Difference between revisions of "ECE597 Project Auto HUD"

From eLinux.org
Jump to: navigation, search
m (Steps: Added step to decide on hardware)
Line 1: Line 1:
 +
[[category:ECE597]]
 +
 
==Project Overview==
 
==Project Overview==
 
The goal of this project is to use the beagle board to run image recognition on a camera feed located inside a car, and then signaling to the driver via a pico projector various objects of interest.  
 
The goal of this project is to use the beagle board to run image recognition on a camera feed located inside a car, and then signaling to the driver via a pico projector various objects of interest.  

Revision as of 20:13, 20 April 2010


Project Overview

The goal of this project is to use the beagle board to run image recognition on a camera feed located inside a car, and then signaling to the driver via a pico projector various objects of interest.

Team Members

Chris Routh

J. Cody Collins

Greg Jackson

Keqiong Xin

Steps

  • Create Minimal Linux Image that can run OpenCV and run the display
  • Determine hardware needed for the project
  • Work on getting a camera functioning on the beagle board
  • OpenCV running nativly on beagle with min config
  • OpenCV working on video stream
  • Projector working on Beagle
  • Car integration (power)
  • Algorithm development