Difference between revisions of "ECE497 Project Ideas"

From eLinux.org
Jump to: navigation, search
(Projects you would like to do)
(Projects you would like to do)
Line 39: Line 39:
 
| The [http://slingbox.com/ Slingbox] is a device that allows "place-shifting" of television through streaming.  The idea is to create a similar device using the Beagle and a USB DTV tuner.  It could implement a [[UPnP]] server and perform on-the-fly transcoding using [http://gstreamer.org/ GStreamer] (with [http://www.freedesktop.org/wiki/GstOpenMAX DSP] [[BeagleBoard/gst-openmax|acceleration]]).  Hopefully [[UPnP#NAT_Traversal|UPnP NAT traversal]] could be used to automatically open a port for external access as well, enabling "place-shifting".
 
| The [http://slingbox.com/ Slingbox] is a device that allows "place-shifting" of television through streaming.  The idea is to create a similar device using the Beagle and a USB DTV tuner.  It could implement a [[UPnP]] server and perform on-the-fly transcoding using [http://gstreamer.org/ GStreamer] (with [http://www.freedesktop.org/wiki/GstOpenMAX DSP] [[BeagleBoard/gst-openmax|acceleration]]).  Hopefully [[UPnP#NAT_Traversal|UPnP NAT traversal]] could be used to automatically open a port for external access as well, enabling "place-shifting".
 
|-
 
|-
| Cody Collins
+
| [[user:collinjc | J. Cody Collins]]
 
| BeagleBoard-Based Router
 
| BeagleBoard-Based Router
 
| This idea would involve writing software to perform the capabilities found in commercially available routers. The software could be written from scratch, or an existing project, such as [http://openwrt.org/ OpenWrt] could be ported to the BeagleBoard. Currently, some efforts are being made in porting OpenWrt to the BeagleBoard, but the number of contributers has been relatively small. These efforts could potentially result in a low-cost, open-source, OMAP3-based router.
 
| This idea would involve writing software to perform the capabilities found in commercially available routers. The software could be written from scratch, or an existing project, such as [http://openwrt.org/ OpenWrt] could be ported to the BeagleBoard. Currently, some efforts are being made in porting OpenWrt to the BeagleBoard, but the number of contributers has been relatively small. These efforts could potentially result in a low-cost, open-source, OMAP3-based router.

Revision as of 06:16, 11 March 2010


Sources for Project Ideas

Here are some links where you'll find ideas for your project.

Projects you would like to do

Edit this page to add projects you would like to do. If you aren't in the class, add ideas you would like to see done by class members.

Proposer's Name Project Title Description
Mark A. Yoder Sample Project Describe what your project idea is. What software does it build on (if any). Is there hardware design involved. What software background is needed.
Mark A. Yoder Google PowerMeter Google has a project to view and manage home electricity usage. This project would involve designing the hardware to measure the power usage and the Beagle software in interface with it. The Beagle would talk to the local home network via a wireless link and the home owner would configure the Beagle via a web page served on the Beagle.
Yannick Polius Audio MBox This project is mostly software, with the hardware element being the use of the dsp. The idea is to tie together three technologies: speech recognition, speech synthesis, and internet access in order to create an interface capable of orating information to the user based on a vocal command. The implementation I have in mind is to use the Pocket Sphinx speech recognition engine to first understand what the user wants through speech, such as "Rose-Hulman". Once the speech is translated, the software can execute a Wikipedia search to pull said item's page. Most of the important info is contained within the introductory paragraph, so the software will take only that chunk and feed it into the Flite speech synthesis engine. The end result is a simple machine with "mother box" like usability, that is, no interaction besides what is natural to the user (speaking) should be necessary to retrieve the information.
David Baty IRLP Node IRLP (Internet Radio Linking Project) is an amateur radio project to allow the linking of repeaters across the world over the internet. It requires very little hardware, but due to an antiquated interface board and is typically run on old desktop hardware that uses significantly more power than a beagle board. All of the software already runs on Linux, but would require some porting. Interface hardware would also have to be designed, but if DTMF (dial tone) decoding is done in software, this external board would be very simple.
Tom Most Open Source Slingbox The Slingbox is a device that allows "place-shifting" of television through streaming. The idea is to create a similar device using the Beagle and a USB DTV tuner. It could implement a UPnP server and perform on-the-fly transcoding using GStreamer (with DSP acceleration). Hopefully UPnP NAT traversal could be used to automatically open a port for external access as well, enabling "place-shifting".
J. Cody Collins BeagleBoard-Based Router This idea would involve writing software to perform the capabilities found in commercially available routers. The software could be written from scratch, or an existing project, such as OpenWrt could be ported to the BeagleBoard. Currently, some efforts are being made in porting OpenWrt to the BeagleBoard, but the number of contributers has been relatively small. These efforts could potentially result in a low-cost, open-source, OMAP3-based router.
Brian Embry
Jessica Lipscomb
Paul Banister
MythTV/DSP Pico Projector Have the Beagleboard act as a MythTV/portable video playback node. This may require work with the DSP acceleration of FFMPEG/Gstreamer. Additionally, interfacing with a Pico Projector to allow for portable media enjoyment. If MythTV support is not practical, simple localized video playback with DSP acceleration will be used.