Please note that User Registration has been temporarily disabled due to a recent increase in automated registrations. If anyone needs an account, please request one here: RequestAccount. Thanks for your patience!--Wmat (talk)
Please email User:Wmat if you experience any issues with the Request Account form.

Difference between revisions of "Ez Usb"

From eLinux.org
Jump to: navigation, search
(One board added, minor changes)
(Add category)
Line 32: Line 32:
 
* [http://www.ztex.de/usb-fpga-1/usb-fpga-1.11.e.html ZTEX USB-FPGA-Module 1.11 with EZ-USB Microcontroller and Spartan 6 and 64 MB DDR SDRAM]
 
* [http://www.ztex.de/usb-fpga-1/usb-fpga-1.11.e.html ZTEX USB-FPGA-Module 1.11 with EZ-USB Microcontroller and Spartan 6 and 64 MB DDR SDRAM]
 
* [http://www.ztex.de/usb-1/usb-1.0.e.html ZTEX USB-Module 1.0 with EZ-USB Microcontroller and microSD socket]
 
* [http://www.ztex.de/usb-1/usb-1.0.e.html ZTEX USB-Module 1.0 with EZ-USB Microcontroller and microSD socket]
 +
 +
 +
[[Category:Development Tools]]

Revision as of 07:22, 28 October 2011

EZ-USB Based Device List

Firmware Kit + Driver API

An Open Source Firmware Kit with platform independent driver API is available at http://www.ztex.de/firmware-kit.

It is mainly intended for our USB and/or FPGA boards but should run on every EZ-USB based hardware. The package currently runs under Linux and Windows.

The Firmware Kit is written in C and requires the SDCC compiler. The Firmware is assembled using a macro processor which allows to specify all required settings by a few macros. All necessary USB descriptors and the descriptor handling routines are generated automatically.

The driver API is written in Java and allows platform independent device drivers. API's in other programming languages are planned.

General Products

Development Boards