Please note that User Registration has been temporarily disabled due to a recent increase in automated registrations. If anyone needs an account, please request one here: RequestAccount. Thanks for your patience!--Wmat (talk)
Please email User:Wmat if you experience any issues with the Request Account form.

Difference between revisions of "ECE597 icassp 2010 Lab 2 The Boot Sequence"

From eLinux.org
Jump to: navigation, search
(Connecting to the Beagle's serial port: Added details)
(Connecting to the Beagle's serial port: Added table)
Line 8: Line 8:
 
If your Beagle is still running do this to shut it down.
 
If your Beagle is still running do this to shut it down.
 
* Start HyperTerminal
 
* Start HyperTerminal
* Go to Start:Accessories:Communications:HyperTerminal and create a new connection.  Call it '''Beagle'''.  
+
{|
[[File:HyperTerminal_init.png|200px]]
+
| Go to '''Start:Accessories:Communications:HyperTerminal''' and create a new connection.  Call it '''Beagle'''.  
* Select '''USB''' if you are using the USB to serial port adapter, or select '''COM1''' if you are directly connected to the serial port  
+
|[[File:HyperTerminal_init.png|200px]]
[[File:HyperTerminal_Connect_To.png‎|200px]]
+
|-
* Select the setting shown  
+
| Select '''USB''' if you are using the USB to serial port adapter, or select '''COM1''' if you are directly connected to the serial port  
[[File:HyperTerminal_Properties.png‎|200px]]
+
| [[File:HyperTerminal_Connect_To.png‎|200px]]
 +
|-
 +
| Select the settings shown  
 +
| [[File:HyperTerminal_Properties.png‎|200px]]
 +
|}
 +
You are now attached to the Beagle.  Hit return and you'll see:
 +
<pre>
 +
.-------.                                         
 +
|      |                  .-.                     
 +
|  |  |-----.-----.-----.| |  .----..-----.-----.
 +
|      |    | __  |  ---'| '--.|  .-'|    |    |
 +
|  |  |  |  |    |---  ||  --'|  |  |  '  | | | |
 +
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
 +
                -'  |
 +
                '---'
 +
 
 +
The Angstrom Distribution beagleboard ttyS2
 +
 
 +
Angstrom 2009.X-stable beagleboard ttyS2
 +
 
 +
beagleboard login: root
 +
root@beagleboard:~#
 +
</pre>
 +
Login as '''root'''.
  
 
== Shutting Down and Rebooting on U-Boot ==
 
== Shutting Down and Rebooting on U-Boot ==

Revision as of 17:35, 13 March 2010


In the first lab you saw the BeagleBoard from a users point of view. In this lab we'll take a look at what's going on inside.

Connecting to the Beagle's serial port

If your Beagle is still running do this to shut it down.

  • Start HyperTerminal
Go to Start:Accessories:Communications:HyperTerminal and create a new connection. Call it Beagle. HyperTerminal init.png
Select USB if you are using the USB to serial port adapter, or select COM1 if you are directly connected to the serial port HyperTerminal Connect To.png
Select the settings shown HyperTerminal Properties.png

You are now attached to the Beagle. Hit return and you'll see:

.-------.                                           
|       |                  .-.                      
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beagleboard ttyS2

Angstrom 2009.X-stable beagleboard ttyS2

beagleboard login: root
root@beagleboard:~#

Login as root.

Shutting Down and Rebooting on U-Boot

yoder@beagleboard:~$ shutdown -r now

As your Beagle reboots you will see:

Texas Instruments X-Loader 1.4.2 (Feb 19 2009 - 12:01:24)
Reading boot sector
Loading u-boot.bin from mmc

Which is then followed by

U-Boot 2009.11-rc1 (Jan 08 2010 - 21:19:52)
 
OMAP3530-GP ES3.1, CPU-OPP2 L3-165MHz
OMAP3 Beagle board + LPDDR/NAND
I2C:   ready
DRAM:  256 MB
NAND:  256 MiB
In:    serial
Out:   serial
Err:   serial
Board revision C4
Die ID #5444000400000000040365fa1400e007
Hit any key to stop autoboot:  0
OMAP3 beagleboard.org #

Hit a key before it goes on to boot Linux. What has happened so far is:

  1. When power is first applied the Beagle jumps to a boot loader in the OMAPs ROM.
  2. This bootloader finds the SD card run runs a file called MLO.
  3. MLO is X-Loader with a couple things added. The first bit of output above is from X-Loader.
  4. X-Loader looks and finds u-boot.bin and starts running it.

Das U-Boot is universal boot loader that is used on many embedded systems. You can find more information at http://www.denx.de/wiki/U-Boot. You can list the commands it understands:

OMAP3 beagleboard.org # help
?       - alias for 'help'
base    - print or set address offset
bdinfo  - print Board Info structure
boot    - boot default, i.e., run 'bootcmd'
bootd   - boot default, i.e., run 'bootcmd'
bootm   - boot application image from memory
chpart  - change active partition
cmp     - memory compare
coninfo - print console devices and information
cp      - memory copy
crc32   - checksum calculation
echo    - echo args to console
editenv - edit environment variable
exit    - exit script
ext2load- load binary file from a Ext2 filesystem
ext2ls  - list files in a directory (default /)
false   - do nothing, unsuccessfully
fatinfo - print information about filesystem
fatload - load binary file from a dos filesystem
fatls   - list files in a directory (default /)
fsinfo  - print information about filesystems
fsload  - load binary file from a filesystem image
go      - start application at address 'addr'
help    - print command description/usage
i2c     - I2C sub-system
imxtract- extract a part of a multi-image
itest   - return true/false on integer compare
loadb   - load binary file over serial line (kermit mode)
loads   - load S-Record file over serial line
loady   - load binary file over serial line (ymodem mode)
loop    - infinite loop on address range
ls      - list files in a directory (default /)
md      - memory display
mm      - memory modify (auto-incrementing address)
mmc     - MMC sub-system
mtdparts- define flash/nand partitions
mtest   - simple RAM read/write test
mw      - memory write (fill)
nand    - NAND sub-system
nandecc - nandecc - switch OMAP3 NAND ECC calculation algorithm

nboot   - boot from NAND device
nm      - memory modify (constant address)
printenv- print environment variables
reset   - Perform RESET of the CPU
run     - run commands in an environment variable
saveenv - save environment variables to persistent storage
setenv  - set environment variables
showvar - print local hushshell variables
sleep   - delay execution for some time
source  - run script from memory
test    - minimal test like /bin/sh
true    - do nothing, successfully
version - print monitor version

U-Boot source code is available is highly configurable, therefore the command list can be expanded or reduced to fit your application. Try:

OMAP3 beagleboard.org # bdi
arch_number = 0x0000060A
env_t       = 0x00000000
boot_params = 0x80000100
DRAM bank   = 0x00000000
-> start    = 0x80000000
-> size     = 0x08000000
DRAM bank   = 0x00000001
-> start    = 0x88000000
-> size     = 0x08000000
baudrate    = 115200 bps

This gives you some information about the board. It appears we have some RAM starting at 0x8000 0000.

Booting Linux

Here's what happens when you boot Linux:

OMAP3 beagleboard.org # print bootcmd
bootcmd=mmc init;fatload mmc 0 80300000 uImage;bootm 80300000
OMAP3 beagleboard.org # print bootargs
bootargs=console=ttyS2,115200n8 console=tty0 root=/dev/mmcblk0p2 rw rootfstype=t