EVM input buttons

From eLinux.org
Revision as of 22:55, 21 May 2007 by SpaceMonkey (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

If you would like some input buttons for your evm you can solder some push buttons right onto the board. Just connect them between the LEDs [REF CHECK WHICH SIDE OF LED!] and ground.

If you want to retain LED functionality, just send a command to turn off the LED prior to polling for the input status, otherwise you will read the output value rather than the switch!