EVM input buttons

From eLinux.org
Revision as of 20:35, 27 October 2011 by Cschalle (Talk | contribs) (Fix spelling of category)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

If you would like some input buttons for your evm you can solder some push buttons right onto the board.

Just connect them between the LEDs [REF CHECK WHICH SIDE OF LED!] and ground.

If you want to retain LED functionality, just send a command to turn off the LED prior to polling for the input status, otherwise you will read the output value rather than the switch!

Buttons.jpg