Flameman/ipaq/kernel
From eLinux.org
Contents |
info
reports
| kernel | (cross)compiled | hacked ? | compiling ? | sleeve 2xpcmcia | sleeve 1xpcmcia | sleeve microdrive |
|---|---|---|---|---|---|---|
| 2.6.12 | gcc-4.1.0/host=ppc | no, vanilla, defconfig | no | not tested, yet | not tested, yet | not tested, yet |
| 2.6.13 | gcc-4.1.0/host=ppc | no, vanilla, defconfig | no | not tested, yet | not tested, yet | not tested, yet |
| 2.6.14 | gcc-4.1.0/host=ppc | no, vanilla, defconfig | no | not tested, yet | not tested, yet | not tested, yet |
| 2.6.15 | gcc-4.1.0/host=ppc | no, vanilla, myconfig | yes | not tested, yet | not recognized | not recognized |
| 2.6.15 | gcc-4.1.0/host=ppc | no, vanilla, myconfig | yes | not tested, yet | not recognized | not recognized |
| 2.6.19.hh4 seems "the one" | gcc-4.1.0/host=ppc | __, myconfig | __ , patched file[]={arch/arm/common/ipaq/micro_ts.c arch/arm/configs/h3600_defconfig, arch/arm/mach-sa1100/h3600_lcd.c arch/arm/mach-sa1100/ipaq.c drivers/soc/micro.c} | not tested, yet | not tested, yet | not tested, yet |
| 2.6.21 | gcc-4.1.0/host=ppc | no, vanilla, myconfig | yes | not tested, yet | recognized with an issue (conflict if ext3 is specified in /boot/params ... with ext2 it works) ... also no frame buffer support | not recognized |
| 2.6.21-hh | gcc-4.1.0/host=ppc | yes, myconfig | yes | not recognized | stalled after kernel uncompress with a particular setting in the .config, CF recognized with an issue (conflict if ext3 is specified in /boot/params ... with ext2 it works) ... also frame buffer is working | not recognized |
| 2.6.28 | gcc-4.1.0/host=ppc | no, vanilla, myconfig | yes | not recognized | recognized with an issue (conflict if ext3 is specified in /boot/params ... with ext2 it works) ... also no frame buffer support | not tested, yet |
| 2.6.29.colie | gcc-4.1.0/host=ppc | no, vanilla, myconfig | yes | not recognized | recognized with an issue (conflict if ext3 is specified in /boot/params ... with ext2 it works)) frame buffer is working, backlighing is not working, RTC is working | not tested, yet |
status of sleeve hw
| device | tested with kernel | does it work ? | any issue ? | notes |
|---|---|---|---|---|
| Nexicam (cam + cf) | so not tested yed | - | - | i have no such hw |
| Nexicam 2x cf (+ broken ext batt) | - | - | i have no such hw | |
| SilverSlider (1x cf) | - | - | i have no such hw | |
| Compaq 1x pcmcia | 2.6.19.my | yes, nice | i am using this device with a pcmcia-to-CF2 adaptor in order to attach a microdrive | |
| Compaq 1x pcmcia + ext. batt | - | - | i have no such hw, i think it should word as the batt-less version | |
| Compaq 2x pcmcia | 2.6.19.my | no, it doesn't: it detect something in the pcmcia slot but it doesn't attach it | pretty dirty status of sa1100 pcmcia sources | |
| Pi (cf + memorystick) | - | - | i have no such hw | |
| Barcode | - | - | i have no such hw | |
| NavMan | - | - | i have no such hw | |
| GSM | - | - | i have no such hw |
status
status @ 15-02-2009: iPAQ sleeve dual pcmcia doesn't work
support
something about support http://blog.gremlin.it/?m=200611
