)		__define_initcall("6",fn,6)
#define device_initcall_sync(fn)	__define_initcall("6s",fn,6s)
#define late_initcall(fn)		__define_initcall("7",fn,7)
#define late_initcall_sync(fn)		__define_initcall("7s",fn,7s)

#define __initcall(fn) device_initcall(fn)
...
5-9 5-24 Creation of Kernel init Thread
static noinline void __init_refok rest_init(void)
	__releases(kernel_lock)
{
	int pid;

	kernel_thread(kernel_init, NULL, CLONE_FS | CLONE_SIGHAND);
	numa_default_policy();
	pid = kernel_thread(kthreadd, NULL, CLONE_FS | CLONE_FILES);
	kthreadd_task = find_task_by_pid_ns(pid, &init_pid_ns);
	unlock_kernel();

	/*
	 * The boot idle thread must execute schedule()
	 * at least once to get things moving:
	 */
	init_idle_bootup_task(current);
	rcu_scheduler_starting();
	preempt_enable_no_resched();
	schedule();
	preempt_disable();

	/* Call into cpu_idle with preempt disabled */
	cpu_idle();
}

5-10 5-25 Initialization via initcalls
extern initcall_t __initcall_start[], __initcall_end[], __early_initcall_end[];

static void __init do_initcalls(void)
{
	initcall_t *call;

	for (call = __early_initcall_end; call < __initcall_end; call++)
		do_one_initcall(*call);

	/* Make sure there is no pending stuff from the initcall sequence */
	flush_scheduled_work();
}
5-11 5-27 Final Boot Steps from main.c
static noinline int init_post(void)
{

<... lines trimmed for clarity ...>

	if (execute_command) {
		run_init_process(execute_command);
		printk(KERN_WARNING "Failed to execute %s.  Attempting "
					"defaults...\n", execute_command);
	}
	run_init_process("/sbin/init");
	run_init_process("/etc/init");
	run_init_process("/bin/init");
	run_init_process("/bin/sh");

	panic("No init found.  Try passing init= option to kernel.");
}