Difference between revisions of "Flameman/ipaq/kernel"

From eLinux.org
< Flameman‎ | ipaq
Jump to: navigation, search
(reports)
(reports)
Line 2: Line 2:
  
  
= reports =
+
= check it out =
 +
 
 +
== first kernel tests ==
  
 
{| border="1" cellspacing="0" cellpadding="5" align="center"
 
{| border="1" cellspacing="0" cellpadding="5" align="center"
Line 57: Line 59:
 
| __, myconfig
 
| __, myconfig
 
| __ , patched file[]={arch/arm/common/ipaq/micro_ts.c arch/arm/configs/h3600_defconfig, arch/arm/mach-sa1100/h3600_lcd.c arch/arm/mach-sa1100/ipaq.c drivers/soc/micro.c}
 
| __ , patched file[]={arch/arm/common/ipaq/micro_ts.c arch/arm/configs/h3600_defconfig, arch/arm/mach-sa1100/h3600_lcd.c arch/arm/mach-sa1100/ipaq.c drivers/soc/micro.c}
 +
| not tested, yet
 +
| not tested, yet
 +
| not tested, yet
 +
|-
 +
| '''2.6.19.my''' current working branch"
 +
| gcc-4.1.0/host=ppc
 +
| __, myconfig
 +
| __ , patched ~file[]={sleeve, touchscreen}
 
| not tested, yet
 
| not tested, yet
 
| not tested, yet
 
| not tested, yet
Line 95: Line 105:
  
  
status of sleeve hw
+
== status of sleeve hw with iPAQ 3600 kernel 2.6 ==
  
 
{| border="1" cellspacing="0" cellpadding="5" align="center"
 
{| border="1" cellspacing="0" cellpadding="5" align="center"
Line 111: Line 121:
 
|-
 
|-
 
| Nexicam 2x cf (+ broken ext batt)
 
| Nexicam 2x cf (+ broken ext batt)
 +
| -
 
| -
 
| -
 
| -
 
| -
Line 116: Line 127:
 
|-
 
|-
 
| SilverSlider (1x cf)
 
| SilverSlider (1x cf)
 +
| -
 
| -
 
| -
 
| -
 
| -
Line 123: Line 135:
 
| 2.6.19.my
 
| 2.6.19.my
 
| yes, nice
 
| yes, nice
 +
| not yet
 
| i am using this device with a pcmcia-to-CF2 adaptor in order to attach a microdrive
 
| i am using this device with a pcmcia-to-CF2 adaptor in order to attach a microdrive
 
|-
 
|-
 
| Compaq 1x pcmcia + ext. batt
 
| Compaq 1x pcmcia + ext. batt
 +
| -
 
| -
 
| -
 
| -
 
| -
Line 132: Line 146:
 
| Compaq 2x pcmcia
 
| Compaq 2x pcmcia
 
| 2.6.19.my
 
| 2.6.19.my
| no, it doesn't: it detect something in the pcmcia slot but it doesn't attach it
+
| a bit: it detects something generic in the pcmcia slot but it doesn't attach it
 +
| no, it doesn't
 
| pretty dirty status of sa1100 pcmcia sources
 
| pretty dirty status of sa1100 pcmcia sources
 
|-
 
|-
 
| Pi (cf + memorystick)
 
| Pi (cf + memorystick)
 +
| -
 
| -
 
| -
 
| -
 
| -
Line 141: Line 157:
 
|-
 
|-
 
| Barcode
 
| Barcode
 +
| -
 
| -
 
| -
 
| -
 
| -
Line 146: Line 163:
 
|-
 
|-
 
| NavMan
 
| NavMan
 +
| -
 
| -
 
| -
 
| -
 
| -
Line 151: Line 169:
 
|-
 
|-
 
| GSM
 
| GSM
 +
| -
 
| -
 
| -
 
| -
 
| -

Revision as of 23:05, 5 March 2009

info

check it out

first kernel tests

kernel (cross)compiled hacked ? compiling ? sleeve 2xpcmcia sleeve 1xpcmcia sleeve microdrive
2.6.12 gcc-4.1.0/host=ppc no, vanilla, defconfig no not tested, yet not tested, yet not tested, yet
2.6.13 gcc-4.1.0/host=ppc no, vanilla, defconfig no not tested, yet not tested, yet not tested, yet
2.6.14 gcc-4.1.0/host=ppc no, vanilla, defconfig no not tested, yet not tested, yet not tested, yet
2.6.15 gcc-4.1.0/host=ppc no, vanilla, myconfig yes not tested, yet not recognized not recognized
2.6.15 gcc-4.1.0/host=ppc no, vanilla, myconfig yes not tested, yet not recognized not recognized
2.6.19.hh4 seems "the one" gcc-4.1.0/host=ppc __, myconfig __ , patched file[]={arch/arm/common/ipaq/micro_ts.c arch/arm/configs/h3600_defconfig, arch/arm/mach-sa1100/h3600_lcd.c arch/arm/mach-sa1100/ipaq.c drivers/soc/micro.c} not tested, yet not tested, yet not tested, yet
2.6.19.my current working branch" gcc-4.1.0/host=ppc __, myconfig __ , patched ~file[]={sleeve, touchscreen} not tested, yet not tested, yet not tested, yet
2.6.21 gcc-4.1.0/host=ppc no, vanilla, myconfig yes not tested, yet recognized with an issue (conflict if ext3 is specified in /boot/params ... with ext2 it works) ... also no frame buffer support not recognized
2.6.21-hh gcc-4.1.0/host=ppc yes, myconfig yes not recognized stalled after kernel uncompress with a particular setting in the .config, CF recognized with an issue (conflict if ext3 is specified in /boot/params ... with ext2 it works) ... also frame buffer is working not recognized
2.6.28 gcc-4.1.0/host=ppc no, vanilla, myconfig yes not recognized recognized with an issue (conflict if ext3 is specified in /boot/params ... with ext2 it works) ... also no frame buffer support not tested, yet
2.6.29.colie gcc-4.1.0/host=ppc no, vanilla, myconfig yes not recognized recognized with an issue (conflict if ext3 is specified in /boot/params ... with ext2 it works)) frame buffer is working, backlighing is not working, RTC is working not tested, yet


status of sleeve hw with iPAQ 3600 kernel 2.6

device tested with kernel does it work ? any issue ? notes
Nexicam (cam + cf) so not tested yed - - i have no such hw
Nexicam 2x cf (+ broken ext batt) - - - i have no such hw
SilverSlider (1x cf) - - - i have no such hw
Compaq 1x pcmcia 2.6.19.my yes, nice not yet i am using this device with a pcmcia-to-CF2 adaptor in order to attach a microdrive
Compaq 1x pcmcia + ext. batt - - - i have no such hw, i think it should word as the batt-less version
Compaq 2x pcmcia 2.6.19.my a bit: it detects something generic in the pcmcia slot but it doesn't attach it no, it doesn't pretty dirty status of sa1100 pcmcia sources
Pi (cf + memorystick) - - - i have no such hw
Barcode - - - i have no such hw
NavMan - - - i have no such hw
GSM - - - i have no such hw

status

status @ 15-02-2009: iPAQ sleeve dual pcmcia doesn't work


support

something about support http://blog.gremlin.it/?m=200611