Difference between revisions of "ECE497 Notes on Installing the Eclipse IDE"

From eLinux.org
Jump to: navigation, search
(Created page with 'Category:ECE597 [http://www.eclipse.org/ Eclipse] is an open source Integrated Development Environment that's enjoying broad use. Here's how to run gdb on Beagle via Eclips…')
 
m
 
(36 intermediate revisions by 2 users not shown)
Line 1: Line 1:
[[Category:ECE597]]
+
See [[EBC_Exercise_14_gdb_Debugging#Eclipse.2C_gdb_and_remote_debuging]] for remote debugging via Eclispe.
  
[http://www.eclipse.org/ Eclipse] is an open source Integrated Development Environment that's enjoying broad use.
+
This was a work in progress that was never finished.  
  
Here's how to run gdb on Beagle via Eclipse
+
[http://www.lvr.com/eclipse5.htm This] may be a better starting place.
I'm doing this for Galileo which was released just yesterday (24-June-2009). apt-get eclipse doesn't get the newest version yet.
+
  
#### Downloading
+
== YouTube Video ==
Go to http://www.eclipse.org/downloads/ and download
+
"Eclipse IDE for C/C++ Developers (79 MB)"
+
I'm doing this for 32-bit Linux so I used:
+
http://www.eclipse.org/downloads/download.php?file=/technology/epp/downloads/release/galileo/R/eclipse-cpp-galileo-linux-gtk.tar.gz
+
  
Let the archive manager open it. It takes a minute or so to download.
+
[http://www.youtube.com/watch?v=vFv_-ykLppo&list=UUf_sAmhBw7Tj7-2ujmLFoQg&index=4&feature=plcp Here] is a video that says it will show how to use Eclipse for remote debugging.
Click Extract and put it in your favorite place.
+
  
#### Java
+
[http://download.eclipse.org/tm/downloads/drops/R-3.4-201205300905/ Here] is where you get the RSE-runtime.
Before running Eclipse on Ubuntu you need to download java.
+
There appears to be several you can download. I picked:
+
sudo apt-get install openjdk-6-jre-headless
+
  
once installed, open eclipse by
+
host$ '''sudo apt-get update'''
cd eclipse
+
host$ '''sudo apt-get install eclipse'''
./eclipse
+
host$ '''sudo apt-get install gcc-arm-linux-gnueabi'''
 +
host$ '''sudo apt-get install g++-arm-linux-gnueabi'''
 +
host$ '''sudo apt-get install gdb'''
 +
host$ '''sudo apt-get install gdb-multiarch'''
  
I like to put the workspace folder in the eclipse folder. Put yours whereever you would like it.
+
  beagle$ '''opkg update'''
 +
beagle$ '''opkg install gdbserver'''
  
#### gdb-cross debugger
+
= Work in Progress =
# While we're at it let's install the cross debugger
+
cd ~/oe
+
. beagleboard/beagleboard/profile.sh
+
bitbake gbd-cross
+
  
 +
[http://www.eclipse.org/ Eclipse] is an open source Integrated Development Environment that's enjoying broad use.
  
#### Install Remote System Tools
+
Here's how to run gdb on Beagle via Eclipse
Go to Help:Install New Software...
+
Click the down arrow to the right of "type or select a site" and
+
Select: Galileo - http://download.eclipse.org/releases/galileo
+
Expand: Programming Languages
+
Eclipse C/C++ Development should already be installed, if not, check it.
+
Expand: Modile and Device Development
+
Eclipse C/C++ DSF gdb Debugger should already be installed, if not, check it.
+
Check: Eclipse C/C++ Remote Launch
+
Check: Remote System Explorer End-User Runtime
+
Check: Remote System Explorer User Actions
+
Click: Next >
+
Click: Finish
+
Click "Yes" to restart eclipse
+
Click: "Yes" to use same workspace
+
  
#### Finding the Beagle's IP address
+
== Installing on Host ==
#On the BeagleBoard run ifconfig eth0.  Note the IP address
+
#On the host edit /etc/hosts and add:
+
137.112.41.76 Beagle
+
#(Use your IP address)
+
#Exit the editor and try:
+
ping Beagle
+
# If you don't get an answer something is messed up.
+
# On the host connect to the Beagle and create a workspace
+
ssh Beagle
+
mkdir workspace/HelloWorld/Debug
+
  
Now back to the host
+
Install Eclipse and the gdb tools
 +
<pre>
 +
$ cd ~/oe
 +
$ sudo  apt-get install eclipse
 +
$ source source-me.txt
 +
$ bitbake gbd-cross
 +
</pre>
  
#### Setting up for remote debugging
+
== Install Remote System Tools ==
Select: Project:Properties
+
Expand: C/C++ Build
+
Select: Settings
+
Tab: Tool Settings
+
Select: GCC C Compiler
+
Replace "gcc" in "Command:" with "~/oe/tmp/cross/armv7a/bin/arm-angstrom-linux-gnueabi-gcc"
+
Click: Directories (below GCC C Compiler
+
Click Add... button and insert
+
~/oe/tmp/staging/armv7a-angstrom-linux-gnueabi/user/include
+
~/oe/
+
Click: GCC C Linker (below Directories)
+
Replace "gcc" in "Command:" with "~/oe/tmp/cross/armv7a/bin/arm-angstrom-linux-gnueabi-gcc"
+
Click: Libraries
+
Click: Add... to Library search path (-L)  (the bottom one) insert:
+
~/oe/tmp/staging/armv7a-angstrom-linux-gnueabi/lib
+
Click OK to close Properties for HelloWorld window
+
  
Hit Ctrl-B to build, or click the little hammer
+
* Start Eclipse (<code>$ eclipse &</code>)
 +
[[File:Eclipse_-_Workspace_Launcher.png|300px]]
 +
* Click: OK
 +
[[File:Eclipse - Welcome.png|300px]]
 +
* Go to Help:Install New Software...
 +
[[File:Eclipse_-_Install_New_Software.png|300px]]
 +
* Enter: http://download.eclipse.org/releases/galileo in "type or select a site"
 +
* Click: Add
 +
[[File:Eclipse_-_Add_Site.png|300px]]
 +
* Enter: Galileo in the Name field
 +
* Click: OK and wait while it fetches from the site.
 +
* Expand: Mobile and Device Development
 +
[[File:Eclipse - Mobile Devices.png|300px]]
 +
* Check: Eclipse C/C++ DSF gdb Debugger
 +
* Check: Eclipse C/C++ Remote Launch
 +
* Check: Remote System Explorer End-User Runtime
 +
* Check: Remote System Explorer User Actions
 +
* Expand: Programming Languages
 +
* Check: Eclipse C/C++ Development Tools
 +
* Click: Next >
 +
* Verify the list and Click Next >
 +
[[File:Eclipse - Install Details.png|300px]]
 +
* Accept the license and Click: Finish
 +
* Click: "Yes" to restart Eclipse
 +
* Click: "Yes" to use same workspace
  
Menu: Run:Debug Configurations...
+
== Finding the Beagle's IP address ==
Double-Click C/C++ Remote Applcation to create a new configuration
+
Name it BeagleBoard
+
Project: Click Browse and select HelloWorld
+
C/C++ Application:  Click Search Project and select HelloWorld
+
Remote Absolute File Path...  Click: Browse...
+
Connection:  Click New...
+
Select: SSH Only and Click Next >
+
Host name: Beagle
+
Click: Finish
+
"Select Remote C/C++" will appear.  Connection:  Beagle
+
Expand: My Home, workspace, HelloWorld, Debug
+
Click: OK
+
In the Properties window select Connection: Beagle
+
Click: Apply
+
Tab: Debugger
+
GDB debugger:  Click: Browse and look for
+
~/oe/tmp/cross/armv7a/bin/arm-angstrom-linux/gnueabi-g
+
In Debugger Options Tab:  Shared Libraries
+
Add...  ~/oe/tmp/staging/armv7a-angstgrom-linux-gnueabi/lib
+
  
Click: Debug (bottom right)
+
* On the BeagleBoard run
It should compile your file (if needed), copy it to the Beagle and start gdb on it. It will run up to main() and wait for your input. Try the single step button (F6 step over, F5 step into)
+
<pre>
 +
$ ifconfig eth0
 +
</pre>
 +
Note the IP address
 +
* On the host edit <code>/etc/hosts</code> and add:
 +
  137.112.41.76 Beagle (Use your IP address)
 +
* Exit the editor and try:
 +
<pre>
 +
$ ping Beagle
 +
</pre>
 +
If you don't get an answer something is messed up. Get help.
 +
On the host connect to the Beagle and create a workspace
 +
<pre>
 +
$ ssh Beagle
 +
$ mkdir -p workspace/HelloWorld/Debug
 +
</pre>
  
Be sure to hit Terminal (Ctrl-F2) when done.
+
== Creating a New Project and Setting up for Remote Debugging ==
  
Add a for loop and watch the index variable change!
+
Now back to the Eclipse
  
 +
* Click:        '''File:New:C Project'''
 +
[[File:Eclipse - New C Project.png|300px]]
 +
* Name the project '''HelloWorld'''
 +
[[File:Eclipse - C Project.png|300px]]
 +
* Click: Finish
 +
* Click: Project:Properties
 +
[[File:Eclipse - Project Properties.png|300px]]
 +
* Expand: C/C++ Build
 +
* Select: Settings
 +
* Tab: Tool Settings
 +
* Select: GCC C Compiler
 +
* Replace "gcc" in "Command:" with "~/oe/angstrom-dev/cross/armv7a/bin/arm-angstrom-linux-gnueabi-gcc"
 +
[[File:Eclipse - gcc.png|300px]]
 +
* Click: Directories (below GCC C Compiler
 +
* Click [[File:Eclipse - Add.png]] (Add...) button and insert "/home/''yoder''/oe/angstrom-dev/staging/armv7a-angstrom-linux-gnueabi/user/include"  (Replace ''yoder'' with your path name.)
 +
* Click: GCC C Linker (below Directories)
 +
* Replace "gcc" in "Command:" with "~/oe/angstrom-dev/cross/armv7a/bin/arm-angstrom-linux-gnueabi-gcc"
 +
* Click: Libraries
 +
* Click: Add... to Library search path (-L)  (the bottom one) insert "~/oe/angstrom-dev/staging/armv7a-angstrom-linux-gnueabi/lib"
 +
* Click OK to close Properties for HelloWorld window
  
##### Other
+
== Creating and Compiling a New C File ==
This is taken from:  http://www.ibm.com/developerworks/opensource/library/os-eclipse-stlcdt/index.html
+
  
You might be able to do this via apt-get install.  I used the add/remove program app in Red Hat and selected Fedora Eclipse. It appears to load lots of things.
+
* Copy the '''HelloWorld''' file that we have been using into ~/workspace/HellowWorld.
This load version 3.4.1
+
* Click File:Refresh. You file should appear in the project.
 +
[[File:Eclipse - Refresh.png|300px]]
 +
[[File:Eclipse - HelloBeagle.png|300px]]
 +
* Hit Ctrl-B to build, or click the little hammer [[File:Eclipse_-_Build_Button.png]].
  
In Ubuntu go to Applications: Add/Remove
+
== Running Your Program ==
Select Show:  All available applications
+
Search: eclipse
+
Check: Eclipse
+
Click: Apply Changes
+
Wait for some 113 files to download (15 minutes on a fast connection)
+
With this install you need to load a few more things.  Go to
+
Help:Software Updates:Find and Install...
+
Select:  Search for new features to install
+
Select:  Callisto Discovery Site
+
Click: Finish  (wait a moment)
+
Select a site near you (wait a moment)
+
Expand:  Callisto Discovery Site
+
Select:  C and C++ Development
+
Next, Accept, Next, Finish (wait)
+
  
This loads version 3.2.2
+
* Menu: Run:Debug Configurations...
 +
[[File:Eclipse - Debug Config.png|300px]]
 +
* Double-Click C/C++ Remote Applcation to create a new configuration
 +
* Name it BeagleBoard
 +
* Project: Click Browse and select HelloWorld
 +
* C/C++ Application:  Click Search Project and select HelloWorld
 +
* Remote Absolute File Path...  Click: Browse...
 +
* Connection:  Click New...
 +
[[File:Eclipse - Select Remote.png|300px]]
 +
* Select: SSH Only and Click Next >
 +
* Host name: Beagle
 +
* Click: Finish
 +
* "Select Remote C/C++" will appear.  Connection:  Beagle
 +
[[File:Eclipse - Select Remote 001.png|300px]]
 +
* Expand: My Home, workspace, HelloWorld, Debug
 +
[[File:Eclipse - Select Remote 002.png|300px]]
 +
* Click: OK
 +
* In the Properties window select Connection: Beagle
 +
* Click: Apply
 +
* Tab: Debugger
 +
* GDB debugger:  Click: Browse and look for "~/oe/tmp/cross/armv7a/bin/arm-angstrom-linux/gnueabi-gdb"
 +
[[File:Eclipse - Debugger.png|300px]]
 +
* In Debugger Options Tab:  Shared Libraries
 +
* Add...  "~/oe/angstrom-dev/staging/armv7a-angstgrom-linux-gnueabi/lib"
 +
* Click: Debug (bottom right)
 +
[[File:Eclipse - Debug.png|300px]]
  
 +
It should compile your file (if needed), copy it to the Beagle and start gdb on it.  However I haven't been able to make it work. 
  
#### Install the c/c++ stuff
+
'''Fix:''' The first time you try to select the Remote Absolute File Path for C/C++ Application you haven't uploaded the binary file to the Beagle. Hence you cannot select it via the dialogue. Once you clicked the "Debug" button you can re-open the dialogue and select the binary or you can manually complete the line to "/home/MyUsername/workspace/HelloWorld/Debug/HelloWorld".
Select:  Help:Software Updates
+
Tab:  Available Software
+
Expand:  Ganymede Update Site
+
Check:  C and C++ Development
+
Click:  Install
+
Expand: Remote Access and Device Developement
+
Check: Remote System Explorer C/C++ Remote Debugger Launcher
+
Check: Remote System Explorer End-User Runtime
+
Click: Install
+
Click: Next
+
Click: I accept...
+
Click: Finish
+
  
##### Fedora #####
+
Back when I had this working, it will run up to <code>main()</code> and wait for your inputTry the single step button (F6 step over, F5 step into)
I did see the Canymede Update Site on Fedora, so I
+
Select: Help:Software Updates
+
Tab: Available Software
+
Click: Add Site
+
Location: http://download.eclipse.org/releases/ganymede
+
Click: OK
+
The Available Software list should update nad "Ganymede Update Site" should appearThe follow the instructions above.
+
  
#####        #####
+
Be sure to hit Terminate (Ctrl-F2) when done.
  
Start Eclipse
+
Add a for loop and watch the index variable change!
Select: File:New:Project...
+
Expand: C
+
Select: C Project
+
Click: Next
+
Project Name:  HelloWorld (no spaces)
+
Select: Hello World ANSI C Project
+
Click: Next
+
Fill in to suit, Click:  Next
+
Click: Finish
+
Tab: C/C++ Projects
+
Expand: HelloWorld
+
Expand: src
+
Expand: HelloWorld.c
+
Double-Click: main(void)  The file will open in a window
+
 
+
This will create an executable that runs on the Ubuntu Linux (guest) platform.
+
 
+
##### Beagle Execution
+
Here's how to run it remotely on the Beagle.  This is from:
+
http://www.nabble.com/Solution:-Using-Eclipse-CDT-for-Gusmtix-development-td18251552.html
+
Here's what I did differently:
+
4) Project Properties/Settings
+
* On "GCC C++ Compiler" change "Command" to
+
"~/gumstix/gumstix-oe/tmp/cross/bin/arm-angstrom-linux-gnueabi-g++"
+
(dbg_03.png)
+
* On "GCC C++ Compiler/Directories" add
+
"~/gumstix/gumstix-oe/tmp/staging/arm-angstrom-linux-gnueabi/include" to
+
"Includes paths (-I)"
+
 
+
I used: tmp/staging/arm-angstrom-linux-gnueabi/usr/include
+
 
+
* On "GCC C++ Compiler/Miscellaneous" add "-c -march=armv5te
+
-mtune=xscale -Wa,-mcpu=xscale" to "Other flags"
+
 
+
I didn't change this since the gcc should have all this set.
+
 
+
5) On "Run/Debug Configurations" add "C++ Remote Application"
+
* On "Main" tab
+
 
+
This is in Run:Debug Configurations
+
 
+
 
+
In eclipse,
+
Select: Window:Open Perspective:C/C++
+
Click on the HelloWorld project to select it
+
Select: Project:Properties
+
Expand: C/C++ Build
+
Select: Discovery Options
+
 
+
 
+
 
+
Starting point:
+
http://www.nabble.com/Solution:-Using-Eclipse-CDT-for-Gusmtix-development-td18251552.html
+
 
+
On the Beagle:
+
opkg install openssh openssh-sftp openssh-server
+
opkg install gdbserver
+
 
+
In Eclipse
+
File:New Project
+
Select General:Project
+
I used project name "Remove gdb"
+

Latest revision as of 13:51, 10 September 2012

See EBC_Exercise_14_gdb_Debugging#Eclipse.2C_gdb_and_remote_debuging for remote debugging via Eclispe.

This was a work in progress that was never finished.

This may be a better starting place.

YouTube Video

Here is a video that says it will show how to use Eclipse for remote debugging.

Here is where you get the RSE-runtime.

host$ sudo apt-get update
host$ sudo apt-get install eclipse
host$ sudo apt-get install gcc-arm-linux-gnueabi
host$ sudo apt-get install g++-arm-linux-gnueabi
host$ sudo apt-get install gdb
host$ sudo apt-get install gdb-multiarch
beagle$ opkg update
beagle$ opkg install gdbserver

Work in Progress

Eclipse is an open source Integrated Development Environment that's enjoying broad use.

Here's how to run gdb on Beagle via Eclipse

Installing on Host

Install Eclipse and the gdb tools

$ cd ~/oe
$ sudo  apt-get install eclipse 
$ source source-me.txt
$ bitbake gbd-cross

Install Remote System Tools

  • Start Eclipse ($ eclipse &)

Eclipse - Workspace Launcher.png

  • Click: OK

Eclipse - Welcome.png

  • Go to Help:Install New Software...

Eclipse - Install New Software.png

Eclipse - Add Site.png

  • Enter: Galileo in the Name field
  • Click: OK and wait while it fetches from the site.
  • Expand: Mobile and Device Development

Eclipse - Mobile Devices.png

  • Check: Eclipse C/C++ DSF gdb Debugger
  • Check: Eclipse C/C++ Remote Launch
  • Check: Remote System Explorer End-User Runtime
  • Check: Remote System Explorer User Actions
  • Expand: Programming Languages
  • Check: Eclipse C/C++ Development Tools
  • Click: Next >
  • Verify the list and Click Next >

Eclipse - Install Details.png

  • Accept the license and Click: Finish
  • Click: "Yes" to restart Eclipse
  • Click: "Yes" to use same workspace

Finding the Beagle's IP address

  • On the BeagleBoard run
$ ifconfig eth0

Note the IP address

  • On the host edit /etc/hosts and add:
137.112.41.76	Beagle (Use your IP address)
  • Exit the editor and try:
$ ping Beagle

If you don't get an answer something is messed up. Get help. On the host connect to the Beagle and create a workspace

$ ssh Beagle
$ mkdir -p workspace/HelloWorld/Debug

Creating a New Project and Setting up for Remote Debugging

Now back to the Eclipse

  • Click: File:New:C Project

Eclipse - New C Project.png

  • Name the project HelloWorld

Eclipse - C Project.png

  • Click: Finish
  • Click: Project:Properties

Eclipse - Project Properties.png

  • Expand: C/C++ Build
  • Select: Settings
  • Tab: Tool Settings
  • Select: GCC C Compiler
  • Replace "gcc" in "Command:" with "~/oe/angstrom-dev/cross/armv7a/bin/arm-angstrom-linux-gnueabi-gcc"

Eclipse - gcc.png

  • Click: Directories (below GCC C Compiler
  • Click Eclipse - Add.png (Add...) button and insert "/home/yoder/oe/angstrom-dev/staging/armv7a-angstrom-linux-gnueabi/user/include" (Replace yoder with your path name.)
  • Click: GCC C Linker (below Directories)
  • Replace "gcc" in "Command:" with "~/oe/angstrom-dev/cross/armv7a/bin/arm-angstrom-linux-gnueabi-gcc"
  • Click: Libraries
  • Click: Add... to Library search path (-L) (the bottom one) insert "~/oe/angstrom-dev/staging/armv7a-angstrom-linux-gnueabi/lib"
  • Click OK to close Properties for HelloWorld window

Creating and Compiling a New C File

  • Copy the HelloWorld file that we have been using into ~/workspace/HellowWorld.
  • Click File:Refresh. You file should appear in the project.

Eclipse - Refresh.png Eclipse - HelloBeagle.png

  • Hit Ctrl-B to build, or click the little hammer Eclipse - Build Button.png.

Running Your Program

  • Menu: Run:Debug Configurations...

Eclipse - Debug Config.png

  • Double-Click C/C++ Remote Applcation to create a new configuration
  • Name it BeagleBoard
  • Project: Click Browse and select HelloWorld
  • C/C++ Application: Click Search Project and select HelloWorld
  • Remote Absolute File Path... Click: Browse...
  • Connection: Click New...

Eclipse - Select Remote.png

  • Select: SSH Only and Click Next >
  • Host name: Beagle
  • Click: Finish
  • "Select Remote C/C++" will appear. Connection: Beagle

Eclipse - Select Remote 001.png

  • Expand: My Home, workspace, HelloWorld, Debug

Eclipse - Select Remote 002.png

  • Click: OK
  • In the Properties window select Connection: Beagle
  • Click: Apply
  • Tab: Debugger
  • GDB debugger: Click: Browse and look for "~/oe/tmp/cross/armv7a/bin/arm-angstrom-linux/gnueabi-gdb"

Eclipse - Debugger.png

  • In Debugger Options Tab: Shared Libraries
  • Add... "~/oe/angstrom-dev/staging/armv7a-angstgrom-linux-gnueabi/lib"
  • Click: Debug (bottom right)

Eclipse - Debug.png

It should compile your file (if needed), copy it to the Beagle and start gdb on it. However I haven't been able to make it work.

Fix: The first time you try to select the Remote Absolute File Path for C/C++ Application you haven't uploaded the binary file to the Beagle. Hence you cannot select it via the dialogue. Once you clicked the "Debug" button you can re-open the dialogue and select the binary or you can manually complete the line to "/home/MyUsername/workspace/HelloWorld/Debug/HelloWorld".

Back when I had this working, it will run up to main() and wait for your input. Try the single step button (F6 step over, F5 step into)

Be sure to hit Terminate (Ctrl-F2) when done.

Add a for loop and watch the index variable change!