Difference between revisions of "EVM PWM.c"

From eLinux.org
Jump to: navigation, search
m (Fix spelling of category)
 
(4 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 +
This seems to work fine, but I only guessed at the registers and start-up sequence, perhaps someone could verify they are correct. They certainly work.
 +
 
<code><pre>
 
<code><pre>
 
// PWM driver - Andrew Armstrong 2007
 
// PWM driver - Andrew Armstrong 2007
Line 34: Line 36:
  
 
#define SUCCESS 0
 
#define SUCCESS 0
#define DEVICE_NAME "fb3_pwm" /* Dev name as it appears in /proc/devices  */
+
#define DEVICE_NAME "evm_pwm" /* Dev name as it appears in /proc/devices  */
 
#define BUF_LEN 80 /* Max length of the message from the device */
 
#define BUF_LEN 80 /* Max length of the message from the device */
  
Line 255: Line 257:
  
 
</pre></code>
 
</pre></code>
 +
 +
 +
[[Category:DaVinci]]

Latest revision as of 13:34, 27 October 2011

This seems to work fine, but I only guessed at the registers and start-up sequence, perhaps someone could verify they are correct. They certainly work.

// PWM driver - Andrew Armstrong 2007

// Used a skeleton from somewhere, cannot remember where though - oops!

#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/major.h>
#include <linux/root_dev.h>
#include <asm/uaccess.h>	/* for put_user */
#include <asm/setup.h>
#include <asm/semaphore.h>
#include <asm/hardware/clock.h>
#include <asm/io.h>
#include <asm/mach-types.h>

#include <asm/mach/arch.h>
#include <asm/mach/map.h>

#include <asm/arch/hardware.h>

/*  
 *  Prototypes - this would normally go in a .h file
 */
int init_module(void);
void cleanup_module(void);
static int device_open(struct inode *, struct file *);
static int device_release(struct inode *, struct file *);
static ssize_t device_read(struct file *, char *, size_t, loff_t *);
static ssize_t device_write(struct file *, const char *, size_t, loff_t *);

#define SUCCESS 0
#define DEVICE_NAME "evm_pwm"	/* Dev name as it appears in /proc/devices   */
#define BUF_LEN 80		/* Max length of the message from the device */

/* 
 * Global variables are declared as static, so are global within the file. 
 */

static int Major;		/* Major number assigned to our device driver */
static int Device_Open = 0;	/* Is device open?  
				 * Used to prevent multiple access to device */
static char msg[BUF_LEN];	/* The msg the device will give when asked */
static char *msg_Ptr;

static struct file_operations fops = {
	.read = device_read,
	.write = device_write,
	.open = device_open,
	.release = device_release
};

//********************************************************************************

static int PWMStatus=1; //1 = on 2 = off 

//********************************************************************************

#define PWM0_BASE           __REG(0x01C22000)

#define PWM0_PID            __REG(0x01C22000)

#define PWM0_PCR            __REG(0x01C22004)

#define PWM0_CFG            __REG(0x01C22008)

#define PWM0_START          __REG(0x01C2200C)

#define PWM0_RPT            __REG(0x01C22010)

#define PWM0_PER            __REG(0x01C22014)

#define PWM0_PH1D           __REG(0x01C22018)

void pwm_power(int option)
{
	
	if(option==0)
	{
		PWM0_CFG   = 0x00000000;
		PWMStatus = 0;
	}
	else
	{
		PWM0_PCR   = 0x00000001;
		PWM0_CFG   = 0x00000001;
		PWM0_RPT   = 0x99999999;
		PWM0_PER   = 0x00002000;
		PWM0_PH1D  = 0x00001000;
		PWM0_START = 0x00000001;
		PWMStatus = 1;
	}
}

//AA07 Checks a character for a boolean 0 or 1 returns appropriately, returns 999 on error
int checkchar(char s)
{

	if (s >= '0' && s <= '1')
	{
		if (s == '0')
		{
			return 0;
		}
		else
		{
			return 1;
		}
	}
	else
	{
		return 999;
	}

}

int init_module(void)
{
        Major = register_chrdev(0, DEVICE_NAME, &fops);

	if (Major < 0) {
	  printk(KERN_ALERT "Registering char device failed with %d\n", Major);
	  return Major;
	}

	printk(KERN_INFO "Create driver node:- 'mknod /dev/%s c %d 0'.\n", DEVICE_NAME, Major);
	printk(KERN_INFO "[cat] to see status and [echo 0] for off and [1] for on\n");

	printk(KERN_ALERT "Turning PWM on (default setting)\n");
	pwm_power(0);
	pwm_power(1);

	return 0;
}

/*
 * This function is called when the module is unloaded
 */
void cleanup_module(void)
{
	/* 
	 * Unregister the device 
	 */
	int ret = unregister_chrdev(Major, DEVICE_NAME);
	if (ret < 0)
		printk(KERN_ALERT "Error in unregister_chrdev: %d\n", ret);
}

/*
 * Methods
 */

/* 
 * Called when a process tries to open the device file, like
 * "cat /dev/mycharfile"
 */
static int device_open(struct inode *inode, struct file *file)
{
	if (Device_Open)
		return -EBUSY;

	Device_Open++;
	sprintf(msg, "%d\n", PWMStatus);
	msg_Ptr = msg;
	try_module_get(THIS_MODULE);

	return SUCCESS;
}

/* 
 * Called when a process closes the device file.
 */
static int device_release(struct inode *inode, struct file *file)
{
	Device_Open--;		/* We're now ready for our next caller */

	/* 
	 * Decrement the usage count, or else once you opened the file, you'll
	 * never get get rid of the module. 
	 */
	module_put(THIS_MODULE);

	return 0;
}

/* 
 * Called when a process, which already opened the dev file, attempts to
 * read from it.
 */
static ssize_t device_read(struct file *filp,	/* see include/linux/fs.h   */
			   char *buffer,	/* buffer to fill with data */
			   size_t length,	/* length of the buffer     */
			   loff_t * offset)
{
	/*
	 * Number of bytes actually written to the buffer 
	 */
	int bytes_read = 0;

	/*
	 * If we're at the end of the message, 
	 * return 0 signifying end of file 
	 */
	if (*msg_Ptr == 0)
		return 0;

	/* 
	 * Actually put the data into the buffer 
	 */
	while (length && *msg_Ptr) {

		/* 
		 * The buffer is in the user data segment, not the kernel 
		 * segment so "*" assignment won't work.  We have to use 
		 * put_user which copies data from the kernel data segment to
		 * the user data segment. 
		 */
		put_user(*(msg_Ptr++), buffer++);

		length--;
		bytes_read++;
	}

	/* 
	 * Most read functions return the number of bytes put into the buffer
	 */
	return bytes_read;
}

/*  
 * Called when a process writes to dev file: echo "hi" > /dev/hello 
 */
static ssize_t
device_write(struct file *filp, const char *buff, size_t len, loff_t * off)
{
	int i = checkchar(buff[0]);
	
	if (i == 999)
	{
		printk(KERN_ALERT "Error in option, use 0 (off) or 1 (on)\n");
	}
	else
	{
		printk(KERN_ALERT "Setting value %d :- 0 (off) or 1 (on)\n",i);
		pwm_power(i);
	}

	return len;

}