Difference between revisions of "ECE597 Project Auto HUD"

From eLinux.org
Jump to: navigation, search
(Created page with '==Project Overview== The goal of this project is to use the beagle board to run image recognition on a camera feed located inside a car, and then signaling to the driver via a pi…')
 
Line 3: Line 3:
  
 
==Team Members==
 
==Team Members==
Chris Routh
+
[[user:routhcr | Chris Routh]]
  
 
[[user:collinjc | J. Cody Collins]]
 
[[user:collinjc | J. Cody Collins]]
Line 10: Line 10:
  
 
Keqiong Xin
 
Keqiong Xin
 +
 +
==Steps==
 +
* Create Minimal Linux Image that can run OpenCV and run the display
 +
* Work on getting a camera functioning on the beagle board
 +
* OpenCV running nativly on beagle with min config
 +
* OpenCV working on video stream
 +
* Projector working on Beagle
 +
* Car integration (power)
 +
* Algorithm development

Revision as of 18:05, 22 March 2010

Project Overview

The goal of this project is to use the beagle board to run image recognition on a camera feed located inside a car, and then signaling to the driver via a pico projector various objects of interest.

Team Members

Chris Routh

J. Cody Collins

Greg Jackson

Keqiong Xin

Steps

  • Create Minimal Linux Image that can run OpenCV and run the display
  • Work on getting a camera functioning on the beagle board
  • OpenCV running nativly on beagle with min config
  • OpenCV working on video stream
  • Projector working on Beagle
  • Car integration (power)
  • Algorithm development