Difference between revisions of "Ez Usb"

From eLinux.org
Jump to: navigation, search
(fiirmware kit + two development boards added, cosmetic changes)
(One board added, minor changes)
Line 29: Line 29:
 
* [http://www.kanda.com/index.php3?cs=1&bc=direct&bw=%2Fbrowse.php3%3Fnode%3D118%26semisupport%3D Quick USB Module]
 
* [http://www.kanda.com/index.php3?cs=1&bc=direct&bw=%2Fbrowse.php3%3Fnode%3D118%26semisupport%3D Quick USB Module]
 
* [http://www.elrasoft.com/ High-Speed USB Module]
 
* [http://www.elrasoft.com/ High-Speed USB Module]
* [http://www.ztex.de/usb-fpga-1/usb-fpga-1.2.e.html ZTEX USB FPGA Module with EZ-USB Microcontroller and Spartan-3 FPGA]
+
* [http://www.ztex.de/usb-fpga-1/usb-fpga-1.2.e.html ZTEX USB-FPGA-Module 1.2 with EZ-USB Microcontroller and Spartan 3]
* [http://www.ztex.de/usb-1/usb-1.0.e.html ZTEX USB Module with EZ-USB Microcontroller and microSD socket for up to 2GB Flash]
+
* [http://www.ztex.de/usb-fpga-1/usb-fpga-1.11.e.html ZTEX USB-FPGA-Module 1.11 with EZ-USB Microcontroller and Spartan 6 and 64 MB DDR SDRAM]
 +
* [http://www.ztex.de/usb-1/usb-1.0.e.html ZTEX USB-Module 1.0 with EZ-USB Microcontroller and microSD socket]

Revision as of 05:31, 30 July 2010

EZ-USB Based Device List

Firmware Kit + Driver API

An Open Source Firmware Kit with platform independent driver API is available at http://www.ztex.de/firmware-kit.

It is mainly intended for our USB and/or FPGA boards but should run on every EZ-USB based hardware. The package currently runs under Linux and Windows.

The Firmware Kit is written in C and requires the SDCC compiler. The Firmware is assembled using a macro processor which allows to specify all required settings by a few macros. All necessary USB descriptors and the descriptor handling routines are generated automatically.

The driver API is written in Java and allows platform independent device drivers. API's in other programming languages are planned.

General Products

Development Boards