ECE497 Project: Multiple Partitions via U-boot
The goal of this project is to give the U-boot boot-loader the ability to mount different partitions on start-up. This would allow the user to dual-boot the beagle board by controlling the boot sequence with a user button or RS-232 link.
There are two principal parts to this project: finding a method to create a multiboot mmc card, and creating a command in U-Boot to simplify the process of booting multiple partitions for the user. We have successfully completed both parts in this project and have found a method create and boot from a multi-partition mmc card on the Beagle Board.
If we had more time, we would like to research further into booting from USB devices. Initially, our projects scope included booting from external USB devices, but we were not able to make any progress with this goal.
We feel that this project was successful in that we achieved the primary goals we set out to accomplish. In addition, we learned many new things about the inner workings of boot-loaders, solid state storage devices, and the way the kernel boots during startup.
These instructions will guide you through the installation of our modified U-boot boot-loader.
If you do not yet have git installed see the instruction on EBC Exercise 07.
Open a terminal on your host machine and pull our git repository:
host$ git clone firstname.lastname@example.org:albertlee5/project.git host$ cd project/
To compile the code for our project you will have to source two shell scripts that set certain environmental variables and the cross-compiler toolchain:
host$ source ~/.oe/environment-oecore host$ source ~/.oe/crossCompileEnv.sh
Before you can build our installation, you will need to configure some variables so that the make file knows exactly what platform U-boot will use. First you need to unconfigure any previous settings and then have make configure itself for the Beagle Board.
host$ make unconfig host$ make omap3_beagle_config
Now you should be able to make our project:
Next copy the resulting MLO, uboot.img, and uboot.bin to the boot partition of your mmc-card and rename the corresponding existing files so they don't interfere at startup. The beagle should now boot with our modified bootloader.
Note: follow the instructions in the section below if you ran into some problems during make. The errors described are caused by a problem in the files we pushed to the repository. Although we believe we fixed the problem, we only have two machines with which to test this, so we included the remedy below as a precaution.
If make fails with an error such as "System not Configured" or the like, there are several commands you will have to run to fix this. This is caused because the copy on the repository may contain some temporary files that were native to the editors host machine, but will not work with your configuration. We will have to remove several files so that make will re-generate them for your machine. In the terminal type:
host:/project$ rm -rf include/autoconf.mk host:/project$ rm -rf include/autoconf.mk.dep
This removes some auto-configuration files from the include directory. We will also need to remove a number of .depend files created by make. (Note that simply typing make clean will not remove these since they were not created with your Makefile). The following commands perform a batch remove of these files, and then check to see if the removal was successful:
host:/project$ find . -name .depend | xargs rm -rf host:/project$ find . -name .depend.* | xargs rm -rf host:/project$ find . -name .depend host:/project$ find . -name .depend.*
The last two commands should return no output. Now try using make to compile U-boot.
The Multi-Partition Creator Script
Before you can dual-boot your Beagle Board, you will need an mmc card with multiple partitions. Surprisingly, a Google search reveals that there are few, if any people who have accomplished this. (Please note that the SuperJumbo package for the Beagle Board by Always Innovating uses a different method to switch between OS's while the board is powered on). To remedy this issue, we have created a script that will set up an mmc card with U-boot and multiple Angstrom partitions. We based our script on the OMAP3 SD Booting script created by Slim Logic Ltd. which can be found at the following url: http://www.slimlogic.co.uk/2011/05/omap3-sd-booting/. If you would like to see the modifications we made to achieve multi-boot, please view the 'Theory of Operation' section below.
First, download our script here.
Before you can run the script, you will have to change the permissions so that it will be executable:
host$ sudo chmod 777 parititioning.sh
Now run the script with no arguments. You should receive the below output message:
host$ sudo ./partitioning.sh Usage: partitioning.sh <drive>
Now plug the mmc card into your host machine and determine which name the host computer assigns to it.
host$ dmesg | tail
There should be a few lines talking about mounting a disk and giving it the name sdx where x is any letter for the drive. Now that we know the name of the disk, we can run our script:
host$ sudo ./partitioning.sh /dev/sdx
Your drive now has four partitions on it, three of which can serve as a root file system for linux. The first partition is FAT32 and will serve as the boot sector where U-boot lives. Now, copy your MLO, u-boot.bin, u-boot.img, and uimage to the boot sector of your mmc card. Also, obtain a copy of the root file system for Angstrom. Due to the the size limitations of uploads, we cannot provide this, but if you follow the instruction [ here] to build a normal Angstrom MMC card and then sudo copy all the files in Narcissus-rootfs to your computer, you will have a bootable root file system.
Now put the sd card in your beagle board and fire it up. Be sure to plug a cable from the serial port on the beagle board to some kind of connection on the computer. Instructions to do this can be found [ here].
Once byobu is opened, and you have U-boot running, enter the following commands:
Our project gives the Beagle Board the ability dual boot from and sd card. The project combines a script for setting up an sd card with multiple partitions with a user-friendly method of multi-booting with U-boot. After many hours of online research, we believe that our project is the first documented project of its kind for the Beagle Board. Although our system currently only works with the Angstrom distribution of Linux, it lays the groundwork for dual-booting multiple OS's such as Ubuntu and Android.
Theory of Operation
This section will describe how we accomplished our project and detail some of the challenges we faced while we worked.
Initially, we wanted to prove that we could multi-boot in U-boot just from the command line as a proof of concept. After creating a multi-partition sd card (see above section), we discovered a method of booting to separate partitions. This involves starting U-boot, and first, listing all the available partitions on the detected mmc device. Next, we had to determine which partitions were bootable and then pass that partition to the ext2load command. Analysis of the ext2load command showed us that this command calls the bootm command, which intern calls the boot command. Each of these commands generates a set of parameters for the next one down the chain allowing the user to go from a high level of abstraction to a very low level of operations. We played with the booting commands and environmental variables and determined the best way to select a boot partition was to follow the following commands:
U-boot # mmc part
|Create Project Page||Jan 23, 2012||Yuhas|
|Research loading multiple partitions / u-boot scripting language||Feb 6, 2012||Yuhas & Ma|
|Determine schedule for project||Feb 6, 2012||Yuhas & Ma|
|Create SD card with multiple root partitions||Feb 7, 2012||Yuhas & Ma|
|Test U-boot to multiboot using command-line||Feb 7, 2012||Ma|
Not yet available.