FR:RPi Debian Python3

From eLinux.org
Revision as of 21:09, 11 June 2013 by Xavier (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


Installation de Python 3.2.3 sur Debian Squeeze

This guide is aimed at developers, although it can be used by beginners if they know what they are after. It is provided as it is realised that the latest version of Python (3.2) is not available in Debian Squeeze. Other Linux RPi distributions will in future contain this by default. Note that Raspbian already includes Python 3.

To install the latest version of Python (3.2.3) to Debian:

# install dependencies
sudo apt-get install zlib1g-dev
sudo apt-get install libncurses-dev
sudo apt-get install libbz2-dev
sudo apt-get install libreadline-dev
sudo apt-get install sqlite3 libsqlite3-dev
sudo apt-get install libssl-dev
sudo apt-get install libgdbm-dev
sudo apt-get install tk-dev

wget http://www.python.org/ftp/python/3.2.3/Python-3.2.3.tar.bz2
tar xvfj Python-3.2.3.tar.bz2 
cd Python-3.2.3

./configure
# (The 'configure' command takes approx 5 mins)

make
# (The 'make' command takes approx 46 min when you are not running X)

sudo make install
# (The 'make install' command takes approx 5 mins)

cd ~

Raccourci IDLE dans le menu LXDE

To add an idle icon to the programming menu in LXDE:

sudo mkdir /usr/local/share/applications
sudo nano /usr/local/share/applications/idle.desktop

Enter the following file contents:

[Desktop Entry]
Encoding=UTF-8
Exec=idle3 %F
Type=Application
Terminal=false
Name=IDLE
GenericName=IDLE
StartupNotify=false
Categories=Development;IDE;

Module Distribute

To install most other Python modules, you will probably want to install the 'distribute' module. This is a replacement for the now deprecated 'setuptools':

wget http://pypi.python.org/packages/source/d/distribute/distribute-0.6.26.tar.gz
tar xvfz distribute-0.6.26.tar.gz
cd distribute-0.6.26
sudo python3 setup.py install
cd ~

Module Numpy

This requires a lot of system resources (memory) to build. Run it with nothing else running - do not run inside X! You may need to enable swap space.

N.B. Takes around 1 hr 40 to build

wget http://pypi.python.org/packages/source/n/numpy/numpy-1.6.1.tar.gz
tar xvfz numpy-1.6.1.tar.gz
cd numpy-1.6.1
python3 setup.py build
sudo python3 setup.py install
cd ~

Module PyGame

The latest (stable) release of PyGame does not support Python 3.2 so you have to use the development source. Make sure that you install the numpy module first. Note that sound does not work yet - I'll update this guide with instructions when it has been fixed.

(Takes around 15 minutes to build).

# get pygame source code
sudo apt-get install mercurial
hg clone https://bitbucket.org/pygame/pygame
cd pygame

# install dependencies
sudo apt-get install libsdl-dev libsdl-image1.2-dev libsdl-mixer1.2-dev libsdl-ttf2.0-dev 
sudo apt-get install libsmpeg-dev libportmidi-dev libavformat-dev libswscale-dev

# build and install pygame
python3 setup.py build
sudo python3 setup.py install


Module PySide

As an alternative to PyQt you can use the compatible PySide module.

# update the apt-get repositories
sudo apt-get update 
# get pyside
sudo apt-get install python3-pyside

Module PyQt

Watch this space!

Module GPIO

Note that any programs that access GPIO using this module must be run as root.

wget http://pypi.python.org/packages/source/R/RPi.GPIO/RPi.GPIO-0.4.1a.tar.gz
tar xvfz RPi.GPIO-0.4.1a.tar.gz
cd RPi.GPIO-0.4.1a
sudo python3 setup.py install
cd ~