ECE597 Listings for Chapter 5 xink

From eLinux.org
Revision as of 18:45, 1 April 2010 by Xinkeqiong (talk | contribs) (Created page with 'Category:ECE597 {| ! Number ! Page ! Caption ! Listing |- | 5-1 | 5-2 | Final Kernel Build Sequence: ARM/BeagleBoard | <pre> $ export OETREE="${HOME}/oe" $ PATH=${OETREE}/a…')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


Number Page Caption Listing
5-1 5-2 Final Kernel Build Sequence: ARM/BeagleBoard
$ export OETREE="${HOME}/oe"
$ PATH=${OETREE}/angstrom-dev/staging/i686-linux/usr/bin/:${PATH}
$ PATH=${OETREE}/angstrom-dev/cross/armv7a/bin/:${PATH}
$ make CROSS_COMPILE=arm-angstrom-linux-gnueabi- uImage
... < many build steps omitted for clarity >
    CC      lib/vsprintf.o
  AR      lib/lib.a
  LD      vmlinux.o
  MODPOST vmlinux.o
  GEN     .version
  CHK     include/linux/compile.h
  UPD     include/linux/compile.h
  CC      init/version.o
  LD      init/built-in.o
  LD      .tmp_vmlinux1
  KSYM    .tmp_kallsyms1.S
  AS      .tmp_kallsyms1.o
  LD      .tmp_vmlinux2
  KSYM    .tmp_kallsyms2.S
  AS      .tmp_kallsyms2.o
  LD      vmlinux
  SYSMAP  System.map
  SYSMAP  .tmp_System.map
  OBJCOPY arch/arm/boot/Image
  Kernel: arch/arm/boot/Image is ready
  AS      arch/arm/boot/compressed/head.o
  GZIP    arch/arm/boot/compressed/piggy.gz
  AS      arch/arm/boot/compressed/piggy.o
  CC      arch/arm/boot/compressed/misc.o
  LD      arch/arm/boot/compressed/vmlinux
  OBJCOPY arch/arm/boot/zImage
  Kernel: arch/arm/boot/zImage is ready
  UIMAGE  arch/arm/boot/uImage
Image Name:   Linux-2.6.29-omap1
Created:      Fri Apr  2 00:19:32 2010
Image Type:   ARM Linux Kernel Image (uncompressed)
Data Size:    2991200 Bytes = 2921.09 kB = 2.85 MB
Load Address: 80008000
Entry Point:  80008000
  Image arch/arm/boot/uImage is ready
5-2 5-5 Assembly File .../arch/arm/boot/compressed/piggy.S
        .section .piggydata,#alloc
        .globl  input_data
input_data:
        .incbin "arch/arm/boot/compressed/piggy.gz"
        .globl  input_data_end
input_data_end:
5-3 5-7 Final Kernel Build Sequence: ARM/BeagleBoard
reading uImage                                                                                                       
                                                                                                                     
2996196 bytes read                                                                                                   
## Booting kernel from Legacy Image at 80300000 ...                                                                  
   Image Name:   Angstrom/2.6.29/beagleboard                                                                         
   Image Type:   ARM Linux Kernel Image (uncompressed)                                                               
   Data Size:    2996132 Bytes =  2.9 MB                                                                             
   Load Address: 80008000                                                                                            
   Entry Point:  80008000                                                                                            
   Verifying Checksum ... OK                                                                                         
   Loading Kernel Image ... OK                                                                                       
OK                                                                                                                   
                                                                                                                     
Starting kernel ...                                                                                                  
                                                                                                                     
Uncompressing Linux..................................................................................................
[    0.000000] Linux version 2.6.29-omap1 (koen@dominion) (gcc version 4.3.3 (GCC) ) #1 PREEMPT Wed Oct 21 13:11:52 9
[    0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c5387f                                       
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache                                  
[    0.000000] Machine: OMAP3 Beagle Board                                                                           
[    0.000000] Memory policy: ECC disabled, Data cache writeback                                                     
[    0.000000] OMAP3430 ES3.1                                                                                        
[    0.000000] SRAM: Mapped pa 0x40200000 to va 0xd7000000 size: 0x100000                                            
[    0.000000] Reserving 14680064 bytes SDRAM for VRAM                                                               
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024                            
[    0.000000] Kernel command line: console=ttyS2,115200n8 console=tty0 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootw0
[    0.000000] Clocking rate (Crystal/DPLL/ARM core): 26.0/332/720 MHz                                               
[    0.000000] GPMC revision 5.0                                                                                     
[    0.000000] IRQ: Found an INTC at 0xd8200000 (revision 4.0) with 96 interrupts                                    
[    0.000000] Total of 96 interrupts on 1 active controller                                                         
[    0.000000] OMAP34xx GPIO hardware version 2.5                                                                    
[    0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)                                                  
[    0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz                                                         
[    0.000000] Console: colour dummy device 80x30                                                                    
[    0.000000] console [tty0] enabled                                                                                
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)                                       
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)                                         
[    0.000000] Memory: 128MB 128MB = 256MB total                                                                     
[    0.000000] Memory: 238848KB available (5632K code, 576K data, 204K init)                                         
[    0.000000] Calibrating delay loop... 750.98 BogoMIPS (lpj=2932736)                                               
[    0.000000] Mount-cache hash table entries: 512                                                                   
[    0.000000] CPU: Testing write buffer coherency: ok                                                               
[    0.000000] net_namespace: 1036 bytes                                                                             
[    0.000000] regulator: core version 0.5                                                                           
[    0.000000] NET: Registered protocol family 16                                                                    
[    0.000000] GPIO-156 autorequested                                                                                
[    0.000000] GPIO-159 autorequested                                                                                
[    0.000000] Found NAND on CS0                                                                                     
[    0.000000] Registering NAND on CS0                                                                               
[   17.966888] OMAP DMA hardware revision 4.0                                                                        
[   18.000305] bio: create slab <bio-0> at 0                                                                         
[   18.061981] OMAP DSS rev 2.0                                                                                      
[   18.062103] OMAP DISPC rev 3.0                                                                                    
[   18.062133] OMAP VENC rev 2                                                                                       
[   18.062255] OMAP DSI rev 1.0                                                                                      
[   18.078216] i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz                                                        
[   18.081542] twl4030: PIH (irq 7) chaining IRQs 368..375                                                           
[   18.081604] twl4030: power (irq 373) chaining IRQs 376..383                                                       
[   18.082092] twl4030: gpio (irq 368) chaining IRQs 384..401                                                        
[   18.084442] regulator: VMMC1: 1850 <--> 3150 mV normal standby                                                    
[   18.085235] regulator: VDAC: 1800 mV normal standby                                                               
[   18.085968] regulator: VUSB1V5: 1500 <--> 0 mV normal standby                                                     
[   18.086822] regulator: VUSB1V8: 1800 <--> 0 mV normal standby                                                     
[   18.087585] regulator: VUSB3V1: 3100 <--> 0 mV normal standby                                                     
[   18.088287] regulator: VPLL2: 1800 mV normal standby                                                              
[   18.089050] regulator: VMMC2: 2800 <--> 3150 mV normal standby                                                    
[   18.089813] regulator: VSIM: 1800 <--> 3000 mV normal standby                                                     
[   18.089996] i2c_omap i2c_omap.2: bus 2 rev3.12 at 400 kHz                                                         
[   18.102722] i2c_omap i2c_omap.3: bus 3 rev3.12 at 100 kHz                                                         
[   18.104492] SCSI subsystem initialized                                                                            
[   18.107452] twl4030_usb twl4030_usb: Initialized TWL4030 USB module                                               
[   18.108764] usbcore: registered new interface driver usbfs                                                        
[   18.109252] usbcore: registered new interface driver hub                                                          
[   18.109619] usbcore: registered new device driver usb                                                             
[   18.112121] Bluetooth: Core ver 2.14                                                                              
[   18.112548] NET: Registered protocol family 31                                                                    
[   18.112579] Bluetooth: HCI device and connection manager initialized                                              
[   18.112640] Bluetooth: HCI socket layer initialized                                                               
[   18.113250] cfg80211: Using static regulatory domain info                                                         
[   18.113281] cfg80211: Regulatory domain: US                                                                       
[   18.113311]  (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)                                    
[   18.113342]  (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)                                         
[   18.113403]  (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)                                         
[   18.113433]  (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)                                         
[   18.113464]  (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)                                         
[   18.113494]  (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)                                         
[   18.113525]  (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)                                         
[   18.113586] cfg80211: Calling CRDA for country: US                                                                
[   18.116333] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0                                      
[   18.118591] musb_hdrc: USB OTG mode controller at d80ab000 using DMA, IRQ 92                                      
[   18.119873] NET: Registered protocol family 2                                                                     
[   18.120117] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)                                        
[   18.120635] TCP established hash table entries: 8192 (order: 4, 65536 bytes)                                      
[   18.120849] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)                                             
[   18.120971] TCP: Hash tables configured (established 8192 bind 8192)                                              
[   18.121002] TCP reno registered                                                                                   
[   18.121215] NET: Registered protocol family 1                                                                     
[   18.124542] VFS: Disk quotas dquot_6.5.2                                                                          
[   18.124664] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)                                            
[   18.125152] squashfs: version 4.0 (2009/01/31) Phillip Lougher                                                    
[   18.125762] JFFS2 version 2.2. (NAND) (SUMMARY)  �© 2001-2006 Red Hat, Inc.                                       
[   18.126495] msgmni has been set to 466                                                                            
[   18.130279] alg: No test for stdrng (krng)                                                                        
[   18.130401] io scheduler noop registered                                                                          
[   18.130432] io scheduler anticipatory registered                                                                  
[   18.130462] io scheduler deadline registered                                                                      
[   18.130645] io scheduler cfq registered (default)                                                                 
[   18.149841] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled                                               
[   18.172973] serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654                                        
[   18.194763] serial8250.0: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654                                        
[   18.217071] serial8250.0: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654                                        
[   18.217132] console [ttyS2] enabled                                                                               
[   18.747802] brd: module loaded                                                                                    
[   18.755737] loop: module loaded                                                                                   
[   18.759490] enc28j60 spi4.0: enc28j60 Ethernet driver 1.01 loaded                                                 
[   18.768646] enc28j60 spi4.0: enc28j60 chip not found                                                              
[   18.773681] enc28j60: probe of spi4.0 failed with error -5                                                        
[   18.779785] usbcore: registered new interface driver catc                                                         
[   18.785308] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver                                                   
[   18.791564] usbcore: registered new interface driver kaweth                                                       
[   18.797180] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver                                 
[   18.804992] usbcore: registered new interface driver pegasus                                                      
[   18.810760] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver                                        
[   18.817932] usbcore: registered new interface driver rtl8150                                                      
[   18.823883] usbcore: registered new interface driver asix                                                         
[   18.829559] usbcore: registered new interface driver cdc_ether                                                    
[   18.835723] usbcore: registered new interface driver dm9601                                                       
[   18.841613] usbcore: registered new interface driver smsc95xx                                                     
[   18.847686] usbcore: registered new interface driver gl620a                                                       
[   18.853515] usbcore: registered new interface driver net1080                                                      
[   18.859497] usbcore: registered new interface driver plusb                                                        
[   18.865295] usbcore: registered new interface driver rndis_host                                                   
[   18.871520] usbcore: registered new interface driver cdc_subset                                                   
[   18.877777] usbcore: registered new interface driver zaurus                                                       
[   18.883605] usbcore: registered new interface driver MOSCHIP usb-ethernet driver                                  
[   18.891357] Broadcom 43xx driver loaded [ Features: L, Firmware-ID: FW13 ]                                        
[   18.898681] usbcore: registered new interface driver zd1211rw                                                     
[   18.904754] usbcore: registered new interface driver rtl8187                                                      
[   18.910766] usbcore: registered new interface driver rndis_wlan                                                   
[   18.916992] usbcore: registered new interface driver zd1201                                                       
[   18.922882] usbcore: registered new interface driver usb8xxx                                                      
[   18.928894] usbcore: registered new interface driver rt2500usb                                                    
[   18.935058] usbcore: registered new interface driver rt73usb                                                      
[   18.941070] usbcore: registered new interface driver p54usb                                                       
[   18.946685] i2c /dev entries driver                                                                               
[   18.951751] Driver 'sd' needs updating - please use bus_type methods                                              
[   18.958465] Driver 'sr' needs updating - please use bus_type methods                                              
[   18.965759] omap2-nand driver initializing                                                                        
[   18.970184] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB 1,8V 16-bit)                    
[   18.979248] cmdlinepart partition parsing not available                                                           
[   18.984527] Creating 5 MTD partitions on "omap2-nand":                                                            
[   18.989746] 0x000000000000-0x000000080000 : "X-Loader"                                                            
[   18.996765] 0x000000080000-0x000000260000 : "U-Boot"                                                              
[   19.003692] 0x000000260000-0x000000280000 : "U-Boot Env"                                                          
[   19.010192] 0x000000280000-0x000000680000 : "Kernel"                                                              
[   19.018005] 0x000000680000-0x000010000000 : "File System"                                                         
[   19.135314] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver                                            
[   19.142211] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller                                                      
[   19.148773] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1                                  
[   19.156585] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800                                                      
[   19.173980] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00                                                     
[   19.180419] usb usb1: configuration #1 chosen from 1 choice                                                       
[   19.186462] hub 1-0:1.0: USB hub found                                                                            
[   19.190368] hub 1-0:1.0: 3 ports detected                                                                         
[   19.196166] Initializing USB Mass Storage driver...                                                               
[   19.201507] usbcore: registered new interface driver usb-storage                                                  
[   19.207611] USB Mass Storage support registered.                                                                  
[   19.212829] mice: PS/2 mouse device common for all mice                                                           
[   19.218688] input: gpio-keys as /devices/platform/gpio-keys/input/input0                                          
[   19.227600] input: twl4030_pwrbutton as /devices/platform/i2c_omap.1/i2c-adapter/i2c-1/1-0049/twl4030_pwrbutton/i1
[   19.519744] usb 1-2: new high speed USB device using ehci-omap and address 2                                      
[   19.683166] usb 1-2: configuration #1 chosen from 1 choice                                                        
[   19.689208] hub 1-2:1.0: USB hub found                                                                            
[   19.693237] hub 1-2:1.0: 4 ports detected                                                                         
[   19.986877] usb 1-2.2: new high speed USB device using ehci-omap and address 3                                    
[   20.126037] usb 1-2.2: configuration #1 chosen from 1 choice                                                      
[   20.236846] i2c_omap i2c_omap.2: controller timed out                                                             
[   20.242004] rtc-ds1307: probe of 2-0068 failed with error -5                                                      
[   20.249267] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec                                                  
[   20.255615] Bluetooth: HCI UART driver ver 2.2                                                                    
[   20.260162] Bluetooth: HCI H4 protocol initialized                                                                
[   20.264984] Bluetooth: HCI BCSP protocol initialized                                                              
[   20.270050] Bluetooth: HCILL protocol initialized                                                                 
[   20.274810] Bluetooth: Broadcom Blutonium firmware driver ver 1.2                                                 
[   20.281280] usbcore: registered new interface driver bcm203x                                                      
[   20.287048] Bluetooth: Digianswer Bluetooth USB driver ver 0.10                                                   
[   20.293273] usbcore: registered new interface driver bpa10x                                                       
[   20.298950] Bluetooth: BlueFRITZ! USB driver ver 1.2                                                              
[   20.304199] usbcore: registered new interface driver bfusb                                                        
[   20.309967] Bluetooth: Generic Bluetooth USB driver ver 0.4                                                       
[   20.316009] usbcore: registered new interface driver btusb                                                        
[   20.321563] Bluetooth: Generic Bluetooth SDIO driver ver 0.1                                                      
[   20.328247] mmci-omap-hs mmci-omap-hs.0: Failed to get debounce clock                                             
[   20.440093] mmci-omap-hs mmci-omap-hs.1: Failed to get debounce clock                                             
[   20.446685] regulator: Unable to get requested regulator: vmmc_aux                                                
[   20.455291] Registered led device: beagleboard::usr0                                                              
[   20.460571] Registered led device: beagleboard::usr1                                                              
[   20.471374] usbcore: registered new interface driver usbhid                                                       
[   20.477020] usbhid: v2.6:USB HID core driver                                                                      
[   20.482543] Advanced Linux Sound Architecture Driver Version 1.0.18a.                                             
[   20.489898] usbcore: registered new interface driver snd-usb-audio                                                
[   20.496551] No device for DAI twl4030                                                                             
[   20.500274] No device for DAI omap-mcbsp-dai-0                                                                    
[   20.504913] No device for DAI omap-mcbsp-dai-1                                                                    
[   20.509399] No device for DAI omap-mcbsp-dai-2                                                                    
[   20.513977] No device for DAI omap-mcbsp-dai-3                                                                    
[   20.518493] No device for DAI omap-mcbsp-dai-4                                                                    
[   20.522979] OMAP3 Beagle SoC init                                                                                 
[   20.526733] TWL4030 Audio Codec init                                                                              
[   20.531555] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok                                                         
[   20.545837] ALSA device list:                                                                                     
[   20.548858]   #0: omap3beagle (twl4030)                                                                           
[   20.553192] oprofile: using arm/armv7                                                                             
[   20.557220] TCP cubic registered                                                                                  
[   20.560485] NET: Registered protocol family 17                                                                    
[   20.565032] NET: Registered protocol family 15                                                                    
[   20.569580] Bluetooth: L2CAP ver 2.11                                                                             
[   20.573303] Bluetooth: L2CAP socket layer initialized                                                             
[   20.578430] Bluetooth: SCO (Voice Link) ver 0.6                                                                   
[   20.583038] Bluetooth: SCO socket layer initialized                                                               
[   20.593780] Bluetooth: RFCOMM socket layer initialized                                                            
[   20.599060] Bluetooth: RFCOMM TTY layer initialized                                                               
[   20.604095] Bluetooth: RFCOMM ver 1.10                                                                            
[   20.607879] Bluetooth: BNEP (Ethernet Emulation) ver 1.3                                                          
[   20.613281] Bluetooth: BNEP filters: protocol multicast                                                           
[   20.618560] Bluetooth: HIDP (Human Interface Emulation) ver 1.2                                                   
[   20.627746] RPC: Registered udp transport module.                                                                 
[   20.632507] RPC: Registered tcp transport module.                                                                 
[   20.637634] lib80211: common routines for IEEE802.11 drivers                                                      
[   20.643463] ThumbEE CPU extension supported.                                                                      
[   20.647766] Power Management for TI OMAP3.                                                                        
[   20.658599] Disabling unused clock "sr2_fck"                                                                      
[   20.662933] Disabling unused clock "sr1_fck"                                                                      
[   20.667266] Disabling unused clock "mcbsp_fck"                                                                    
[   20.671783] Disabling unused clock "mcbsp_fck"                                                                    
[   20.676300] Disabling unused clock "mcbsp_fck"                                                                    
[   20.680786] Disabling unused clock "mcbsp_ick"                                                                    
[   20.685302] Disabling unused clock "mcbsp_ick"                                                                    
[   20.689788] Disabling unused clock "mcbsp_ick"                                                                    
[   20.694274] Disabling unused clock "gpt2_ick"                                                                     
[   20.698730] Disabling unused clock "gpt3_ick"                                                                     
[   20.703125] Disabling unused clock "gpt4_ick"                                                                     
[   20.707550] Disabling unused clock "gpt5_ick"                                                                     
[   20.711944] Disabling unused clock "gpt6_ick"                                                                     
[   20.716369] Disabling unused clock "gpt7_ick"                                                                     
[   20.720794] Disabling unused clock "gpt8_ick"                                                                     
[   20.725189] Disabling unused clock "gpt9_ick"                                                                     
[   20.729827] Disabling unused clock "wdt3_ick"                                                                     
[   20.734222] Disabling unused clock "wdt3_fck"                                                                     
[   20.738647] Disabling unused clock "gpio2_dbck"                                                                   
[   20.743225] Disabling unused clock "gpio3_dbck"                                                                   
[   20.747802] Disabling unused clock "gpio4_dbck"                                                                   
[   20.752410] Disabling unused clock "gpio5_dbck"                                                                   
[   20.756988] Disabling unused clock "gpio6_dbck"                                                                   
[   20.761596] Disabling unused clock "gpt9_fck"                                                                     
[   20.765991] Disabling unused clock "gpt8_fck"                                                                     
[   20.770416] Disabling unused clock "gpt7_fck"                                                                     
[   20.774810] Disabling unused clock "gpt6_fck"                                                                     
[   20.779235] Disabling unused clock "gpt5_fck"                                                                     
[   20.783660] Disabling unused clock "gpt4_fck"                                                                     
[   20.788055] Disabling unused clock "gpt3_fck"                                                                     
[   20.792480] Disabling unused clock "gpt2_fck"                                                                     
[   20.796875] Disabling unused clock "gpt1_ick"                                                                     
[   20.801300] Disabling unused clock "wdt1_ick"                                                                     
[   20.805694] Disabling unused clock "wdt2_ick"                                                                     
[   20.810119] Disabling unused clock "wdt2_fck"                                                                     
[   20.814544] Disabling unused clock "gpio1_dbck"                                                                   
[   20.819122] Disabling unused clock "gpt1_fck"                                                                     
[   20.823730] Disabling unused clock "cam_ick"                                                                      
[   20.828063] Disabling unused clock "cam_mclk"                                                                     
[   20.832519] Disabling unused clock "des1_ick"                                                                     
[   20.836914] Disabling unused clock "sha11_ick"                                                                    
[   20.841430] Disabling unused clock "rng_ick"                                                                      
[   20.845764] Disabling unused clock "aes1_ick"                                                                     
[   20.850158] Disabling unused clock "ssi_ick"                                                                      
[   20.854492] Disabling unused clock "mailboxes_ick"                                                                
[   20.859313] Disabling unused clock "mcbsp_ick"                                                                    
[   20.863830] Disabling unused clock "mcbsp_ick"                                                                    
[   20.868316] Disabling unused clock "gpt10_ick"                                                                    
[   20.872833] Disabling unused clock "gpt11_ick"                                                                    
[   20.877349] Disabling unused clock "hdq_ick"                                                                      
[   20.881652] Disabling unused clock "mspro_ick"                                                                    
[   20.886169] Disabling unused clock "des2_ick"                                                                     
[   20.890563] Disabling unused clock "sha12_ick"                                                                    
[   20.895080] Disabling unused clock "aes2_ick"                                                                     
[   20.899475] Disabling unused clock "icr_ick"                                                                      
[   20.903808] Disabling unused clock "pka_ick"                                                                      
[   20.908111] Disabling unused clock "ssi_ssr_fck"                                                                  
[   20.912811] Disabling unused clock "hdq_fck"                                                                      
[   20.917327] Disabling unused clock "mcbsp_fck"                                                                    
[   20.921813] Disabling unused clock "mcbsp_fck"                                                                    
[   20.926330] Disabling unused clock "mspro_fck"                                                                    
[   20.930816] Disabling unused clock "gpt11_fck"                                                                    
[   20.935333] Disabling unused clock "gpt10_fck"                                                                    
[   20.939849] Disabling unused clock "dpll4_m6x2_ck"                                                                
[   20.944702] Disabling unused clock "dpll3_m3x2_ck"                                                                
[   20.949554] Disabling unused clock "sys_clkout1"                                                                  
[   20.954254] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1                               
[   20.968780] registered taskstats version 1                                                                        
[   20.974121] fbcvt: 1024x768@60: CVT Name - .786M3-R                                                               
[   21.001678] Console: switching to colour frame buffer device 128x48                                               
[   21.019104] clock: clksel_round_rate_div: dpll4_m4_ck target_rate 48000000                                        
[   21.026214] clock: new_div = 9, new_rate = 48000000                                                               
[   21.034088] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)                                               
[   21.056976] mmc0: new high speed SD card at address 1145                                                          
[   21.063049] mmcblk0: mmc0:1145 SD02G 1.83 GiB                                                                     
[   21.067962]  mmcblk0: p1 p2                                                                                       
[   21.294006] eth0 (asix): not using net_device_ops yet                                                             
[   21.299926] eth0: register 'asix' at usb-ehci-omap.0-2.2, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:06:c4:57        
[   21.393066] usb 1-2.4: new high speed USB device using ehci-omap and address 4                                    
[   21.518951] usb 1-2.4: configuration #1 chosen from 1 choice                                                      
[   21.526580] hub 1-2.4:1.0: USB hub found                                                                          
[   21.531372] hub 1-2.4:1.0: 4 ports detected                                                                       
[   21.823577] usb 1-2.4.1: new low speed USB device using ehci-omap and address 5                                   
[   21.953704] usb 1-2.4.1: configuration #1 chosen from 1 choice                                                    
[   21.967559] input: Logitech Optical USB Mouse as /devices/platform/ehci-omap.0/usb1/1-2/1-2.4/1-2.4.1/1-2.4.1:1.02
[   21.986114] generic-usb 0003:046D:C016.0001: input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-ehci-0
[   22.088409] usb 1-2.4.2: new low speed USB device using ehci-omap and address 6                                   
[   22.219512] usb 1-2.4.2: configuration #1 chosen from 1 choice                                                    
[   22.235900] input: HID 04f3:0103 as /devices/platform/ehci-omap.0/usb1/1-2/1-2.4/1-2.4.2/1-2.4.2:1.0/input/input3 
[   22.250885] generic-usb 0003:04F3:0103.0002: input: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-ehci-omap.0-2.40
[   22.276123] input: HID 04f3:0103 as /devices/platform/ehci-omap.0/usb1/1-2/1-2.4/1-2.4.2/1-2.4.2:1.1/input/input4 
[   22.292663] generic-usb 0003:04F3:0103.0003: input: USB HID v1.10 Device [HID 04f3:0103] on usb-ehci-omap.0-2.4.21
[   26.784179] kjournald starting.  Commit interval 5 seconds                                                        
[   26.829589] EXT3 FS on mmcblk0p2, internal journal                                                                
[   26.839569] EXT3-fs: recovery complete.                                                                           
[   27.092559] EXT3-fs: mounted filesystem with ordered data mode.                                                   
[   27.103057] VFS: Mounted root (ext3 filesystem) on device 179:2.                                                  
[   27.113800] Freeing init memory: 204K                                                                             
[   34.775878] uncorrectable error : <3>end_request: I/O error, dev mtdblock0, sector 0                              
[   34.783721] Buffer I/O error on device mtdblock0, logical block 0                                                 
[   35.148834] uncorrectable error : <3>end_request: I/O error, dev mtdblock0, sector 8                              
[   35.156768] Buffer I/O error on device mtdblock0, logical block 1                                                 
[   35.267791] uncorrectable error : <3>end_request: I/O error, dev mtdblock0, sector 16                             
[   35.275726] Buffer I/O error on device mtdblock0, logical block 2                                                 
[   35.331329] uncorrectable error : <3>end_request: I/O error, dev mtdblock0, sector 24                             
[   35.339263] Buffer I/O error on device mtdblock0, logical block 3                                                 
[   35.394592] uncorrectable error : <3>end_request: I/O error, dev mtdblock0, sector 0                              
[   35.402435] Buffer I/O error on device mtdblock0, logical block 0                                                 
[   36.684143] FAT: IO charset iso8859-1 not found                                                                   
[   39.959899] ipv6: disagrees about version of symbol struct_module                                                 
[   39.994750] irda: disagrees about version of symbol struct_module                                                 
[   40.005432] ircomm: disagrees about version of symbol struct_module                                               
[   40.017547] ircomm_tty: disagrees about version of symbol struct_module                                           
[   41.687622] eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1                                                       
[   41.948944] eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1                                                       
[   42.976959] ipv6: disagrees about version of symbol struct_module                                                 
[   43.062438] ipv6: disagrees about version of symbol struct_module                                                 
[   44.849395] ipv6: disagrees about version of symbol struct_module                                                 
[   45.715362] ipv6: disagrees about version of symbol struct_module                                                 
[   45.858184] ipv6: disagrees about version of symbol struct_module                                                 
[   45.925842] ipv6: disagrees about version of symbol struct_module                                                 
[   46.094299] ipv6: disagrees about version of symbol struct_module                                                 
                                                                                                                     
.-------.                                                                                                            
|       |                  .-.                                                                                       
|   |   |-----.-----.-----.| |   .----..-----.-----.                                                                 
|       |     | __  |  ---'| '--.|  .-'|     |     |                                                                 
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |                                                                 
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'                                                                 
                -'  |                                                                                                
                '---'                                                                                                
                                                                                                                     
The Angstrom Distribution beagleboard ttyS2                                                                          
                                                                                                                     
Angstrom 2009.X-stable beagleboard ttyS2                                                                             
                                                                                                                     
beagleboard login: 
5-4 5-17 Console Setup Code Snippet from .../kernel/printk.c
/*
 * Set up a list of consoles.  Called from init/main.c
 */
static int __init console_setup(char *str)
{
        char buf[sizeof(console_cmdline[0].name) + 4]; /* 4 for index */
        char *s, *options, *brl_options = NULL;
        int idx;

#ifdef CONFIG_A11Y_BRAILLE_CONSOLE
        if (!memcmp(str, "brl,", 4)) {
                brl_options = "";
                str += 4;
        } else if (!memcmp(str, "brl=", 4)) {
                brl_options = str + 4;
                str = strchr(brl_options, ',');
                if (!str) {
                        printk(KERN_ERR "need port name after brl=\n");
                        return 1;
                }
                *(str++) = 0;
        }
#endif

        /*
         * Decode str into name, index, options.
         */
        if (str[0] >= '0' && str[0] <= '9') {
                strcpy(buf, "ttyS");
                strncpy(buf + 4, str, sizeof(buf) - 5);
        } else {
                strncpy(buf, str, sizeof(buf) - 1);
        }
        buf[sizeof(buf) - 1] = 0;
        if ((options = strchr(str, ',')) != NULL)
                *(options++) = 0;
#ifdef __sparc__
        if (!strcmp(str, "ttya"))
                strcpy(buf, "ttyS0");
        if (!strcmp(str, "ttyb"))
                strcpy(buf, "ttyS1");
#endif
        for (s = buf; *s; s++)
                if ((*s >= '0' && *s <= '9') || *s == ',')
                        break;
        idx = simple_strtoul(s, NULL, 10);
        *s = 0;

        __add_preferred_console(buf, idx, options, brl_options);
        console_set_on_cmdline = 1;
        return 1;
}
__setup("console=", console_setup);
5-5 5-18 Family of __setup Macro Definitions from .../include/linux/init.h
...
#define __setup_param(str, unique_id, fn, early)			\
	static char __setup_str_##unique_id[] __initdata __aligned(1) = str; \
	static struct obs_kernel_param __setup_##unique_id	\
		__used __section(.init.setup)			\
		__attribute__((aligned((sizeof(long)))))	\
		= { __setup_str_##unique_id, fn, early }

#define __setup(str, fn)					\
	__setup_param(str, fn, fn, 0)
...
5-6 5-19 Kernel Command Line Processing
extern struct obs_kernel_param __setup_start[], __setup_end[];

static int __init obsolete_checksetup(char *line)
{
	struct obs_kernel_param *p;
	int had_early_param = 0;

	p = __setup_start;
	do {
		int n = strlen(p->str);
		if (!strncmp(line, p->str, n)) {
			if (p->early) {
				/* Already done in parse_early_param?
				 * (Needs exact match on param part).
				 * Keep iterating, as we can have early
				 * params and __setups of same names 8( */
				if (line[n] == '\0' || line[n] == '=')
					had_early_param = 1;
			} else if (!p->setup_func) {
				printk(KERN_WARNING "Parameter %s is obsolete,"
				       " ignored\n", p->str);
				return 1;
			} else if (p->setup_func(line + n))
				return 1;
		}
		p++;
	} while (p < __setup_end);

	return had_early_param;
}

5-7 5-22 Example Initialization Routine - .../arch/arm/kernel/setup.c
static int __init customize_machine(void)
{
	/* customizes platform devices, or adds new ones */
	if (init_machine)
		init_machine();
	return 0;
}
arch_initcall(customize_machine);
5-8 5-22 initcall Family of Macros - .../include/linux/init.h
#define __define_initcall(level,fn,id) \
	static initcall_t __initcall_##fn##id __used \
	__attribute__((__section__(".initcall" level ".init"))) = fn

/*
 * Early initcalls run before initializing SMP.
 *
 * Only for built-in code, not modules.
 */
#define early_initcall(fn)		__define_initcall("early",fn,early)

/*
 * A "pure" initcall has no dependencies on anything else, and purely
 * initializes variables that couldn't be statically initialized.
 *
 * This only exists for built-in code, not for modules.
 */
#define pure_initcall(fn)		__define_initcall("0",fn,0)

#define core_initcall(fn)		__define_initcall("1",fn,1)
#define core_initcall_sync(fn)		__define_initcall("1s",fn,1s)
#define postcore_initcall(fn)		__define_initcall("2",fn,2)
#define postcore_initcall_sync(fn)	__define_initcall("2s",fn,2s)
#define arch_initcall(fn)		__define_initcall("3",fn,3)
#define arch_initcall_sync(fn)		__define_initcall("3s",fn,3s)
#define subsys_initcall(fn)		__define_initcall("4",fn,4)
#define subsys_initcall_sync(fn)	__define_initcall("4s",fn,4s)
#define fs_initcall(fn)			__define_initcall("5",fn,5)
#define fs_initcall_sync(fn)		__define_initcall("5s",fn,5s)
#define rootfs_initcall(fn)		__define_initcall("rootfs",fn,rootfs)
#define device_initcall(fn)		__define_initcall("6",fn,6)
#define device_initcall_sync(fn)	__define_initcall("6s",fn,6s)
#define late_initcall(fn)		__define_initcall("7",fn,7)
#define late_initcall_sync(fn)		__define_initcall("7s",fn,7s)

#define __initcall(fn) device_initcall(fn)
...
5-9 5-24 Creation of Kernel init Thread
static noinline void __init_refok rest_init(void)
	__releases(kernel_lock)
{
	int pid;

	kernel_thread(kernel_init, NULL, CLONE_FS | CLONE_SIGHAND);
	numa_default_policy();
	pid = kernel_thread(kthreadd, NULL, CLONE_FS | CLONE_FILES);
	kthreadd_task = find_task_by_pid_ns(pid, &init_pid_ns);
	unlock_kernel();

	/*
	 * The boot idle thread must execute schedule()
	 * at least once to get things moving:
	 */
	init_idle_bootup_task(current);
	rcu_scheduler_starting();
	preempt_enable_no_resched();
	schedule();
	preempt_disable();

	/* Call into cpu_idle with preempt disabled */
	cpu_idle();
}

5-10 5-25 Initialization via initcalls
extern initcall_t __initcall_start[], __initcall_end[], __early_initcall_end[];

static void __init do_initcalls(void)
{
	initcall_t *call;

	for (call = __early_initcall_end; call < __initcall_end; call++)
		do_one_initcall(*call);

	/* Make sure there is no pending stuff from the initcall sequence */
	flush_scheduled_work();
}
5-11 5-27 Final Boot Steps from main.c
static noinline int init_post(void)
{

<... lines trimmed for clarity ...>

	if (execute_command) {
		run_init_process(execute_command);
		printk(KERN_WARNING "Failed to execute %s.  Attempting "
					"defaults...\n", execute_command);
	}
	run_init_process("/sbin/init");
	run_init_process("/etc/init");
	run_init_process("/bin/init");
	run_init_process("/bin/sh");

	panic("No init found.  Try passing init= option to kernel.");
}