check it out
first kernel tests
| kernel
|
(cross)compiled
|
hacked ?
|
compiling ?
|
sleeve 2xpcmcia
|
sleeve 1xpcmcia
|
sleeve microdrive
|
| 2.6.12
|
gcc-4.1.0/host=ppc
|
no, vanilla, defconfig
|
no
|
not tested, yet
|
not tested, yet
|
not tested, yet
|
| 2.6.13
|
gcc-4.1.0/host=ppc
|
no, vanilla, defconfig
|
no
|
not tested, yet
|
not tested, yet
|
not tested, yet
|
| 2.6.14
|
gcc-4.1.0/host=ppc
|
no, vanilla, defconfig
|
no
|
not tested, yet
|
not tested, yet
|
not tested, yet
|
| 2.6.15
|
gcc-4.1.0/host=ppc
|
no, vanilla, myconfig
|
yes
|
not tested, yet
|
not recognized
|
not recognized
|
| 2.6.15
|
gcc-4.1.0/host=ppc
|
no, vanilla, myconfig
|
yes
|
not tested, yet
|
not recognized
|
not recognized
|
| 2.6.19.hh4 seems "the one"
|
gcc-4.1.0/host=ppc
|
__, myconfig
|
__ , patched file[]={arch/arm/common/ipaq/micro_ts.c arch/arm/configs/h3600_defconfig, arch/arm/mach-sa1100/h3600_lcd.c arch/arm/mach-sa1100/ipaq.c drivers/soc/micro.c}
|
not tested, yet
|
not tested, yet
|
not tested, yet
|
| 2.6.19.my current working branch"
|
gcc-4.1.0/host=ppc
|
__, myconfig
|
__ , patched ~file[]={sleeve, touchscreen}
|
not tested, yet
|
not tested, yet
|
not tested, yet
|
| 2.6.21
|
gcc-4.1.0/host=ppc
|
no, vanilla, myconfig
|
yes
|
not tested, yet
|
recognized with an issue (conflict if ext3 is specified in /boot/params ... with ext2 it works) ... also no frame buffer support
|
not recognized
|
| 2.6.21-hh
|
gcc-4.1.0/host=ppc
|
yes, myconfig
|
yes
|
not recognized
|
stalled after kernel uncompress with a particular setting in the .config, CF recognized with an issue (conflict if ext3 is specified in /boot/params ... with ext2 it works) ... also frame buffer is working
|
not recognized
|
| 2.6.28
|
gcc-4.1.0/host=ppc
|
no, vanilla, myconfig
|
yes
|
not recognized
|
recognized with an issue (conflict if ext3 is specified in /boot/params ... with ext2 it works) ... also no frame buffer support
|
not tested, yet
|
| 2.6.29.colie
|
gcc-4.1.0/host=ppc
|
no, vanilla, myconfig
|
yes
|
not recognized
|
recognized with an issue (conflict if ext3 is specified in /boot/params ... with ext2 it works)) frame buffer is working, backlighing is not working, RTC is working
|
not tested, yet
|
status of sleeve hw with iPAQ 3600 kernel 2.6
| device
|
tested with kernel
|
does it work ?
|
any issue ?
|
notes
|
| Nexicam (cam + cf)
|
so not tested yed
|
-
|
-
|
i have no such hw
|
| Nexicam 2x cf (+ broken ext batt)
|
-
|
-
|
-
|
i have no such hw
|
| SilverSlider (1x cf)
|
-
|
-
|
-
|
i have no such hw
|
| Compaq 1x pcmcia
|
2.6.19.my
|
yes, nice
|
not yet
|
i am using this device with a pcmcia-to-CF2 adaptor in order to attach a microdrive
|
| Compaq 1x pcmcia + ext. batt
|
-
|
-
|
-
|
i have no such hw, i think it should word as the batt-less version
|
| Compaq 2x pcmcia
|
2.6.19.my
|
a bit: it detects something generic in the pcmcia slot but it doesn't attach it
|
no, it doesn't
|
pretty dirty status of sa1100 pcmcia sources
|
| Pi (cf + memorystick)
|
-
|
-
|
-
|
i have no such hw
|
| Barcode
|
-
|
-
|
-
|
i have no such hw
|
| NavMan
|
-
|
-
|
-
|
i have no such hw
|
| GSM
|
-
|
-
|
-
|
i have no such hw
|
status
http://www.elinux.org/Flameman/status
