Difference between revisions of "ECE597 Project Sumo Robot"
(Noted specific sensors) |
m (moved ECE597 Sumo Robot to ECE597 Project Sumo Robot) |
(No difference)
|
Revision as of 13:18, 24 March 2010
The goal of this project is to create a BeagleBoard-powered robot capable of competing in an autonomous sumo competition in the 3.0 kg weight class (an example). This would have minor hardware and electronics elements, but would focus on communication with sensors using the BeagleBoard and the Linux kernel. At minimum, this involves sensors to detect the edge of the ring and the opposing robot.
Contents
Links
Sensors
- IR rangefinders -- Sharp GP2D12
- Sonic rangefinders (need a way to power-cycle these [1]) -- SRF08
- Edge sensors (used to detect the white lines at the edge of the ring)
- Header for accelerometer module
- USB camera (eventually; low priority)
- Contact sensors (Cherry roller leaf switches)
Other I/O
- Microcontroller to do motor control PWM
- Socket for ATMega 328
- Use four L298 motor drivers (one for each motor)
- Input button to start start match
- LEDs
- "Ready" LED (blinks when counting down to match start)
Misc
- Power conversion
- Motors take 7.2 V, 4A at stall